Facet-Dependent SERS Activity of Co3O4

Surface-enhanced Raman spectroscopy (SERS) is an ultra-sensitive and rapid technique that is able to significantly enhance the Raman signals of analytes absorbed on functional substrates by orders of magnitude. Recently, semiconductor-based SERS substrates have shown rapid progress due to their great cost-effectiveness, stability and biocompatibility. In this work, three types of faceted Co₃O₄ microcrystals with dominantly exposed {100} facets, {111} facets and co-exposed {100}-{111} facets (denoted as C-100, C-111 and C-both, respectively) are utilized as SERS substrates to detect the rhodamine 6G (R6G) molecule and nucleic acids (adenine and cytosine). C-100 exhibited the highest SERS sensitivity among these samples, and the lowest detection limits (LODs) to R6G and adenine can reach 10⁻⁷ M. First-principles density functional theory (DFT) simulations further unveiled a stronger photoinduced charge transfer (PICT) in C-100 than in C-111. This work provides new insights into the facet-dependent SERS for semiconductor materials.     

Hydrothermal synthesis of Co3O4 nanosheets and its application in photoelectrochemical water splitting

In this study, Co₃O₄ nanosheets were synthesized through hydrothermal method using cobalt nitrate hexahydrate. X-ray diffraction, diffuse reflectance spectra, Fourier transform infrared spectroscopy, energy-dispersive X-ray spectroscopy, and field emission scanning electron microscopy were applied to investigate the properties of as-synthesized samples. Ultimately, the electrochemical and photoelectrochemical properties were evaluated by Mott–Schottky analysis and measuring photoconversion efficiency of Co₃O₄ nanosheets. The results indicated that Co₃O₄ nanosheets exhibited a maximum efficiency of 0.92% for water electrolysis under simulated 1.5 global sunlight air mass, which further suggests the excellent potential of Co₃O₄ nanosheets for application in hydrogen generation through photocatalytic water splitting.     

Preparation and catalytic performance of Co3O4 catalysts for low-temperature CO oxidation

Without use of any surfactant or oxidant, a series of Co₃O₄ catalysts have been prepared from cobalt nitrate aqueous solution via a very simple liquid-precipitation method with ammonium acid carbonate followed by calcination at various temperatures. The catalytic performance of the Co₃O₄ for CO oxidation has been studied with a continuous flowing laboratory microreactor system. The results show that the CO conversion of all the samples can reach 100% at ambient temperature. The catalyst calcined at 300 °C is able to maintain its activity for CO complete oxidation more than 500 min at 25 °C and about 240 min even at −78 °C. High reaction temperature results in a high catalytic stability, while the catalytic stability decreases with further increasing the reaction temperature. Characterizations with X-ray powder diffraction and transmission electron microscopy suggest that all the samples exist as a pure Co₃O₄ phase with the spinel structure, the samples are apt to aggregate and the specific surface area gradually decreases with increasing the calcination temperature, which directly leads to the decrease of catalytic stability. Furthermore, the amount of active oxygen species measured by CO titration experiments appears to be critical for catalytic performance.     

Pd/Co3O4 catalyst for CH4 emissions abatement: study of SO2 poisoning effect

A catalyst with 0.7 wt% Pd load supported over Co₃O₄ oxide was investigated in the methane oxidation by operating under CH₄/O₂ stoichiometric conditions. The effect of the noble metal addition on the activity of bare Co₃O₄ was evaluated. Samples were characterized by BET, XRD, TPR and XPS analyses. The SO₂ poisoning of Pd catalyst and Co₃O₄ was studied by performing CH₄ oxidation tests under stoichiometric conditions in SO₂ (1 ppm or 10 ppm)_. Experiments evidenced that in our conditions the low amount of SO₂ doesn’t influence the Pd behaviour, whereas in presence of 10 ppm of SO₂ some deactivation occurs that becomes more evident above 450 °C at which the catalyst doesn’t reach 100% of methane conversion. Catalytic tests performed over Co₃O₄ and the Pd supported catalyst, after a treatment at 350 °C for 15 h in 10 ppm SO₂/He, suggest that Co₃O₄ is a sulphating support, as confirmed by XPS analysis. Therefore, an important role in lowering the sulphur poisoning of Pd may be played by Co₃O₄.     

Influence of Co3O4, Fe2O3 and SiC on microstructure and properties of glass foam from waste cathode ray tube display panel (CRT)

Abstract

In the present study, the effect of temperature and oxidising agents such as Fe₂O₃ and Co₃O₄ on physical and mechanical properties of glass foam is investigated. The glass foam is made of panel glass from dismantled cathode ray tubes and SiC as a foaming agent. In the process, powdered waste glass (mean particle size below 63 μm) in addition to 4 wt-% SiC powder (mean particle size below 45 μm) are combined with Fe₂O₃ and Co₃O₄ (0·4, 0·8 and 1·2 wt-%) have been sintered at 950 and 1050°C. The glass foamed containing 1·2 wt-% Co₃O₄ has good physical properties, with porosity more than 80% and bending strength more than 1·57±0·12 MPa. However, by adding different amounts of Fe₂O₃ in comparison with samples without iron oxide, little changes in porosity and strength are obtained.     

Reduction study of Co3O4 model catalyst by electron microscopy

Evolution of microstructure and morphology of Co₃O₄ particles in the model systems during reduction in hydrogen was studied by transmission electron microscopy methods. Based on SAED and HRTEM results we found that the degree of reduction of Co₃O₄ strongly depends on the particle size and morphology, which are determined by the pretreatment conditions. Preferential epitaxial growth of CoO and Co phases on Co₃O₄ during reduction was deduced from HRTEM images.     

Origin of Capacity Fading in Nano-Sized Co3O4 Electrodes: Electrochemical Impedance Spectroscopy Study

Transition metal oxides have been suggested as innovative, high-energy electrode materials for lithium-ion batteries because their electrochemical conversion reactions can transfer two to six electrons. However, nano-sized transition metal oxides, especially Co₃O₄, exhibit drastic capacity decay during discharge/charge cycling, which hinders their practical use in lithium-ion batteries. Herein, we prepared nano-sized Co₃O₄ with high crystallinity using a simple citrate-gel method and used electrochemical impedance spectroscopy method to examine the origin for the drastic capacity fading observed in the nano-sized Co₃O₄ anode system. During cycling, AC impedance responses were collected at the first discharged state and at every subsequent tenth discharged state until the 100th cycle. By examining the separable relaxation time of each electrochemical reaction and the goodness-of-fit results, a direct relation between the charge transfer process and cycling performance was clearly observed.     

Synthesis of Co3O4 Nanoparticles-Decorated Bi12O17Cl2 Hierarchical Microspheres for Enhanced Photocatalytic Degradation of RhB and BPA

Three-dimensional (3D) hierarchical microspheres of Bi₁₂O₁₇Cl₂ (BOC) were prepared via a facile solvothermal method using a binary solvent for the photocatalytic degradation of Rhodamine-B (RhB) and Bisphenol-A (BPA). Co₃O₄ nanoparticles (NPs)-decorated BOC (Co₃O₄/BOC) heterostructures were synthesized to further enhance their photocatalytic performance. The microstructural, morphological, and compositional characterization showed that the BOC microspheres are composed of thin (~20 nm thick) nanosheets with a 3D hierarchical morphology and a high surface area. Compared to the pure BOC photocatalyst, the 20-Co₃O₄/BOC heterostructure showed enhanced degradation efficiency of RhB (97.4%) and BPA (88.4%). The radical trapping experiments confirmed that superoxide (^•O₂⁻) radicals played a primary role in the photocatalytic degradation of RhB and BPA. The enhanced photocatalytic performances of the hierarchical Co₃O₄/BOC heterostructure are attributable to the synergetic effects of the highly specific surface area, the extension of light absorption to the more visible light region, and the suppression of photoexcited electron-hole recombination. Our developed nanocomposites are beneficial for the construction of other bismuth-based compounds and their heterostructure for use in high-performance photocatalytic applications.     

Phase transformation in CeO2–Co3O4 binary oxide under reduction and calcination pretreatments

The CeO₂–Co₃O₄ binary oxide was prepared by impregnation of the high surface area Co₃O₄ support (S.A. = 100m² g⁻¹) with cerium nitrate (20 wt% cerium loading on Co₃O₄). Pretreatment of CeO₂–Co₃O₄ binary oxide was divided both methods: reduction (under 200 and 400 °C, assigned as CeO₂–Co₃O₄–R200 and CeO₂–Co₃O₄–R400 and calcination (under 350 and 550 °C, assigned as CeO₂–Co₃O₄–C350 and CeO₂–Co₃O₄–C550). The binary oxides were investigated by means of X-ray diffraction (XRD), nitrogen adsorption at −196 °C, infrared (IR), transmission electron microscopy (TEM), diffuse reflectance spectroscopy (DRS) and temperature programmed reduction (TPR). The results showed that the binary oxides pretreatment under low-temperatures possessed larger surface area. The cobalt phase of binary oxides also was transferred upon the treating temperature, i.e., the CeO₂–Co₃O₄–R200 binary oxide exhibited higher surface area (S.A. = 109m² g⁻¹) and the main phase was CeO₂,Co₃O₄ and CoO. While, the CeO₂–Co₃O₄–R400 binary oxide exhibited lower surface area (S.A. = 40m² g⁻¹) and the main phase was CeO₂, CoO and Co. Apparently, the optimized pretreatment of CeO₂–Co₃O₄ binary oxide can control both the phases and surface area.     

Engineering oxygen vacancy-rich Co3O4 nanowire as high-efficiency and durable bifunctional electrocatalyst for overall alkaline water splitting

A novel kind of vacancy-rich nanowire arrays were prepared by reducing rough Co₃O₄ nanowires with NaBH₄ solution on 3D nickel foam at room temperature for overall water splitting. Co₃O₄/NF treated by NaBH₄ for 10 min was highly active for oxygen evolution reaction (OER) and simultaneously efficient for hydrogen evolution reaction (HER) with the need of the overpotentials of 240 and 132 mV to drive 10 mA·cm^-2 in alkaline media, respectively. Furthermore, the electrocatalysts as both cathode and anode in a two-electrode system presented excellent durability for over 60 h at 10 mA·cm^-2, maintaining the cell voltage of merely 1.63 V. This work provides new methods and ideas for the preparation of transition metal oxide bifunctional electrocatalysts rich in oxygen vacancies.     

富氧空位Co3O4纳米线的制备及其电解水性能研究

在室温下利用NaBH₄溶液还原Co₃O₄纳米线获得富含氧空位（V_O）的三维自支撑纳米线阵列用作全水解电催化剂,其中NaBH₄处理10 min的Co₃O₄/NF在碱性介质中对析氧反应（OER）和析氢反应（HER）表现出很高的活性,在10 mA·cm^-2电流密度下分别仅需240和132 mV的过电位。V_O-Co₃O₄/NF同时作为阴极和阳极电催化剂时,在10 mA·cm^-2下电解水槽电压仅为1.63 V,其耐久性可达60 h以上。该工作为富含氧空位结构的过渡金属氧化物双功能电催化剂的制备提供了新的方法和思路。     

Synthesis and magnetic properties of nanoporous Co3O4 nanoflowers

Nanoporous Co₃O₄ hierarchical nanoflowers have been prepared through sequential process of a hydrothermal reaction and heat treatment. These nanoflowers consisting of a great deal of Co₃O₄ nanofibers have bimodal pore structures and Brunauer–Emmett–Teller surface area of 34.61 m²/g. The temperature dependence curves of magnetization in zero-field-cooled and field-cooled exhibit main antiferromagnet and weak ferromagnet of Co₃O₄ nanoflowers at blocking temperature of 34 K, respectively. In addition, analysis of their optic properties obviously indicates red shift of absorption peaks, exhibiting quantum-confined effect and traits of semiconductor.     

Growth kinetics of nanograins in Co3O4 fibers

The growth kinetics of nanograins in Co₃O₄ nanofibers has been investigated. Individual fibers were made up of nanograins. The nanograins were observed to coalesce and grow at the expense of the smaller ones, similar to the phenomenon observed in the sintering process of bulk ceramics. The activation energy and the growth kinetics of nanograins were estimated, showing the dominant growth mechanism of nanograins to be likely related to a lattice diffusion process.     

Co3O4 Nanoparticles Uniformly Dispersed in Rational Porous Carbon Nano-Boxes for Significantly Enhanced Electrocatalytic Detection of H2O2 Released from Living Cells

A facile and ingenious method to chemical etching-coordinating a metal-organic framework (MOF) followed by an annealing treatment was proposed to prepare Co₃O₄ nanoparticles uniformly dispersed in rational porous carbon nano-boxes (Co₃O₄@CNBs), which was further used to detect H₂O₂ released from living cells. The Co₃O₄@CNBs H₂O₂ sensor delivers much higher sensitivity than non-etching/coordinating Co₃O₄, offering a limit of detection of 2.32 nM. The wide working range covers 10 nM-359 μM H₂O₂, while possessing good selectivity and excellent reproducibility. Moreover, this biosensor was used to successfully real-time detect H₂O₂ released from living cells, including both healthy and tumor cells. The excellent performance holds great promise for Co₃O₄@CNBs’s applications in electrochemical biomimetic sensing, particularly real-time monitor H₂O₂ released from living cells.     

Rapid synthesis of nanocrystalline Co3O4 by a microwave-assisted combustion method

A facile and rapid microwave-assisted combustion method was developed to synthesize the nanocrystalline Co₃O₄. The study suggested that application of microwave heating to produce the homogeneous porous Co₃O₄ was achieved in a few minutes. The structure and morphology of the as-prepared nanocrystalline Co₃O₄ were investigated by means of X-ray diffraction (XRD), Fourier transform infrared spectra (FTIR), Raman spectra, UV-vis absorbance spectra and scanning electron microscopy (SEM). The XRD, FTIR and Raman spectra confirmed the formation of spinel structural Co₃O₄, and the SEM results indicated the porous surface characteristic of the products. Magnetic measurement was carried out using a vibrating sample magnetometer (VSM). The field dependence of the magnetization at room temperature showed a tiny hysteresis loop with a coercivity of 56.7 Oe.     

Effects of Nickel-Loading Method on the Water-Splitting Activity of a Layered NiO x /Sr4Ti3O10 Photocatalyst

Sr₄Ti₃O₁₀, which is known to have a Ruddlesden-Popper phase as a layered perovskite-type oxide, showed activity leading to the decomposition of pure water into H₂ and O₂ without any co-catalyst, when irradiated with light under 395 nm. When NiO _x was loaded onto Sr₄Ti₃O₁₀ both by the impregnation (I) method and the vapor deposition (VD) method, this photocatalytic activity drastically increased. Nickel acetylacetonate, when used with the VD method, was found to give rise to more efficient photocatalytic activity than that obtained using nickel nitrate with the impregnation method.     

Nano ZrP2O7 Catalyzed Multicomponent Reaction for an Easy Access of 4H-pyrans and 1,4-dihydropyridines

ZrP₂O₇ nanoparticle catalyzed one-pot synthesis of 4H-pyran scaffolds installing a one-pot three-component coupling reaction of an aldehyde, malononitrile, and ethyl acetoacetate. Also the synthesis of 1,4-dihydropyridines was investigated by using aldehydes, ethyl acetoacetate and ammonium acetate as utilizing nano structured ZrP₂O₇ as an efficient catalyst in ethanol. The attractive features of this process are mild reaction conditions, reusability of the catalyst, short reaction times, easy isolation of the products, and excellent yields.     

Preparation and characterisation of closed-pore Al2O3-MgAl2O4 refractory aggregate utilising superplasticity

ABSTRACT

A novel high closed porosity Al₂O₃-MgAl₂O₄ refractory aggregate has been successfully fabricated by utilising superplasticity with Al₂O₃ and MgO as raw materials, SiC as high temperature pore-forming agent. The effects of the addition amounts of MgO and SiC on porosity, sintering behaviours, phase composition, pore size distribution and microstructure of the refractory aggregate have been investigated. The formation mechanism of the closed pore in the refractory aggregate has been discussed. The results showed that the MgO can improve the superplastic deformation ability of Al₂O₃-based ceramic at high temperature. With the content of MgO and SiC increased, the closed porosity and the pore size increased. The oxidation of SiC improved the sinterability of materials at the initial stage of sintering, and then the released gases due to the further oxidation of SiC promoted the formation of closed pores by motivating the superplastic deformation ability of Al₂O₃-based materials.     

Morphology effects of Co3O4 on the catalytic activity of Au/Co3O4 catalysts for complete oxidation of trace ethylene

Au/Co₃O₄ catalysts with different morphologies (nanorods, nanopolyhedra and nanocubes) were successfully synthesized and evaluated for ethylene complete oxidation. We found that support morphology has a significant effect on catalytic activity, which is related to the exposed planes of different morphological Co₃O₄. HRTEM revealed the Co₃O₄-nanorods predominantly exposes {110} planes, while the dominant exposed planes of Co₃O₄-nanopolyhedra and -nanocubes are {011} and {001} planes, respectively. Compared with {011} and {001} planes, {110} planes exhibit the maximum amount of oxygen vacancies, which play a major role in ethylene oxidation. Therefore, Au/Co₃O₄-nanorods exhibits extraordinary catalytic activity, yielding 93.7% ethylene conversion at 0 °C.     

Highly hydrogen-deficient hydrocarbon species for the CO2-reforming of CH4 on Co/Al2O3 catalyst

The dynamics of produced CO and H₂, measured by pulse surface reaction rate analysis (PSRA), revealed that the intermediate hydrocarbon species for the CO₂-reforming of CH₄ was highly hydrogen-deficient (CH_0.75) on supported Co/Al₂O₃ catalyst. It was also found that the species was more reactive than the less hydrogen-deficient one (CH_2.4) on Ni/Al₂O₃ catalyst.