Synthesis and characterization of paraffin/TiO2‐P(MMA‐co‐BA) phase change material microcapsules for thermal energy storage

Microcapsules based on a phase changing paraffin core and modified titanium dioxide–poly(methyl methacrylate‐co‐butyl acrylate) [P(MMA‐co‐BA)] hybrid shell were prepared via a Pickering emulsion method in this study. The microcapsules exhibit an irregularly spherical morphology with the size range of 3–24 µm. The addition of BA can enhance the toughness of the brittle polymer poly(methyl methacrylate) and improve the thermal reliability of the phase change microcapsules. The ratio of BA/MMA is in the range of 0.09–0.14, and the ratio of the monomer/paraffin is varied from 0.45 to 0.60. These microcapsules exhibit a well‐defined morphology and good thermal stability. The actual core content of the microcapsules reaches 36.09%, with an encapsulation efficiency of 73.07%. Furthermore, the prepared microcapsules present the high thermal reliability for latent‐heat storage and release after 2000 thermal cycles. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46447.     

Preparation and properties of phase‐change heat‐storage UV curable polyurethane acrylate coating

Phase‐change heat‐storage UV curable polyurethane acrylate (PUA) coating was prepared by applying microencapsulated phase change materials (microPCMs) to PUA coating. MicroPCMs containing paraffin core with melamine‐formaldehyde shell were synthesized by in situ polymerization. The effect of stirring speed, emulsification time, emulsifier amount, and core/shell mass ratio on particle size, morphology, and phase change properties of the microPCMs was studied by using laser particle size analyzer, Fourier transform infrared spectroscopy, X‐ray photoelectron spectroscopic analysis, scanning electron microscopy, and differential scanning calorimetry. The results showed that the diameter of the microcapsules decreased with the increase of stirring speed, emulsification time, and emulsifier amount. When the mass ratio of emulsifier to paraffin is 6%, microcapsules fabricated with a core/shell ratio of 75/25 have a compact surface and a mean particle size of 30 μm. The sample made under the above conditions has a higher efficiency of microencapsulation than other samples and was applied to PUA coating. The dispersion of microPCMs in coating and heat‐storage properties of the coating were investigated. The results illustrated that the phase‐change heat‐storage UV curable PUA coating can store energy and insulate heat. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41266.     

Improvements in the thermal conductivity and mechanical properties of phase‐change microcapsules with oxygen‐plasma‐modified multiwalled carbon nanotubes

The thermal properties and mechanical properties are the key factors of phase‐change microcapsules (microPCMs) in energy‐storage applications. In this study, microPCMs based on an n‐octadecane (C18) core and a melamine–urea–formaldehyde (MUF) shell supplemented with O₂‐plasma‐modified multiwalled carbon nanotubes (CNTs) were synthesized through in situ polymerization. Meanwhile, two different addition methods, the addition of modified CNTs into the emulsion system or into the polymer system, were compared and examined. Scanning electron microscopy micrographs showed that the microPCMs were spherical and had a broadened size distribution. Fourier transform infrared testing demonstrated that the modified CNTs did not affect C18 coated by MUF resin. The results indicate that the thermal conductivity and mechanical properties of the microPCMs were remarkably improved by the addition of a moderate amount of modified CNTs, but the heat enthalpy and encapsulated efficiency decreased slightly. Moreover, the thermal conductivity and mechanical properties of microPCMs modified with CNTs directly added to the polymer system were superior to those with CNTs added to emulsion system. In particular, when 0.2 g of modified CNTs were added to the polymer system, the thermal conductivity of the microPCMs was improved by 225%, and the breakage rates of the microPCMs at 4000 rpm for 5, 10, and 20 min decreased by 74, 72, and 60%, respectively, compared with that of the microPCMs without modified CNTs. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 45269.     

Interface stability behaviors of methanol‐melamine‐formaldehyde shell microPCMs/epoxy matrix composites

Microcapsules containing phase change materials (microPCMs) have been widely applied in smart temperature‐controlling materials. Interface stability plays a key role in these microPCMs/matrix composites. The aim of this study was to investigate the interface stability behaviors of methanol‐melamine‐formaldehyde (MMF) shell microPCMs containing paraffin/epoxy matrix composites. MMF prepolymer can be applied to fabricated microcapsules with smooth shells. The average diameter of the microPCMs could be controlled in the range of 5–45 μm by stirring speed of 500–6,000 r min⁻¹. From the SEM morphologies of the interphase between the microPCMs and the epoxy‐matrix, it is concluded that the interaction may be enhanced by MMF graft structure due to the increasing of molecular interaction in the interface. During a repeated heat‐transmission process, not only the repeated‐times of thermal absorbing‐releasing process will damage the interface bonding, but also higher thermal conductive speed will make the interface bearing more debonding stress. Large microPCMs in matrix may supply better interface stability. Moreover, the numerical and experimental results are consistent to obtain a clear insight into the rule of interface debonding for microPCMs/matrix composites that the interface perfection can be enhanced by increasing the thickness of interphase. POLYM. COMPOS., 2011. © 2011 Society of Plastics Engineers     

Preparation and characterization of polyurethane microcapsules containing n‐octadecane with styrene‐maleic anhydride as a surfactant by interfacial polycondensation

A series of polyurethane microcapsules containing a phase change material (PCM) of n‐octadecane was successfully synthesized by an interfacial polymerization in aqueous styrene‐maleic anhydride (SMA) dispersion with diethylene triamine (DETA) as a chain extender reacting with toluene‐2,4‐diisocyanate (TDI). The average diameter of microPCMs is in the range of 5–10 μm under the stirring speed of 3000–4000 rpm. Optical and SEM morphologies of microPCMs had ensured that the shell was regularly fabricated with the influence of SMA. FTIR results confirmed that the shell material was polyurethane and the SMA chains associated on core material reacted with TDI forming a part of shell material. The shell thickness was decreasing in the range of 0.31–0.55 μm with the molar ratio of DETA/TDI from 0.84 to 1.35 and the weight of core material increasing from 40 to 80% (wt %). By controlling the weight ratio of PCM as 40, 50, 60, 70, and 80% in microPCMs, it was found using DSC that the T_m and T_c of microPCMs were in the range of 29.8–31.0^oC and 21.1–22.0°C and an obvious phase change had been achieved nearly the same temperature range of that of PCM. The results from release curves of microPCM samples prepared by 1.4, 1.7, and 2.0 g of SMA indicated the release properties were affected by the amount of the dispersant, which attributed to the emulsion effect and shell polymerization structure. The above results suggest that the shell structure of microPCMs can be controlled and the properties of microPCMs determined by shell will perform proper practical usage. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 4996–5006, 2006     

Preparation and properties of microcapsule with EVA core‐PU shell structure

Microcapsule with poly(ethylene‐co‐vinylacetate) (EVA) core‐polyurethane (PU) shell structure was synthesized by interfacial polymerization in aqueous polyol dispersion with ethylene diamine as the chain extender of toluene diisocyanate in poly(vinyl alcohol) aqueous solution as the stabilizing agent. The effects of polyol constituent on the average particle size and distributions, morphologies, color strength, and friction fastness of core‐shell particles were investigated to design microcapsule. The friction fastness of printed fabrics with EVA core‐PU shell microcapsules became the increase to 4–5 grades. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 893–902, 2007     

Expansion space and thermal stability of microencapsulated n‐octadecane

5.0–50.0 vt% of cyclohexane was mixed with 95.0–50.0 vt% of n‐octadecane as the oil‐phase during the emulsion process in the in situ polymerization of melamine‐formaldehyde. By heat‐treating the microcapsules in an oven at 100°C, the cyclohexane was removed and expansion space was formed inside the microcapsules. The microcapsules were characterized by using FTIR, SEM, DSC, TGA, and gas chromatography. When the microcapsules are heat‐treated at temperatures higher than 180°C, Tm, ΔHm, Tc, and ΔHc of the microcapsules decrease. The attenuation of enthalpy of the microcapsules containing expansion space is obviously lower than that of the control sample, however. The permeability of the microcapsule shell decreases with the increase of cyclohexane content. There is a maximum between the thermal stabilities of the microcapsules and the cyclohexane contents. The microcapsules synthesized with 30.0–40.0 vt% of cyclohexane have the highest thermal stabilities, with 230°C and 289°C in air and nitrogen atmosphere, respectively. The thermal stable temperatures are approximately 67°C and 102°C higher than that of the control sample, respectively. The expansion space inside the microcapsules allows the n‐octadecane to expand in the temperature rising process and exert lower pressure to the shell, therefore keeping the shell intact and increasing the thermal stabilities of the microcapsules. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 97: 390–396, 2005     

Preparation of polyacrylate/paraffin microcapsules and its application in prolonged release of fragrance

The purpose of the present work was to develop a fragrance encapsulation system using polyacrylate/paraffin microcapsules. The Polyacrylate/paraffin microcapsules were fabricated by the method of suspension polymerization in Pickering emulsion. Morphology, size distribution, and thermal resistance of polyacrylate/paraffin microcapsules were investigated by scanning electron microscopy, light scattering particle size analyzer, and thermogravimetric analyzer. Results indicated that the crosslinked PMMA/paraffin microcapsules and P(MMA‐co‐BMA)/paraffin microcapsules prepared under optimal conditions presented regular spherical shape and similar size distribution. The crosslinked P(MMA‐co‐BMA)/paraffin microcapsules exhibited better thermal stability, with a thermal resistance temperature up to 184 °C. Fragrance microcapsules were prepared by encapsulating fragrance into crosslinked P(MMA‐co‐BMA)/paraffin microcapsules. The prolonged release performance of fragrance microcapsules was measured by ultraviolet‐visible near‐infrared spectrophotometer. 63.9% fragrance was retained after exposing fragrance microcapsules in air for 3 months, and the fragrance continued to release over 96 h in surfactant solution (sodium lauryl sulfonate, 20 wt %). © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 44136.     

Multi‐responsive polymeric microcontainers for potential biomedical applications: synthesis and functionality evaluation

Temperature and pH responsive poly(N‐isopropylacrylamide‐co‐methacrylic acid) (P(NIPAAm‐co‐MAA)) microcontainers with encapsulated magnetic nanoparticles in the shell were prepared by a two‐stage distillation precipitation polymerization. PMAA@Fe₃O₄/P(NIPAAm‐co‐MAA) core–shell nanoparticles were synthesized by the second‐stage polymerization of NIPAAm, MAA and N, N′‐methylenebisacrylamide as crosslinker in the presence of magnetic nanoparticles and PMAA as core. These novel triple‐functional microcontainers were prepared by selective removal of the PMAA core in water. Daunorubicin hydrochloride (DNR) was loaded into the microcontainers and the release profile was studied by UV–visible spectroscopy. The synthesized nanostructures were characterized with transmission and scanning electron microscopy, X‐ray diffraction and Fourier transform infrared spectroscopy. The magnetic properties were evaluated by vibrating sample magnetometry. The shrink and swelling behavior was studied by dynamic light scattering. Copyright © 2012 Society of Chemical Industry     

Synthesis and thermal properties of phase‐change microcapsules incorporated with nano alumina particles in the shell

Novel phase‐change microcapsules with paraffin as core and melamine‐formaldehyde (MF) resin as shell were synthesized through in situ polymerization, in which nano alumina (nano‐Al₂O₃) particles were dispersed in the shell by mixing nano‐Al₂O₃ with MF prepolymer solution using the direct addition method (i.e., adding nano‐Al₂O₃ into the MF prepolymer solution directly) and the predispersed addition method (i.e., predispersing the nano‐Al₂O₃ homogenously in water under the assistance of dispersant and wetting agents before mixing with the MF prepolymer). Scanning electron microscope experiments demonstrated that the predispersed addition method yielded the microcapsules having the better dispersion and less self‐agglomeration of alumina, compared to the direct addition method. Fourier transform infrared spectroscopy, energy dispersive X‐ray spectroscopy, and electron backscatter diffraction imaging confirmed that the nano‐Al₂O₃ particles were successfully incorporated in the shell by the predispersed addition method. The phase change behavior of microcapsules incorporated with different contents (up to 12.7% relative to the microcapsule) of nano‐Al₂O₃ particles in the shell was investigated by differential scanning calorimeter. The results revealed that the encapsulation efficiency for this kind of novel microcapsules was >77% and the incorporation of nano‐Al₂O₃ in the shell affected the phase change temperature. Thermal gravimetric analysis indicated that the addition of nano‐Al₂O₃ improved the thermal stability of microcapsules remarkably. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Polymer–metal composite particles: Metal particles on poly(St‐co‐MAA) microspheres

Poly(styrene‐co‐methacrylic acid) P(St‐co‐MAA) microspheres with a monodisperse size distribution were prepared by emulsifier‐free emulsion copolymerization of St and MAA. The effects of MAA content on the polymerization rate and the content of MAA in the copolymer were investigated by gravimetrical and IR methods, respectively. The results of XPS measurement indicated the presence of a carboxyl functional group. By chemical metal deposition, nickel or palladium particles were formed and deposited on the surface of P(St‐co‐MAA) microspheres to form P(St‐co‐MAA)Ni or P(St‐co‐MAA)Pd composite particles. XRD measurement and TEM observation confirmed that nickel and palladium metal particles in a small size (20–40 nm) were distributed on surface of the copolymer microspheres. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 75: 1693–1698, 2000     

Release behavior of freeze‐dried alginate beads containing poly(N‐isopropylacrylamide) copolymers

Beads composed of alginate, poly(N‐isopropylacrylamide) (PNIPAM), the copolymers of N‐isopropylacrylamide and methacrylic acid (P(NIPAM‐co‐MAA)), and the copolymers of N‐isopropylacrylamide, methacrylic acid, and octadecyl acrylate (P(NIPAM‐co‐MAA‐co‐ODA)), were prepared by dropping the polymer solutions into CaCl₂ solution. The beads were freeze‐dried and the release of blue dextran entrapped in the beads was observed in distilled water with time and pH. The degree of release was in the order of alginate bead < alginate/PNIPAM bead ≈ alginate/P(NIPAM‐co‐MAA) bead < alginate/P(NIPAM‐co‐MAA‐co‐ODA) bead. On the other hand, swelling ratios reached steady state within 20 min, and the values were 200–800 depending on the bead composition. The degree of swelling showed the same order as that of release. Among the beads, only alginate/P(NIPAM‐co‐MAA‐co‐ODA) bead exhibited pH‐dependent release. At acidic condition, inter‐ and intraelectrostatic repulsion is weak and P(NIPAM‐co‐MAA‐co‐ODA) could readily be assembled into an aggregate due to the prevailing hydrophobic interaction of ODA. Thus, it could block the pore of bead matrix, leading to a suppressed release. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Toughening modification of PS with n‐BA/MMA/styrene core–shell structured copolymer from emulsifier‐free emulsion polymerization

Core–shell structured particles, which comprise the rubbery core and glassy layers, were prepared by emulsifier‐free emulsion polymerization of poly(n‐butyl acrylate/methyl methacrylate)/polystyrene [P(n‐BA/MMA)/PS]. The particle diameter was about 0.22 μm, and the rubbery core was uncrosslinked and lightly crosslinked, respectively. The smaller core–shell structured particle–toughened PS blends were investigated in detail. The dynamic mechanical behavior and observation by scanning electron microscopy of the modified blend system with core–shell structured particles indicated good compatibility between PS and the particles, which is the necessary qualification for an effective toughening modifier. Notched‐impact strength and related mechanical properties were measured for further evaluation of the toughening efficiency. The notched‐impact strength of the toughened PS blends with uncrosslinked particles reached almost sixfold higher than that of the untoughened PS when 15 phr of the core–shell structured particles was added. For the crosslinked particles the toughening effect for PS was not obvious. The toughening mechanism for these smaller particles also is discussed in this article. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 1290–1297, 2003     

Preparation of phase change materials microcapsules by using PMMA network‐silica hybrid shell via sol‐gel process

Encapsulation of phase change materials (PCM) using a poly(methyl methacrylate) network‐silica hybrid as the shell material has been developed. n‐Octadecane melted at 28°C was used as PCM. Based on the suspension polymerization process, the microcapsules were prepared successfully by mixing and by the reaction of ethylene glycol dimethacrylate with precopolymer solution with tetraethoxysilane (TEOS), whose resultant microcapsules had higher latent heat (ΔH = 151 J/g) than those without TEOS (ΔH = 88.3 J/g). The average size of the PCM microcapsules was about 10 μm. The silica content, n‐octadecane content, and latent heat of microcapsules were changed with varying ageing conditions, ageing time, and temperature. The highest amount of latent heat (ΔH = 178.9 J/g) and n‐octadecane content (73.3%) of the microcapsule were obtained when the inorganic/organic ratio of the microcapsule was 5%. It was difficult to increase n‐octadecane content (74% to 55.7–67.9%) and latent heat (180.5 J/g to 135.9–165.7 J/g) of the microcapsules by introducing different functional groups of coupling agents. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Analysis of the swelling dynamics of crosslinked P(N‐iPAAm‐co‐MAA) copolymers,the corresponding homopolymers and their interpenetrating networks. Kinetics of water penetration into the gel above the pKaof MAA comonomeric units

The effect of composition on the swelling kinetics of a series of crosslinked poly(N‐isopropylacrylamide)s [P(N‐iPAAm)] and poly(methacrylic acid)s [P(MAA)], their statistical copolymers P(N‐iPAAm‐co‐MAA), and some sequential interpenetrating networks (IPNs) has been studied at pHs above the pK_a of MAA comonomeric units. The swelling process of the hydrogels upon immersion in buffer solutions was monitored by the weight change as a function of time. First‐order kinetics apply better than second‐order kinetics which fail, especially for predicting swelling equilibrium values. However, hydrogels presenting hydrogen bonding between MAA and N‐iPAAm units do not obey either first‐order or second‐order kinetics. The high n values found indicate that the swelling process is mostly controlled by polymer relaxation. Copyright © 2003 Society of Chemical Industry     

Effect of natural polyphenols on physicochemical properties of crosslinked gelatin‐based polymeric biocomposite

This work was aimed to study the effect of natural polyphenols extract (Acacia nilotica bark) on physicochemical properties of crosslinked gelatin‐poly(acrylamide‐co‐acrylic acid), Gel‐poly(AAm‐co‐Ac), polymeric biocomposite film. Gelatin‐based composite films have extensive application as biocompatible biomaterial as drug carriers, cosmetics, and agricultural food packaging. The prepared composite films were characterized using Fourier transform infrared spectroscopy (FTIR) and differential scanning calorimetry (DSC), in addition to the swelling and degradation behavior. UV‐Vis absorption spectra and scanning electron microscopy (SEM) were also applied to observe the interaction between Gel‐poly(AAm‐co‐Ac) and natural polyphenol (catechin). The study has demonstrated that the involvement of hydrogen bonding and hydrophobic interactions as the major forces involved in the stabilization of gelatin‐based polymeric biocomposite film by the plant polyphenols (catechin and gallic acid derivatives). Thermal stability studies of crosslinked gelatin‐based composite film revealed that A. nilotica bark extract stabilizes the gelatin molecules and leads to moderate increase of the denaturation temperatures relative to the uncrosslinked one. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Influence of microcapsule shell material on the mechanical behavior of epoxy composites for self‐healing applications

In this article, we have studied the effect of microcapsule shell material on the mechanical behavior of self‐healing epoxy composites. Liquid epoxy healant was encapsulated in melamine‐formaldehyde (MF) and urea‐formaldehyde (UF), using emulsion polymerization technique to prepare microcapsules of different shell walls. The core content of the microcapsules, as determined by solvent extraction technique was found to be 65 ± 4%, irrespective of the shell wall of microcapsule. Morphological investigations reveal a rough texture of the spherical microcapsules, which was attributed to the presence of protruding polymer nanoparticles on the surface. Epoxy composites containing UF and MF microcapsules (3–15% w/w) were prepared by room temperature curing and their mechanical behaviour was studied under both quasi‐static and dynamic loadings. The tensile strength, modulus, and impact resistance of the matrix was found to decrease with increasing amount of microcapsule in the formulation, irrespective of the shell wall material used for encapsulation. Interestingly, substantial improvement in the fracture toughness of the base resin was observed. Morphological investigations on the cracked surface revealed features like crack pinning, crack bowing, microcracking and crack path deflection, which were used to explain the toughened nature of microcapsule containing epoxy composites. Our studies clearly indicate that the microcapsule shell wall material does not play any significant role in defining the mechanical properties of the composites. In addition, presence of secondary amine functionalities in UF and MF shell wall do not interfere with the reaction of epoxy with triethylene tetramine hardener during the curing process. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40572.     

Synthesis and characterization of chitosan/urea‐formaldehyde shell microcapsules containing dicyclopentadiene

Microcapsules containing healing agent have been used to develop the self‐healing composites. These microcapsules must possess special properties during the use of composites such as stability in surrounding, appropriate mechanical strength, and lower permeability. A new series of microcapsules containing dicyclopentadiene with chitosan/urea‐formaldehyde copolymer as shell materials were synthesized by in situ copolymerization technology. The microencapsulating mechanism was discussed and the process was explained. Also, the factors influencing the preparation of microcapsules were analyzed. The morphology and shell wall thickness of microcapsules were observed by using scanning electron microscopy. The size of microcapsules was measured using optical microscope and the size distribution was investigated based on data sets of at least 200 measurements. The chemical structure and thermal properties of microcapsules were characterized by Fourier transform infrared spectroscopy and thermogravimetric analysis, respectively. The storage stability and isothermal aging experiment of microcapsules were also investigated. Results indicted that the chitosan/urea‐formaldehyde microcapsules containing dicyclopentadiene were synthesized successfully; the copolymerization occurred between chitosan and urea‐formaldehyde prepolymer. The microcapsule size is in the range of 10–160 μm with an average of 45 μm. The shell thickness of microcapsules is in the range of 1–7 μm and the core content of microcapsules is 67%. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Influence of ethyl methacrylate content on the volume‐phase transition of temperature‐sensitive poly[(N‐isopropylacrylamide)‐co‐(ethyl methacrylate)] microgels

A novel series of temperature‐sensitive poly[(N‐isopropylacrylamide)‐co‐(ethyl methacrylate)] (p(NIPAM‐co‐EMA)) microgels was prepared by the surfactant‐free radical polymerization of N‐isopropylacrylamide (NIPAM) with ethyl methacrylate (EMA). The shape, size dispersity and volume‐phase transition behavior of the microgels were investigated by transmission electron microscopy (TEM), ultraviolet–visible (UV–Vis) spectroscopy, dynamic light scattering (DLS) and differential scanning calorimetry (DSC). The transmission electron micrographs and DLS results showed that microgels with narrow distributions were prepared. It was shown from UV–Vis, DLS and DSC measurements that the volume‐phase transition temperature (VPTT) of the p(NIPAM‐co‐EMA) microgels decreased with increasing incorporation of EMA, but the temperature‐sensitivity was impaired when more EMA was incorporated, causing the volume‐phase transition of the microgels to become more continuous. It is noteworthy that incorporation of moderate amounts of EMA could not only lower the VPTT but also enhance the temperature‐sensitivity of the microgels. The reason for this phenomenon could be attributed to changes in the complicated interactions between the various molecules. Copyright © 2004 Society of Chemical Industry     

Preparation and characterization of acrylonitrile‐ethyl methacrylate copolymers and the effect of LiClO4 salt on electrical properties of copolymer films

Copolymers of poly(acrylonitrile‐co‐ethyl methacrylate), P(AN‐EMA), with three different EMA content and parent homopolymers were synthesized by emulsion polymerization. The chemical composition of copolymers were identified by FTIR, ¹H‐NMR and ¹³C‐NMR spectroscopy. The thermal properties of copolymers were modified by changing the EMA content in copolymer compositions. Various amounts of LiClO₄ salt loaded (PAN‐co‐PEMA) copolymer films were prepared by solution casting. The dielectric properties of these films at different temperatures and frequencies were investigated. It was found that the dielectric constant and ac‐conductivity of copolymer films were strongly influenced by the salt amounts and EMA content in copolymers. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012