High electrical conductivity of nylon 6 composites obtained with hybrid multiwalled carbon nanotube/carbon fiber fillers

The synergetic effect of multiwalled carbon nanotubes (MWNTs) and carbon fibers (CFs) in enhancing the electrical conductivity of nylon 6 (PA6) composites was investigated. To improve the compatibility between the fillers and the PA6 resin, we grafted γ‐aminopropyltriethoxy silane (KH‐550) onto the MWNTs and CFs after carboxyl groups were generated on their surface by chemical oxidation with nitric acid. Fourier transform infrared spectroscopy and thermogravimetric analysis proved that the KH‐550 molecules were successfully grafted onto the surface of the MWNTs and CFs. Scanning electron microscopy and optical microscopy showed that the obtained modified fillers reduced the aggregation of fillers and resulted in better dispersion and interfacial compatibility. We found that the electrical percolation threshold of the MWNT/PA6 and CF/PA6 composites occurred when the volume fraction of the fillers were 4 and 5%, respectively. The MWNT/CF hybrid‐filler system exhibited a remarkable synergetic effect on the electrically conductive networks. The MWNT/7% CF hybrid‐filler system appeared to show a second percolation when the MWNT volume fraction was above 4% and a volume resistivity reduction of two orders of magnitude compared with the MWNT/PA6 system. The mechanical properties of different types of PA6 composites with variation in the filler volume content were also studied. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40923.     

Improvement of electrical conductivity with phase‐separation in polyolefin/multiwall carbon nanotube/polyethylene oxide composites

Electrical conductivity developments of polypropylene (PP)/multiwall carbon nanotube (MWNT) and polybutene (PB)/MWNT composites were carried out with polyethylene oxide (PEO) phase‐separation behavior for the polymeric materials. The low conductivity (8.47 × 10^?8 S cm^?1) of PP(98%)/MWNT (2%) was drastically increased up to 1.56 × 10^?3 S cm^?1 by only 2% PEO(96%)/MWNT(4%) loading. The drastic improvement originated from the formation of an electrical connector structure with the PEO/MWNT domain. The PB(93%)/MWNT(7%) conductivity was also improved by the PEO(92%)/MWNT(8%) loading although the conductivity improvement effect was lower than that of the PP/MWNT. The Raman spectra showed that the MWNT dispersity in the PB was poorer than that in the PP, resulting in the formation of a PEO/MWNT connector structure only at higher loading. In addition, a PEO/carbon black composite was able to produce the connector structure for the PP/MWNT as well as the PEO/MWNT. These results indicated that the highly conductive composites could be produced with smaller MWNT amounts. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Electrical,mechanical, and crystallization properties of ethylene‐tetrafluoroethylene copolymer/multiwalled carbon nanotube composites

Multiwalled carbon nanotubes (MWCNTs) were melt‐mixed in a conical twin‐screw extruder with a random copolymer of ethylene and tetrafluoroethylene. Surprisingly, the electrical percolation threshold of the resultant composites was quite low; ～0.9 wt %. In fact, this value is as low or lower than the value for most MWCNT/semicrystalline polymer composites made with roughly equivalent aspect ratio tubes mixed in a similar manner, for example, melt mixing. This low percolation threshold, suggestive of good dispersion, occurred even though the polymer surface energy is quite low which should make tubes more difficult to disperse. Dynamic mechanical measurements confirmed the rather low percolation threshold. The effect of nanotubes on crystallization kinetics was quite small; suggesting perhaps that a lack of nucleation which in turn reduces/eliminates an insulating crystalline polymer layer around the nanotubes might explain the low percolation threshold. Finally, the modulus increased with the addition of nanotubes and the strain at break decreased. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 41052.     

Structure,mechanical, and electrical properties of high‐density polyethylene/multi‐walled carbon nanotube composites processed by compression molding and blown film extrusion

The structure and properties of melt mixed high‐density polyethylene/multi‐walled carbon nanotube (HDPE/MWCNT) composites processed by compression molding and blown film extrusion were investigated to assess the influence of processing route on properties. The addition of MWCNTs leads to a more elastic response during deformations that result in a more uniform thickness distribution in the blown films. Blown film composites exhibit better mechanical properties due to the enhanced orientation and disentanglement of MWCNTs. At a blow up ratio (BUR) of 3 the breaking strength and elongation in the machine direction of the film with 4 wt % MWCNTs are 239% and 1054% higher than those of compression molded (CM) samples. Resistivity of the composite films increases significantly with increasing BURs due to the destruction of conductive pathways. These pathways can be recovered partially using an appropriate annealing process. At 8 wt % MWCNTs, there is a sufficient density of nanotubes to maintain a robust network even at high BURs. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42665.     

Electrical conductivity and tensile properties of block‐copolymer‐wrapped single‐walled carbon nanotube/poly(methyl methacrylate) composites

Poly(methyl methacrylate) (PMMA) composites containing raw or purified single‐walled carbon nanotubes (SWCNTs) are prepared by in situ polymerization and solution processing. The SWCNTs are purified by centrifugation in a Pluronic surfactant, which consists of polyethyleneoxide and polypropyleneoxide blocks. Both the effects of SWCNT purity and non‐covalent functionalization with Pluronic are evaluated. Electrical conductivity of PMMA increases by 7 orders of magnitude upon the integration of raw or purified SWCNTs. The best electrical properties are measured for composites made of purified SWCNTs and prepared by in situ polymerization. Strains at fracture of the SWCNT/PMMA composites are nearly identical to those of the neat matrix. A certain decrease in the work to fracture is measured, particularly for composites containing purified SWCNTs (?31.6%). Fractography and Raman maps indicate that SWCNT dispersion in the PMMA matrix improves upon the direct addition of Pluronic, while dispersion becomes more difficult in the case of purified SWCNTs. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41547.     

Thermosetting polyurethane‐multiwalled carbon nanotube composites: Thermomechanical properties and nanoindentation

In this study, composites based on a thermoset polyurethane elastomer (PU) and multiwalled carbon nanotubes (MWCNT) in the case of a PU of high elastic modulus (>200 MPa) are analyzed for the first time. As‐grown and modified nanotubes with 4 wt % of oxygenated functions (MWCNT‐ox) were employed to compare their effect on composite properties and maxima mechanical properties (elastic modulus and tensile strength) were reached at 0.5 wt % of MWCNT‐ox. Furthermore, by examining the morphology using optical and electron microscopies better dispersion and interaction of the nanotube‐matrix was observed for this material. DMTA data supports the observation of an increase in the glass transition temperature of ～20°C in the nanocomposites compared with the thermoset PU, which is an important result because it shows extended reliability in extreme environments. Finally, nanoindentation tests allowed a comparison with the conventional mechanical tests by measuring the elastic modulus and hardness at the subsurface of PU and the nanocomposites. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 41207.     

A liquid‐like multiwalled carbon nanotube derivative and its epoxy nanocomposites

Multiwall carbon nanotubes (MWCNTs) with liquid‐like behavior at room temperature were prepared with sulfonic acid terminated organosilanes as corona and tertiary amine as canopy. The liquid‐like MWCNT derivative had low viscosity at room temperature (3.89 Pa s at 20°C) and exhibited non‐Newtonian shear‐thinning behavior. The weight fraction of MWCNT in the derivative was 16.72%. The MWCNT derivative showed very good dispersion in organic solvents, such as ethanol and acetone. The liquid‐like MWCNT derivative was incorporated into epoxy matrix to investigate the mechanical performance of the nanocomposites and the distribution of MWCNTs in the matrix. When the liquid‐like MWCNT derivative content was up to 1 wt %, the flexural strength and impact toughness of composites were 12.1 and 124% higher than the pure epoxy matrix, respectively. Transmission electron microscope (TEM) confirmed the very good dispersion of the liquid‐like MWCNT derivative in epoxy matrix. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 130: 2217–2224, 2013     

Simultaneous enhancements in the mechanical,thermal, and electrical performances of glass‐fiber‐reinforced cyanate ester/epoxy composites with plasma‐functionalized carbon nanotubes at different temperatures

Woven glass‐fiber‐reinforced cyanate ester/epoxy composites modified with plasma‐functionalized multiwalled carbon nanotubes (MWCNTs) were prepared. The mechanical, thermal, and electrical properties of the composites were investigated at different temperatures. The results show that the interlaminar shear strength, thermal conductivity, and electrical conductivity of the composites at room temperature and the cryogenic temperatures were enhanced simultaneously by the incorporation of MWCNTs, whereas the nonconductive behavior of the composites as electrical insulating materials was not changed. Meanwhile, the reinforcing mechanism was also examined on the basis of the microstructure of the composites. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41418.     

Recent advances in bio‐sourced polymeric carbohydrate/nanotube composites

Nanotubes (NTs), especially carbon nanotubes (CNTs), have attracted much attention in recent years because of their large specific surface area, and their outstanding mechanical, thermal, and electrical properties. In this review we emphasize the development of fascinating properties of polymeric carbohydrate/CNT composites, particularly in terms of their mechanical and conductivity properties and potential applications. Many methods used to modify CNTs during preparation of polymeric carbohydrate/CNT composites are presented. Moreover, we also discuss the enhanced mechanical and electrical effectiveness when hybrid CNTs or halloysite nanotubes were incorporated into different carbohydrate polymer matrices. Finally, we give a future outlook for the development of polymeric carbohydrate/CNT composites as potential alternative materials for various applications including sensors, electroactive paper, electrodes, sorbents for environmental remediation, packaging film, specialty textile, and biomedical devices. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40359.     

Effect of polymer chain scission on photodegradation behavior of polystyrene/multi‐wall carbon nanotube composite

To clarify an effect of polymer chain scission on a polystyrene (PS)/multi‐wall carbon nanotube (MWNT) composite photodegradation, a relationship between the change of molecular weight and photodegradation behavior was studied. The MWNT loading brought about severe PS chain scission and led to the increase of the low molecular weight (less than 10⁵) fraction. The increase of the fraction was not proportional to the loading amount and showed the minimum at the 2% loading. The strange behavior was due to a rheological effect bringing about a decrease of shear stress in the composite preparation. An unsaturated end group was produced by the chain scission and became the photodegradation initiator leading to auto‐oxidation and crosslink reactions. The MWNT scavenged radical species and worked as an antioxidant. The coexistence of the unsaturated end group and MWNT made the photodegradation behavior complicated. However, the MWNT radical scavenging ability was considerably poor, and the MWNT had little ability to inhibit the photodegradation initiation. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40362.     

Preparation and properties of carbon nanotube/binary‐polymer composites with a double‐segregated structure

A carbon nanotube (CNT)/poly(methyl methacrylate) (PMMA)/ultrahigh molecular weight polyethylene (UHMWPE) composite containing a double‐segregated structure was formalized by means of a facile mechanical mixing technology. In the composite, the CNTs were decorated on the surfaces of PMMA granules, and the CNTs decorated granules formed the continuous segregated conducting layers at the interfaces between UHMWPE particles. Morphology observations confirmed the formation of a specific double‐segregated CNT conductive network, resulting in an ultralow percolation threshold of ～0.2 wt %. The double‐segregated composite containing only 0.8 wt % CNT loading exhibited a high electrical conductivity of ～0.2 S m^?1 and efficient electromagnetic shielding effectiveness of ～19.6 dB, respectively. The thermal conductivity, temperature‐resistivity behaviors, and mechanical properties of the double‐segregated composites were also studied. This work provided a novel conductive network structure to attain a high‐performance conducting polymer composite at low filler loadings. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39789.     

Effect of styrene–acrylonitrile on the electrical resistivity of polycarbonate/multiwalled carbon nanotube composites

Multiwalled carbon nanotube (MWCNT)‐filled polycarbonate (PC)/styrene–acrylonitrile (SAN) blends with a wide range of blend compositions were prepared by melt mixing in a rotational rheometer, and the effect of SAN on the electrical properties of the PC/MWCNT composites was studied. The structure/electrical property relationship was investigated and explained by a combination of MWCNT localization and blend morphology. Transmission electron micrographs showed selective localization of MWCNTs in the PC phase, regardless of the blend morphology. When the SAN concentration was 10–40 wt %, which corresponded to sea‐island (10–30 wt %) and cocontinuous (40 wt %) blend morphologies (PC was continuous in both structures), the electrical resistivity decreased with increases in the SAN content. The concept of an effective volume concentration of MWCNTs was used to explain this effect. When the SAN concentration was 70 wt % or higher, the electrical resistivity was very high because MWCNTs were confined in the isolated PC particles. In addition, SAN was replaced by other polymers [polystyrene, methyl methacrylate/styrene, and poly(methyl methacrylate)]; these yielded similar blend morphologies and MWCNT localization and showed the generality of the concept of effective concentration in explaining a decrease in the electrical resistivity upon the addition of a second polymer. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011.     

Mass production of carbon nanotube‐reinforced polyacrylonitrile fine composite fibers

A facile and large‐scale production method of polyacrylonitrile (PAN) fibers and carboxyl functionalized carbon nanotube reinforced PAN composite fibers was demonstrated by the use of Forcespinning® technology. The developed polymeric fibers and carbon nanotube‐reinforced composite fibers were subsequently carbonized to obtain carbon fiber systems. Analysis of the fiber diameter, homogeneity, alignment of carbon nanotube and bead formation was conducted with scanning electron microscopy. Thermogravimetric analysis, electrical, and mechanical characterization were also conducted. Raman and FTIR analyses of the developed fiber systems indicate interactions between carbon nanotubes and the carbonized PAN fibers through π–π stacking. The carbonized carbon nanotube‐reinforced PAN composite fibers possess promising applications in energy storage applications. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40302.     

Effect of the nanotube aspect ratio and surface functionalization on the morphology and properties of multiwalled carbon nanotube polyamide‐based fibers

In this study, the effect of the carbon nanotube (CNT) aspect ratio and surface functionalization on the mechanical behavior and morphological changes of polyamide (PA)‐based fibers was investigated. Composites were prepared by the melt blending of CNTs with PA, and at a later time, the fibers were prepared by melt spinning and cold drawing. A reinforcement effect was noticed for all of the CNTs samples, and the increase in the mechanical properties and dimensional stability was more pronounced for highly oriented filaments. When the elongational flow was increased, the orientation of CNTs along the fiber direction was observed, but the nanotube alignment was much more difficult for CNTs with ultrathin outer diameters because of nanotube waviness and folding. Moreover, the presence of functional groups on the CNT surface hindered their orientation along the fiber direction because some interaction between the functional groups could occur. The morphological variations of the oriented, anisotropic fibers, as studied with transmission electron microscopy, scanning electron microscopy, small‐angle X‐ray scattering, and differential scanning calorimetry analysis, were correlated with changes in the mechanical behavior. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Enhanced mechanical and electrical properties of nylon‐6 composite by using carbon fiber/graphene multiscale structure as additive

In order to improve the mechanical properties and electrical conductivity of nylon‐6 (PA6) composites, a highly effective multiscale structure filler comprising poly(diallyldimethylammonium chloride) (PDDA)‐modified graphene and negatively surface‐charged carbon fiber was synthesized in this study. For this, the graphene used a top‐down method for synthesis by exfoliating graphite oxide (GO) through focused solar radiation on it and then modified its surface by using a polyelectrolyte. The carbon fiber (CF) surface was functionalized by an acid oxidation method. The multiscale structure was manufactured via the electrostatic interaction between the positively charged solar graphene (SG) and oppositely charged CF by homogeneous mixing. Scanning electron microscopy (SEM) images of the fracture surface of the PA6 composites exhibited that the carbon fiber/graphene multiscale structure possessed better dispersion and compatibility than those of individual CF and SG did. Thus, the impact strength, bending properties, and electrical conductivity of the PA6 composites were enhanced. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41968.     

Tailored dielectric and mechanical properties of noncovalently functionalized carbon nanotube/poly(styrene‐b‐(ethylene‐co‐butylene)‐b‐styrene) nanocomposites

The preparation of high‐dielectric poly(styrene‐b‐(ethylene‐co‐butylene)‐b‐styrene) (SEBS) composites containing functionalized single‐walled carbon nanotubes (f‐SWCNTs) noncovalently appended with dibutyltindilaurate are reported herein. Transmission electron microscopy and X‐ray photoelectron and Raman spectroscopy confirmed the noncovalent functionalization of the SWCNTs. The SEBS‐f‐SWCNT composites exhibited enhanced mechanical properties as well as a stable and high dielectric constant of approximately 1000 at 1 Hz with rather low dielectric loss at 2 wt% filler content. The significantly enhanced dielectric property originates from the noncovalent functionalization of the SWCNTs that ensures good dispersion of the f‐SWCNTs in the polymer matrix. The f‐SWCNTs also acted as a reinforcing filler, thereby enhancing the mechanical properties of the composites. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Thermoplastic polyvinyl alcohol/multiwalled carbon nanotube composites: Preparation,mechanical properties,thermal properties,and electromagnetic shielding effectiveness

This study uses the solution mixing method to combine plasticized polyvinyl alcohol (PVA) as a matrix, and multiwalled carbon nanotubes (MWCNTs) as reinforcement to form PVA/MWCNTs films. The films are then laminated and hot pressed to create PVA/MWCNTs composites. The control group of PVA/MWCNTs composites is made by incorporating the melt compounding method. Diverse properties of PVA/MWCNTs composites are then evaluated. For the experimental group, the incorporation of MWCNTs improves the glass transition temperature (T_g), crystallization temperature, T_c), and thermal stability of the composites. In addition, the test results indicate that composites containing 1.5 wt % of MWCNTs have the maximum tensile strength of 51.1 MPa, whereas composites containing 2 wt % MWCNTs have the optimal electrical conductivity of 2.4 S/cm, and electromagnetic shielding effectiveness (EMI SE) of ?31.41 dB. This study proves that the solution mixing method outperforms the melt compounding method in terms of mechanical properties, dispersion, melting and crystallization behaviors, thermal stability, and EMI SE. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43474.     

Preparation and characterization of extruded nanocomposite based on polycarbonate/butadiene‐acrylonitrile‐styrene blend filled with multiwalled carbon nanotubes

Nanocomposites of polycarbonate/acrylonitrile‐butadiene‐styrene (PC/ABS) with multiwall carbon nanotubes (MWCNT) prepared by masterbatch dilution are investigated in this work. Melt compounding with twin screw extruder is followed by complete characterization of morphology, rheological‐, mechanical‐, and thermal‐properties of the nanocomposites. Light‐transmission‐ and scanning electron microscopy shows the preferential location of MWCNT in the PC. Nevertheless, relatively good dispersion in the whole matrix is achieved, what is corroborated with the specific mechanical energy. The study of viscoelastic properties of PC/ABS‐MWCNT shows the fluid–solid transition below 0.5 wt % MWCNT. Beyond this point the continuous nanofiller network is formed in the matrix promoting the reinforcement. Addition of 0.5 wt % MWCNT reduces ductility of PC/ABS and enhances Young's modulus by about 30% and yield stress by about 20%. Moreover, theoretical values of stiffness calculated within this work agree with the experimental data. Electrical conductivity, showing percolation at 2.0 wt % MWCNT, are influenced by processing temperature. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40271.     

Effect of processing parameters on the surface resistivity of ethylene propylene diene terpolymer/multiwalled carbon nanotube nanocomposites

In this study, ethylene propylene diene terpolymer (EPDM) is melt‐mixed with multiwalled carbon nanotube (MWCNT). To realize full‐scale application of MWCNT to the rubber industries, the effect of melt‐processing parameters on the surface resistivity in the rubber/MWCNT nanocomposites should be well understood. The effect of rotor speed, mixing temperature, and annealing time on the surface resistivity of the EPDM/MWCNT nanocomposites has been investigated. The surface resistivity of EPDM/MWCNT nanocomposites with 3 phr MWCNT increases with increasing the rotor speed and decreasing the mixing temperature. Tensile strength and tensile modulus of EPDM/MWCNT (3 phr) nanocomposites are higher than those of EPDM, respectively. For the nanocomposite with 3 phr MWCNT loadings, surface resistivity increases as the annealing time at room temperature increases. This is the first report that surface resistivity of rubber/MWCNT nanocomposites increases significantly on annealing at room temperature. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40129.     

Effects of fiber surface grafting by functionalized carbon nanotubes on the interfacial durability during cryogenic testing and conditioning of CFRP composites

Carbon fiber reinforced epoxy (CE) composite is ideal for a cryogenic fuel storage tank in space applications due to its unmatched specific strength and modulus. In this article, inter-laminar shear strength (ILSS) of carbon fiber/epoxy (CE) composite is shown to be considerably improved by engineering the interface with carboxyl functionalized multi-walled carbon nanotube (FCNT) using electrophoretic deposition technique. FCNT deposited fibers from different bath concentrations (0.3, 0.5, and 1.0 g/L) were used to fabricate the laminates, which were then tested at room (30°C) and in-situ liquid nitrogen (LN) (−196°C) temperature as well as conditioning for different time durations (0.25, 0.5, 1, 6, and 12 h) followed by immediate RT testing to study the applicability of these engineered materials at the cryogenic environment. A maximum increment in ILSS was noticed at bath concentration of 0.5 g/L, which was ~21% and ~ 17% higher than neat composite at 30°C and − 196°C, respectively. Short-term LN conditioning was found to be detrimental due to developed cryogenic shock, which was further found to be compensated by cryogenic interfacial clamping upon long-term exposure.