Full‐scale in situ bioremediation of hexachlorocyclohexane‐contaminated soil

Daramend bioremediation technology was used to treat 1100 tonnes of hexachlorocyclohexane (HCH)‐contaminated soil at a former lindane manufacturing plant. Half of the site (area A) was treated using a cycled anoxic/oxic treatment, and the other half (area B) was treated under oxic conditions. Each area was divided east to west into five zones. A control area (area C) consisted of strips of soil along the north and east edges of the site. Total HCH concentrations along a west to east gradient ranged from 22 430 to 1069 mg kg^?1 in area A and from 21 100 to 730 mg kg^?1 in area B. Concentrations in area C ranged from 52 to 1427 mg kg^?1. The soil was treated for 371 days, during which time seven anoxic/oxic cycles were completed in area A and regular tillage was performed on area B. Soil samples (one per zone) were collected after 154 and 371 days of treatment. After 371 days, total HCH concentrations were reduced in the most highly contaminated zones of areas A and B by 60% (from 22 430 to 8910 mg kg^?1) and 75% (from 21 100 to 5120 mg kg^?1), respectively. The average HCH reductions for all five zones of areas A and B were 40 and 47%, respectively, with the data indicating decreased concentrations of selected isomers in certain zones of both areas. Less substantial changes in HCH concentrations were observed in control area C. Elevated chloride ion concentrations were observed in zones that had demonstrated HCH removal. This full scale project demonstrated the potential for solid phase bioremediation treatment of soil containing high HCH concentrations. Copyright © 2005 Society of Chemical Industry     

Petroleum‐contaminated soil remediation in a new solid phase bioreactor

BACKGROUND: Oil spills are a frequent source of environmental contamination. As a consequence, remediation of soils, waters and sediments is a great challenge in this area of research. This study aims at using a new type of soil bioreactor (13 L bench‐scale and 800 L pilot‐scale) to treat tropical soil contaminated with petroleum. Additionally, it includes the evaluation of the effectiveness of two auxiliary techniques: bulking agent addition (sawdust) and biostimulation using two different nitrogen sources (sodium nitrate and urea). RESULTS: The best result in bench‐ and pilot‐scale bioreactors were reached when using urea as a nitrogen supplement and bulking agent addition. Removal of 20 to 35% of total petroleum hydrocarbon (TPH) was achieved within 42 days. The molecular fingerprinting performed with 16S‐PCR analysis associated with denaturing gradient gel electrophoresis (DGGE) was used to evaluate changes in the pattern of the bacterial community for all experimental conditions tested. The results revealed that the use of urea caused a smaller change in the dominant bacterial community structure than the treatments using nitrate, showing that this analysis can be a useful complementary tool to evaluate the impact of treatment strategies applied to hydrocarbon‐contaminated soil. CONCLUSIONS: These new solid phase bioreactors showed satisfactory results in the tropical soil bioremediation process, proving that the homogenization system interferes with crude oil biodegradation efficiency. This new technology can be used as an isolated treatment as well as in association with other classically employed bioremediation technologies. Copyright © 2010 Society of Chemical Industry     

Characterization of 4,6‐Diazido‐N‐nitro‐1,3,5‐triazine‐2‐amine

4,6‐Diazido‐N‐nitro‐1,3,5‐triazine‐2‐amine (DANT) was prepared with a 35 % yield from cyanuric chloride in a three step process. DANT was characterized by IR and NMR spectroscopy (¹H, ¹³C, ¹⁵N), single‐crystal X‐ray diffraction, and DTA. The crystal density of DANT is 1.849 g cm⁻³. The cyclization of one azido group and one nitrogen atom of the triazine group giving tetrazole was observed for DANT in a dimethyl sulfoxide solution using NMR spectroscopy. An equilibrium exists between the original DANT molecule and its cyclic form at a ratio of 7 : 3. The sensitivity of DANT to impact is between that for PETN and RDX, sensitivity to friction is between that for lead azide and PETN, and sensitivity to electric discharge is about the same as for PETN. DANT′s heat of combustion is 2060 kJ mol⁻¹.     

Synthesis and Characterization of 1‐Azido‐2‐Nitro‐2‐Azapropane and 1‐Nitrotetrazolato‐2‐Nitro‐2‐Azapropane

1‐Azido‐2‐nitro‐2‐azapropane ( 1 ) was synthesized in high yield from 1‐chloro‐2‐nitro‐2‐azapropane and sodium azide. 1‐Nitrotetrazolato‐2‐nitro‐2‐azapropane ( 2 ) was synthesized in high yield from 1‐chloro‐2‐nitro‐2‐azapropane and silver nitrotetrazolate. The highly energetic new compounds ( 1 and 2 ) were characterized using vibrational (IR and Raman) and multinuclear NMR spectroscopy (¹H, ¹³C, ¹⁴N), elemental analysis and low‐temperature single crystal X‐ray diffraction. 1‐Azido‐2‐nitro‐2‐azapropane ( 1 ) represents a covalently bound liquid energetic material which contains both a nitramine unit and an azide group in the molecule. 1‐Nitrotetrazolato‐2‐nitro‐2‐azapropane ( 2 ) is a covalently bound room‐temperature stable solid which contains a nitramine group and a nitrotetrazolate ring unit in the molecule. Compounds 1 and 2 are hydrolytically stable at ambient conditions. The impact sensitivity of compound 1 is very high (<1 J) whereas compound 2 is less sensitive (<6 J).     

Low‐Cost‐Membranen für die Vanadium‐Redox‐Flow‐Batterie

Vanadium redox‐flow batteries are a technology that can be used to store fluctuating energies from solar and wind power. In order to reduce the manufacturing costs of the batteries, e.g., cheaper raw materials can be used. By using polystyrene‐based polymers for membrane production, conductivities comparable to perfluorosulfonic acid membranes can be achieved. A way to produce these heterogeneous membranes consisting of disperse and continuous phase is shown.     

N‐Alkyl‐, 1‐C‐Alkyl‐, and 5‐C‐Alkyl‐1,5‐dideoxy‐1,5‐imino‐(l)‐ribitols as Galactosidase Inhibitors

A series of 1,5‐dideoxy‐1,5‐imino‐(l )‐ribitol (DIR) derivatives carrying alkyl or functionalized alkyl groups were prepared and investigated as glycosidase inhibitors. These compounds were designed as simplified 4‐epi‐isofagomine (4‐epi‐IFG) mimics and were expected to behave as selective inhibitors of β‐galactosidases. All compounds were indeed found to be highly selective for β‐galactosidases versus α‐glycosidases, as they generally did not inhibit coffee bean α‐galactosidase or other α‐glycosidases. Some compounds were also found to be inhibitors of almond β‐glucosidase. The N‐alkyl DIR derivatives were only modest inhibitors of bovine β‐galactosidase, with IC₅₀ values in the 30–700 μm range. Likewise, imino‐l ‐ribitol substituted at the C1 position was found to be a weak inhibitor of this enzyme. In contrast, alkyl substitution at C5 resulted in enhanced β‐galactosidase inhibitory activity by a factor of up to 1000, with at least six carbon atoms in the alkyl substituent. Remarkably, the ‘pseudo‐anomeric’ configuration in this series does not appear to play a role. Human lysosomal β‐galactosidase from leukocyte lysate was, however, poorly inhibited by all iminoribitol derivatives tested (IC₅₀ values in the 100 μm range), while 4‐epi‐IFG was a good inhibitor of this enzyme. Two compounds were evaluated as pharmacological chaperones for a GM1‐gangliosidosis cell line (R301Q mutation) and were found to enhance the mutant enzyme activity by factors up to 2.7‐fold.     

Crystallization behavior of 1,3‐dipalmitoyl‐2‐oleoyl‐glycerol and 1‐palmitoyl‐2,3‐dioleoyl‐glycerol

A model margarine was stored under a temperature fluctuation cycle of 5—20 °C until granular crystals were observed. Using information obtained from the granular crystals, the crystallization behaviors of major triacylglycerols of palm oil, 1,3‐dipalmitoyl‐2‐oleoyl‐glycerol (POP), 1‐palmitoyl‐2,3‐dioleoyl‐glycerol (POO), and their mixtures were then investigated. It was shown that in the model margarine, the POP content in the granular crystals was higher than in their surrounding materials, and the X‐ray diffraction pattern of the granular crystals revealed that they were the most stable polymorph, β. 99% pure POP, POO, and their mixtures were then stored under the above‐mentioned temperature cycle. POP was found to form the unstable polymorph, α, when cooled rapidly from the melt. Within 24 hours transformation into the γ polymorph and then into the β polymorph was observed. POO was shown to transform into the β' polymorph from α. When POP and POO were mixed, the β polymorph did not emerge, instead it was shown that POP and POO were both agglomerated in the mixtures, giving rise to the formation of granular crystals.     

Studies on ethylene‐propylene‐diene rubber modification by N‐chlorothio‐N‐butyl‐benzenesulfonamide

N‐Chlorothiosulfonamides have been used to modify ethylene‐propylene‐diene rubber (EPDM) to enhance the compatibility of EPDM in, e.g., natural rubber (NR)/butadiene rubber (BR)/EPDM blends for ozone resistance. N‐Chlorothio‐N‐butyl‐benzenesulfonamide (CTBBS) was selected as a representative for N‐chlorothiosulfonamides. In this study, we found that CTBBS behaves differently with various types of EPDM. Three types of EPDM were selected: ethylidene norbornene (ENB)‐EPDM, hexadiene (HD)‐EPDM, and dicyclopentadiene (DCPD)‐EPDM. HD‐EPDM showed the greatest effectiveness toward CTBBS‐modification. However, this EPDM is not commercially available anymore. On the opposite side, DCPD‐EPDM showed the lowest reactivity so that almost no modification could be realized. The result with ENB‐EPDM was, that upon application of CTBBS to ENB‐EPDM, gelation occurred and, therefore, a low amount of modification was achieved. With the limited modification efficiency for ENB‐EPDM, there is no significant improvement when applying the modified ENB‐EPDM into NR/BR/EPDM blends. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

One‐pot Synthesis of N‐Formyl‐O‐acyl‐ threo‐ and erythro‐DL‐β‐phenylserine Ethyl Esters and their Antiviral Properties

A series of N‐formyl‐O‐acyl‐β‐phenylserine derivatives 1b ‐ 7b were prepared by the interaction of N‐acyl‐b‐phenylserine ethyl esters 1a ‐ 7a with formic acid in presence of 1.5% HF. One‐pot acyl group N → O migration followed N‐formylation under elaborated reaction conditions. The kinetics of the reaction was investigated. The carboxylic acid moiety in the structure of β‐phenylserine had a strong influence on the reproduction of the used test‐viruses. The toxicity and antiviral activity is dependent on the diastereomeric forms of evaluated compounds.     

Synthesis and Characterization of 1‐Nitroguanyl‐3‐nitro‐5‐amino‐1,2,4‐triazole

The synthesis of 1‐nitroguanyl‐3‐nitro‐5‐amino‐1,2,4‐triazole (ANTA‐NQ) ( 1 ) with good yield and high purity is described. DSC analysis showed that the material displays good thermal stability. An X‐ray crystallographic analysis confirms the structure of this material, as well as displays intramolecular hydrogen bonding. A gas pycnometry density for this material was measured to be 1.79 g cm⁻³. The heat of formation of this material was also measured. These data, along with the molecular formula were used as inputs to calculate the detonation velocity and detonation pressure using the Cheetah thermochemical code. The sensitivity of this material towards impact, spark and friction was also measured, as well as its vacuum thermal stability. The 3‐azido derivative 2 was also prepared and its properties are described as well. The above data show that (ANTA‐NQ) may be a high performing material with low sensitivity and good thermal stability.     

Lecithin‐enhanced biotransformation of cholesterol to androsta‐1,4‐diene‐3,17‐dione and androsta‐4‐ene‐3,17‐dione

A biotransformation process using Mycobacterium sp was studied for androsta‐1, 4‐diene‐3,17‐dione (ADD) and androsta‐4‐ene‐3,17‐dione (AD) production from cholesterol. Cholesterol has a poor solubility in water (～1.8 mg dm^?3 at 25 °C), which makes it difficult to use as the substrate for biotransformation. Lecithin is a mixture of phospholipids of phosphatidylcholine (PC) and phosphatidylethanolamine (PE), which behave like surfactants and can form planar bi‐layer structures in an aqueous medium. Therefore, a small amount of lecithin (<1 g dm^?3) can be used to form stable colloids with cholesterol at a relatively high concentration (20 g dm^?3) in water. In this work, an energy density of 1000 J cm^?3 from sonication was provided to overcome the self‐association of cholesterol and to generate a stable lecithin–cholesterol suspension that could be used for enhanced biotransformation. The lecithin–cholesterol suspension was stable and could withstand typical autoclaving conditions (121 °C, 15 psig, 20 min). In contrast to conventional surfactants, such as Tween 80, that are commonly used to help solubilize cholesterol, lecithin did not change the surface tension of the aqueous solution nor cause any significant foaming problem. Lecithin was also biocompatible and showed no adverse effect on cell growth. Compared with the medium with Tween 80 as the cholesterol‐solubilizing agent, lecithin greatly improved the biotransformation process in regard to its final product yield (～59% w/w), productivity (0.127–0.346 g dm^?3 day^?1), ADD/AD ratio (6.7–8), as well as the long‐term process stability. Cells can be reused in repeated batch fermentations for up to seven consecutive batches, but then lose their bioactivity due to aging problems, possibly caused by product inhibition and nutrient depletion. © 2002 Society of Chemical Industry     

Synthesis of 5‐vinyl‐m‐ phenylene‐m′‐phenylene‐32‐ crown‐10 and its radical polymerization behavior

Synthesis of a vinyl monomer, containing a 32‐membered crown ether unit (VCE) as a pendant group, was achieved by using tetra(ethylene glycol) dichloride, resorcinol, and 3,5‐dihydroxyacetophenone as starting materials. The product was identified by means of FTIR and ¹H‐NMR. It was found that this monomer readily polymerizes by the conventional radical initiator 2,2′‐ azobisisobutyronitrile (AIBN) to afford a polymer whose number‐average molecular weight is 36 kg/mol; however, the final conversion of the polymer was < 80%. The results of the copolymerization of VCE with styrene (ST) or acrylonitrile (AN) are also discussed. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 2372–2379, 2002     

Enzymatic Synthesis of 1‐Alkyl‐2‐hydroxy‐sn‐glycero‐2,3‐cyclic‐phosphate Using a Novel Lysoplasmalogen‐Specific Phopholipase D

Many phospholipase Ds (PLDs) are known to catalyze transphosphatidylation as well as hydrolysis of phospholipids. Transphosphatidylation of lysoplasmalogen (LyPls)‐specific phospholipase D (LyPls‐PLD), which catalyzes hydrolysis of ether lysophospholipids such as LyPls and 1‐hexadecyl‐2‐hydroxy‐sn‐glycero‐3‐phosphocholine (Lyso‐PAF), still remains unclear. This study aims to reveal the transphosphatidylation activity of LyPls‐PLD, that is, the production of cyclic ether lysophospholipid. The enzymatic reaction is conducted in a buffer system, and the reaction products of a novel LyPls‐PLD from Thermocrispum sp. are investigated using mass spectrometry (MS). MS analyses demonstrate the reaction products to consist of 100% 1‐hexadecyl‐2‐hydroxy‐sn‐glycero‐2,3‐cyclic‐phosphate (cLyPA) and choline from Lyso‐PAF; however, 1‐alkenyl‐2‐hydroxy‐sn‐glycero‐2,3‐cyclic‐phosphate from 1‐O‐1′‐(Z)‐octadecenyl‐2‐hydroxy‐sn‐glycero‐3‐phosphocholine and 1‐O‐1′‐(Z)‐octadecenyl‐2‐hydroxy‐sn‐glycero‐3‐phosphoethanolamine is not produced. These results are expected to help in elucidating the catalytic mechanism of LyPls‐PLD, that is, the rate‐limiting step, and indicate LyPls‐PLD to be useful for the one‐pot synthesis of cLyPA. Practical Applications: A novel phospholipase D, LyPls‐PLD, can exclusively synthesize cLyPA from Lyso‐PAF using a one‐step enzymatic reaction without an organic solvent. cLyPA could be expected to show bioactivities similar to those of cyclic phosphatidic acid, which promotes normal cell differentiation, hyaluronic acid synthesis, antiproliferative activity in fibroblasts, and inhibitory activity toward cancer cell invasion and metastasis.     

Singlet oxygen generation and adhesive loss in stimuli‐responsive,fullerene‐polymer blends,containing polystyrene‐block‐polybutadiene‐block‐polystyrene and polystyrene‐block‐polyisoprene‐block‐polystyrene rubber‐based adhesives

The adhesive properties, as measured by bulk tack and peel strength analysis, were found to decrease in polystyrene‐block‐polybutadiene‐block‐polystyrene (SBS) and polystyrene‐block‐polyisoprene‐block‐polystyrene (SIS) PSA films containing common singlet oxygen generators, acridine, rose bengal, and C₆₀ fullerene, when irradiated with a tungsten halogen light in air. The addition of the singlet oxygen quencher, β‐carotene, to the C₆₀ fullerene samples was found to significantly deter the rate of adhesive loss in the fullerene‐SBS and ‐SIS PSA nanocomposites. The presence of oxygen was essential to the mechanism of adhesive loss and, in combination with the effects of singlet oxygen generators and a singlet oxygen scavenger, strongly supports a singlet‐oxygen mediated process. FTIR investigations of fullerene‐SBS and ‐SIS systems suggest the initial formation of peroxides which, upon further irradiation, lead to the generation of carbonyl‐containing compounds of a ketonic type after crosslinking. Rates of SBS and SIS C‐H abstraction were comparable and found to decrease when the high‐pressure, mercury xenon irradiation source was filtered to allow only light of λ > 390 nm. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

But‐2‐ene‐1,4‐diamine and But‐2‐ene‐1,4‐diol as Donors for Thermodynamically Favored Transaminase‐ and Alcohol Dehydrogenase‐Catalyzed Processes

Both cis‐ and trans‐but‐2‐ene‐1,4‐diamines have been prepared and efficiently applied as sacrificial cosubstrates in enzymatic transamination reactions. The best results were obtained with the cis‐diamine. The thermodynamic equilibrium of the stereoselective transamination process is shifted to the amine formation due to tautomerization of 5H‐pyrrole into 1H‐pyrrole, achieving high conversions (78–99%) and enantiomeric excess (up to >99%) by using a small excess of the amine donor. Furthermore, when the reaction proceeded, a strong coloration was observed due to polymerization of 1H‐pyrrole. A structurally related compound, cis‐but‐2‐ene‐1,4‐diol, has been utilized as cosubstrate in different alcohol dehydrogenase (ADH)‐mediated bioreductions. In this case, high conversions (91–99%) were observed due to a lactonization process. Both strategies are convenient from both synthetic and atom economy points of view in the production of valuable optically active products.