Compounds WAl<Subscript>4</Subscript>, WAl<Subscript>3</Subscript>, W<Subscript>3</Subscript>Al<Subscript>7</Subscript>, and WAl<Subscript>2</Subscript> and Al-W-N combustion products

X-ray diffraction data are presented for combustion products in the Al-W-N system. New, nonequilibrium intermetallic compounds have been identified, their diffraction patterns have been indexed, and their unit-cell parameters have been determined. The phases α-and β-WAl₄ are shown to exist in three isomorphous forms, differing in unit-cell centering. The phases α′-, α″-, and α?-WAl₄ are monoclinic, with a ₀ = 5.272 Å, b ₀ = 17.770 Å, c ₀ = 5.218 Å, β = 100.10°; point groups C12/c1, A12/n1, I12/a1, respectively. The phases β′-, β″-, and β?-WAl₄ are monoclinic, with a ₀ = 5.465 Å, b ₀ = 12.814 Å, c ₀ = 5.428 Å, β = 105.92°; point groups A112/m, B112/m, I112/m, respectively. The compounds WAl₂ and W₃Al₇, identified each in two isomorphous forms, differ in cell metrics (doubling) but possess the same point group: P222. WAl ₂ ^′ : orthorhombic, a ₀ = 5.793 Å, b ₀ = 3.740 Å, c ₀ = 6.852 Å. WAl ₂ ^″ : orthorhombic, a ₀ = 11.586 Å, b ₀ = 3.740 Å, c ₀ = 6.852 Å. W₃Al ₇ ^′ : orthorhombic, Pmm2, a ₀ = 6.225 Å, b ₀ = 4.806 Å, c ₀ = 4.437 Å. W₃Al ₇ ^″ : orthorhombic, Pmm2, a ₀ = 12.500 Å, b ₀ = 4.806 Å, c ₀ = 8.874 Å. The new phase WAl₃: triclinic, P1, a ₀ = 8.642 Å, b ₀ = 10.872 Å, c ₀ = 5.478 Å, α = 104.02°, β = 64.90°, γ = 107.15°.     

Ferromagnetism in Fe-doped BaTiO<Subscript>3</Subscript> Ceramics

Polycrystalline samples of BaTi_1?xFe_xO₃ (x = 0.00–0.30) are prepared by solid-state reaction method and their structural and magnetic properties are studied. Detailed investigation of XRD patterns reveal the coexistence of tetragonal (space group P4mm) and hexagonal phases (space group P6 ₃/mmc) for x ≥ 0.1. Magnetic measurements reveal room-temperature ferromagnetism in x = 0.15–0.3 samples, and their ferromagnetic transition temperature increases from 397 K for x = 0.15 to 464 K for x = 0.3. The initial magnetization curves for x = 0.15–0.3 are analyzed in terms of bound magnetic polaron (BMP) model. The analysis of susceptibility data in the paramagnetic region by Curie-Weiss law confirms the ferromagnetic transition for x ≥ 0.15 and the effective magnetic moment systematically increases with increase in Fe concentration.     

Synthesis and x-ray diffraction study of solid solutions in the Zn<Subscript>2</Subscript>SnO<Subscript>4</Subscript>-Zn<Subscript>2</Subscript>TiO<Subscript>4</Subscript>-Zn<Subscript>2</Subscript>ZrO<Subscript>4</Subscript> system

The multicomponent refractory oxide system Zn₂(Ti_aSn_b)_{1 ? x} Zr_xO₄ (a + b = 1; a: b = 1: 5, 1: 4, 1: 3, 1: 2, 1: 1, 1: 0, 2: 1, 3: 1, 4: 1; x = 0?1.0; Δx = 0.05) has been studied by x-ray diffraction, using samples prepared by melting appropriate oxide mixtures in a low-temperature hydrogen-oxygen plasma. Two phases, both with wide homogeneity ranges, have been identified: α-phase, with a cubic inverse spinel structure, and β-phase, with a tetragonal spinel structure. The phase boundaries in the system have been determined. Structural data are presented for about 100 solid solutions of different compositions.     

Crystallization from high-temperature solutions in the K<Subscript>2</Subscript>O-P<Subscript>2</Subscript>O<Subscript>5</Subscript>-V<Subscript>2</Subscript>O<Subscript>5</Subscript>-Bi<Subscript>2</Subscript>O<Subscript>3</Subscript> system

We have studied general trends of crystallization from high-temperature solutions in the K₂O-P₂O₅-V₂O₅-Bi₂O₃ system at P/V = 0.5?2.0, K/(P + V) = 0.7?1.4, and Bi₂O₃ contents from 25 to 50 wt % and identified the stability regions of BiPO₄, K₃Bi₅(PO₄)₆, K₂Bi₃O(PO₄)₃, and K₃Bi₂(PO₄)_{3 ? x} (VO₄) _x (x = 0?3) solid solutions. The synthesized compounds have been characterized by X-ray powder diffraction and IR spectroscopy, and the structure of two solid solutions has been determined by single-crystal X-ray diffraction (sp. gr. C ₂/c): K₃Bi₂(PO₄)₂(VO₄), a = 13.8857(8), b = 13.5432(5), c = 6.8679(4) Å, β = 114.031(7)°; K₃Bi₂(PO₄)_1.25(VO₄)_1.75, a = 13.907(4), b = 13.615(2), c = 6.956(2) Å, β = 113.52(4)°.     

Magnetization reversal and tunable exchange bias behavior in Mn-substituted NiCr<Subscript>2</Subscript>O<Subscript>4</Subscript>

Single phase samples of Ni(Cr_1?xMn _x )₂O₄ (x = 0–0.50) were synthesized by using sol–gel route. Investigation of structural, magnetic, exchange bias and magnetization reversal properties was carried out in the bulk samples of Ni(Cr_1?xMn _x )₂O₄. Rietveld refinement of the X-ray diffraction patterns recorded at room temperature reveals the tetragonal structure for x = 0 sample with I4₁/amd space group and cubic structure for x ≥ 0.05 samples with \( {\text{Fd}\bar{3}\text{m}} \) space group. Magnetization measurements show that all samples exhibit ferrimagnetic behavior, and the transition temperature (T_C) is found to increase from 73 K for x = 0 to 138 K for x = 0.50. Mn substitution induces magnetization reversal behavior especially for 30 at% of Mn in NiCr₂O₄ system with a magnetic compensation temperature of 45 K. This magnetization reversal is explained in terms of different site occupation of Mn ions and the different temperature dependence of the magnetic moments of different sublattices. Study of exchange bias behavior in x = 0.10 and 0.30 samples reveals that they exhibit negative and tunable positive and negative exchange bias behavior, respectively. The magnitudes of maximum exchange bias field of these samples are found to be 640 and 5306 Oe, respectively. Exchange bias in x = 0.10 sample originates from the anisotropic exchange interaction between the ferrimagnetic and the antiferromagnetic components of magnetic moment. The tunable exchange bias behavior in x = 0.30 sample is explained in terms of change in domination of one sublattice moment over the other as the temperature is varied.     

High-temperature crystal chemistry of Na<Subscript>6</Subscript>(UO<Subscript>2</Subscript>)<Subscript>2</Subscript>O(MoO<Subscript>4</Subscript>)<Subscript>4</Subscript>

Thermal deformations of Na₆(UO₂)₂O(MoO₄)₄ were studied by high-temperature powder X-ray diffraction. The compound crystallizes in the triclinic system, space group Р\(\bar 1\), a = 7.636(7), b = 8.163(6), c = 8.746(4) Å, α = 72.32(9)°, β = 79.36(4)°, γ = 65.79(5)°, V = 472.74(4) ų. It is stable in the temperature interval 20–700°С. The thermal expansion coefficients (TECs) are α₁₁ = 25.5 × 10^–6, α₂₂ = 7.8 × 10^–6, and α₃₃ = 1.1 × 10^–6 (°C)^–1. The orientation of the TEC pattern relative to the crystallographic axes is a₃₃^Z = 45°, a₃₃^X = 122°, a₂₂^Z = 59°, and a₂₂^X = 66°. The anisotropy of the thermal expansion is due to specific features of the crystal structure of the compound.     

Preparation and electrical properties of Pb(Mg<Subscript>1/3</Subscript>Nb<Subscript>2/3</Subscript>)O<Subscript>3</Subscript>-PbTiO<Subscript>3</Subscript> solid solutions

Ceramic samples of lead magnesium niobate (PMN) and (1 ? x)Pb(Mg_1/3Nb_2/3)O₃?xPbTiO₃ (PMN-PT) solid solutions with x = 0, 0.05, 0.10, and 0.30 have been prepared by solid-state reactions, and their structural, electrical, and piezoelectric properties have been studied using x-ray diffraction, Rietveld profile analysis, impedance spectroscopy, and the resonance/antiresonance method. The results indicate that the use of nonstoichiometric columbite niobates enables the synthesis of phase-pure PMN and PMN-PT.     

Structural and dielectric properties of PbMg<Subscript>1/3</Subscript>Nb<Subscript>2/3</Subscript>O<Subscript>3</Subscript>-PbZrO<Subscript>3</Subscript> solid solutions synthesized at high pressures and temperatures

(1 ? x)PbMg_1/3Nb_2/3O₃ · xPbZrO₃ (1 ? x)PMN · xPZ) solid solutions have been synthesized at a pressure of 5 GPa and temperatures from 1300 to 1700 K, and their structural and dielectric properties have been studied. The composition dependences of the average unit-cell parameter and dielectric permittivity for the solid solutions indicate that the PMN-PZ system has a morphotropic phase boundary near x = 0.65. The solid solutions have a cubic structure for x < 0.65, a rhombohedral structure in the range 0.65 < x < 0.9, and an orthorhombic structure (similar to that of PbZrO₃) for x > 0.9. The temperature and frequency dependences of dielectric permittivity suggest that the (1 ? x)PMN · xPZ samples with x < 0.65 consist of two ferroelectric phases: a relaxor with antipolar dipole order and a normal ferroelectric with a diffuse phase transition. The effect of annealing temperature on the ferroelectric state of the samples with x < 0.65 is examined. In the composition range 0.65 < x < 0.9, the samples have normal ferroelectric properties, independent of annealing temperature.     

Inducement of Itinerant Electron Transport in Charge-Ordered Pr<Subscript>0.6</Subscript>Ca<Subscript>0.4</Subscript>MnO<Subscript>3</Subscript> by Ba Doping

The effects of Ba ²⁺ doping on the electrical and magnetic properties of charge-ordered Pr_0.6Ca_0.4MnO₃ were investigated through electrical resistivity and AC susceptibility measurements. X-ray diffraction data analysis showed an increase in unit cell volume with increasing Ba ²⁺ content indicating the possibility of substituting Ba ²⁺ for the Ca-site. Electrical resistivity measurements showed insulating behavior and a resistivity anomaly at around 220 K. This anomaly is attributed to the existence of charge ordering transition temperature, \(T^{\mathrm {R}}_{\text {CO}}\) for the x = 0 sample. The Ba-substituted samples exhibited metallic to insulator transition (MI) behavior, with transition temperature, T _MI, increasing from ～98 K (x = 0.1) to ～122 K (x = 0.3). AC susceptibility measurements showed ferromagnetic to paramagnetic (FM-PM) transition for Ba-substituted samples with FM-PM transition temperature, T _c, increasing from ～121 K (x = 0.1) to ～170 K (x = 0.3), while for x = 0, an antiferromagnetic to paramagnetic transition behavior with transition temperature, T _N, ～170 K was observed. In addition, inverse susceptibility versus T plot showed a deviation from the Curie–Weiss behavior above T _c, indicating the existence of the Griffiths phase with deviation temperature, T _G, increasing from 160 K (x = 0.1) to 206 K (x = 0.3). Magnetoresistance, MR, behavior indicates intrinsic MR mechanism for x = 0.1 which changed to extrinsic MR for x > 0.2 as a result of Ba substitution. The weakening of charge ordering and inducement of ferromagnetic metallic (FMM) state as well as increase in both T _c and T _MI are suggested to be related to the increase of tolerance factor, τ, and increase of e _g ?electron bandwidth as average ionic radius at A-site, <r _A> increased with Ba substitution. The substitution may have reduced MnO₆ octahedral distortion and changed the Mn–O–Mn angle which, in turn, promotes itinerancy of charge carrier and enhanced double exchange mechanism. On the other hand, increase in A-site disorder, which is indicated by the increase in σ ² is suggested to be responsible for the widening of the difference between T _c and T _MI.     

Phases and morphotropic regions in the PbNb<Subscript>2/3</Subscript> Mg<Subscript>1/3</Subscript>O<Subscript>3</Subscript>-PbTiO<Subscript>3</Subscript> system

Ceramic samples of solid solutions (1 ? x) PbNb_2/3Mg_1/3O₃ · xPbTiO₃ (0 ≤ x ≤ 1.0, Δx = 0.0025–0.05) are prepared by the columbite method. A detailed x?T phase diagram of the system is constructed (isothermal join at 25°C), and dielectric, piezoelectric, and elastic properties are investigated. It is established that the region of the morphotropic phase transition is positioned in the range 0.28 < x ≤ 0.43 and consists of a series of narrower regions. Inside one phase (cubic, rhombohedral, tetragonal), regions are found in which a qualitative and quantitative difference in structural and electrical parameters is observed. An interpretation of the observed effects in the context of the defect structure of the objects is suggested.     

Crystal structures of Ln<Subscript>2</Subscript>TiO<Subscript>5</Subscript> (Ln = Gd,Dy) polymorphs

Single crystals of four Ln₂TiO₅ polymorphs have been grown, and their structures have been determined: orthorhombic (Gd₂TiO₅, a = 10.460(5), b = 11.317(6), c = 3.750(3) Å, Pnam, Z = 4), hexagonal (Gd_1.8Lu_0.2TiO₅, a = 3.663(3), c = 11.98(1) Å, P6₃/mmc, Z = 1.2), cubic (Dy₂TiO₅, a = 10.28(1) Å, Fd3m, Z = 10.4), and monoclinic (Dy₂TiO₅, a = 10.33(1), b = 3.653(5), c = 7.306(6) Å, β = 90.00(7)°, B2/m, Z = 2.4). The last polymorph has been identified for the first time.     

Influence of graded interfaces on the exciton energy of type-I and type-II Si/Si<Subscript>1-<Emphasis Type="Italic">x</Emphasis></Subscript> Ge<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript> quantum wires

The exciton properties of Si/Si _1-x Ge _x cylindrical quantum wires (QWRs) are calculated using the variational method and taking into account the existence of an interface layer between the materials. We consider two possibilities for the conduction band lineup, type-I and type-II. Our numerical results show that an interfacial fluctuation of 15Å in a Si _0.85 Ge _0.15 (Si_0.70Ge_0.30) type-I (type-II) wire of 50Å wire radius leads to an exciton energy blue shift of the order of 10 (10) meV.     

Effects of Iron Contents on the Vortex State in Fe<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>Se<Subscript>0.5</Subscript>Te<Subscript>0.5</Subscript>

We investigate the effects of iron content on the upper critical field (H _c2) and the activation energy U(T) in thermally activated flux flow in Fe _x Se_0.5Te_0.5 near the superconducting transition temperature T _c . The variations in H _c2(T) with temperature are analyzed using Ginzburg-Landau (GL), Werthamer-Helfand-Hohenberg (WHH) models along with the empirical relation (ER). The obtained values of H _c2(0) depend strongly on the model and the criteria used to determine the transition temperature. However, the general trend is that that H _c2(0) increases with the increasing Fe content. The activation energy U(T) is maximum for x =? 1 and rapidly suppressed by excess or deficiency of iron. The low values of U(T) (～10 meV) reflect the low vortex-pinning nature (due to defects, vacancies, etc.) in the Fe _x Se_0.5Te_0.5 superconductor.     

Synthesis and Superconductivity of Layered Compounds with Orthogonal [Zr<Subscript>2</Subscript>N<Subscript>2</Subscript>] Network

Layered α-form ZrNX (X: Cl and Br) compounds with high quality were prepared by chemical vapor transport. The intercalation of alkali metal A (A: Li, Na, K, Rb) was carried out to realize electron doping into the orthogonal [Zr₂N₂] layers. The Rietveld refinement analysis reveals that the [Zr₂N₂] crystalline layers in the intercalation compounds shift mutually in the ab plane when compared with the hosts. Magnetic measurements show that the intercalation compounds A _x ZrNX are changed into superconductors with transition temperature T _c of up to 12 K. Upon the cointercalation of solvent molecules such as THF, T _c decreases to as low as 6.1 K with increasing the interlayer spacing d up to 14 Å, which is similar to the d dependence of T _c recently found in electron-doped α-form TiNX series. We also succeeded in synthesizing another new polymorph of α-Zr₂N₂S by the topochemical reaction between α-form ZrNX and Na₂S. α-Zr₂N₂S (space group: Immm, a = 4.1375(1) Å, b = 3.5422(1) Å, and c = 11.5204(3) Å) has the same α-[Zr₂N₂] layers, whereas the interlayer spacing between two adjacent [Zr₂N₂] layers is effectively decreased by 1/3 when compared with the parent compounds of ZrNX.     

Preparation and crystal structure characterization of CuNiGaSe<Subscript>3</Subscript> and CuNiInSe<Subscript>3</Subscript> quaternary compounds

Samples of the quaternary chalcogenide compounds, CuNiGaSe₃ and CuNiInSe₃, prepared by direct fusion and annealing method, were characterized by X-ray powder diffraction. In each case, the crystal structure was refined using the Rietveld method. Both compounds were found to crystallize in the tetragonal system, space group P \(\bar 4\)2c (N°112), with unit cell parameter values a = 5.6213(1) Å, c = 11.0282(3) Å, V = 348.48(1) ų and a = 5.7857(2) Å, c = 11.6287(5) Å, V = 389.26(3) ų for CuNiGaSe₃ and CuNiInSe₃, respectively. These compounds have a normal adamantane structures and are isostructural with CuFeInSe₃.     

Phase relations in the Ag<Subscript>8</Subscript>SnS<Subscript>6</Subscript>-Ag<Subscript>2</Subscript>SnS<Subscript>3</Subscript>-AgBr system and crystal structure of Ag<Subscript>6</Subscript>SnS<Subscript>4</Subscript>Br<Subscript>2</Subscript>

The T-x phase diagram of the Ag-Sn-S-Br system has been studied in the composition region Ag₈SnS₆-Ag₂SnS₃-AgBr, and a compound of composition Ag₆SnS₄Br₂ has been identified. Ag₆SnS₄Br₂ has a new structure, closely related to that of Ag₆GeS₄Br₂: sp. gr. Pnma, a = 6.67050(10), b = 7.82095(9), c = 23.1404(3) Å, Z = 4, R _B = 0.0519, R _wp = 0.0782, χ² = 1.36.     

Ho<Subscript>2</Subscript>S<Subscript>3</Subscript>-Ga<Subscript>2</Subscript>S<Subscript>3</Subscript> phase diagram

The Ho₂S₃-Ga₂S₃ system has been studied using differential thermal analysis, X-ray diffraction, microstructural analysis, microhardness tests, and density measurements, and its phase diagram has been constructed. The system contains three ternary compounds: Ho₃GaS₆, HoGaS₃, and Ho₆Ga_10/3S₁₄. Their melting behavior has been studied for the first time. The compound Ho₆Ga_10/3S₁₄ melts congruently at 1435 K; Ho₃GaS₆ and HoGaS₃ melt incongruently at 1370 and 1250 K, respectively. The Ho₂S₃-Ga₂S₃ system is a pseudobinary join of the ternary system Ho-Ga-S. At room temperature, the β-Ga₂S₃-based solid solution extends to 1.5 mol % Ho₂S₃; the Ho₂S₃ solubility in γ-Ga₂S₃ is 10 mol %. The compounds HoGaS₃ and Ho₃GaS₆ crystallize in orthorhombic symmetry (Ho₃GaS₆: a = 10.40 Å, b = 13.20 Å, c = 6.44 Å, Z = 4; HoGaS₃: a = 6.8 Å, b = 9.92 Å, a = 3.08 Å, Z = 4). Ho₆Ga_10/3S₁₄ has a hexagonal structure (a = 9.62 Å, c = 6.04 Å).     

Effect of Blocking and Superconducting Layer Doping on the Superconductivity and Magnetic Properties of Polycrystalline Sr<Subscript>2</Subscript>CaCu<Subscript>2</Subscript>O<Subscript>6</Subscript>

The possible difference in the properties upon doping the Sr₂CaCu₂O₆ superconducting or blocking layers with Fe and Eu respectively was investigated in this work. The homogeneous Sr_2?yEu_yCaCu₂O_6+δ and Sr₂CaCu_2?xFe_xO_6+δ (y = 0, 0.1, 0.5, x = 0, 0.05) compounds were produced by a high-pressure synthesis route. Judging by the magnetic susceptibility measurements, all samples exhibit a superconductivity transition and the Eu/Fe concentration dependencies on the diamagnetic moment and average T_c have been constructed using the experimental data. As a result, an unusual behavior of the T_c value was observed for the samples with doped Eu: a fivefold reduction in the europium concentration in the sample does not give a noticeable effect on the transition temperature value while the diamagnetic signal becomes more stronger. Complex superconducting dome was found for Eu-doped material: 0.1 ≤ y ≤ 0.5 region T_c vs. concentration data were approximated by inverted parabola-like curve with a maximum at y = 0.3. Difference in properties of the Eu and Fe-doped samples was also found in the behavior of the hysteresis loops showed the opposite orientations.     

Effect of Ni Doping at Pd Site in Nb<Subscript>2</Subscript>PdS<Subscript>5</Subscript> Superconductor

The superconducting properties of Nb₂PdS₅ superconductor have been investigated with Ni doping at Pd site All the bulk polycrystalline Nb₂Pd_1?xNi_x S ₅ (0 = x ≤ 0.10) samples are crystallized in singlephase monoclinic structure. The electrical resistivity and magnetic measurements of Nb₂Pd_1?xNi_x S ₅ (0 = x ≤ 0.15) were carried out to study the variation of superconducting critical parameters with Ni doping. Superconductivity in Nb₂PdS₅ sample completely disappears for x ≥ 0.15. We observed that the ratio of upper critical field to transition temperature decreases with increasing Ni concentration. Also, the magnetization study of Nb₂Pd_1?xNi_x S ₅ (0 = x ≤ 0.15) samples shows similar superconducting behaviour. In summary, the superconductivity in Nb₂PdS₅ sample is slightly varying with partial doping of Ni at Pd site in Nb₂PdS₅ superconductor.     

Effects of Ge<Superscript>4+</Superscript> acceptor dopant on sintering and electrical properties of (K<Subscript>0.5</Subscript>Na<Subscript>0.5</Subscript>)NbO<Subscript>3</Subscript> lead-free piezoceramics

Lead-free (K_0.5Na_0.5)(Nb_1-xGe _x )O₃ (KNN-xGe, where x = 0-0.01) piezoelectric ceramics were prepared by conventional ceramic processing. The effects of Ge⁴⁺ cation doping on the phase compositions, microstructure and electrical properties of KNN ceramics were studied. SEM images show that Ge⁴⁺ cation doping improved the sintering and promoted the grain growth of the KNN ceramics. Dielectric and ferroelectric measurements proved that Ge⁴⁺ cations substituted Nb⁵⁺ ions as acceptors, and the Curie temperature (T_C) shows an almost linear decrease with increasing the Ge⁴⁺ content. Combining this result with microstructure observations and electrical measurements, it is concluded that the optimal sintering temperature for KNN-xGe ceramics was 1020°C. Ge⁴⁺ doping less than 0.4 mol.%can improve the compositional homogeneity and piezoelectric properties of KNN ceramics. The KNN-xGe ceramics with x = 0.2% exhibited the best piezoelectric properties: piezoelectric constant d₃₃ = 120 pC/N, planar electromechanical coupling coefficient k_p = 34.7%, mechanical quality factor Q_m = 130, and tanδ = 3.6%.