共查询到19条相似文献,搜索用时 390 毫秒
1.
本文以骨质瓷显微结构为基础,运用导出的热稳定性判据,结合生产工艺,分析论证了影响骨质瓷抗热震性能的主要因素,提出了改善骨质瓷热稳定性、提高产品质量的有效方法。 相似文献
2.
骨质瓷作为高级日用细瓷之一,以其高白度、高透光度和高强度等优良性能在国内外市场深受青睐。但骨质瓷的热稳定性远不如传统的K2O-Al2O3-SiO2系统瓷及滑石质日用细瓷。通常日用细瓷对热稳定性要求是制品水中交换温差达到200℃以上;而目前我国实际生产的骨质瓷制品水中交换温差多在140℃以下,即便是优质的骨质瓷水中交换的温差也只是达到160℃。国内外对提高骨质瓷热稳定性进行了大量的研究,笔者在此基础上探讨釉料组成对骨质瓷热稳定性的影响。笔者就釉料的作用与特点进行了简单介绍,阐述了釉料配置应遵循的原则以及各氧化物在釉料中的作用。其着重计算了基础釉料配方以及调整组成后的各组配方的膨胀系数,及其与坯体膨胀系数的差值,介绍了釉浆制备及施釉工艺;着重叙述了各组配方烧成曲线及温度的确定,以及测定各组烧成试样的热稳定性、白度、抗折强度及坯釉适应性等性能的实验过程和实验结果,并进行简要的分析。最后,通过总实验结果的分析与讨论,得出结论,即通过改变釉料组成提高热稳定性是可行的。 相似文献
3.
4.
5.
《中国陶瓷》2016,(10)
为使骨质瓷具有释放负离子的功能,在传统骨质瓷釉料配方的基础上,添加具有释放负离子功能的负离子材料。将负离子粉和稀土类原料分别加入骨质瓷釉料中,研究负离子材料对骨质瓷性能影响规律,确定合适的负离子材料的种类及添加量。结果表明:在骨质瓷基础釉料配方中,引入负离子粉较稀土类氧化物,样品对蒸馏水pH值影响最大,负离子释放效果最为明显。随着负离子粉添加量的增多,骨质瓷样品负离子释放量增多,综合考虑负离子释放效果、产品性能及产品成本,负离子粉添加量控制在3~4%为合适。负离子粉影响骨质瓷白度,引入越多白度降低越明显,通过钴蓝调色,能使白度达到81.09%,使其达到国家规定的骨质瓷白度要求。加入负离子粉后,样品的热稳定性满足国标规定的骨质瓷性能要求,但对釉层的显微结构产生了一定的影响,需要适当微调基础釉料配方,合理控制烧成制度,保证釉面质量。 相似文献
6.
7.
8.
9.
10.
本文详细阐述了用江西优质瓷石替代部分骨灰生产新骨质瓷的必要性和可行性。确定了新骨质瓷的最佳坯釉料配方。研制出了既具有传统骨质瓷的性能特征 ,又易于实现生产工艺控制 ,而且成本较低的新骨质瓷制品。 相似文献
11.
以热膨胀仪判定建窑黑瓷烧成温度的研究为例,综合运用多种测试方法对建窑黑瓷标本进行了系统研究,探讨如何从建窑黑瓷胎体重烧热膨胀曲线中筛选有效转折点的问题及其转折点的形成原因。研究表明:(1)建窑黑瓷胎体重烧热膨胀曲线上有三个转折点,分别为收缩转折点、膨胀转折点和急剧收缩点。其中第一个收缩转折点是判定其古代烧成温度的关键点。(2)建窑黑瓷胎体重烧热膨胀曲线上膨胀转折点和急剧收缩点的形成皆与其胎体中大量Fe_2O_3在高温下发生分解反应有关。该研究不仅为热膨胀仪测定建窑黑瓷烧成温度的应用研究提供判定依据,也将为科学认识古陶瓷胎体重烧热膨胀曲线上多个转折点的形成机理提供数据支持。 相似文献
12.
详细分析了金属基烤瓷牙冠残余应力产生的原因,认为金属与烤瓷热膨胀系数不匹配,制备工艺不合理以及金属与烤瓷结合欠佳等是产生残余应力和导致烤瓷破坏的主要原因,并对如何控制残余应力,关少烤瓷开裂和肃落进行了论述。 相似文献
13.
Quantitative X-ray Diffraction Determination of Leucite Thermal instability in Dental Porcelain 总被引:3,自引:0,他引:3
Alterations in the leucite content of dental porcelain during thermal treatments required for fabrication of dental restorations produce proportional changes in the thermal expansion coefficient. Such thermal expansion changes can create a thermal expansion mismatch with the metal to which it is fused and can result in the fracture of the porcelain during fabrication. The purpose of this study was to determine whether changes in the leucite content of a dental porcelain resulting from thermal treatments could be detected via quantitative X-ray diffraction. The thermal treatments investigated were isothermal soaks for 0, 4, 8, and 16 min at 500° and 750°C, or multiple firings of 1, 2, 4, 8, and 16 times. Quantitative X-ray diffraction was performed on the heat-treated porcelain specimens, and the data were subjected to linear regression analysis. A significant negative correlation ( r =−0.92, p < 0.001) was found between leucite volume fraction and the number of firings. A significant positive correlation ( r = 0.88, p < 0.001) was obtained between leucite volume fraction and duration of heat soak at 750°C. No relationship was found ( r = 0.40, p = 0.127) between the leucite content and the duration of the heat soak at 500°C. Such leucite variations could be responsible for changes in porcelain—metal thermal compatibility. 相似文献
14.
本工作分别测定了添加ZrO2粉和锆英石的骨灰瓷的物理性能和显微结构,对锆对骨灰瓷的作用机理进行了讨论,得到锆可以增强骨灰瓷的力学性能和提高其热稳定性的结果。 相似文献
15.
Dapeng Xiu Guochen Zhao Jixue Zhou Suqing Zhang 《International Journal of Applied Ceramic Technology》2019,16(6):2385-2392
In this study, a new percentage named “A value” was proposed, which was the key to evaluate whether solar thermal systems could be put into massive industrial application. A novel type of solar energy collector—black porcelain solar plate was developed. The solar absorptance of black coating was as high as 0.95 and did not decay against time. The performance of black porcelain solar roof systems (BPRSs) was investigated, which could be integrated with buildings and had the A value 2.49-2.67 times higher than traditional solar thermal systems. The experimental results showed that the thermal efficiencies of BPRSs were more than 50%, which was about 20% higher than traditional solar thermal systems. BPRSs were widely known as low cost, long lifetime, no corrosion, and no aging. They could provide many applications for civil buildings, such as hot water of four seasons, summer air conditioning and winter heating. Once applied widely, solar energy collected by black porcelain solar plates might prospectively be the major source of human energy demand. 相似文献
16.
17.
高铝质强化日用瓷的研制 总被引:4,自引:1,他引:3
通过引入工业氧化铝及复合熔剂,在接近普通硬质瓷的烧成温度下,生产出抗折强度为140MPa、釉面硬度达7373MPa和高热稳定性的刚玉质强化瓷。 相似文献
18.
19.
陶瓷窑炉热工理论研究进展的回顾与瞻望 总被引:4,自引:0,他引:4
在回顾20世纪下半叶热工技术的三满面春风突破和陶瓷烧成窑炉窑型发展的基础上,着重对近20年来陶瓷窑炉热工理论研究的进展进行了总结,将其归纳为14个方面,分别作了介绍和评述,最后,作者对21世纪初此方面理论研究的方向和课题做了前瞻性的展望。 相似文献