Atomistic simulations of nanometric dislocation loops in bcc tungsten

Small dislocation loops formed from self-interstitial atoms (SIAs) are commonly found in irradiated metals. These defects significantly influence the mechanical properties of the materials. Atomistic simulations are used to describe nanometric circular dislocation loops with Burger’s vectors , and in bcc tungsten. Particular attention is paid to the habit plane of the loop. Two different embedded atom model (EAM) potentials are used. The energetics and geometry of the loops are studied as a function of their size.     

Morphology and interface structure of α-Fe2O3 islands grown on sapphire by ion-implantation and annealing

The morphology and interface structure of α-Fe₂O₃ islands grown on α-Al₂O₃ single crystals (sapphire) by Fe-ion-implantation and annealing in an oxidizing atmosphere have been studied using transmission electron microscopy. The α-Fe₂O₃ islands have the orientation relationship of and with sapphire. The typical outline of α-Fe₂O₃ islands consists of two (0 0 0 1) and six planes. The interfaces between α-Fe₂O₃ islands and sapphire are semicoherent, that is coherent regions separated by misfit dislocations at the interfaces. When imaged along the direction, the projected Burgers vector is determined to be . When imaged along the direction, the projected Burgers vector is determined to be . These misfit dislocations form a network structure at the interface to accommodate the mismatch between the lattices of the α-Fe₂O₃ and the α-Al₂O₃.     

First-principles study on electronic structures and absorption spectra for BaWO4 crystal containing barium vacancy

The electronic structures, dielectric function and absorption spectra for the perfect BaWO₄ (BWO) crystal and the BWO crystal containing barium vacancy () have been studied using density functional theory code CASTEP with the lattice structure optimized. The results indicate that the optical properties of the BWO crystal exhibit anisotropy and its optical symmetry coincide with lattice structure geometry of the BWO crystal. For the BWO crystal containing , there exhibit four absorption bands peaking at 0.71 eV (1751 nm), 1.85 eV (672 nm), 3.43 eV (362 nm) and 3.85 eV (322 nm), respectively. The origins of the 370 nm absorption band should be related to the .     

The interaction of antihydrogen with simple atoms and molecules

In this paper, we describe calculations that we have carried out of cross sections for rearrangement processes in very low-energy helium + antihydrogen scattering that result in or or . A significantly more accurate method from that used previously [E.A.G. Armour, S. Jonsell, Y. Liu, A.C. Todd, Nucl. Instr. and Meth. B 247 (2006) 127] is used to calculate the entrance channel wave function. Results are presented for the first two processes. Mention is made of the use of the method in calculations of low-energy e⁺H₂ scattering.     

Development of secondary ion mass spectroscopy using medium energy C60 ion impact

In this paper, we report time-of-flight (TOF) secondary ion mass spectroscopy using primary C₆₀ ions with an energy range from several tens of keV to several hundreds of keV. Application of the spectroscopy to the analysis of a poly(amino acid) film revealed that characteristic peaks, necessary for identification of the amino acid in proteins, show higher intensities for medium energy C₆₀ (120 keV and 540 keV ) impacts than those for low energy C₆₀ (30 keV ) impacts. This finding demonstrates that medium energy C₆₀ ion impacts are useful for highly sensitive characterization of amino acids.     

Hydrogen molecule - antihydrogen scattering at very low energies

We consider the low-energy scattering of antihydrogen () by the simplest molecule, H₂. This preliminary treatment applies a generalisation of the Kohn variational method to the calculation of total elastic cross section at low energies. The scattering wavefunction calculated by the generalised Kohn method is used to estimate the antiproton annihilation in flight using a delta function pseudo potential introduced in the treatment of antiproton annihilation in H- scattering.     

Ion implantation in 4H-SiC

Silicon carbide offers unique applications as a wide bandgap semiconductor. This paper reviews various aspects of ion implantation in 4H-SiC studied with a view to optimise ion implantation in silicon carbide. Al, P and Si ions with keV energies were used. Channelling effects were studied in both a-axis and c-axis crystals as a function of tilts along major orthogonal planes and off the major orthogonal planes. Major axes such as [0 0 0 1] and the and minor axis like the showed long channelling tails and optimum tilts for minimising channelling are recommended. TEM analyses of the samples showed the formation of (0 0 0 1) prismatic loops and the loops as well,in both a and c-cut crystals. We also note the presence of voids only in P implanted samples implanted with amorphising doses. The competing process between damage accumulation and dynamic annealing was studied by determining the critical temperature for the transition between crystalline and amorphous SiC and an activation energy of 1.3 eV is extracted.     

Radiation induced defects in BaBPO5:Ce and their role in thermally stimulated luminescence reactions: EPR and TSL investigations

Defect centers induced by gamma irradiation in Ce doped BaBPO₅ were investigated using EPR spectroscopy. From EPR studies, three phosphorous centered radicals were characterized on the basis of observed ³¹P hyperfine splitting and g values as , and radicals. In addition to this, two types of boron oxygen hole centers (BOHC) and O⁻ were also formed at room temperature. An intense broad signal in sample annealed in argon (g_⊥ = 1.9258 and g_‖ = 1.8839) was assigned to Ce³⁺ ions associated with the electron trapped at anion vacancy or nearby lattice defect. TSL studies showed two glow peaks, a relatively weaker one at 425 K and an intense one at 575 K. Spectral studies of the TSL glow peaks have shown that Ce³⁺ ion acts as emission center. From the temperature dependence of the EPR spectra of gamma irradiated samples, the glow peaks at 425 K and 575 K were attributed to thermal destruction of /O⁻ and BOHC, respectively, by trapping of electrons from elsewhere. The energy released in electron hole recombination process is used for the excitation of Ce³⁺ ions resulting in these glow peaks at 425 K and 575 K. The spectral studies of the TSL glow peaks have shown emission at 330 nm indicating Ce³⁺ acts as the luminescent centre. The trap depth and the frequency factor for the 425 K and 575 K peaks were determined using different heating rates method.     

380 keV proton irradiation effects on photoluminescence of Eu-doped GaN

The effect of 380 keV proton irradiation on the photoluminescence (PL) properties has been investigated for undoped and Eu-doped GaN. As the proton irradiation exceeds , a drastic decrease of PL intensity of the near band-edge emission of undoped GaN was observed. On the other hand, for Eu-doped GaN, the PL emission corresponding to the ⁵D₀→⁷F₂ transition in Eu³⁺ kept the initial PL intensity after the proton irradiation up to . Present results, together with our previous report on electron irradiation results, suggest that Eu-doped GaN is a strong candidate for light emitting devices in high irradiation environment.     

Comparison of secondary ion emission yields for poly-tyrosine between cluster and heavy ion impacts

Emission yields of secondary ions necessary for the identification of poly-tyrosine were compared for incident ion impacts of energetic cluster ions (0.8 MeV , 2.4 MeV , and 4.0 MeV ) and swift heavy monoatomic molybdenum ions (4.0 MeV Mo⁺ and 14 MeV Mo⁴⁺) with similar mass to that of the cluster by time-of-flight secondary ion mass analysis combined with secondary ion electric current measurements. The comparison revealed that (1) secondary ion emission yields per impact increase with increasing incident energy within the energy range examined, (2) the 4.0 MeV impact provides higher emission yields than the impact of the monoatomic Mo ion with the same incident energy (4.0 MeV Mo⁺), and (3) the 2.4 MeV impact exhibits comparable emission yields to that for the Mo ion impact with higher incident energy (14 MeV Mo⁴⁺). Energetic cluster ion impacts effectively produce the characteristic secondary ions for poly-tyrosine, which is advantageous for highly sensitive amino acid detection in proteins using time-of-flight secondary ion mass analysis.