Synthesis and self‐assembly of amphiphilic star‐block copolymers consisting of polyethylene and poly(ethylene glycol) segments

We report on the synthesis and self‐assembly in water of well‐defined amphiphilic star‐block copolymers with a linear crystalline polyethylene (PE) segment and two or three poly(ethylene glycol) (PEG) segments as the building blocks. Initially, alkynyl‐terminated PE (PE‐?) is synthesized via esterification of pentynoic acid with hydroxyl‐terminated PE, which is prepared using chain shuttling ethylene polymerization with 2,6‐bis[1‐(2,6‐dimethylphenyl) imino ethyl] pyridine iron (II) dichloride/methylaluminoxane/diethyl zinc and subsequent in situ oxidation with oxygen. Then diazido‐ and triazido‐terminated PE (PE‐(N₃)₂ and PE‐(N₃)₃) are obtained by the click reactions between PE‐? and coupling agents containing triazido or tetraazido, respectively. Finally, the three‐arm and four‐arm star‐block copolymers, PE‐b‐(PEG)₂ and PE‐b‐(PEG)₃, are prepared by click reactions between PE‐(N₃)₂ or PE‐(N₃)₃ and alkynyl‐terminated PEG. The self‐assembly of the resultant amphiphilic star‐block copolymers in water was investigated by dynamic light scattering, transmission electron microscopy, and atomic force microscopy. It is found that, in water, a solvent selectively good for PEG blocks; these star‐block copolymer chains could self‐assemble to form platelet‐like micelles with insoluble PE blocks as crystalline core and soluble PEG blocks as shell. The confined crystallization of PE blocks in self‐assembled structure formed in aqueous solution is investigated by differential scanning calorimetry. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Influences of the chain structure of PE‐b‐PEG on the properties of PE/PE‐b‐PEG blend membranes prepared by TIPS

In this article, a series of diblock copolymer polyethylene‐b‐ poly(ethylene glycol)s (PE‐b‐PEGs) with various molecular weight of polyethylene segment was blended with linear low‐density PE. The PE/PE‐b‐PEG blend porous membranes with high porosity were obtained by thermally induced phase separation (TIPS) process. The isothermal crystallization kinetics of PE/LP/PE‐b‐PEG blends indicated that the introduction of PE‐b‐PEG could inhibit the growth rate of polyethylene crystals which could increase the pore size and porosity of the membranes. The PE/PE‐b‐PEG blend membranes with PE₁₃₀₀‐b‐PEG₂₂₀₀ showed the largest pore size and porosity due to its crystallization behavior during TIPS. The surface of the membranes became smoother and the morphology of the membranes could be effectively tuned by introducing PE‐b‐PEG. Compared with the PE membrane, the PE/PE‐b‐PEG blend membranes exhibited higher hydrophilicity (the water contact angle decreased from 112° to 84°), water permeability (the permeation flux increased from 80 to 440 L/m² h under 0.1 MPa), rejection performance (completely reject carbon particles in the filtration of carbon ink solution), and fouling resistance (the value of protein adsorption dropped from 0.25 to 0.05 mg/cm²). The hydrophilicity and fouling resistance of PE/PE‐b‐PEG blend membranes increased as the length of PE segment in PE‐b‐PEGs decreased. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46499.     

New optically active poly(amide–imide–urethane) thermoplastic elastomers derived from poly(ethylene glycol diols), 4,4′‐methylene‐bis(4‐phenylisocyanate), and a diacid based on an amino acid by a two‐step method under microwave irradiation

A new class of optically active poly(amide–imide–urethane)s (PAIUs) was synthesized via a two‐step diisocyanate route under microwave irradiation. In these reactions, 4,4′‐methylene‐bis(4‐phenylisocyanate) was reacted with bis(p‐amido benzoic acid)‐N‐trimellitylimido‐L ‐leucine and poly(ethylene glycol diol)s (PEGs), such as PEG‐400, PEG‐600, PEG‐1000, and PEG‐2000, to furnish a series of new PAIUs. The effects of different reaction conditions, such as the method of preparation (polyol or acid chain extension), the prepolymerization step (NCO‐terminated oligoamide or NCO‐terminated polyether polyol), the irradiation time and power, the reaction solvent, the soft‐segment length, and the presence or absence of reaction catalysts (e.g., triethylamine, pyridine, and dibutyltin dilaurate), on the properties of the copolymers, including the solubility, viscosity, and thermal behavior, were investigated. The resulting multiblock copolymers had inherent viscosities of 0.15–0.53 dL/g. These multiblock copolymers were optically active, thermally stable, and soluble in amide‐type solvents. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 1781–1792, 2005     

Polyethylene‐block‐poly(ε‐caprolactone) diblock copolymers: synthesis and compatibility

A strategy is introduced for the synthesis of polyethylene‐block‐poly(ε‐caprolactone) block copolymers by a combination of coordination polymerization and ring‐opening polymerization. First, end‐hydroxylated polyethylene (PE‐OH) was prepared with a one‐step process through ethylene/3‐buten‐1‐ol copolymerization catalyzed by a vanadium(III) complex bearing a bidentate [N,O] ligand ([PhN?C(CH₃)CHC(Ph)O]VCl₂(THF)₂). The PE‐OH was then used as macroinitiator for ring‐opening polymerization of ε‐caprolactone, leading to the desired nonpolar/polar diblock copolymers. The block structure was confirmed by spectral analysis using ¹H NMR, gel permeation chromatography and differential scanning calorimetry. The unusual topologies of the model copolymers will establish a fundamental understanding for structure–property correlations, e.g. compatibilization, of polymer blends and surface and interface modification of other polymers. © 2014 Society of Chemical Industry     

Synthesis of double‐hydrophilic poly(methylacrylic acid)–poly(ethylene glycol)–poly(methylacrylic acid) triblock copolymers and their micelle formation

The aim of the work reported was to synthesize a series of double‐hydrophilic poly(methacrylic acid)‐block‐poly(ethylene glycol)‐block‐poly(methacrylic acid) (PMAA‐b‐PEG‐b‐PMAA) triblock copolymers and to study their self‐assembly behavior. These copolymeric self‐assembly systems are expected to be potential candidates for applications as carriers of hydrophilic drugs. Bromo‐terminated difunctional PEG macroinitiators were used to synthesize well‐defined triblock copolymers of poly(tert‐butyl methacrylate)‐block‐poly(ethylene glycol)‐block‐poly(tert‐butyl methacrylate) via reversible‐deactivation radical polymerization. After the removal of the tert‐butyl group by hydrolysis, double‐hydrophilic PMAA‐b‐PEG‐b‐PMAA triblock copolymers were obtained. pH‐sensitive spherical micelles with a core–corona structure were fabricated by self‐assembly of the double‐hydrophilic PMAA‐b‐PEG‐b‐PMAA triblock copolymers at lower solution pH. Transmission electron microscopy and laser light scattering studies showed the micelles were of nanometric scale with narrow size distribution. Solution pH and micelle concentration strongly influenced the hydrodynamic radius of the spherical micelles (48–310 nm). A possible reason for the formation of the micelles is proposed. Copyright © 2010 Society of Chemical Industry     

Preparation and characterization of amphiphilic block copolymer of polyacrylonitrile‐block‐poly(ethylene oxide)

The synthesis of polyacrylonitrile‐block‐poly(ethylene oxide) (PAN‐b‐PEO) diblock copolymers is conducted by sequential initiation and Ce(IV) redox polymerization using amino‐alcohol as the parent compound. In the first step, amino‐alcohol potassium with a protected amine group initiates the polymerization of ethylene oxide (EO) to yield poly(ethylene oxide) (PEO) with an amine end group (PEO‐NH₂), which is used to synthesize a PAN‐b‐PEO diblock copolymer with Ce(IV) that takes place in the redox initiation system. A PAN‐poly(ethylene glycol)‐PAN (PAN‐PEG‐PAN) triblock copolymer is prepared by the same redox system consisting of ceric ions and PEG in an aqueous medium. The structure of the copolymer is characterized in detail by GPC, IR, ¹H‐NMR, DSC, and X‐ray diffraction. The propagation of the PAN chain is dependent on the molecular weight and concentration of the PEO prepolymer. The crystallization of the PAN and PEO block is discussed. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 1753–1759, 2003     

Improving the antifouling properties of polypropylene surfaces by melt blending with polyethylene glycol diblock copolymers

Protein‐resistant polyethylene‐block‐poly(ethylene glycol) (PE‐b‐PEG) copolymers of different molecular weights at various concentrations were compounded by melt blending with polypropylene (PP) polymers in order to enhance their antifouling properties. Phase separation of the PE‐b‐PEG copolymer and its migration to the surface of the PP blend, was confirmed by attenuated total reflectance–Fourier transform infrared, X‐ray photoelectron spectroscopy, and static water contact angle measurements. Enrichment of PEG chains at the surface of the blends increased with increasing PE‐b‐PEG copolymer concentration and molecular weight. The PP blends compounded with PE‐b‐PEG copolymer having the lowest molecular weight (875 g mol^?1), at the lowest concentration (1 wt %), gave the lowest bovine serum protein adsorption (30% less) compared to that of neat PP. At higher concentrations (5 and 10 wt %), and higher molecular weights (920, 1400, and 2250 g mol^?1), the PE‐b‐PEG copolymers leached‐out resulting in protein adsorption comparable to that of neat PP. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46122.     

Synthesis and aggregation behavior of four types of different shaped PCL‐PEG block copolymers

Biodegradable, amphiphilic, linear (diblock and triblock) and star‐shaped (three‐armed and four‐armed) poly[(ethylene glycol)‐block‐(ε‐caprolactone)] copolymers (PEG–PCL copolymers) were synthesized by ring‐opening polymerization of ε‐caprolactone (CL) with stannous octoate as a catalyst, in the presence of monomethoxypoly(ethylene glycol) (MPEG), poly(ethylene glycol) (PEG), three‐armed poly(ethylene glycol) (3‐arm PEG) or four‐armed poly(ethylene glycol) (4‐arm PEG) as an initiator, respectively. The monomer‐to‐initiator ratio was varied to obtain copolymers with various PEG weight fractions in a range 66–86%. The molecular structure and crystallinity of the copolymers, and their aggregation behavior in the aqueous phase, were investigated by employing ¹H‐NMR spectroscopy, gel permeation chromatography and differential scanning calorimetry, as well as utilizing the observational data of gel–sol transitions and aggregates in aqueous solutions. The aggregates of the PEG–PCL block copolymers were prepared by directly dissolving them in water or by employing precipitation/solvent evaporation technique. The enthalpy of fusion (ΔH_m), enthalpy of crystallization (ΔH_crys) and degrees of crystallinity (χ_c) of PEG blocks in copolymers and the copolymer aggregates in aqueous solutions were influenced by their PEG weight fractions and molecular architecture. The gel–sol transition properties of the PEG–PCL block copolymers were related to their concentrations, composition and molecular architecture. Copyright © 2006 Society of Chemical Industry     

Excellent biocompatible polymeric membranes prepared via layer‐by‐layer self‐assembly

Excellent biocompatible polymeric membranes were prepared by combining the antifouling property of poly(ethylene glycol) methyl ether (mPEG) and the anticoagulant property of poly(sodium p‐styrene sulfonate) (PSS). Block copolymers of poly(ethylene glycol) methyl ether‐b‐poly(sodium p‐styrene sulfonate) (mPEG‐b‐PSS) with different chain lengths were synthesized by ATRP using mPEG macroinitiator. The copolymers were then used to modify polyethersulfone (PES) membrane via layer‐by‐layer (LBL) self‐assembly technology. The chemical compositions, surface morphologies and hydrophilicity of the modified membranes were characterized, indicating that the mPEG‐b‐PSS copolymers were successfully deposited on the membranes surfaces. Then, the blood compatibility and cytocompatibility of the modified membranes were systematically investigated. The results indicated that the mPEG‐b‐PSS copolymers could improve the hydrophilicity and the resistance to protein adsorption, and had great effect on suppressing platelet adhesion, prolonging clotting times, and improving cytocompatibility. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41245.     

Synthesis and characterization of poly(ϵ‐caprolactone)‐b‐poly(ethylene glycol) block copolymers prepared by a salicylaldimine‐aluminum complex

A series of poly(?‐caprolactone)‐b‐poly(ethylene glycol) (PCL‐b‐PEG) block copolymers with different molecular weights were synthesized with a salicylaldimine‐aluminum complex in the presence of monomethoxy poly(ethylene glycol). The block copolymers were characterized by ¹H NMR, GPC, WAXD, and DSC. The ¹H NMR and GPC results verify the block structure and narrow molecular weight distribution of the block copolymers. WAXD and DSC results show that crystallization behavior of the block copolymers varies with the composition. When the PCL block is extremely short, only the PEG block is crystallizable. With further increase in the length of the PCL block, both blocks can crystallize. The PCL crystallizes prior to the PEG block and has a stronger suppression effect on crystallization of the PEG block, while the PEG block only exerts a relatively weak adverse effect on crystallization of the PCL block. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Polycarbonate microspheres containing tumor necrosis factor‐α genes and magnetic powder as potential cancer therapeutics

Amphiphilic polycarbonate copolymers including methoxy‐terminated poly(ethylene glycol)‐co‐poly (5,5‐dimethyl trimethylene carbonate) [Poly(PEG‐b‐TMC)] and poly(ethylene glycol)‐co‐poly(trimethylene carbonate) [Poly(PEG‐b‐DTC)] were synthesized. The water‐in‐oil‐in‐water (W/O/W) solvent evaporation technique was adopted to produce anticancer magnetic Poly(PEG‐b‐DTC) microspheres containing tumor necrosis factor‐α (TNF‐α) genes and Fe₃O₄ magnetic ultrafine powder. Drug release studies showed that the microspheres can sustain a steady release rate of TNF‐α genes in 0.1M phosphate buffer saline solution in vitro for up to 60 h. In vitro cytotoxicity assays demonstrated that the microspheres have high inhibition and antitumor action to human hepatocellular carcinoma (Bel‐7204) cells in vitro. In vivo inhibition on the growth of hepatic carcinomas and histopathologic observation indicated that the microspheres possess a markedly high antitumor activity to human hepatocellular carcinoma (Bel‐7204). © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Preparation of diblock copolymers consisting of methoxy poly(ethylene glycol) and poly(ε‐caprolactone)/poly(L‐lactide) and their degradation property

Methoxy poly(ethylene glycol)‐b‐poly(ε‐caprolactone) (MPEG‐PCL) or MPEG‐b‐poly(L ‐lactide) (MPEG‐PLLA) diblock copolymers were prepared by the polymerization of CL or LA, using MPEG as an initiator in the presence of stannous octoate. MPEG‐b‐poly(ε‐caprolactone‐ran‐L ‐lactide) (MPEG‐PCLA) diblock copolymers with different chemical composition of PCL and PLLA were also prepared by adjusting the amount of CL and LA from MPEG in the presence of stannous octoate. In degradation study, the degradation of the MPEG‐PCLA diblock copolymers mainly depends on the PCL and PLLA segments present in their structure. MPEG‐PCLA, with intermediate ratio of PCL and PLLA segment, completely degraded after 14 weeks. Meanwhile, partially degraded MPEG‐PCLA segments and parent MPEG segments were observed at higher PCL or PLLA segment contents. Introduction of PLLA into the PCL segments caused a lowering of the crystallinity of the diblock copolymers, thus, inducing a faster incoming of water into the copolymers. We confirmed that the diblock copolymers, with lower degree of crystallinity, have degraded more rapidly. POLYM. ENG. SCI., 46: 1242–1249, 2006. © 2006 Society of Plastics Engineers     

Adjustable temperature sensor with double thermoresponsiveness based on the aggregation property of binary diblock copolymers

This article presents a new and promising way to design a temperature sensor, which is based on the micellization or aggregation behavior of binary diblock copolymers of poly(ethylene glycol)‐b‐poly(N‐isopropylacrylamide) (PEG‐b‐PNIPAM) and poly(ethylene glycol)‐b‐poly(4‐vinylpyridine) (PEG‐b‐P(4‐VP)). The temperature sensor presents both a lower critical response temperature (LCRT) and an upper critical response temperature (UCRT), where the thermoreversible aggregating of PEG‐b‐P(4‐VP) and H₂SO₄ is used to control the LCRT, and the thermoreversible micellization of PEG‐b‐PNIPAM is used to control the UCRT. Furthermore, the LCRT can be altered by changing the H₂SO₄ concentration, and the UCRT can be adjusted by altering the PEG‐b‐PNIPAM concentration. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 3144–3148, 2006     

Synthesis and characterization of poly(ε‐caprolactone)‐b‐poly(ethylene glycol)‐b‐poly(ε‐caprolactone) triblock copolymers with dibutylmagnesium as catalyst

Two series of poly(ε‐caprolactone)‐b‐poly(ethylene glycol)‐b‐poly(ε‐caprolactone) triblock copolymers were prepared by the ring opening polymerization of ε‐caprolactone in the presence of poly(ethylene glycol) and dibutylmagnesium in 1,4‐dioxane solution at 70°C. The triblock structure and molecular weight of the copolymers were analyzed and confirmed by ¹H NMR, ¹³C NMR, FTIR, and gel permeation chromatography. The crystallization and thermal properties of the copolymers were investigated by wide‐angle X‐ray diffraction (WAXD) and differential scanning calorimetry (DSC). The results illustrated that the crystallization and melting behaviors of the copolymers were depended on the copolymer composition and the relative length of each block in copolymers. Crystallization exothermal peaks (T_c) and melting endothermic peaks (T_m) of PEG block were significantly influenced by the relative length of PCL blocks, due to the hindrance of the lateral PCL blocks. With increasing of the length of PCL blocks, the diffraction and the melting peak of PEG block disappeared gradually in the WAXD patterns and DSC curves, respectively. In contrast, the crystallization of PCL blocks was not suppressed by the middle PEG block. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Influence of the synthesis conditions on the structural and thermal properties of poly(l‐lactide)‐b‐poly(ethylene glycol)‐b‐poly(l‐lactide)

The poly(l ‐lactide)‐b‐poly(ethylene glycol)‐b‐poly(l ‐lactide) block copolymers (PLLA‐b‐PEG‐b‐PLLA) were synthesized in a toluene solution by the ring‐opening polymerization of 3,6‐dimethyl‐1,4‐dioxan‐2,5‐dione (LLA) with PEG as a macroinitiator or by transterification from the homopolymers [polylactide and PEG]. Two polymerization conditions were adopted: method A, which used an equimolar catalyst/initiator molar ratio (1–5 wt %), and method B, which used a catalyst content commonly reported in the literature (<0.05 wt %). Method A was more efficient in producing copolymers with a higher yield and monomer conversion, whereas method B resulted in a mixture of the copolymer and homopolymers. The copolymers achieved high molar masses and even presenting similar global compositions, the molar mass distribution and thermal properties depends on the polymerization method. For instance, the suppression of the PEG block crystallization was more noticeable for copolymer A. An experimental design was used to qualify the influence of the catalyst and homopolymer amounts on the transreactions. The catalyst concentration was shown to be the most important factor. Therefore, the effectiveness of method A to produce copolymers was partly due to the transreactions. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40419.     

Effect of molecular weight on spherulitic growth rate of poly(ϵ‐caprolactone) and poly(ϵ‐caprolactone)‐b‐poly(ethylene glycol)

The spherulitic growth rates of a series poly (?‐caprolactone) homopolymers and poly(?‐caprolactone)‐b‐ poly(ethylene glycol) (PCL‐b‐PEG) block copolymers with different molecular weights but narrow polydispersity were studied. The results show that for both PCL homopolymers and PCL‐b‐PEG block copolymers, the spherulitic growth rate first increases with molecular weight and reaches a maximum, then decreases as molecular weight increases. Crystallization temperature has greater influence on the spherulitic growth rate of polymers with higher molecular weight. Hoffman–Lauritzen theory was used to analyze spherulitic growth kinetics and the free energy of the folding surface (σ_e) was derived. It is found that the values of σ_e decrease with molecular weight at low molecular weight level and become constant for high molecular weight polymers. The chemically linked PEG block does not change the values of σ_e significantly. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

The role of the ratio (PEG:PPG) of a triblock copolymer (PPG‐b‐PEG‐b‐PPG) in the cure kinetics,miscibility and thermal and mechanical properties in an epoxy matrix

The aim of this study was to evaluate the role of different poly(ethylene glycol):poly(propylene glycol) (PEG:PPG) molar ratios in a triblock copolymer in the cure kinetics, miscibility and thermal and mechanical properties in an epoxy matrix. The poly(propylene glycol)‐block‐poly(ethylene glycol)‐block‐poly(propylene glycol) (PPG‐b‐PEG‐b‐PPG) triblock copolymers used had two different molecular masses: 3300 and 2000 g mol^?1. The mass concentration of PEG in the copolymer structure played a key role in the miscibility and cure kinetics of the blend as well as in the thermal–mechanical properties. Phase separation was observed only for blends formed with the 3300 g mol^?1 triblock copolymer at 20 wt%. Concerning thermal properties, the miscibility of the copolymer in the epoxy matrix reduced the T_g value by 13 °C, although a 62% increase in fracture toughness (K_IC) was observed. After the addition of PPG‐b‐PEG‐b‐PPG with 3300 g mol^?1 there was a reduction in the modulus of elasticity by 8% compared to the neat matrix; no significant changes were observed in T_g values for the immiscible system. The use of PPG‐b‐PEG‐b‐PPG with 2000 g mol^?1 reduced the modulus of elasticity by approximately 47% and increased toughness (K_IC) up to 43%. Finally, for the curing kinetics of all materials, the incorporation of the triblock copolymer PPG‐b‐PEG‐b‐PPG delayed the cure reaction of the DGEBA/DDM (DGEBA, diglycidyl ether of bisphenol A; DDM, Q3‐4,4′‐Diaminodiphenylmethane) system when there is miscibility and accelerated the cure reaction when it is immiscible. All experimental curing reactions could be fitted to the Kamal autocatalytic model presenting an excellent agreement with experimental data. This model was able to capture some interesting features of the addition of triblock copolymers in an epoxy resin. © 2018 Society of Chemical Industry     

Synthesis and characterization of biodegradable block copolymers of poly(propylene fumarate‐co‐sebacate)‐co‐poly(ethylene glycol) and poly(ethylene fumarate‐co‐sebacate)‐co‐poly(ethylene glycol)

The synthesis of two low molecular weight linear unsaturated oligoester precursors, poly(propylene fumarate‐co‐sebacate) (PPFS) and poly(ethylene fumarate‐co‐sebacate) (PEFS), are described. PPFS, PEFS, and poly(ethylene glycol) are then used to prepare poly(propylene fumarate‐co‐sebacate)‐co‐poly(ethylene glycol) (PPFS‐co‐PEG) and poly(ethylene fumarate‐co‐sebacate)‐co‐poly(ethylene glycol) (PEFS‐co‐PEG) block copolymers. The products thus obtained are investigated in terms of the molecular weight, composition, structure, thermal properties, and solubility behavior. A number of design parameters including the molecular weights of PPFS, PEFS, and PEG, the reaction time in the polymer synthesis, and the weight ratio of PEG to PPFS or to PEFS are varied to assess their effects on the product yield and properties. The hydrolytic degradation of PPFS‐co‐PEG and PEFS‐co‐PEG in an isotonic buffer (pH 7.4, 37°C) is investigated, and it is found that the fumarate ester bond cleaves faster than does the sebacate ester bond. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 295–300, 2004     

Synthesis of Triblock Copolymers via Photopolymerization of Styrene and Methyl Methacrylate Using Macrophotoinitiators Possessing Poly(ethylene glycol) Units

Macrophotoinitiators based on poly(ethylene glycol)s bearing benzyl tereftalmono amid moieties were synthesized by the reaction of poly(ethylene glycol) (PEG) terminated with terephtaloyl chloride and benzyl amine. The initiators possessing PEG with different molecular weights were used in the photoinduced radical polymerization of styrene (S) and methyl methacrylate (MMA) to yield poly(styrene-b-ethylene glycol-b-styrene) and poly(methyl methacrylate-ethylene glycol-b-methyl methacrylate) triblock copolymers. Characterization of macrophotoinitiators were performed by elemental anlysis, IR and ¹H-NMR spectrum. The elemental analysis results agreed with the theoretical values. The IR and ¹H-NMR spectra showed that the poly(ethylene glycol) units were reacting with the tereftloyl chloride and benzylamine. Characterization of the block copolymers was carried out by spectral measurements, GPC and fractional precipitation methods. The polydispersities of the block copolymers were observed between 1.2–2.32 for poly(methyl methacrylate-ethylene glycol-b-methyl methacrylate) and 1.25–1.90 for poly(styrene-b-ethylene glycol-b-styrene) from GPC measurements.     

Effect of miscibility on migration of third component in star‐like co‐continuous and disperse‐within‐disperse mixed brushes

Novel ternary mixed‐brush single crystals were designed with disperse‐within‐disperse and star‐like co‐continuous morphologies based on poly(ethylene glycol) (PEG)‐b‐polystyrene (PS)/PEG‐b‐poly(methyl methacrylate) (PMMA)/PEG‐b‐polyaniline (PANI) and PEG‐b‐PS/PEG‐b‐PMMA/PEG‐b‐(poly(?‐caprolactone) (PCL) or poly(l ‐lactide) (PLLA)) block copolymers, respectively. In the disperse‐within‐disperse ternary mixed brushes, PANI nanorods were dispersed within the matrix (PS)–dispersed (PMMA) amorphous brushes. The flexibility and rigidity of brushes mainly affected the ultimate morphology and arrangement of amorphous coiled brushes in the vicinity of PANI nanorods. In addition, the migration of PCL and PLLA crystallizable brushes was evident into PMMA phases dispersed in the PS matrix, leading to star‐like co‐continuous patterns of PCL and PLLA brushes. This phenomenon was related to the miscibility of crystallizable PCL and PLLA brushes with the PMMA phase. The migration of crystallizable PCL and PLLA brushes increased the size of PMMA domains in the star‐like co‐continuous patterns. Despite the larger osmotic pressure of PLLA brushes, their higher miscibility with PMMA chains reflected the greater PMMA dispersal and wider PLLA star‐like branches. © 2017 Society of Chemical Industry