Starch urea-formaldehyde matrix encapsulation. IV. Influence of solubility and physical state of encapsulant on rate and mechanism of release

The influence of the physical state and solubility of the encapsulant on the rate and mechanism of release and swelling of the cross-linked starch-urea formaldehyde (St-UF) matrix has been studied by encapsulating model organic compounds. The release and swelling data have been analyzed in terms of the generalized equation M_t/M_∞ = ktⁿ applicable for swellable controlled-release systems. This matrix system shows and an inverse relationship of release rate with the cross-link ratio for all the encapsulants studied. The solid encapsulants have n values in the range of 0.22–0.41, indicating a Fickian or anomalous mechanism. Further, the release rate increases with solubility of the encapsulant. The liquid encapsulants have n values in the range of 0.5–1.5, indicating Case II transport mechanism. The release rates for liquid encapsulants are lower by one to three orders of magnitude than those for solid encapsulants and are not influenced by encapsulant solubility. This indicates a polymer chain relaxation-controlled mechanism of release for liquid encapsulants. © 1993 John Wiley & Sons, Inc.     

Kinetics of polycondensation of urea with formaldehyde. Molecular weight distribution,average molecular weight,and polydispersity parameters

The molecular weight distribution, molecular weight averages M _n, M _w, M _z, polydisperisty coefficient, statistic standard deviation of number and weight distribution, and Hoseman–Schramek index of the polycondensates of urea with formaldehyde have been estimated. The properties of this solution were obtained by the help of the combination of the following methods: GPC, VPO, turbidimetric titration, and fractional precipitation. The course of the polycondensation described was formally divided in the following stages: (1) formation of methylolated urea derivates and of the lowest oligomers, (2) decrease in the content of methylol urea and in the content of the lowest oligomers with M < 200, and production of soluble molecules between 10³ and 10⁴, and (3) formation of insoluble products.     

Controlled antibody release from a matrix of poly(ethylene-co-vinyl acetate) fractionated with a supercritical fluid

A new method is presented for controlling the rate of antibody (Ab) release from an inert matrix composed of poly(ethylene-co-vinyl acetate) (EVAc), a biocompatible polymer that is frequently used to achieve controlled release. Using supercritical propane, a parent EVAc sample (M_n = 70 kDa, M_w/M_n = 2.4) was separated into narrow fractions with a range of molecular weights (8.7 < M_n < 165 kDa, 1.4 < M_w/M_n < 1.7). Solid particles of Ab were dispersed in matrices composed of different polymer fractions and the rate of Ab release into buffered saline was measured. The rate of Ab release from the EVAc matrix depended on molecular weight: > 90% of the incorporated Ab was released from low molecular weight fractions (M_n < 40 kDa) during the first 5 days of release, while < 10% was released from the high molecular weight fraction (M_n > 160 kDa) during 14 days of release. No significant differences in polymer composition, glass-transition temperature, or crystallinity were identified in the different molecular weight fractions of EVAc. Mechanical properties of the polymer did depend on the molecular weight distribution, and correlated directly with Ab release rates. Because it permits rapid and reproducible fractionation of polymers, supercritical fluid extraction can be used to modify the performance of polymeric biomaterials. © 1993 John Wiley & Sons, Inc.     

29Si nuclear magnetic resonance studies of oligomeric and polymeric siloxanes: 4. Chemical shift effects of end-groups

²⁹Si n.m.r. spectra have been obtained for mixtures of polysiloxane oligomers in four cases, viz. MD_nM, M^HD_nM^H, M^OHD_nM^OH and MD^H_nM. Spectral dispersion is best (under the conditions studied) for the M^OHD_nM^OH series, where signals due to oligomers up to n = 9 have been separately detected. The spectra have been fully assigned, and shift effects due to the end-groups (equivalent to shifts expected in long chain polymers) have been derived. The significance of the data is discussed.     

Statistics of star-shaped molecules III. Stars with branched nuclei

Number and weight average molecular weights and scattering behaviour of star molecules with extended branched nuclei are calculated by application of cascade theory. The nuclei considered arise from random polycondensation of monomers of the A₃ or of the A—B/C type. Nuclei of the first type are characterised by very large molecular polydispersities (M_w/M_n α M_w), while nuclei of the second type have less broad molecular weight distributions (M_w/M_n α M_n). The rays of the stars are assumed to be either monodisperse or to obey the Schulz—Flory “most probable” length distribution. Analytic expressions are given for M_w, M_n, 〈S²〉_z and the particle scattering factor P_z(h) which was averaged over the ensemble. The results are compared with stars of spherical and uniform nuclei whose molecular weights and mean square radii of gyration equal M_wN and 〈S²〉_zN from the other two types of nuclei. In the limit of very large ray lengths the scattering behaviour is determined solely by the number of branches z. At shorter chain length of the rays structure and polydispersity of the nuclei have marked influence. This influence is still easily noticed from the angular dependence of scattered light at chain lengths where no differences in the 〈S²〉_z versus M_w plot are detectable. The mean square radius of gyration depends only weakly on the number of rays and eventually becomes independent of it if z 15. In that limit 〈S²〉_z depends virtually on the length of the rays alone and its distribution. Stars whose rays have a most probable length distribution exhibit 〈S²〉_z values twice as large as stars with monodisperse rays. A procedure is suggested and discussed for the determination of the number and length of the rays if the scattering behaviour of the isolated nucleus and the isolated linear chains is known.     

Properties of aqueous salt solutions of poly(vinylpyrrolidone). II. Polymer dimensions and thermodynamic quantities

The unperturbed dimensions and thermodynamic parameters of poly(vinylpyrrolidone) (PVP) have been studied in aqueous salt solutions, e.g. phosphates, mono- and dihydrogen phosphates, carbonates, sulphates of sodium and potassium. Values of K₀ ( = [η]_ΘM^-1/2, where [η]_Θ is intrinsic viscosity at the theta temperature and M is molecular weight) with M_w = 78 000 g mol^-1 were found to range from 4·63×10^-4 to 5·56×10^-4 dl g^-1, and root-mean-square end-to-end distances, 〈r²〉₀^1/2, ranging from 1·61×10^-6 to 1·68×10^-6cm were evaluated. Values of the characteristic ratio, C_n, the steric parameter, σ, and the enthalpy and the entropy of dilution parameters, χ_H and χ_S, have also been calculated, and the interaction parameter was found to be χ-0·5<-0·001 for aqueous salt solutions of PVP. ©1997 SCI     

Influence of Poly(L-lactic acid) Molecular Weight on the Encapsulation Efficiency of Urea in Microcapsule Using a Simple Solvent Evaporation Technique

Poly(L-lactic acid) microencapsulated urea was prepared in water-in-oil-in-water (W₁/O/W₂) system by the solvent evaporation technique. The influence of poly(L-lactic acid) molecular weight on the percent loading, encapsulation efficiency, and the microcapsule morphology was studied using poly(L-lactic acid) having different number average molecular weights (M_n). Using the higher M_n, the smoother shell with complete encapsulation microcapsules was formed. Moreover, the percent loading and encapsulation efficiency of urea also increased with the poly(L-lactic acid) molecular weight. At 80,000 g/mol of poly(L-lactic acid), the obtained microcapsule gave the highest both percent loading (32%) and encapsulation efficiency (56%). The urea control release study of the prepared microcapsules was implemented by in vitro testing. The encapsulated urea was gradually released from the microcapsules, approximately 53, 29, and 22% of poly(L-lactic acid) at 3,000, 30,000, and 80,000 g/mol, respectively, for a month. These results presented the possibility of the prepared poly(L-lactic acid) microcapsules-encapsulated urea for urea control release that could be utilized in agricultural applications.     

Macromonomers by activated polymerization of oxiranes. Synthesis and polymerization

Macromonomers were obtained by cationic polymerization of propylene oxide and epichlorohydrin proceeding by the activated monomer mechanism with hydroxyethyl acrylate as initiator. Up to DP _n ～ 15 for propylene oxide and DP _n ～ 20 for epichlorohydrin, polymerization proceeds as a living process, giving with quantitative yields macromonomers with functionality equal to one, controlled molecular weight and narrow molecular weight distribution (M _wM _n<1.2) free of side products. In the higer molecular weight region, side reactions become increasingly noticeable. Propylene oxide macromonomers undergo radical homopolymerization. Homopolymerization of macromonomer with M _n = 8×10² gives graft copolymers with M _n up to 7.2×10³ in copolymerization with styrene, completely soluble graft copolymers with M _n ～ 2×10⁴ were obtained. Radical copolymerization of epichlorohydrin macromonomers with styrene gives initially soluble products with M _n ～ 6×10⁴ were obtained. Radical copolymerization of epichlorohydrin macromonomers with styrene gives initially soluble products with M_n～ 6×10⁴, which are converted in the later stages into insoluble gels, apparently due to the chain transfer to chloromethly groups of the polyepichlorohydrin chains.     

Graft copolymerization onto starch. II. Grafting of acrylonitrile to granular native potato starch by manganic pyrophosphate initiation. Effect of reaction conditions on grafting parameters

The effect of reaction conditions on the composition of native potato starch–polyacrylonitrile graft copolymers initiated by manganic pyrophosphate onto starch slurries at 30°C has been examined. In general, when the Mn³⁺ ion concentration was increased from 0.15 × 10^?3M to 3.0 × 10^?3M (other conditions kept constant), an increase in conversion of monomer to polymer and % add-on was observed, whereas frequency of grafts (anhydroglucose units, AGU, per grafted chain) decreased. Also, the average molecular weights of grafts showed a decrease from 2.2 × 10⁵ to 1.5 × 10⁵. Increasing the concentration ratio of starch to monomer during polymerization by a factor of 3 produced an increase in the conversion of monomer to polymer, whereas an increase in frequency of grafts (AGU/chain) was obtained. Values of % add-on and average molecular weights of the grafts showed, however, a decreasing tendency. It was observed that grafting onto starch took place readily even at acid additions as low as 10 × 10^?3M H₂SO₄ (pH ?1.8). Selective solvent extraction of homopolymer and extremely low conversions of monomer to polymer (0.1%–1.5%) in duplicate runs without addition of starch indicated that grafting efficiencies were high in all cases. An attempt has been made to interpret the results in terms of variations in factors such as initial ratio of (Mn³⁺)/(AGU), termination rate of acrylonitrile chain radicals by oxidation by Mn³⁺ ions, oxidation rate of radicals formed on anhydroglucose units by Mn³⁺ ions, and physical factors such as diffusion rate of Mn³⁺ ions through the polyacrylonitrile-grafted starch granules for terminating the radicals.     

PMMA composites of single‐walled carbon nanotubes‐graft‐PMMA

To facilitate the dispersion of single‐walled carbon nanotubes (SWCNT) into poly(methyl methacrylate) (PMMA), SWCNT were functionalized with a RAFT chain transfer agent, and PMMA was grafted from the SWCNT by reversible addition–fragmentation transfer (RAFT) polymerization to give SWCNT‐g‐PMMA containing 6 wt % PMMA. SWCNT‐g‐PMMA in the form of small bundles was dispersed into PMMA matrices. The SWCNT‐g‐PMMA filler increased the glass transition temperature (T_g) of the composite when the matrix molecular weight M_n was less than the graft molecular weight, but not when the matrix M_n was equal to or greater than the graft M_n. The threshold of electrical conductivity of the composites as a function of weight percent SWCNT increased from 0.2% when matrix M_n was less than graft M_n to about 1% when matrix M_n was greater than graft M_n. Dynamic mechanical analyses of the composites having graft M_n less than or equal to matrix M_n showed broader rubbery plateaus with increased SWCNT content but no significant differences between samples with different grafted PMMAs. The results indicate that lower M_n matrix wets the SWCNT‐g‐PMMA whereas higher M_n matrix does not wet the SWCNT‐g‐PMMA. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39884.     

Synthesis and biological activity of phthalimide‐based polymers containing 5‐fluorouracil

The attachment of anticancer agents to polymers is a promising approach towards reducing the toxic side‐effects and retaining the potent antitumour activity of these agents. A new tetrahydrophthalimido monomer containing 5‐fluorouracil (ETPFU) and its homopolymer and copolymers with acrylic acid (AA) and with vinyl acetate (VAc) have been synthesized and spectroscopically characterized. The ETPFU contents in poly(ETPFU‐co‐AA) and poly(ETPFU‐co‐VAc) obtained by elemental analysis were 21 mol% and 20 mol%, respectively. The average molecular weights of the polymers determined by gel permeation chromatography were as follows: M_n = 8900 g mol^?1, M_w = 13 300 g mol^?1, M_w/M_n = 1.5 for poly(ETPFU); M_n = 13 500 g mol^?1, M_w = 16 600 g mol^?1, M_w/M_n = 1.2 for poly(ETPFU‐co‐AA); M_n = 8300 g mol^?1, M_w = 11 600 g mol^?1, M_w/M_n = 1.4 poly(ETPFU‐co‐VAc). The in vitro cytotoxicity of the compounds against FM3A and U937 cancer cell lines increased in the following order: ETPFU > 5‐FU > poly(ETPFU) > poly(ETPFU‐co‐AA) > poly(ETPFU‐co‐VAc). The in vivo antitumour activities of all the polymers in Balb/C mice bearing the sarcoma 180 tumour cell line were greater than those of 5‐FU and monomer at the highest dose (800 mg kg^?1). © 2002 Society of Chemical Industry     

Quantitative branching of linear and branched polysaccharide mixtures by size exclusion chromatography and on-line low-angle laser light scattering detection

The quantitative branching characterization of polysaccharide via size exclusion chromatography (SEC) and on-line low-angle laser light scattering (LALLS) detection is presented from both theoretical arguments as well as direct experimental evidence. The two measurable branching parameters g_v(m) [= (M_l/(M _n)_m)_v] and g′_v(m) [ = (M_l/(M _w)m)v] of a sample mixture have been related theoretically to the mixture's composition. There exists linear relationships between g_v(m) and W_b,v (the mass fraction of branched component in mixture) as well as between g′_v(m)^?1 and w_b,v. The latter correlation has been demonstrated experimentally employing a combined SEC/LALLS technique, and displays excellent agreement with the theoretical predictions. Furthermore, this polymer branching characterization method has been applied to study enzymatic starch hydrolysates products. The molecular weight distribution and branching distribution have been obtained.     

Graft copolymerization onto starch. IV. Grafting of methyl methacrylate to granular native potato starch by manganic pyrophosphate initiation

A study has been made of graft copolymerization of methyl methacrylate onto native potato starch in aqueous slurry at 30°C. As Mn³⁺ concentration was increased from 0.15 X 10^-3M to 1.0 X 10^-3M, conversion of monomer to polymer and add-on of polymer to starch increased and frequency of grafts (anhydroglucose units per grafted chain) decreased sharply. The average molecular weights of the PMMA grafts also decreased in this range. At Mn³⁺ concentrations from 1.0 X 10^-3M to 3.0 X 10^-3M, only minor changes in grafting parameters were observed. When the amount of starch charged per batch was increased threefold, the add-on decreased sharply, the molecular weight increased slightly, and the conversion of MMA monomer to polymer remained almost constant. The increase in frequency of grafts (AGU/chain) was almost directly proportional to the increase in the amount of starch charged. In all cases the average molecular weights of grafts were of the order of 10⁶ and the grafting efficiencies high, normally greater than 85%. These results were compared with those previously obtained for grafting of acrylonitrile onto starch. They were interpreted in terms of initial (Mn³⁺)/(AGU) ratio, total number of radicals initiating grafting, and compatibility of methyl methacrylate monomer with poly(methyl methacrylate) chains.     

Polymers from renewable sources. III. Hydroxy-terminated myrcene polymers

A range of hydroxy-terminated polymyrcenes has been prepared using hydrogen peroxide initiated polymerization of pyrolysate grade, β-myrcene in n-butanol solution at 100°C. An oligomeric fraction, containing a large proportion of dimeric material formed via the Diels-Alder reaction, always accompanies the major polymeric fraction. Procedures are described for the removal of this oligomeric material. Polyols so prepared and purified had number average molecular weights (M _n) between 4000 and 2000 g mol^?1 at low and high initiator concentrations, respectively, with corresponding number average functionalities (f _n) between 1.3 and 2.3 and polydispersities (M _w/M _n) of ～ 1.3. The microstructure of the polyols was investigated using NMR spectroscopy from which the main mode of propagation during polymerization of myrcene was deduced to be 1,4 addition across the conjugated double bonds. Glass transition temperatures of the polymyrcenes measured by differential scanning calorimetry were in the range ?50–?60°C.     

The production of a new partially biodegradable starch plastic by reactive extrusion

The grafting of polystyrene onto dissolved starch in a twin screw extruder has been studied. This copolymerization was initiated using the thermal initiators benzoyl peroxide and K₂S₂O₈. As end product a mixture containing polystyrene‐grafted starch, homopolymer of polystyrene and starch was obtained. Parameters like screw rotation rate, fully filled length of the extruder, wall temperature and throughput have been varied in order to obtain information about their influence on conversion, graft percentages and molecular weight of the materials formed. To increase the amount of graft points, maleic acid anhydride (MAH) was added resulting in an increased grafting of polystyrene onto starch. Graft percentages of 60% could be achieved. The total conversion of styrene could be controlled by adjusting extruder parameters like barrel temperature, fully filled length and initiator type. Conversions of 95% were found. Molecular weights of the polystyrene formed could be controlled by adding a chain transfer agent (dodecylmercaptan) to the styrene phase. In this way the molecular weight (M_n) of the styrenic part could be varied from 20,000 to 140,000. The experiments with the chain transfer agent showed that the grafting of polystyrene onto starch is a process occurring at the interface between the dissolved starch and the styrene phase.     

Polymers from renewable sources. III. Hydroxy-terminated myrcene polymers

A range of hydroxy-terminated polymyrcenes has been prepared using hydrogen peroxide initiated polymerization of pyroysate grade, β-myrcene in n-butanol solution at 100°C. An oligomeric fraction, containing a large proportion of dimeric material formed via the Diels–Alder reaction, always accompanies the major polymeric fraction. Procedures are described for the removal of this oligomeric material. Polyols so prepared and purified had number average molecular weights (M _n) between 4000 and 2000 g mol^?1 at low and high initiator concentrations, respectively, with corresponding number average functionalities (f _n) between 1.3 and 2.3 and polydispersities (M _w/M _n) of ～1.3. The microstructure of the polyols was investigated using NMR spectroscopy from which the main mode of propagation during polymerization of myrcene was deduced to be 1,4 addition across the conjugated double bonds. Glass transition temperatures of the polymyrcenes measured by differential scanning calorimetry were in the range ?50–60°C.     

Synthesis and properties of polyurethane‐urea‐based liquid bandage materials

To obtain ideal liquid bandage polymer materials, a series of polyurethane‐urea dispersions were synthesized from 4,4′‐diisocyanato dicyclohexylmethane (H₁₂MDI) and ethylene diamine with different molar ratio of polyol blend [polyethylene glycol (PEG, M_n = 2000 g/mol)/hydroxy terminated poly(dimethylsiloxane) (PDMS, M_n = ～ 550 g/mol)] and acetone/ethanol as a solvent. The effect of PDMS content in PEG/PDMS on the viscosity, mechanical properties, water contact angle/surface energy, insolubility in water (%), water absorption (%), equilibrium water content (%), and water vapor transmission rate (g m^?2 day^?1) of polyurethane‐urea films was investigated. As PDMS content increased, the water contact angle, insolubility in water, and tensile strength/elastic recovery of film sample increased; however, the surface energy, water absorption (%), equilibrium water content (%), and water vapor transmission rate (g m^?2 day^?1) of film sample decreased. By a wound‐healing evaluation using a full‐thickness rat model experiment, it was found that a wound covered with a typical polyurethane‐urea liquid bandage film (PD2 sample) was filled with new epithelium without any significant adverse reactions. These results suggest that the polyurethane‐urea‐based liquid bandages (samples: PD2 and PD3) prepared in this study may have high potential as new wound dressing materials, which provide and maintain the adequate wet environment required to prevent scab formation and dehydration of the wound bed. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Aliphatic polyesters. I. The degradation of poly(ϵ-caprolactone) in vivo

The degradation of poly(?-caprolactone) in rabbits, rats, and water was studied by measurement of changes in intrinsic viscosity, molecular weight, crystallinity, Young's modulus, and weight. Degradation proceeds by nonenzymatic random hydrolytic cleavage of ester linkages. The process is autocatalytic, and the kinetic relationship M_n/M_n^o = exp(–kt) is observed until the M_n has decreased to approximately 5000. Significant weight loss is not observed until this point but, once initiated, the rate of weight loss depends markedly on the particle size. Chain scission is associated with an increase in crystallinity, which partly determines the rate of degradation.     

Diffusion behavior of poly(ethylene imine) into keratin fibers using microspectrophotometry

In order to investigate the diffusion behavior of poly(ethylene imine) (PEI) into keratin fibers, cross‐sectional samples of bleached white human hair treated with PEI were prepared. We were successful in developing a method for analyzing the diffusion behavior of PEI into human hair, which to our knowledge is a first. The diffusion pattern of PEI into human hair, which cannot be determined by optical microscopy, can be determined by our method. After the treatment, the cross‐sectioned hair samples were dyed with Orange II and the cross‐sectional intensity scans were measured at a wavelength of 487 nm (λ_max of Orange II) with a microspectrophotometer. In our method, the diffusion pattern of PEI at pH 11.1 showed Fickian type characteristics. This suggests that the diffusion coefficient of PEI is essentially independent of the PEI concentration. By calculating the diffusion coefficient from the PEI concentration profile, the diffusion coefficient of PEI [number‐average molecular weight (M_n) = 300 and 600] into the bleached human hair was found to be on the order of 10^?10 cm²/s. In addition, the diffusion coefficient of PEI (M_n = 600) with urea added increased twofold in comparison with that of PEI without urea added. This experiment demonstrated that urea acts as a penetration accelerator for PEI. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 97: 65–71, 2005     

Urea/NaOH aqueous solution as new solvent of aeromonas gum

Aeromonas (A) gum, an acidic heteropolysaccharide, formed aggregates easily in NaCl aqueous solution. A novel solvent of the A gum, which can prevent aggregation, was found to be 0.20M urea/0.25M NaOH aqueous solution. The weight‐average molecular weight (M_w), radius of gyration (〈s²〉^1/2), and intrinsic viscosity ([η]) of the samples were determined in 0.20M urea/0.25M NaOH aqueous solution at 25°C by light scattering (M_w, 〈s²〉^1/2) and viscometry ([η]). The values of M_w, 〈s²〉^1/2, and [η] were close to those in 0.20M lithium chloride/dimethylsulfoxide, in which the A gum exists as a semiflexible single chain, implying the same conformation for the A gum in 0.20M urea/0.25M NaOH aqueous solution. The results revealed that 0.20M urea/0.25M NaOH aqueous solution is a good solvent, which effectively avoids the aggregates of the A gum in aqueous solution. Moreover, it can be used to investigate the solution properties and chain conformation of water‐insoluble polysaccharides or the polysaccharides that are easily aggregated in aqueous systems. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 97: 1710–1713, 2005