A convenient scheme for synthesizing reduction‐sensitive chitosan‐based amphiphilic copolymers for drug delivery

A novel type of reduction‐sensitive graft copolymers, chitosan‐S‐S‐poly(ε‐caprolactone) (CS‐S‐S‐PCL, here ‐S‐S‐ means PCL was conjugated onto chitosan backbone through disulfide linkage), was synthesized through a convenient route using dithiodipropionic anhydride (DTDPA) as a disulfide donor. Reaction of hydroxy‐terminated poly(ε‐caprolactone) (PCL) with DTDPA quantitatively yielded DTDPA functionalized PCL (PCL‐S‐S‐COOH). The disulfide‐containing polyester was regioselectively conjugated onto the hydroxy groups of chitosan under mild and homogeneous conditions, utilizing dodecyl sulfate‐chitosan complexes (SCC) as an intermediate. The self‐assembly and Doxorubicin (Dox) release behavior of the copolymers were investigated. Spherical micelles could be formed through self‐assembly of CS‐S‐S‐PCL in aqueous media. The reduction‐sensitive behavior of CS‐S‐S‐PCL micelles was investigated by using Dithiothreitol (DTT) as a reductive reagent. In the presence of 10 mM DTT, the micelles gradually lost their aggregation stability and were precipitated out after four days. In addition, the Dox release was accelerated when the micelles were treated with DTT. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Thermoresponsive self‐assembled nanovesicles based on amphiphilic triblock copolymers and their potential applications as smart drug release carriers

A series of thermoresponsive triblock copolymers, methoxy poly(ethylene oxide)‐b‐poly(ε‐caprolactone)‐b‐poly(N‐isopropylacrylamide) (mPEO‐b‐PCL‐b‐PNIPAM), with different PCL and PNIPAM block lengths, were synthesized by a combination of ring opening polymerization and reversible addition‐fragmentation chain transfer polymerization techniques. The triblock copolymers undergo self‐assembly in aqueous solutions forming stable nanovesicles of various sizes with a lipid membrane structure similar to body cells as revealed by transmission electron microscopy. The nanovesicle is thermoresponsive, that is, its size is tunable using the temperature as a switch: shrinks at a temperature above the lower critical solution temperature (LCST) and expands at a temperature below the LCST. The corresponding LCST of the triblock copolymers is adjustable by varying the PNIAM segment length as well as the PCL segment length and covers a range from 33.9 to 41.0°C in water. The diameter of nanovesicles for mPEO_3k‐b‐PCL_5k‐b‐PNIPAM_13.2k is about 177.7 nm below the LCST and 138.9 nm above the LCST, as determined by dynamic light scattering. It was demonstrated using indomethacin, a popular anti‐inflammation medicine, that the triblock copolymers can effectively act as a drug release carrier under the right human physiological conditions, that is, store the drug at a lower temperature and release it at a higher temperature, possibly targeting at the lesion sites of human body. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41361.     

Lower critical solution temperature behavior of amphiphilic copolymers based on polyaspartamide derivatives

Novel copolymers consisting of poly(N‐isopropylaminoethyl‐co‐6‐hydroxyhexyl aspartamide) and poly (N‐isopropylaminoethyl‐co‐hexyl aspartamide) were prepared from polysuccinimide, which was the thermal polycondensation product of L ‐aspartic acid, via a ring‐opening reaction with 6‐amino‐L ‐hexanol (AH) or hexylamine (HA) and N‐isopropylethylenediamine at different ratios. The copolymers, containing 75–90 mol % of AH and 35–45 mol % of HA, produced thermoresponsive polymers through their lower critical solution temperatures (LCSTs) in aqueous solution. We could control the LCST could be controlled by modifying the hydrophobic–hydrophilic balance by changing the content of AH or HA. The pH dependencies of the LCST were opposite in these two different copolymer systems. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

6‐O‐dodecyl‐chitosan carbamate–based pH‐responsive polymeric micelles for gene delivery

pH‐responsiveness is highly desirable in the stimuli‐responsive controlled release because of the distinct advantages of the fast response of pH‐triggered release and the available pH‐difference between intra‐ and extra‐cells. The present work reported a kind of novel pH‐responsive polymeric micelles, which was derived from biopolymer of 6‐O‐dodecyl‐chitosan carbamate (DCC) and evaluated as gene‐controlled release vector. The amphiphilic and amino‐rich DDC was synthesized through a protection‐graft‐deprotection method. ¹³C CP/MAS NMR, FTIR, and elemental analysis identified that dodecyls were chemoselectively grafting at 6‐hydroxyls of chitosan via the pH‐responsive bonds of carbamate, and the substitute degree (SD) was 14%. Transmission electron microscopy (TEM) and dynamic light scattering (DLS) showed that DCC self‐assembled into polymeric micelles in aqueous solutions. The DCC polymeric micelles formed complexes with pDNA, which was elucidated by Gel retardation, TEM, and DLS. Transfection and cytotoxicity assays in A549 cells showed that DCC polymeric micelles were suitable for gene delivery. The improved transfection was attributed to the pH‐responsiveness and the moderate pDNA‐binding affinity, which led to easier release of pDNA intra‐cells. The synthesized DCC polymeric micelles might be a promising and safe candidate as nonviral vectors for gene delivery. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42469.     

Fabrication of thermoresponsive,core‐crosslinked micelles based on poly[N‐isopropyl acrylamide‐co‐3‐(trimethoxysilyl)propylmethacrylate]‐b‐poly{N‐[3‐(dimethylamino)propyl]methacrylamide} for the codelivery of doxorubicin and nucleic acid

Thermoresponsive amphiphilic copolymer, poly[N‐isopropyl acrylamide‐co‐3‐(trimethoxysilyl)propylmethacrylate]‐b‐poly{N‐[3‐(dimethylamino)propyl]methacrylamide} with a branched structure was designed and synthesized by consecutive reversible addition–fragmentation chain‐transfer polymerization. The further hydrolysis of trimethoxysilyl functions in 3‐(trimethoxysilyl) propyl methacrylate units led to the fabrication of core‐crosslinked (CCL) micelles with silica crosslinks at temperatures above the lower critical solution temperature of the poly(N‐isopropyl acrylamide) block. The thermally induced structural and morphological changes of the CCL micelles in aqueous solution were investigated by transmission electron microscopy and ¹H‐NMR analyses. The resulting CCL micelles were further explored as nanocarriers for the codelivery of an anticancer drug and nucleic acid for enhanced therapeutic efficacy. The CCL micelles effectively condensed the nucleic acid and mediated higher gene transfer in the presence of serum than in serum‐free transduction. A cytotoxicity study revealed that whereas the pure CCL micelles exhibited unapparent cytotoxicity, the codelivery of p53 and doxorubicin with the CCL micelle formulation resulted in better treatment efficiency than sole chemotherapy. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41752.     

Synthesis,characterization, and swelling behavior of new pH‐sensitive hydrogels derived from copolymers of 2‐hydroxyethyl methacrylate and 2‐(diisopropylamino)ethylmethacrylate

The aim of this work was to synthesize and to characterize new pH‐sensitive hydrogels that can be used in the controlled release of drugs, useful for dermal treatments or ophthalmology's therapies. Copolymers containing 2‐hydroxyethyl methacrylate (HEMA) with different amounts of 2‐(diisopropylamino)ethyl methacrylate (DPA) (10 and 30 wt %) and different amounts of crosslinker agent, ethylene glycol dimethacrylate (EGDMA) (1 and 3 wt %) were prepared by bulk photo‐polymerization. The copolymers were fully characterized by using Fourier‐transform infrared (FTIR) spectra, differential scanning calorimetry, thermogravimetric analysis, UV–visible spectroscopy, and measuring water content and dynamic swelling degree. The results show that modifications in the amount of DPA and/or crosslinker in the hydrogel produce variations in the thermal properties. When adding of DPA, we observed an increase in the thermal stability and decomposition temperature, as well as a change in the mechanism of decomposition. Also a decrease in the glass transition temperature was observed with regard to the value for pure pHEMA, by the addition of DPA. The water content of the hydrogels depends on the DPA content and it is inversely proportional to both the pH value and the crosslinking degree. Pure poly‐HEMA films did not show important changes over the pH range studied in this work. The dynamic swelling curves show the overshooting effect associated with the incorporation of DPA, the pH of the solution, and the crosslinking density. On the other hand, no important variations in the optical properties were observed. The synthesized hydrogels are useful as a drug delivery pH‐sensitive matrix. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Synthesis and characterization of 2‐hydroxyethylmethacrylate/2‐(3‐indol‐yl)ethylmethacrylamide‐based novel hydrogels as drug carrier with in vitro antibacterial properties

In this study, a new cationic monomer 2‐(3‐indol‐yl)ethylmethacrylamide (IEMA) derived from tryptamine was synthesized in a single step and characterized by Fourier transform infrared (FTIR), ¹H‐NMR, and ¹³C‐NMR. Then, one‐step preparation of novel poly[2‐hydroxyethylmethacrylate‐c‐2‐(3‐indol‐yl)ethylmethacrylamide], or p(HEMA‐c‐IEMA), copolymeric hydrogels has been performed successfully with IEMA and 2‐hydroxyethylmethacrylate (HEMA) as monomers using free radical aqueous polymerization. The hydrogels were characterized with scanning electron microscopy, FTIR, elemental analysis, thermogravimetric analysis, and texture profile analysis instruments. p(HEMA‐c‐IEMA) hydrogels were used for swelling, diffusion, drug release, and antibacterial activity studies. The drug‐release behavior of the hydrogels was determined as a function of time at 37 °C in pH 1.2 and 7.2. The swelling and drug‐release studies showed that an increased IEMA amount caused a higher increase in swelling and drug‐release values. Additionally, zero‐order, first‐order, and Higuchi equation kinetic models were applied to the drug‐release data, and the data fit well in the Higuchi model, and the Peppas power‐law model was applied to the release mechanism. Finally, the antibacterial activities of the hydrogels were screened against Gram‐positive bacteria (Bacillus cereus and Staphylococcus aureus) and Gram‐negative bacteria (Escherichia coli and Salmonella typhimurium). © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 45550.     

Development of a thermosensitive grafted drug delivery system—synthesis and characterization of NIPAAm‐based grafts and hydrogel structure

A thermosensitive grafted hydrogel was investigated for heating‐activated drug release. The hydrogel was created by grafting oligomers of N‐isopropylacrylamide‐co‐acrylamide (AAm) to a poly(2‐hydroxyethyl methacrylate), or PHEMA, hydrogel. N‐Isopropylacrylamide‐co‐AAm oligomers were synthesized with a range of compositions to raise the lower critical solution temperature (LCST) above physiological temperature. PHEMA hydrogels with these thermosensitive grafts were synthesized by free‐radical solution polymerization, using an acrylated version of the oligomers. The oligomers were characterized for their molecular weight, LCSTs, and rate of response to a change in temperature. With the flexibility in tuning their properties by varying reaction parameters, these oligomers present possibilities in several fields, including drug delivery. The impact of cross‐linking agent type and the amount and presence of grafts on the polymer network structure was found by determining the hydrogel mesh sizes. PHEMA gels cross‐linked with methylenebisacrylamide had larger mesh sizes than those cross‐linked with ethylene glycol dimethacrylate. Increasing amounts of cross‐linking agent decreased mesh sizes. LCSTs exhibited by oligomers were slightly lower than those exhibited by polymer gels of the same composition. The grafting reaction was found to have only a slight impact on the hydrogel mesh size. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Grafting of N‐vinyl caprolactam and methacrylic acid onto silicone rubber films for drug‐eluting products

Silicone rubber (SR), a material widely used in the biomedical field, was modified with stimuli‐responsive poly(N‐vinyl caprolactam) (PVCL) and poly(methacrylic acid) (PMAA) with the aim of improving its ability to host drug molecules. The grafting of PVCL and PMAA onto SR was carried out by means of a γ‐ray preirradiation method, and the dependence of the grafting yield on the comonomer concentration, preirradiation dose, temperature, and reaction time was evaluated. Modified SR films were characterized by Fourier transform infrared spectroscopy, differential scanning calorimetry, thermogravimetric analysis, and swelling studies to confirm the grafting of the copolymer. The SR‐g‐[vinyl caprolactam (VCL)/methacrylic acid (MAA)] copolymers showed a sensitivity to the temperature and pH, high hemocompatibility, and low affinity to bovine serum albumin and fibrinogen proteins. Moreover, the SR‐g‐(VCL/MAA) copolymers were able to host some nonsteroidal anti‐inflammatory drugs, such as diclofenac and ibuprofen, and the antifungal agent nystatin. The graft copolymer was shown to be useful for providing sustained release for several hours; this indicates that the modified SR is a promising material for drug‐eluting medical devices. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41855.     

Swelling kinetics,mechanical properties,and release characteristics of chitosan‐based semi‐IPN hydrogels

Two series of pH‐sensitive semi‐interpenetrating network hydrogels (semi‐IPN) based on chitosan (CS) natural polymer and acrylamide (AAm) and/or N‐hydroxymethyl acrylamide (HMA) monomers by varying the monomer and CS ratios were synthesized by free radical chain polymerization. 5‐Fluorouracil (5‐FU), a model anticancer drug, has been added to the feed composition before the polymerization. The characterization of gels indicated that the drug is molecularly dispersed in the polymer matrix. The swelling kinetics of drug‐loaded gels have decreased with increased HMA content at 37°C in both distilled water and buffer solutions with a pH of 2.1 or 7.4. Elastic modulus of the gels increased with the increase in HMA content and higher CS concentration enhanced the elastic modulus positively. Moreover, cumulative release percentages of the gels for 5‐FU were ca. 10% higher in pH 2.1 than those in pH 7.4 media. It was determined that they can be suitable for the use in both gastric and colon environments. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41886.     

In vitro evaluation of efficacy of dihydroartemisinin‐loaded methoxy poly(ethylene glycol)/poly(l‐lactic acid) amphiphilic block copolymeric micelles

Dihydroartemisinin (DHA)‐loaded methoxy poly(ethylene glycol)/poly(l ‐lactic acid) (mPEG₅₀₀₀—PLLA₃₂₀₀) amphiphilic block copolymeric micelles (DHA‐CM) have been prepared using modified solvent evaporation method. Physicochemical properties of DHA‐CM were investigated by using dynamic light scattering, transmission electron microscopy, high‐performance liquid chromatography, and Fourier transform infrared. Polymers formed stable, spherical, and worm‐like micelles with mean sizes smaller than 130 nm. In vitro release experiments revealed that DHA‐CM provided a more solubilizing effect than DHA suspension; in addition, it was showed that drug release profiles highly depended on pH values of dissolution media. Various types of lyoprotectants were tested to improve the redispersion performance of the freeze‐dried products. 3‐(4, 5‐dimethyl‐ thiazol‐2‐yl)‐2, 5‐diphenyl tetrazolium bromide assay was used to evaluate the cytotoxicity of micellar solutions of freeze‐dried DHA‐CM. The results showed that the IC₅₀ values of DHA‐CM and DHA suspension for KB cell lines were 18.70 and 24.55 μM, respectively. However, DHA‐CM had little cytotoxicity for L02 cell lines. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Poly(ε‐caprolactone)‐graft‐poly(N‐isopropylacrylamide) amphiphilic copolymers prepared by a combination of ring‐opening polymerization and atom transfer radical polymerization: Synthesis,self‐assembly,and thermoresponsive property

Thermoresponsive graft copolymers of ε‐caprolactone and N‐isopropylacrylamide were synthesized by a combination of ring‐opening polymerization and the sequential atom transfer radical polymerization (ATRP). The copolymer composition, chemical structure, and the self‐assembled structure were characterized. The graft length and density of the copolymers were well controlled by varying the feed ratio of monomer to initiator and the fraction of chlorides along PCL backbone, which is acting as the macroinitiator for ATRP. In aqueous solution, PCL‐g‐PNIPAAm can assemble into the spherical micelles which comprise of the biodegradable hydrophobic PCL core and thermoresponsive hydrophilic PNIPAAm corona. The critical micelle concentrations of PCL‐g‐PNIPAAm were determined under the range of 6.4–23.4 mg/L, which increases with the PNIPAAm content increasing. The mean hydrodynamic diameters of PCL‐g‐PNIPAAm micelles depend strongly on the graft length and density of the PNIPAAm segment, allowing to tune the particle size within a wide range. Additionally, the PCL‐g‐PNIPAAm micelles exhibit thermosensitive properties and aggregate when the temperature is above the lower critical solution temperature. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 41115.     

Clustered assembly of Au nanoparticles from spherical diblock copolymer micelles encapsulating Au nanoparticle

Superstructures composed of diblock copolymer micelles and inorganic nanoparticles are quite interesting because the specific arrangement of inorganic nanoparticles within the micellar structure can reveal interesting opportunities in many field of science. In this perspective, we report a simple method to produce clustered assembly of Au nanoparticles in the micelles in attempt to induce plasmonic coupling among multiple Au nanoparticles in the assembled structures. Here, we utilized polystyrene‐block‐poly(acrylic acid), PS‐PAA, micelles containing single Au nanoparticle in the core (Au@PS‐PAA micelles) as building materials to initiate next‐level assembling process. In particular, the addition of HCl to the solution of Au@PS‐PAA micelles affected the overall equilibrium condition as well as kinetic process in the micellar solution. As a result, individual Au@PS‐PAA micelles could be merged together to form more large micelles with inclusion of multiple nanoparticles in the core, the process of which was accompanied with plasmonic coupling of Au nanoparticles. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44693.     

Thermosensitive self‐assembly micelles from A2BA2‐type poly(N‐isopropyl acrylamide)2‐b‐Poly(lactic acid)‐b‐Poly(N‐isopropyl acrylamide)2 four‐armed star block copolymers and their applications as drug carriers

A novel A₂BA₂‐type thermosensitive four‐armed star block copolymer, poly(N‐isopropyl acrylamide)₂‐b‐poly(lactic acid)‐b‐poly(N‐isopropyl acrylamide)₂, was synthesized by atom transfer radical polymerization and characterized by ¹H‐NMR, Fourier transform infrared spectroscopy, and size exclusion chromatography. The copolymers can self‐assemble into nanoscale spherical core–shell micelles. Dynamic light scattering, surface tension, and ultraviolet–visible determination revealed that the micelles had hydrodynamic diameters (D_h) below 200 nm, critical micelle concentrations from 50 to 55 mg/L, ζ potentials from ?7 to ?19 mV, and cloud points (CPs) of 34–36°C, depending on the [Monomer]/[Macroinitiator] ratios. The CPs and ζ potential absolute values were slightly decreased in simulated physiological media, whereas D_h increased somewhat. The hydrophobic camptothecin (CPT) was entrapped in polymer micelles to investigate the thermo‐induced drug release. The stability of the CPT‐loaded micelles was evaluated by changes in the CPT contents loaded in the micelles and micellar sizes. The MTT cell viability was used to validate the biocompatibility of the developed copolymer micelle aggregates. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 130: 4137–4146, 2013     

pH responsive polymers with amino acids in the side chains and their potential applications

Design and synthesis of pH responsive polymeric materials has become an important subject in academia as well as in industrial field in recent years due to their applications in diverse field including controlled drug delivery, biomedical applications, membrane science, sensors and actuators, oil recovery, colloid stabilization, etc. Efforts have been made to incorporate stimuli‐responsive biomolecules in synthetic polymers to develop pH responsive “smart” non‐biological hybrid macromolecules with high water solubility, enhanced biocompatibility, bio‐mimetic structure and properties. This review is focused on the recent advances in side‐chain amino acid‐based pH responsive polymers synthesis and potential application aspects of these macromolecular architectures in drug and gene delivery, and other fields. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 41084.     

Biocompatible and biodegradable alginate/poly(N‐isopropylacrylamide) hydrogels for sustained theophylline release

Mixed‐interpenetrated polymeric networks based on sodium alginate (ALG) and poly(N‐isopropylacryl amide) (PNIPAAm) covalently cross‐linked with N,N'‐methylenebisacrylamide are studied for their biocompatibility, nontoxicity, and biodegradability aiming their application in drug delivery. The presence of drug‐polymeric matrix interactions and the distribution of the drug in the polymeric network for theophylline‐loaded ALG/PNIPAAm hydrogels are also investigated by spectroscopic and microscopic methods. The quantitative evaluation of theophylline loaded hydrogels performed by NIR‐CI technique shows a better drug entrapment and a higher homogeneity of the samples with increased alginate content. The thermal behavior of the hydrogels is significantly modified by theophylline presence. The application of the ALG/PNIPAAm hydrogels as carriers for sustained drug release formulations was assessed by the theophylline release tests performed both by in vitro and in vivo studies. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40733.     

Temperature,pH, and reduction triple‐stimuli‐responsive inner‐layer crosslinked micelles as nanocarriers for controlled release

Temperature, pH, and reduction triple‐stimuli‐responsive inner‐layer crosslinked micelles as nanocarriers for drug delivery and release are designed. The well‐defined tetrablock copolymer poly(polyethylene glycol methacrylate)–poly[2‐(dimethylamino) ethyl methacrylate]–poly(N‐isopropylacrylamide)–poly(methylacrylic acid) (PPEGMA‐PDMAEMA‐PNIPAM‐PMAA) is synthesized via atom transfer radical polymerization, click chemistry, and esterolysis reaction. The tetrablock copolymer self‐assembles into noncrosslinked micelles in acidic aqueous solution. The core‐crosslinked micelles, shell‐crosslinked micelles, and shell–core dilayer‐crosslinked micelles are prepared via quaternization reaction or carbodiimide chemistry reaction. The crosslinked micelles are used as drug carriers to load doxorubicin (DOX), and the drug encapsulation efficiency with 20% feed ratio reached 59.2%, 73.1%, and 86.1%, respectively. The cumulative release rate of DOX is accelerated by single or combined stimulations. The MTT (3‐(4,5‐Dimethylthiazol‐2‐yl)‐2,5‐diphenyltetrazolium bromide) assay verifies that the inner‐layer crosslinked micelles show excellent cytocompatibility, and DOX‐loaded micelles exhibit significantly higher inhibition for HepG2 cell proliferation. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46714.     

Thermoresponsive hydrogels based on sucrose 1‐O′‐methacrylate and N‐isopropylacrylamide: Synthesis,properties, and applications

Chemically crosslinked hydrogels composed of carbohydrate‐based and thermoresponsive monomers, sucrose 1‐O′‐methacrylate (SMA), sucrose dimethacrylate, and N‐isopropylacrylamide, respectively, were synthesized by free radical polymerization. These materials were characterized with respect to their composition, thermoresponsiveness, porosity, degradability, and as drug and protein delivery systems. Swelling studies, thermomechanical analysis, and differential scanning calorimetry showed that the lower critical solution temperature behavior of the hydrogels can be controlled by the SMA amount in the copolymers. On the other hand, thermoporometry showed that the pore size is somewhat dependent on the composition, which is confirmed by scanning electron microscopy. Hydrolytic degradation studies indicated that SMA side chains, as well as the crosslinker (sucrose dimethacrylate), are hydrolysable at corporeal temperature and pH 10, and the water swelling capability of the resulting materials increases as the hydrolysis degree increases. Finally, protein delivery studies revealed that the kinetics of release can be tailored by the copolymer composition. The results of this study suggest the potential application of these hydrogels in drug delivery systems and tissue engineering. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 45495.     

pH‐sensitive hydroxyethyl starch–doxorubicin conjugates as antitumor prodrugs with enhanced anticancer efficacy

Doxorubicin (DOX) is a widely used chemotherapeutic drug for the treatment of several types of cancers, which has limitation in clinical applications because of severe heart toxicity. Herein, to reduce the fast clearance from the blood system and the severe systemic toxicity caused by the nonspecific protein adsorption, a pH‐sensitive drug delivery system with higher drug conjugated content was prepared by conjugating DOX onto hydroxyethyl starch (HES) with a pH‐sensitive hydrazone bond. In normal physiological environment, the release of DOX conjugated onto HES was slight which could be neglected without any side effect. However, in an acidic environment mimicking the tumor microenvironment, this pH‐sensitive hydrazone linkage provided a controlled and sustained release of DOX over a period of more than 3 days. The conjugates had good biocompatibility, long circulation, and lower cytotoxicity, which could efficiently be transferred into HeLa and HepG2 cells and release the conjugated drug. Based on these promising properties, these HES–DOX conjugates outline the significant potential for future biomedical application in the controlled release of antitumor drugs. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42778.     

Hollow,pH‐sensitive calcium–alginate/poly(acrylic acid) hydrogel beads as drug carriers for vancomycin release

In this study, hollow calcium–alginate/poly(acrylic acid) (PAA) hydrogel beads were prepared by UV polymerization for use as drug carriers. The hollow structure of the beads was fortified by the incorporation of PAA. The beads exhibited different swelling ratios when immersed in media at different pH values; this demonstrated that the prepared hydrogel beads were pH sensitive. A small amount (<9%) of vancomycin that had been incorporated into the beads was released in simulated gastric fluid, whereas a large amount (≤67%) was released in a sustained manner in simulated intestinal fluid. The observed drug‐release profiles demonstrated that the prepared hydrogel beads are ideal candidate carriers for vancomycin delivery into the gastrointestinal tract. Furthermore, the biological response of cells to these hydrogel beads indicated that they exhibited good biological safety and may have additional applications in tissue engineering. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010