Influence of Risk Factors for Male Infertility on Sperm Protein Composition

Male infertility is a common health problem that can be influenced by a host of lifestyle risk factors such as environment, nutrition, smoking, stress, and endocrine disruptors. These effects have been largely demonstrated on sperm parameters (e.g., motility, numeration, vitality, DNA integrity). In addition, several studies showed the deregulation of sperm proteins in relation to some of these factors. This review inventories the literature related to the identification of sperm proteins showing abundance variations in response to the four risk factors for male infertility that are the most investigated in this context: obesity, diabetes, tobacco smoking, and exposure to bisphenol-A (BPA). First, we provide an overview of the techniques used to identify deregulated proteins. Then, we summarise the main results obtained in the different studies and provide a compiled list of deregulated proteins in relation to each risk factor. Gene ontology analysis of these deregulated proteins shows that oxidative stress and immune and inflammatory responses are common mechanisms involved in sperm alterations encountered in relation to the risk factors.     

A New Criterion to Evaluate Water Vapor Interference in Protein Secondary Structural Analysis by FTIR Spectroscopy

Second derivative and Fourier self-deconvolution (FSD) are two commonly used techniques to resolve the overlapped component peaks from the often featureless amide I band in Fourier transform infrared (FTIR) curve-fitting approach for protein secondary structural analysis. Yet, the reliability of these two techniques is greatly affected by the omnipresent water vapor in the atmosphere. Several criteria are currently in use as quality controls to ensure the protein absorption spectrum is negligibly affected by water vapor interference. In this study, through a second derivative study of liquid water, we first argue that the previously established criteria cannot guarantee a reliable evaluation of water vapor interference due to a phenomenon that we refer to as sample’s absorbance-dependent water vapor interference. Then, through a comparative study of protein and liquid water, we show that a protein absorption spectrum can still be significantly affected by water vapor interference even though it satisfies the established criteria. At last, we propose to use the comparison between the second derivative spectra of protein and liquid water as a new criterion to better evaluate water vapor interference for more reliable second derivative and FSD treatments on the protein amide I band.     

Chronic Prostatitis/Chronic Pelvic Pain Syndrome Leads to Impaired Semen Parameters,Increased Sperm DNA Fragmentation and Unfavorable Changes of Sperm Protamine mRNA Ratio

Background: Chronic Prostatitis/Chronic Pelvic Pain Syndrome (CP/CPPS) is a frequent disease affecting men of every age and accounting for a great number of consultations at urology departments. Previous studies suggested a negative impact of CP/CPPS on fertility. As increasing attention has been attributed to additional aspects, such as sperm DNA integrity and sperm protein alterations, besides the WHO standard semen analysis when assessing male fertility, in this prospective study, we aimed to further characterize the fertility status in CP/CPPS patients with a focus on these parameters. Methods: Sperm DNA fragmentation measured by sperm chromatin structure assay (SCSA) and protamine 1 to protamine 2 mRNA ratio assessed by RT-qPCR were analyzed along with conventional ejaculate parameters and inflammatory markers in 41 CP/CPPS patients and 22 healthy volunteers. Results: We found significant differences between the groups concerning multiple conventional ejaculate parameters. A significant increase in sperm DNA fragmentation was shown in CP/CPPS patients with association to other sperm parameters. The majority of CP/CPPS patients exhibited protamine mRNA ratios out of the range of regular fertility. Conclusions: This is a pioneering study with a strong practical orientation revealing that CP/CPPS leads to increased sperm DNA damage and changes in sperm protamine levels, emphasizing an unfavorable impact of CP/CPPS on fertility.     

UV—Vis光谱法与FT—IR光谱法研究聚苯乙烯老化

用紫外-可见光谱法与付里叶变换红外光谱法研究聚苯乙烯以及苯乙烯-丙烯酸酯共聚物的老化过程。在光、热、氧的作用下,这些聚合物的部分主链与侧苯基断裂,有少量苯乙酮结构生成,导致材料变色。     

A Review on the Role of Bicarbonate and Proton Transporters during Sperm Capacitation in Mammals

Alkalinization of sperm cytosol is essential for plasma membrane hyperpolarization, hyperactivation of motility, and acrosomal exocytosis during sperm capacitation in mammals. The plasma membrane of sperm cells contains different ion channels implicated in the increase of internal pH (pH_i) by favoring either bicarbonate entrance or proton efflux. Bicarbonate transporters belong to the solute carrier families 4 (SLC4) and 26 (SLC26) and are currently grouped into Na⁺/HCO₃⁻ transporters and Cl⁻/HCO₃⁻ exchangers. Na⁺/HCO₃⁻ transporters are reported to be essential for the initial and fast entrance of HCO₃⁻ that triggers sperm capacitation, whereas Cl⁻/HCO₃⁻ exchangers are responsible for the sustained HCO₃⁻ entrance which orchestrates the sequence of changes associated with sperm capacitation. Proton efflux is required for the fast alkalinization of capacitated sperm cells and the activation of pH-dependent proteins; according to the species, this transport can be mediated by Na⁺/H⁺ exchangers (NHE) belonging to the SLC9 family and/or voltage-gated proton channels (HVCN1). Herein, we discuss the involvement of each of these channels in sperm capacitation and the acrosome reaction.     

Application of FTIR Spectroscopy to Detect Changes in Skeletal Muscle Composition Due to Obesity with Insulin Resistance and STZ-Induced Diabetes

Age, obesity, and diabetes mellitus are pathophysiologically interconnected factors that significantly contribute to the global burden of non-communicable diseases. These metabolic conditions are associated with impaired insulin function, which disrupts the metabolism of carbohydrates, lipids, and proteins and can lead to structural and functional changes in skeletal muscle. Therefore, the alterations in the macromolecular composition of skeletal muscle may provide an indication of the underlying mechanisms of insulin-related disorders. The aim of this study was to investigate the potential of Fourier transform infrared (FTIR) spectroscopy to reveal the changes in macromolecular composition in weight-bearing and non-weight-bearing muscles of old, obese, insulin-resistant, and young streptozotocin (STZ)-induced diabetic mice. The efficiency of FTIR spectroscopy was evaluated by comparison with the results of gold-standard histochemical techniques. The differences in biomolecular phenotypes and the alterations in muscle composition in relation to their functional properties observed from FTIR spectra suggest that FTIR spectroscopy can detect most of the changes observed in muscle tissue by histochemical analyses and more. Therefore, it could be used as an effective alternative because it allows for the complete characterization of macromolecular composition in a single, relatively simple experiment, avoiding some obvious drawbacks of histochemical methods.     

原位FTIR研究含磷阻燃PET的阻燃机理

采用原位傅里叶变换红外光谱并结合热分析等手段研究了含磷阻燃聚酯的热解过程。通过与未加阻燃剂聚酯的比较,得出阻燃剂分子抑含磷阻燃聚酯聚合物中肪肪族ＣＨ２基的氧化,捕获热产生的可燃物,促使聚酯成碳形成的惰性隔层,从而达到阻燃目的。     

Study of Vinyl Acetate Partitioning in Emulsion Copolymerization of Vinyl Chloride-Vinyl Acetate by FTIR and HNMR Spectroscopy

Emulsion copolymerization of vinyl chloride with vinyl acetate comonomer was performed. Potassium persulfate, a mixture of stearyl alcohol and sodium lauryl sulfate, was used and reactions were performed at 55 °C in a pressurized reactor. By sampling during the reaction in different intervals copolymer composition was investigated using FTIR and NMR spectroscopy. The results showed that the partitioning of vinyl acetate in the copolymerization in general follows the Mayo-Lewis copolymerization equation with some discrepancy. This was attributed to the gaseous nature of vinyl chloride monomer and the differences between polymerization in heterogeneous and homogeneous systems. Both FTIR and NMR spectroscopy showed two peaks in vinyl acetate content of copolymer beyond 65% conversion which was attributed to the elimination of vinyl chloride droplets in the media and replacing them with vinyl acetate monomer. The first increase is related to the consumption of vinyl chloride droplets and the second is related to the consumption of gaseous vinyl chloride; in both instances vinyl acetate governs the polymerization.     

Combined Spectroscopic and Calorimetric Studies to Reveal Absorption Mechanisms and Conformational Changes of Protein on Nanoporous Biomaterials

In this study the effect of surface modification of mesoporous silica nanoparticles (MSNs) on its adsorption capacities and protein stability after immobilization of beta-lactoglobulin B (BLG-B) was investigated. For this purpose, non-functionalized (KIT-6) and aminopropyl-functionalized cubic Ia3d mesoporous silica ([n-PrNH₂-KIT-6]) nanoparticles were used as nanoporous supports. Aminopropyl-functionalized mesoporous nanoparticles exhibited more potential candidates for BLG-B adsorption and minimum BLG leaching than non-functionalized nanoparticles. It was observed that the amount of adsorbed BLG is dependent on the initial BLG concentration for both KIT-6 and [n-PrNH₂-KIT-6] mesoporous nanoparticles. Also larger amounts of BLG-B on KIT-6 was immobilized upon raising the temperature of the medium from 4 to 55 °C while such increase was undetectable in the case of immobilization of BLG-B on the [n-PrNH₂-KIT-6]. At temperatures above 55 °C the amounts of adsorbed BLG on both studied nanomaterials decreased significantly. By Differential scanning calorimetry or DSC analysis the heterogeneity of the protein solution and increase in Tm may indicate that immobilization of BLG-B onto the modified KIT-6 results in higher thermal stability compared to unmodified one. The obtained results provide several crucial factors in determining the mechanism(s) of protein adsorption and stability on the nanostructured solid supports and the development of engineered nano-biomaterials for controlled drug-delivery systems and biomimetic interfaces for the immobilization of living cells.     

Live Imaging and Quantitation of Lipid Droplets and Mitochondrial Membrane Potential Changes with Aggregation-Induced Emission Luminogens in an in Vitro Model of Liver Steatosis

High specificity, low background, good biocompatibility and photostability are common properties of aggregation-induced emission luminogens (AIEgens). In this study, an AIEgen FAS was used in live HepG2 cells, an in vitro model of liver steatosis, to quantify lipid droplet number and size instead of the traditional method of only measuring fluorescence intensity emitted from fluorescence dye stained in lipid droplet. In parallel, another AIEgen, TPE-Ph-In, was used to perform continuous monitoring and quantitation of mitochondrial membrane potential in the same batch of live HepG2 cells. The data show a significant increase in lipid droplet numbers after 24 h treatment by amiodarone and a significant increase in both lipid droplet numbers and size after 48 h amiodarone treatment. Moreover, the data suggest a significant increase in mitochondria membrane potential in cells treated with amiodarone for 24 and 48 h, with restoration to pre-treatment level 24 h after removal of the amiodarone. Further investigation is needed to fully understand the underlying mechanism.     

NOx adsorption on MnO2/NaY composite: an in situ FTIR and EPR study

The NO, NO/O₂, and NO/O₂/H₂O adsorption on MnO₂/NaY (5 and 15 wt.% MnO₂) composite catalyst and NaY has been studied by means of in situ FTIR and EPR spectroscopy at elevated temperatures and during heating under reaction-like conditions. NO adsorption and co-adsorption of NO and O₂ on NaY and MnO₂/NaY proceeds via oxidation of NO forming NO₂⁻ and NO₃⁻ species. Whereas the manganese dioxide preferably acts as oxidising agent, the zeolite stores the NO_x species as nitrite and nitrate ions in the solid. In the presence of oxygen, the nitrate formation is enhanced due to additional oxidation of NO through gaseous oxygen leading to NO₂. Dimerisation of NO₂ to N₂O₄ and following disproportionation of the latter causes the formation of NO⁺ and NO₃⁻ species which are associated with nucleophilic zeolitic oxygen and especially alkali cations of the zeolite, respectively. The presence of oxygen facilitates reoxidation of Mn²⁺ which keeps more Mn ions in the active state. Pre-adsorbed water and higher amounts of water vapour in the feed hinder the NO adsorption by blocking the adsorption sites and shift the nitrate formation to higher temperatures. The quantities and thermal stability of the nitrates formed during NO and NO/O₂ adsorption differs which points to a different mechanism of nitrate formation. In the absence of gaseous oxygen, nitrates are formed by participation of only lattice oxygen. In the presence of oxygen, nitrate formation by dimerisation and disproportionation reactions of NO₂ dominates. The manganese component of the composite catalyst supports the oxidation of NO to nitrite and subsequently to nitrate. During this process Mn⁴⁺ is reduced to Mn²⁺ as evidenced by in situ EPR measurements.     

Effect of Alkaline and Oxidative Treatment on Sawdust Capacity to Remove Cd(II) from Aqueous Solutions: FTIR and AFM Study

Two treatments, sodium hydroxide and hydrogen peroxide, were applied to enhance the capacity of fir tree (Abies alba) sawdust to adsorb Cd(II). Fourier transform infrared spectroscopy (FTIR) analysis and atomic force microscopy (AFM) were used to characterize untreated and treated fir tree sawdust. The removal of Cd(II) ions by treated sawdust was dependent on the initial Cd(II) concentration, initial pH, and temperature. Kinetics (pseudo-first-, pseudo-second-order, intra-particle, and film diffusion models) and isotherm models (Langmuir and Freundlich) of the considered biosorption process were examined. The pseudo-second-order model was found to better model the kinetics of Cd(II) adsorption. Maximum adsorption capacities calculated using the Langmuir model are 8.84 and 2.67 mg/g for NaOH and H₂O₂ treated sawdust, respectively, and 2.20 mg/g for untreated sawdust. The results indicate that the two treatments enhanced the adsorption capacity of the studied sawdust.     

Analysis of the Content of Fatty Acid Methyl Esters in Biodiesel by Fourier-Transform Infrared Spectroscopy: Method and Comparison with Gas Chromatography

The increasing importance of sustainability in energy production has led to a global commitment to the use of fuels derived from renewable biological sources, such as biodiesel produced from plant crops or biomass residues, that do not compete with human food for their production. For a biofuel to be considered biodiesel, it must satisfy the specifications described in the UNE 14214, with the UNE-EN 14103 referring to the determination of fatty acid methyl ester content. This standard applies gas chromatography as an analytical technique. Gas chromatography is a widely used technique in the analysis of methyl ester although it has a number of drawbacks such as: long analysis times, a high consumption of high-quality gases and internal standards, does not allow the analysis of different compounds with the same column, etc. From an industrial production point of view, is necessary to know the fatty acid methyl ester content in biodiesel samples quickly. This paper studies the development of an analytical method using Fourier transform infrared spectroscopy (FTIR) as alternative to gas chromatography (GC), since it is a simple, rapid, and precise analytical technique to quantify fatty acid methyl ester content in biofuel samples.     

CO adsorption and correlation between CO surface coverage and activity/selectivity of preferential CO oxidation over supported Ag catalyst: an in situ FTIR study

In situ IR measurements for CO adsorption and preferential CO oxidation in H₂-rich gases over Ag/SiO₂ catalysts are presented in this paper. CO adsorbed on the Ag/SiO₂ pretreated with oxygen shows a band centered around 2169 cm^–1, which is assigned to CO linearly bonded to Ag⁺ sites. The amount of adsorbed CO on the silver particles (manifested by an IR band at 2169 cm^–1) depends strongly on the CO partial pressure and the temperature. The steady-state coverage on the Ag surface is shown to be significantly below saturation, and the oxidation of CO with surface oxygen species is probably via a non-competitive Langmuir–Hinshelwood mechanism on the silver catalyst which occurs in the high-rate branch on a surface covered with CO below saturation. A low reactant concentration on the Ag surface indicates that the reaction order with respect to Pco is positive, and the selectivity towards CO₂ decreases with the decrease of Pco. On the other hand, the decrease of the selectivity with the reaction temperature also reflects the higher apparent activation energy for H₂ oxidation than that for CO oxidation.     

PP1, PP2A and PP2B Interplay in the Regulation of Sperm Motility: Lessons from Protein Phosphatase Inhibitors

Male fertility relies on the ability of spermatozoa to fertilize the egg in the female reproductive tract (FRT). Spermatozoa acquire activated motility during epididymal maturation; however, to be capable of fertilization, they must achieve hyperactivated motility in the FRT. Extensive research found that three protein phosphatases (PPs) are crucial to sperm motility regulation, the sperm-specific protein phosphatase type 1 (PP1) isoform gamma 2 (PP1γ2), protein phosphatase type 2A (PP2A) and protein phosphatase type 2B (PP2B). Studies have reported that PP activity decreases during epididymal maturation, whereas protein kinase activity increases, which appears to be a requirement for motility acquisition. An interplay between these PPs has been extensively investigated; however, many specific interactions and some inconsistencies remain to be elucidated. The study of PPs significantly advanced following the identification of naturally occurring toxins, including calyculin A, okadaic acid, cyclosporin, endothall and deltamethrin, which are powerful and specific PP inhibitors. This review aims to overview the protein phosphorylation-dependent biochemical pathways underlying sperm motility acquisition and hyperactivation, followed by a discussion of the PP inhibitors that allowed advances in the current knowledge of these pathways. Since male infertility cases still attain alarming numbers, additional research on the topic is required, particularly using other PP inhibitors.     

Degradation of biomedical polydimethylsiloxanes during exposure to in vivo biofilm environment monitored by FE‐SEM,ATR‐FTIR,and MALDI‐TOF MS

Polymers used for biomedical purposes in medical devices are usually requested to be inert to degradation. This article describes that slow irreversible changes were observed in silicone surfaces exposed to in vivo biofilms even if silicone, in general, is supposed to have excellent long‐term properties. Tracheostomy tubes made of silicone rubber were exposed to in vivo biofilm environments in clinical tests for periods of 1, 3, and 6 months. The chemical degradation was monitored by MALDI‐TOF MS, ATR‐FTIR, and FE‐SEM. In addition, the physical changes were monitored by contact angle and hardness measurements. Cyclic polydimethylsiloxane (PDMS) was detected on the surfaces of new (unaged) silicones. On the surfaces of the in vivo samples new compounds, presumably linear methyl‐hydroxyl‐terminated PDMS, were detected in addition to cyclic PDMS. These compounds may be formed as a result of the hydrolysis of linear dimethyl terminated PDMS, which is also present in the silicone rubber. ATR‐FTIR spectroscopy confirmed that hydrolysis had indeed occurred during the in vivo exposure, since Si? OH groups were detected. Furthermore, significant changes in the topography were detected by FE‐SEM, indicating the initiation of degradation. No significant changes in the contact angle of the in vivo used samples were observed, but this information may be shielded by the fact that biofilm may remain on the surface, despite the thorough cleaning before the analysis. It is also possible that the surface hydrophobicity was recovered by the diffusion of linear low‐molecular‐weight compounds from the bulk. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Spatially resolved degradation in heterophasic polymers by ESR imaging and FTIR: The case of propylene-ethylene copolymers

Heterophasic propylene-ethylene copolymers (HPEC) containing bis(2,2,6,6-tetramethyl-4-piperidinyl) sebacate (Tinuvin 770) as a hindered amine stabilizer (HAS) were thermally aged at 393 and 433 K. Two types of HPEC were examined, containing 25% and 10% ethylene (E), respectively, as ethylene/propylene rubber (EPR). Electron spin resonance (ESR) spectra of nitroxide radicals in HPEC were studied in the temperature range 100–433 K; the nitroxides were derived from the HAS and are termed HAS-NO. The results were compared with ESR spectra of the same radicals obtained first by oxidation of Tinuvin 770 and then were doped in HPEC and related homopolymers, polyethylene (PE) and polypropylene (PP); these nitroxides are termed “spin probes.” ESR spectra indicated that HAS-NO and the spin probes reside in a range of amorphous sites differing in their dynamic properties. The relative population of the sites was explained by assuming that the crystalline domains exert a restraining effect on chains located in vicinal amorphous domains. Spatial and temporal effects of the aging process were studied by ESR and ESR imaging (ESRI) of HAS-derived nitroxide radicals, and by FTIR of films prepared by compression molding. 1D ESRI enabled the visualization of an outer region of thickness ≈100 μm that contained a lower amount of nitroxides, and is believed to result from the loss of the stabilizer by diffusion (“blooming”) and possibly also in chemical reactions during aging. Two-dimensional spectral-spatial ESRI indicated the presence of nitroxide radicals in two amorphous sites, fast and slow; the corresponding relative intensity varied with sample depth. Both ESRI and FTIR experiments suggested a faster degradation rate in HPEC containing 25% E, as compared to 10% E; moreover, a larger Tinuvin 770 content in the polymers led to less efficient stabilization. FTIR spectra indicated increased ordering of polypropylene segments in HPEC during aging at 433 K.     

FTIR and electrochemical observation of water content reduction in a thin Nafion film induced by an impregnation of metal complex cations

A thin Nafion^® ion exchange membrane was coated on a graphite electrode, and then impregnated by a metal complex couple of Os(bpy)₃^2+/3+, which served as a typical system to investigate the water content change induced by ion exchange. Cyclic voltammetry and FTIR reflection-adsorption spectroscopic methods were employed to characterize the complex loading, electrochemical behavior of the impregnates inside the film and the water content change. A direct observation of the water content reduction induced by the cation impregnation in the Nafion^® film was achieved. A monotonic relationship between the water reduction percentage and the Os(bpy)₃^2+/3+ loading was also obtained, that is, the heavier the complex loading, the more the water content will be reduced. The FTIR spectroscopic results suggested that the structure of the Nafion^® film could also be changed with water content reduction.