Evolution of metropolitan area networks to broadband ISDN

Broadband architecture and network evolution strategies based on interface standards emerging from the IEEE 802.6 MAN Committee and the American National Standards Institute (ANSI) T1S1 and CCITT Working Groups on broadband integrated services digital networks (BISDN) are outlined. The recent history of both the MAN and BISDN standards activities is traced, and some of the motivations behind specific developments are discussed. In the context, local area networks (LANs) and MANs are compared and contrasted, with special attention given to requirements specific to a public MAN. The convergence of the MAN and BISDN protocols is examined. The benefits of commonality between these two standards are described in terms of lower-cost network architectures, and terminal equipment is examined. It is shown that broadband networks can exploit the synergy between 802.6-based MANs and wider-area BISDN networks, and that 802.6-based MANs can gracefully evolve into countrywide networks using BISDN asynchronous transfer mode (ATM) switching. Example networks are used to illustrate the evolution proposals     

ISDN-the path to broadband networks

The author evaluates the effect of ISDN (integrated services digital network) on the field of data networks, anticipates future directions for this technology, and discusses how the user should view these developments. It is emphasized that broadband ISDN (BISDN) is a service that has identified capabilities that are truly exciting and could very well dominate data networking in this decade. It is noted that the success of BISDN will depend strongly on the rollout of products, the ubiquity of its presence, and the tariffing of its services     

A guide to data communications: B-ISDN and how it works

The capabilities of the emerging broadband integrated services digital network (B-ISDN) are examined. Fundamental differences between broadband and narrowband ISDN are identified. The basics of asynchronous transfer mode (ATM), the switching technique used by BISDN networks, are discussed. Channel identification, generic flow control, using ATM, and connectionless service are considered. The first services expected to make use of ATM are briefly described     

Interworking IEEE 802/FDDI LANs via the ISDN frame relay bearerservice

The author presents a generic architecture for interconnecting LANs (local area networks) through the ISDN (integrated services digital network) bearer services, particularly the frame relay bearer service. The architecture is derived from the IEEE 802.1 MAC (medium access control) bridge and ISDN frame relay standards. An algorithm for MAC/ISDN address resolution that makes minimal use of the WAN (wide area network) bandwidth (which is potentially the most expensive resource) is presented. The algorithm uses a MAC/ISDN address resolution server to resolve addresses for new stations, the resolution in all other cases (e.g. stations moving from the ISDN address to another) being fully distributed. To prevent a server failure from inhibiting communication to new stations, a backup server may be provided. A practical implementation of the architecture has been found capable of supporting full throughput at ISDN hyperchannel rates (384-1920 kb/s) for all IEEE 802.3 frame lengths. Frame relay is seen as having a number of important advantages for LAN interconnection, including the following: a large number of virtual circuits available, giving the potential for a rich interconnection architecture with single-hop connections across the ISDN; and low processing overhead enabling efficient use of ISDN channels, including ISDN hyperchannels (384-1920 kb/s)     

ISDN protocol architecture

IT IS NOW widely recognized that the Integrated Services Digital Network (ISDN) concept is providing a useful framework for the development of future telecommunications networks and services. An ISDN can be regarded as a generalpurpose digital network capable of supporting (or integrating) a wide range of services (voice and non-voice) using a small set of standard multipurpose user-network interfaces. Relevant CCITT Recommendations (or standards) on ISDN interfaces were expected to be available in 1984, the final year of the current study period. This paper reviews CCITT progress on the architectural studies of protocols associated with ISDN's, in particular, the ISDN Protocol Reference Model being developed by Study Group XVIII. This Model, based on the concepts and principles of the ISO/CCITT Open Systems Interconnection (OSI) Reference Model, aims at providing a unified framework for modeling ISDN multiservice communications and capabilities. The new Model is applied to several possible ISDN communications configurations, enabling a number of technical issues to be easily identified.     

World-wide standardization of broadband ISDN

A growing market demand for high-performance voice, data, image and video networks, coupled with advances in high-speed technologies has heightened interest in broadband ISDN (BISDN) throughout the world. Network providers, equipment manufacturers and standards bodies are working jointly to accelerate the definition of BISDN interfaces in anticipation of emerging market opportunities. BISDN is being designed as the foundation upon which to implement very flexible, high-bandwidth, high-performance networks. A multiplexing concept called asynchronous transfer mode (ATM), which can offer bandwidth on demand at rates exceeding 150 Mb/s, high-speed packet switching, and an efficient protocol which adapts existing information streams into the ATM format are key attributes of the emerging BISDN network standards. This paper reviews the motivations behind BISDN, explains its key attributes and challenges and discusses possible strategies for evolving today's network toward BISDN.     

Narrowband and broadband ISDN CPE directions

Noting that ISDN customer premises equipment (CPE) is critical to the successful deployment of ISDN whatever the bandwidth, the author examines the market for narrowband and wideband integrated services digital network (NISDN and BISDN) CPE. He establishes the basic requirements for NISDN terminals and discusses terminal adaptors, digital telephone sets, screen-based telephony, workstations, customer premises networks, and CPE maintenance and upgrades. He examines the BISDN market and discusses the features and architecture of the terminals     

Frame relaying as a common access to N-ISDN and B-ISDN dataservices

Widespread use of personal computers (PCs) and PC networks is leading to a strongly increased demand for WAN data services in terms of number of accesses and required bandwidth. Narrowband ISDN (N-ISDN) and broadband ISDN (B-ISDN) have the potential to satisfy, respectively, the existing and developing requirements. However, a flexible evolution path needs to be identified for the provision of ISDN access facilities. Frame relaying and frame switching are prime candidates for such a common access facility, although not necessarily intrinsic B-ISDN data services. The article gives an overview of frame relaying and frame switching as possible candidates for harmonized access to N-ISDN and B-ISDN. Pre-ISDN, N-ISDN, and B-ISDN services with their characteristics in terms of cost and performance are first described. It is shown how frame relaying and switching are positioned with respect to the identified service requirements. Then some examples are given of selected scenarios, and the role played by specifically frame relaying to provide access to B-ISDN services, offering at the same time a seamless evolutionary path from N-ISDN to B-ISDN. The position of frame relaying and switching is discussed first in respect to application requirements, and then in architectural terms. Frame relay (and frame switching) services are then identified as services that provide the necessary low threshold and short lead time for rapid market penetration, in order to allow applications to indirectly take advantage of the benefits of ATM services     

Evolution of ISDN towards broadband ISDN

Worldwide activities to evolve integrated services digital network (ISDN) into an optical-fiber-based universal broadband network have resulted in the first baseline documents, such as CCITT Recommendation I.121. The asynchronous transfer mode has been established as a key element of broadband ISDN (BISDN). The adoption of the G.707-709 recommendations on the new digital transmission hierarchy will also strongly influence further BISDN development. The author presents the current state of the BISDN discussion, especially within CCITT, briefly addressing broadband services and then concentrating on the user-network interface, as its definition is of utmost importance with respect to the introduction of a worldwide unique BISDN. Network scenarios and evolution and interworking aspects of the arising broadband realizations are also addressed     

Standardization of network technologies and services

Asatani (1994) reported on a variety of topics, including broadband aspects of ISDN (B-ISDN), intelligent network (IN), future public land mobile telecommunication systems (FPLMTS), and audiovisual multimedia services (AVMMS). With the exception of IN, the present report covers progress in those same areas, with a status report on telecommunication management network (TMN) and universal personal telecommunications (UPT). Fora and consortia which may influence standardizations on these topics and standardization activities related to information infrastructure (II) are also reported     

Asynchronous transfer mode (ATM) operation via satellite: Issues,challenges and resolutions

Key issues regarding the operation of the broadband integrated services digital network (BISDN) via satellite are presented herein. The specific issues, challenges, and their resolutions are detailed. In particular, the impact of error characteristics and propagation delay on the operation of BISDN via satellite is discussed. Solutions are presented for removing adverse effects and providing high-quality service to users of BISDN via satellite.     

DDN上的帧中继业务

帧中继是在分组交换的基础上发展起来的新技术。它通过简化数据传输协议,实现通信的高速化,具有高速、低时延的特点。在数字数据网(DDN)上开放帧中继业务,可更有效地利用带宽,实现LAN的互连。本文主要介绍了帧中继的功能、帧结构以及在通信网上的传输方式。     

Protocols for ATM access networks

The development and standardization of ATM (asynchronous transfer mode) and signaling protocols for BISDN (broadband integrated services digital network) are considered. A view of both ATM and signaling protocols in which the key design guideline is service flexibility is presented. The approaches suggested are intended to create a service-independent broadband facility that is also sensitive to both service performance and network efficiency. Key issues are raised that will require serious consideration by standards groups, manufacturers, and service providers as BISDN moves toward production     

The role of ISDN in data networking

The integrated services digital network (ISDN) offers on-demand switched end-to-end digital connectivity over the wide area, enabling the integration of both voice and data services over a common core network. This paper considers the role of ISDN in data networking, both as the core transport network and as a means of enhancing resilience in a mixed-technology data solution, complementing other data network technologies. The issues associated with data transport based on an ISDN solution are considered, and include security, bandwidth utilisation, scalability and the management of ISDN-attached devices. Optimising the use of ISDN networks for supporting the most prevalent routed and routeing protocols is also discussed.     

PHS roaming signaling protocol architecture toward global mobilitynetwork

The network for supporting the global personal communication is called the global mobility network (GLOMONET), where global mobility is guaranteed by coordination between intelligent networks (INs). This paper describes the implementation of a roaming signaling protocol for the personal handy-phone system (PHS) GLOMONET, clarifying the concepts of the PHS architecture regarding the GLOMONET. The PHS is a more economical personal communication system than existing cellular systems, by introducing the concept that the PHS service is provided by the most effective use of the existing ISDN and IN functions, where the majority of network functions to provide ISDN services are commonly used for functions for PHS service provision. The PHS mobility function realized by the IN guarantees flexible and effective roaming service provision for the globalization of future personal communication. The proposed PHS signaling protocol architecture is based on the intelligent network capability set 2 (IN CS2) defined by the International Telecommunication Union-Telecommunication Standardization Sector (ITU-T) Study Group 11 and a visitor location register (VLR) database scheme with efficient signal transfer in the GLOMONET. The PHS specific roaming signaling protocol is defined by the service-independent IN application protocol (INAP). The proposed PHS concepts and roaming signaling protocol were reflected to the national telecommunications standards in the Telecommunication Technical Committee (TTC) and standards in the PHS-memorandum of understanding (MoU)     

Telecommunications

The telecommunications blueprint for a single Europe after 1992 is examined. This `green paper' is an ambitious three-year-old document in which the European Community's Commission calls for a Western-Europe-wide telecommunications infrastructure based on the integrated-services digital network (ISDN) and other digital communication links. The progress that has been made toward this goal is assessed, showing that progress toward opening national markets and establishing an infrastructure varies greatly from country to country. The highly variable quality of network services throughout Europe presents a further obstacle to unification. Nevertheless, the national segments of a trans-European ISDN system are beginning to emerge, and work on the specific technologies, standards, and regulations for cross-border telecommunications systems are advancing     

Network of the future

Telecommunications networks of the future will exploit two new network architecture concepts that are currently being implemented, or soon will be. These are the Intelligent Network and ISDN, the Integrated Services Digital Network, which together will support a full range of voice, data, and image services that Information Age telecommunications users will demand. These new network architectures, operating synergistically with intelligence in terminal systems, will constitute a framework in which users and service providers will link together standardized functional components to create customized services. These components, along with interfaces and signaling protocols at the interfaces and within the network will result from continuing national and international standardization efforts. In the planning of these new architectures, a few major goals are of paramount importance: • the achievement of a flexible network structure in which functionality is distributed among the network components in a way which supports the timely and economic introduction of new services in response to user needs; • the establishment of industry standards at the interfaces between network elements such that service suppliers can choose among a set of available systems products in building their networks and avoid dependence on a small set of suppliers, • the development of standard user interfaces supporting signaling procedures which can provide the user with increased control of, and access to, services to satisfy his needs; Achievement of these goals will result in the realization of an Open Network Architecture. The ISDN and Intelligent Network architecture concepts are described in this paper.     

电信管理网

阐述了TMN的概念、管理功能和管理业务其及体系结构,并介绍了以我国TMN技术和标准为基础的综合电信管理网的建设情况。认为传统的电信管理网络已不适应现代电信网的管理要求,而由国际电信联盟——电信部(ITU-T)提出的,具有标准协议、接口和结构的电信管理网(TMN)将成为未来电信网管理的基础。     

IN architectures for implementing universal personaltelecommunications

This article focuses on architectures for providing universal personal telecommunications (UPT) service to wireline users. Although UPT services could be provided to users of wireless phones, thereby giving those users personal communication services (PCS), the wireline environment introduces certain important complications. Unlike "smart" cellular phones, which can register themselves and the user automatically, wireline telephones are unable to automatically detect and register a UPT user. UPT therefore includes a manual registration procedure to associate a PTN with the phone where calls will be received or placed. Also, unlike personal communications terminals that are typically used by only one person, wireline phones are likely to be shared among other users. Therefore, the network must keep track of who is using the phone, so it can provide the appropriate telecommunications services. It would be difficult or impossible to implement UPT as a switch-based service. Fortunately, an intelligent network (IN) architecture that is well suited for implementing UPT is being deployed by many local exchange (LECs) and interexchange carriers (IXCs)