Poly(hydroxybutyrate‐co‐hydroxyvalerate)/titanium dioxide nanocomposites: A degradation study

Nanocomposites, based on a poly(hydroxybutyrate‐co‐hydroxyvalerate) (PHBV) matrix and titanium dioxide (TiO₂) nanoparticles and fabricated with a solvent‐casting technique, were characterized with differential scanning calorimetry, thermogravimetric analysis, scanning electron microscopy, and Fourier transform infrared spectroscopy. The content of TiO₂ nanoparticles varied between 0.5 and 10 wt %. Degradation studies, including hydrolytic degradation in a strong base medium (1N NaOH) and degradation under ultraviolet light at 365 nm, were performed. It was confirmed that the inorganic filler had no great influence on thermal properties such as the melting and crystallization temperatures. Improved degradation temperatures were also confirmed with the increase in the filler content. Degradation observations confirmed significant increases in hydrolytic erosion with the filler content increasing in comparison with the degradation of a pure PHBV film. Also, the photocatalytic activity of the inorganic filler TiO₂ in all investigated composites [irradiated at λ = 365 nm and immersed in a liquid medium (H₂O)] was evaluated. The degraded samples were analyzed with Fourier transform infrared spectroscopy, which confirmed their increased crystallinity. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Preparation and properties of melt‐blended polylactic acid/polyethylene glycol‐modified silica nanocomposites

One commercial type of fumed silica modified with methoxy polyethylene glycol (mPEG) plasticizer was incorporated into polylactic acid (PLA) biobased polymer to improve its performance. The modification on silica was confirmed through Fourier transform infrared spectra, nuclear magnetic resonance, and TGA assessments. The grafting percentage of mPEG onto silica was about 19.8 wt %. Transmission electron microscope revealed a similar degree of dispersion for control silica and modified silica‐filled PLA nanocomposites. Not much difference in the glass transition temperatures at various silica contents was found for PLA/control silica systems from the differential scanning calorimetry measurement, but the glass transition temperature of PLA/modified silica nanocomposite at 10 phr of modified silica showed up to 11°C decrement. It was suggested that the mPEG plasticizer efficiently plasticized the PLA matrix through the enhanced segmental mobility of PLA chains. Young's modulus of PLA was about 2133 ± 53 MPa, and the value for the nanocomposite increased to 2547 ± 54 MPa at 10 of phr control silica mainly due to the reinforcing effect from nanoparticles. For modified silica, Young's modulus decreased at various silica contents. The elongation at break for modified silica‐filled cases was higher than that of control silica‐filled cases. These results were attributed to the plasticizing effect of surface modifier. Optical transmittance for pristine PLA was generally in a similar order as PLA/control silica and modified silica cases at various silica contents. The results agreed with the morphology observation as well. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Biodegradation paths of Mater‐Bi®/kenaf biodegradable composites

Composites obtained from biodegradable polymers and natural–organic fillers are attracting increasing interest, thanks to the environmental advantages they promise. On the other hand, the real biodegradation performance of a biodegradable polymer/natural organic filler composite should be assessed by performing specific biodegradation tests. These are often carried out under laboratory conditions, but more realistic conditions should be taken into account. In this work, a systematic study on the biodegradation of kenaf fiber‐filled Mater‐Bi® composites in different environments is presented, and some interesting parameters for the understanding of the optimum way to obtain a fast degradation of the composites can be extrapolated. In particular, it was found that the presence of the fibers, the environmental conditions, and the manufacturing procedures of the composites can significantly affect the biodegradation behavior. The results can be used to determine the most suitable disposal environments for biodegradation of Mater‐Bi®‐based wastes. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Thermal properties and degradation behavior of poly(1,4‐butylene adipate)/modified layered double hydroxide nanocomposites

In this study, poly(1,4‐butylene adipate) (PBA)/organomodified layered double hydroxide (m‐LDH) nanocomposites were synthesized and characterized as a new material for green materials use. m‐LDH was initially prepared with magnesium nitrate hexahydrate, aluminum nitrate‐9‐hydrate, oleic acid, and sorbitol by a novel one‐step coprecipitation method to intercalate the oleic acid and sorbitol organomodifier into the interlayer of the layered double hydroxide. The solution mixing process was then applied and shown to be an efficient method for fabricating the PBA/m‐LDH nanocomposites. The m‐LDH characterized by X‐ray diffraction (XRD) showed a high interlayer spacing of 58.8 Å. The morphology and thermal properties of the PBA/m‐LDH nanocomposites were characterized with XRD, transmission electron microscopy, and thermogravimetric analysis. It was shown that the m‐LDH was well distributed in the PBA matrix and that the thermal properties of the PBA/m‐LDH nanocomposites significantly improved with a loading of 0.1 wt % m‐LDH. Finally, the biodegradability of the PBA/m‐LDH nanocomposites was tested with lipase from Pseudomonas fluorescens as a microbial catalyst. It was shown that an addition of m‐LDH up to 0.5% resulted in a significant difference in terms of the biodegradability. After 120 h of degradation, the residual weight and surface morphology of the composite films were affected by the presence of m‐LDH. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42083.     

Morphology and property changes in PLA/PHBV blends as function of blend composition

PLA/PHBV blends were prepared by melt mixing. The morphology and physical properties of the blends and neat polymers were investigated. Scanning electron microscopy (SEM) studies provided evidence of interfacial cavities and weak interfacial interaction between the two polymers, and no obvious co-continuous morphology was observed in any of the investigated blends. Positron annihilation lifetime spectroscopy (PALS) indicated the presence of open-volume cavities with sub-nanometre diameters; far smaller than observed from the SEM images. The mean size and relative concentration of these cavities increased with increasing PHBV content. A weak negative deviation in the mean size for low PHBV content possibly indicates some degree of partial miscibility. The glass transition temperature of PLA in the blends decreased with increasing PHBV content, and offers support to some PHBV being miscible with the PLA. The degree of crystallinity in the blends show interesting behaviour that may be explained in terms of the complex morphology observed for these blends. The thermal conductivity of the samples varied with composition, but increased with increasing PHBV content, which was probably related to the increasing crystallinity. Both the tensile strength and Young’s modulus decreased with increasing PHBV content for the sequence of blends, and both parameters exhibited maximum values for 10 wt.% PHBV. For samples between 50/50 and 10/90 PLA/PHBV the tensile strength and Young’s modulus were comparable to or lower than those for both the neat polymers.     

The morphology and degradation behavior of electrospun poly(3‐hydroxybutyrate)/Magnetite and poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate)/Magnetite composites

Electrospinning of biodegradable poly(3‐hydroxybutyrate) (PHB)/magnetite and poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) (PHBV)/magnetite composites in 2,2,2‐trifluoroethanol (TFE) and chloroform are investigated to develop nonwoven nanofibrous structure. Ultrafine PHB/magnetite fibers are obtained and the resulting fiber diameters are in the range of 690–710 nm and 8.0–8.4 µm for the polymer dissolved in TFE and chloroform. The surface of PHB composites fiber fabricated in chloroform contains porous structures, which are not observed for the sample of PHB composites fiber dissolved in TFE. The fiber diameters for PHBV5/magnetite composites are in the range of 500–540 nm and 2.3–2.5 µm, depending on the use of TFE and chloroform. The average diameters of PHBV5/magnetite composite fibers are smaller than those of PHB/magnetite composites fiber. All electrospun PHB/magnetite and composite fibers are superparamagnetic. The degradation behaviors of PHB/magnetite and PHBV5/magnetite composite fibers were investigated using Caldimonas manganoxidans. For the fabricated composite fibers, it is found that the degradation rate increased with the increasing loading of magnetite nanoparticles. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 41070.     

Mechanical and thermal flow properties of wood flour–biodegradable polymer composites

Wood flour (WF)–polycaprolactone (PCL) and polybutylenesuccinate–butylenecarbonate (PBSC) composites were prepared by knead processing. The effects of a compatibilizer on the tensile and thermal flow properties of the composites were investigated. PCL‐graft‐maleic anhydride (PCL‐g‐MA) was used as a compatibilizer. Tensile properties were improved by adding PCL‐g‐MA to both composites. The tensile strength and Young's modulus were increased from 13 to 27 MPa and 581 to 1011 MPa in WF–PCL (50/50, w/w) composites, respectively, and from 17 to 28 MPa and 814 to 1007 Mpa in WF–PBSC (50/50, w/w) composites, respectively, with the addition of 5% PCL‐g‐MA. Elongation at break increased from 4 to 7% and from 3 to 6% in the WF–PCL and the WF–PBSC composites, respectively. Tensile strength was further increased with increasing WF content in the presence of PCL‐g‐MA. Thermal flow temperature and melt viscosity of the composites were increased, and water absorption and thickness swelling were improved with the addition of PCL‐g‐MA. It was found from the burial test that all composites were more than 40% degraded within 6 weeks, and there was no considerable difference in degradation between composites with PCL‐g‐MA and those without. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 1900–1905, 2003     

Enhanced mechanical and thermal properties of biodegradable poly(butylene succinate‐co‐adipate)/graphene oxide nanocomposites via in situ polymerization

Poly(butylene succinate‐co‐butylene adipate) (PBSA)/graphene oxide (GO) nanocomposites were synthesized via in situ polymerization for the first time. Atomic force microscopy demonstrated the achievement of a single layer of GO, and transmission electron microscopy proved the homogeneous distribution of GO in the PBSA matrix. Fourier transform infrared spectroscopy results showed the successful grafting of PBSA chains onto GO. With the incorporation of 1 wt % GO, the tensile strength and flexural modulus of the PBSA were enhanced by 50 and 27%, respectively. The thermal properties characterized by differential scanning calorimetry and thermogravimetric analysis showed increases in the melting temperatures, crystallization temperatures, and thermal stability. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 130: 4075–4080, 2013     

Sustainable biodegradable coffee grounds filler and its effect on the hydrophobicity,mechanical and thermal properties of biodegradable PBAT composites

Poly(butylene adipate‐co‐terephthalate) (PBAT) and coffee grounds (CG) wastes are biodegradable materials. The high cost of PBAT restricts its marketability; the lignocellulosic CG were used as a reinforcing agent for PBAT. Thus, the present work focuses mainly on the preparation and characterization of bio‐based PBAT composites filled with CG bio‐additives with affordable cost, and with potential use in a variety of eco‐friendly fields such as packaging, biomedical devices, and composting. The PBAT polymer was melt blended with various contents of CG powder using twin screw extrusion. The compatibility and dispersion state of investigated biocomposites in presence or absence of PEG as plasticizer were investigated by using scanning electron microscopy (SEM) and X‐ray diffraction (XRD). The effect of the addition of PEG on PBAT/CG was characterized by differential scanning calorimetry (DSC), tensile properties, contact angle measurements, and thermogravimetric analysis. The chemical interaction between hydroxyl groups of CG particles and PEG plasticizer was achieved by these techniques. A pyrolysis kinetic model was proposed to identify the kinetic parameters of the thermal degradation of PBAT and CG powder. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44498.     

Blends of poly(d,l‐lactide) with polyhedral oligomeric silsesquioxanes‐based biodegradable polyester: Synthesis,morphology, miscibility,and mechanical property

A highly branched hybrid copolymer based on polyhedral oligomeric silsesquioxane (POSS) was designed to improve the brittleness of poly(d,l‐lactide) (PDLLA). The toughening material was synthesized using POSS‐OH as the core, which initiated the ring‐opening polymerization of ε‐caprolactone and d,l‐lactide sequentially to form the highly branched POSS‐g‐poly (ε‐caprolactone)‐b‐poly(d,l‐lactide) (POSS‐g‐PCL‐b‐PLA) copolymer with eight PCL‐b‐PLA arms. The POSS‐g‐PCL‐b‐PLA copolymer had a very good dispersion in the PDLLA matrix with the size of microdomains smaller than 1 µm when added at a low content below 10 wt %. In related to the nano‐scale size of microdomains in the blends, the crystallinity of PCL blocks was significantly suppressed. Thus, the addition of POSS‐g‐PCL‐b‐PLA is very effective to improve the roughness of the matrix polymer when added at a low content. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40776.     

Graphene oxide reinforced chitosan/polyvinylpyrrolidone polymer bio‐nanocomposites

Bio‐nanocomposite films based on chitosan/polyvinylpyrrolidone (CS/PVP) and graphene oxide (GO) were processed using the casting/evaporation technique. It has been found that the three components of bio‐nanocomposites can be easily mixed in controlled conditions enabling the formation of thick films with high quality, smooth surface and good flexibility. Structural and morphological characterizations showed that the GO sheets are well dispersed in the CS/PVP blend forming strong interfacial interactions that provide an enhanced load transfer between polymer chains and GO sheets thus improving their properties. It has been found that the water resistance of the CS/PVP blend is improved, and the hydrolytic degradation is limited by addition of 0.75 and 2 wt % GO. The modulus, strength, elongation and toughness of the bio‐nanocomposites are together increased. Herein, the steps to form new bio‐nanocomposite films have been described, taking the advantage of the combination of CS, PVP and GO to design the aforementioned bio‐nanocomposite films, which allow to have extraordinary properties that would have promising applications as eventual packaging materials. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 41042.     

Morphology and mechanical properties of polypropylene/polyamide 6 nanocomposites prepared by a two‐step melt‐compounding process

Polypropylene/polyamide 6 blends and their nanocomposites with layered silicates or talc were prepared in a melt‐compounding process to explore their mechanical performance. The thermomechanical behavior, crystallization effects, rheology, and morphology of these materials were studied with a wide range of experimental techniques. In all cases, the inorganic filler was enriched in the polyamide phase and resulted in a phase coarsening of the polypropylene/polyamide nanocomposite in comparison with the nonfilled polypropylene/polyamide blend. The mechanical properties of these nanoblends were consequently only slightly better than those of the pure polymers with respect to the modulus, whereas the impact level was below that of the pure polymers, reflecting the heterogeneity of the nanoblend. Polymer‐specific organic modification of the nanoclays did not result in a better phase distribution, which would be required for better overall performance. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 283–291, 2006     

Effect of zeolite filler on the thermal degradation kinetics of polypropylene

In this study, the thermal degradation behavior of polypropylene (PP) and PP–zeolite composites was investigated. Clinoptilolite, a natural zeolitic tuff, was used as the filler material in composites. The effects of both pure clinoptilolite and silver‐ion‐exchanged clinoptilolite on the thermal degradation kinetics of the PP composites was studied with differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). Polymer degradation was evaluated with DSC at heating rates of 5, 10, and 20°C/min from room temperature to 500°C. The silver concentration (4.36, 27.85, and 183.8 mg of Ag/g of zeolite) was the selected parameter under consideration. From the DSC curves, we observed that the heat of degradation values of the composites containing 2–6% silver‐exchanged zeolite (321–390 kJ/kg) were larger than that of the pure PP (258 kJ/kg). From the DSC results, we confirmed that the PP–zeolite composites can be used at higher temperatures than the pure PP polymer because of its higher thermal stability. The thermal decomposition activation energies of the composites were calculated with both the Kissinger and Ozawa models. The values predicted from these two equations were in close agreement. From the TGA curves, we found that zeolite addition into the PP matrix slowed the decomposition reaction; however, silver‐exchanged zeolite addition into the matrix accelerated the reaction. The higher the silver concentration was, the lower were the thermal decomposition activation energies we obtained. As a result, PP was much more susceptible to thermal decomposition in the presence of silver‐exchanged zeolite. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 143–148, 2006     

Solid state 13C‐NMR study of a plasticized PLA/PHB polymer blend

High‐resolution solid‐state ¹³C nuclear magnetic resonance spectra and ¹³C spin–lattice relaxation times T₁(¹³C) are used to characterize the structure of a polymer blend prepared from poly(lactic acid) (85 wt %) and poly(3‐hydroxybutyrate) (15 wt %) and the effect of the plasticizer triacetine on the structure and molecular dynamics of the blend. Single‐pulse and cross‐polarization magic angle spinning ¹³C nuclear magnetic resonance spectra indicate that the nonplasticized polymer blend consists of semicrystalline poly(3‐hydroxybutyrate) domains built into an amorphous poly(lactic acid) matrix. Triacetine supports formation of the crystalline regions within both polymer components in the blend. Spin–lattice relaxation times of carbonyl carbons indicate that the nonplasticized polymer blend consists of noninteracting chains of blended polymers and plasticization of the polymer blend increases the relaxation rate. The glass transition, cold crystallization, and melting processes of the nonplasticized and plasticized blends were also studied using differential scanning calorimetry methods. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46296.     

Effects of nano‐tio2 on the performance of high‐amylose starch based antibacterial films

The purpose of this article is to investigate the effects of nano‐tianium dioxide (nano‐TiO₂) on the high‐amylose starch/polyvingl alcohol (PVA) blend films prepared by a solution casting method. The results show that at the concentration of 0.6% of nano‐TiO₂, the film demonstrated the best tensile strength at 9.53 MPa, and the elongation at break was noted as 49.50%. The optical transmittance of the film was decreased and the water resistance was improved with further increase of the concentration of nano‐TiO₂. Using the techniques of Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), and field‐emission scanning electron microscopy (SEM), the molecular and the crystal structures of the films were characterized. The results indicate that the miscibility and compatibility between high‐amylose starch and PVA were increased with the addition of nano‐TiO₂ into the films due to the formation of hydrogen and C? O? Ti bonds. The antimicrobial activities of the blend films were also explored. The results show that there were inhibitory zones around the circular film disc, which is attributable to the addition of nano‐TiO₂. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42339.     

Melt‐processed biodegradable polyester blends of poly(L‐lactic acid) and poly(ε‐caprolactone): Effects of processing conditions on biodegradation

Biodegradable polyester blends were prepared from poly(L ‐lactic acid) (PLLA) and poly(ε‐caprolactone) (PCL) (50/50) by melt‐blending, and the effects of processing conditions (shear rate, time, and strain) of melt‐blending on proteinase‐K‐ and lipase‐catalyzed enzymatic degradability were investigated using gravimetry, differential scanning calorimetry, and scanning electron microscopy. The proteinase‐K‐catalyzed degradation rate of the blend films increased and leveled off with increasing the shear rate, time, or strain for melt‐blending, except for the shortest shear time of 60 s. The optimal processing conditions of melt‐blending giving the maximum rate of lipase‐catalyzed degradation were 9.6 × 10² s^?1 and 180 s, whereas a deviation from these conditions caused a reduction in lipase‐catalyzed enzymatic degradation rate. At the highest shear rate of 2.2 × 10³ s^?1, PCL‐rich phase was continuous in the blend films, irrespective of the shear time (or shear strain), whereas PLLA‐rich phase changed from dispersed to continuous by increasing the shear time (or shear strain). This study revealed that the biodegradability of PLLA/PCL blend materials can be manipulated by altering the processing conditions of melt‐blending (shear rate, time, or strain) or the sizes and morphology of PLLA‐rich and PCL‐rich domains. The method reported in the present study can be utilized for controlling the biodegradability of other biodegradable polyester blends. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 831–841, 2007     

A new modified silicone–TiO2 polymer composite film and its photocatalytic degradation

The photodegradation of the silicone surfactant–TiO₂ composite films was characterized by FTIR, Raman spectroscopy, and scanning electron microscope. After photocatalytic degradation, the FTIR Si? O? Si peak intensity of the composite film remained unchanged, implying no cleavage of Si? O? Si bond. The above Si? O? Si peak intensity is sensitive to the polyoxyethylene chain length of the composite. The PEG10000‐silicone composite is more resistant to photodegradation than those composites with lower molecular weight of constituent PEGs. The wetting rates of the silicone surfactant–TiO₂ composites showed that modified silicone composite films exhibited hydrophobic nature. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 3341–3344, 2006     

Poly (ethylene oxide) (PEO) influence on mechanical,thermal, and degradation properties of PLA/PBSeT blends

Poly (lactic acid) (PLA) is an important biodegradable plastic with unique properties. However, its widespread application is hindered by its low miscibility and suboptimal degradation properties. To overcome these limitations, we investigated the mechanical, thermal, and degradation properties of PLA and poly (butylene sebacate-co-terephthalate) (PBSeT) blends in the presence of poly (ethylene oxide) (PEO). Specifically, this study aimed to identify the effects of PEO as a compatibilizer and hydrolysis accelerator in PLA/PBSeT blends. PLA (80%) and PBSeT (20%) were melt blended with various PEO contents (2–10 phr), and their mechanical, thermal, and hydrolytic properties were analyzed. All PEO-treated blends exhibited a higher elongation at break than that of the control sample, and the tensile strength was slightly reduced. In the PEO 10% sample, the elongation at break increased to 800% of that of the control sample. Differential scanning chromatography (DSC) analysis confirmed that when PEO was added to the PLA/PBSeT blends, the two glass transition temperatures (T_g) narrowed, resulting in improved miscibility of PLA and PBSeT. In addition, the hydrolytic degradation of the PLA/PBSeT/PEO blend accelerated as the PEO content increased. It was confirmed that PEO can act as a compatibilizer and hydrolysis-accelerating agent for PLA/PBSeT blends.     

Preparation and degradation of PLA/chitosan composite materials

As scaffold material, poly(lactic acid) (PLA) has several obvious weaknesses, such as fast biodegradation, acidic degradation product, and hydrophobicity. To solve these problems, a series of PLA/chitosan composite materials was prepared in this study. SEC observation, porosity tests and contact angle measurements showed that the materials were hydrophilic and had appropriate porosity and structure, which were favorable to the cell growth. Degrading tests in vitro indicated that the degrading speeds of the materials were slower than that of PLA, and the materials could keep adjacently litmusless, certain shape and mechanical properties. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 274–277, 2004     

Mechanical and thermal properties of SEBS‐g‐MA compatibilized halloysite nanotubes reinforced polyethylene terephthalate/polycarbonate/nanocomposites

In this study, the effect of maleic anhydride grafted styrene‐ethylene‐butylene‐styrene (SEBS‐g‐MA) content on mechanical, thermal, and morphological properties of polyethylene terephthalate/polycarbonate/halloysite nanotubes (PET/PC/HNTs) nanocomposites has been investigated. Nanocomposites of PET/PC (70 : 30) with 2 phr of HNTs were compounded using the counter rotating twin screw extruder. A series of formulations were prepared by adding 5–20 phr SEBS‐g‐MA to the composites. Incorporation of 5 phr SEBS‐g‐MA into the nanocomposites resulted in the highest tensile and flexural strength. Maximum improvement in the impact strength which is 245% was achieved at 10 phr SEBS‐g‐MA content. The elongation at break increased proportionately with the SEBS‐g‐MA content. However, the tensile and flexural moduli decreased with increasing SEBS‐g‐MA content. Scanning electron microscopy revealed a transition from a brittle fracture to ductile fracture morphology with increasing amount of SEBS‐g‐MA. Transmission electron microscopy showed that the addition of SEBS‐g‐MA into the nanocomposites promoted a better dispersion of HNTs in the matrix. A single glass transition temperature was observed from the differential scanning calorimetry test for compatibilized nanocomposites. Thermogravimetric analysis of PET/PC/HNTs nanocomposites showed high thermal stability at 15 phr SEBS‐g‐MA content. However, on further addition of SEBS‐g‐MA up to 20 phr, thermal stability of the nanocomposites decreased due to the excess amount of SEBS‐g‐MA. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42608.