Hollow core–shell ZnMn2O4 microspheres as a high-performance anode material for lithium-ion batteries

The hollow core–shell ZnMn₂O₄ microspheres are successfully prepared by a solvothermal carbon templating method and then a annealing process. The crystal phase and particle morphology of resultant ZnMn₂O₄ microspheres are characterized by XRD and TEM. The electrochemical properties of the ZnMn₂O₄ microspheres as an anode material are investigated for lithium ion batteries. The results show that the ZnMn₂O₄ microspheres exhibit a reversible capacity of 855.8 mA h g⁻¹ at a current density of 200 mA g⁻¹ after 50 cycles. Even at 1000 mA g⁻¹, the reversible capacity of the ZnMn₂O₄ microspheres is still kept at 724.4 mA h g⁻¹ after 60 cycles. The enhanced electrochemical performance suggests the promising potential of the hollow core–shell ZnMn₂O₄ microspheres in lithium-ion batteries.     

Unique porous yolk-shell structured Co3O4 anode for high performance lithium ion batteries

This paper introduces a unique porous yolk-shell structured Co₃O₄ microball, which is synthesized by spray pyrolysis from precursor solution with polyvinylpyrrolidone (PVP) additive. PVP acts as an organic template in the pyrolytic reaction facilitating the formation of yolk-shell structure. The electrochemical properties of porous yolk-shell Co₃O₄ microballs evaluated as anode materials for lithium ion batteries exhibit high initial columbic efficiency of 77.9% and high reversible capacity of 1025 mAh g⁻¹ with capacity retention of 98.8% after 150 cycles at 1 A g⁻¹. In contrast, the hollow microballs obtained without PVP addition show obvious capacity decay from 1033 to 748 mAh g⁻¹ after 150 cycles with the capacity retention of 72.3%. In addition, the microballs with porous yolk-shell structure exhibit better rate performance. The superior electrochemical performance is mainly attributed to the unique porous yolk-shell structure which provides large voids to buffer volume expansion and enlarge the contact area with the electrolyte, shortening the diffusion path of the lithium ions.     

Bitter gourd-shaped Ni3V2O8 anode developed by a one-pot metal-organic framework-combustion technique for advanced Li-ion batteries

The present study reports on the one-pot synthesis of Ni₃V₂O₈ (NVO) electrodes by a simple metal organic framework-combustion (MOF-C) technique for anode applications in Li-ion batteries (LIBs). The particle morphology of the prepared NVO is observed to vary as irregular rods, porous bitter gourd and hybrid micro/nano particles depending on the concentration of the framework linker used during synthesis. In specific, the orthorhombic phase and the unique bitter gourd-type secondary structure comprised of agglomerated nanoparticles and porous morphologies is confirmed using powder X-ray diffraction, electron microscopies, X-ray photoelectron spectroscopy and N₂ adsorption–desorption measurements. When tested for lithium batteries as anode, the bitter gourd-type NVO electrode shows an initial discharge capacity of 1362 mA h g⁻¹ and a reversible capacity of 822 mA h g⁻¹ are sustained at a rate of 200 mA g⁻¹ after 100 cycles. Moreover, at 2000 mA g⁻¹, a reversible capacity of 724 mA h g⁻¹ is retained after 500 cycles. Interestingly, the porous bitter gourd-shaped NVO electrode registered significantly high rate performance and reversible specific capacities of 764, 531 and 313 mA h g⁻¹ at high rates of 1, 5 and 10 A g⁻¹, respectively.     

Facile synthesis and electrochemical performance of nitrogen-doped porous hollow coaxial carbon fiber/Co3O4 composite

Economy and efficiency are two important indexes of lithium-ion batteries (LIBs) materials. In this work, nitrogen doped hollow porous coaxial carbon fiber/Co₃O₄ composite (N-PHCCF/Co₃O₄) is fabricated using the fibers of waste bamboo leaves as the template and carbon resource by soaking and thermal treatment, respectively. The N-PHCCF/Co₃O₄ exhibits an outstanding electrochemical performance as anode material for lithium ion batteries, due to the nitrogen doping, coaxial configuration and porous structure. Specifically, it delivers a high discharge reversible specific capacity of 887 mA h g^?1 after 100 cycles at the current density of 100 mA g^?1. Furthermore a high capability of 415 mA h g^?1 even at 1 A g^?1 is exhibited. Most impressively, the whole process is facile and scalable，exhibiting recycling of resource and turning waste into treasure in an eco-friendly way.     

Nb2O5 nanospheres/surface-modified graphene composites as superior anode materials in lithium ion batteries

Uniform Nb₂O₅ nanospheres/surface-modified graphene (SMG) composites for anode materials in lithium ion batteries were synthesized by hydrothermal method. The microstructure and morphology of composites were investigated by X-ray diffraction, scanning electron microscopy and transmission electron microscope techniques. The experimental results showed that Nb₂O₅ nanospheres were tightly and uniformly grown on the surface of SMG nanosheets. Nb₂O₅ nanospheres/SMG composites exhibited an impressive reversible capacity of 404.6 mA h g⁻¹ at the current density of 40 mA g⁻¹ after 100 cycles, and an excellent rate capacity of 345.5 mA h g⁻¹ at the current density of 400 mA g⁻¹.     

Porous nitrogen-doped carbon vegetable-sponges with enhanced lithium storage performance

Porous nitrogen-doped carbon vegetable-sponges (N-DCSs) have been fabricated by chemical treatment of the Cu@C precursors using HNO₃ for the first time. The obtained N-DCSs are porous three-dimensional (3D)-structure and similar to numerous agglomerated fluffy micro-vegetable-sponges. When the precursors are treated by H₂SO₄, carbon vegetable-sponges (CSs) without nitrogen doping are prepared. As anode materials in lithium ion batteries, the as-prepared N-DCSs show improved Li-storage capacity and cycling stability as compared with the pure CSs. They offer 870 mA h g⁻¹ at 0.5 A g⁻¹ after 300 cycles and high reversible capacity with 910 mA h g⁻¹ at 0.2 A g⁻¹ after cycled at different current densities, which are much higher than those of CSs. It is envisaged that the large surface area, unique 3D porous nanostructure and appropriate nitrogen doping are favorable for the superior electrochemical properties of N-DCSs.     

Synthesis and characterization of MnCo2O4 microspheres based air electrode for rechargeable sodium-air batteries

In this work, the nanosized porous MnCo₂O₄ microspheres were synthesized by a hydrothermal method and their electrochemical behaviors were investigated based on a carbon supported composite air electrode for rechargeable sodium-air batteries. Under dry air test condition, the MnCo₂O₄/C air electrode demonstrated a stable working voltage of around 2.1 V vs. Na⁺/Na and a high initial discharge capacity of 7709.4 mA h g⁻¹, based on the active material mass, at a current density of 0.1 mA cm⁻². By a limit on the depth of discharge, the cell exhibited a specific capacity of 1000 mA h g⁻¹ with a high cycling stability up to 130 cycles. The considerable electrocatalytic activity suggests that the as-proposed MnCo₂O₄ is a highly efficient catalyst as air electrode for rechargeable sodium-air batteries.     

3D NiCo2S4 nanorod arrays as electrode materials for electrochemical energy storage application

It is essential to develop new electrode materials for electrochemical energy storage to meet the increasing energy demands, reduce environmental pollution and develop low-carbon economy. In this work, binder-free NiCo₂S₄ nanorod arrays (NCS NRAs) on nickel foam electrodes are prepared by an easy and low energy-consuming route. The electrodes exhibit superior electrochemical properties both for alkaline and Li-ion batteries. In 3 M KOH electrolyte, the NCS NRAs achieve a specific capacity of 240.5 mA h g⁻¹ at a current density of 0.2 A g⁻¹, and 105.7 mA h g⁻¹ after 1500 cycles at the current density of 5 A g⁻¹ with capacity retention of 87.3%. As the anode for LIBs, it shows a high initial capacity of 1760.7 mA h g⁻¹ at the current density of 100 mA g⁻¹, corresponding coulombic efficiency of 87.6%, and a rate capacity of 945 mA h g⁻¹ when the current density is improved 10 times. Hence, the NiCo₂S₄ nanorod arrays are promised as electrode materials with competitive performance.     

Facile synthesis of lithium-vanadium-molybdenum oxide nanocomposite as high-performance anode material for lithium ion batteries

A lithium-vanadium-molybdenum-oxide composite has been prepared by a soft chemical route with mechanical activation assistance followed by low-temperature heat treatment in argon atmosphere. The X-ray diffraction reveals that the synthesized sample is made up of Li₃V(MoO₄)₃ and LiVOMoO₄ crystal phases. The SEM images show the fine particles ~300 nm in size. HRTEM image shows a clear crystal boundary between the two phases. The composite possesses good electrochemical performance as anode material. Particularly, it delivers an initial charge capacity of 927 mAh g⁻¹ at 50 mA g⁻¹ with a high initial coulombic efficiency of 81.2% and maintains 87.8% of its initial capacity after 50 cycles. Even if tested at 1000 mA g⁻¹, it can deliver a reversible capacity of 542 mA h g⁻¹.     

Porous carbon spheres as anode materials for sodium-ion batteries with high capacity and long cycling life

Porous carbon spheres (PCSs) with high surface area were fabricated by the reaction of D-Glucose monohydrate precursor with sodium molybdate dihydrate (Na₂MoO₄·2H₂O) via a facile hydrothermal method followed by carbonization and aqueous ammonia solution (NH₃·H₂O) treatment. The as-prepared PCSs exhibit a highly developed porous structure with a large specific surface area and show an excellent electrochemical performance as anode material of sodium-ion batteries (SIBs). A reversible capacity of 249.9 mA h g⁻¹ after 50 cycles at a current density of 50 mA g⁻¹ and a long cycling life at a high current density of 500 mA g⁻¹ are achieved. The excellent cycling performance and high capacity make the PCSs a promising candidate for long cycling SIBs.     

Synthesis and electrochemical properties of artificial graphite as an anode for high-performance lithium-ion batteries

Artificial graphite containing abundant in situ grown onion-like carbon hollow nanostructures (OCHNs) was prepared from nickel nanoparticles doped pitch and natural graphite flakes by hot-pressing sintering method. Galvanostatic discharge–charge tests indicate that the synthetic graphite with abundant OCHNs exhibits a high specific capacity of 460 mA h g⁻¹ at 20 mA g⁻¹ as well as an excellent rate capability, with a reversible capacity of 220 mA h g⁻¹ at 1 A g⁻¹. Besides the advantages of common graphite anode materials, these superiorities make synthetic graphite a very promising anode for high-performance lithium-ion batteries.     

Ag enhanced electrochemical performance for Na2Li2Ti6O14 anode in rechargeable lithium-ion batteries

Due to the characteristics of an electronic insulator, Na₂Li₂Ti₆O₁₄ always suffers from low electronic conductivity as anode material for lithium storage. Via Ag coating, Na₂Li₂Ti₆O₁₄@Ag is fabricated, which has higher electronic conductivity than bare Na₂Li₂Ti₆O₁₄. Enhancing the Ag coating content from 0.0 to 10.0 wt%, the surface of Na₂Li₂Ti₆O₁₄ is gradually deposited by Ag nanoparticles. At 6.0 wt%, a continuous Ag conductive layer is formed on Na₂Li₂Ti₆O₁₄. While, particle growth and aggregation take place when the Ag coating content reaches 10.0 wt%. As a result, Na₂Li₂Ti₆O₁₄@6.0 wt% Ag displays better cycle and rate properties than other samples. It can deliver a lithium storage capacity of 131.4 mAh g⁻¹ at 100 mA g⁻¹, 124.9 mAh g⁻¹ at 150 mA g⁻¹, 119.1 mAh g⁻¹ at 200 mA g⁻¹, 115.8 mAh g⁻¹ at 250 mA g⁻¹, 111.9 mAh g⁻¹ at 300 mA g⁻¹ and 109.4 mAh g⁻¹ at 350 mA g⁻¹, respectively.     

SnO2 nano-spheres/graphene hybrid for high-performance lithium ion battery anodes

SnO₂ nano-spheres/graphene composite was fabricated via a simple one-step hydrothermal method with graphene oxide and SnCl₄·5H₂O as the precursors. The composite was characterized by X-ray diffraction, field-emission scanning electron microscopy, transmission electron microscopy and surface area measurement. It is shown that fine SnO₂ nano-spheres with an average size of 50–100 nm could be homogeneously deposited on graphene nano-sheets layer by layer. The structural feature enabled SnO₂ nano-spheres/graphene hybird as an excellent anode material in lithium ion battery. The composite possesses 1306 mA h g^?1 of initial discharge capacity and good capacity retention of 594 mA h g^?1 up to the 50th cycle at a current density of 100 mA g^?1. These results indicate that the composite is a promising anode material in high-performance lithium ion batteries.     

Electrochemical presodiation promoting lithium storage performance of Mo-based anode materials

Stabilizing the layer structures of Mo-based anode materials is still a challenge for Li ion batteries. Herein, we proposed an electrochemical presodiation strategy for MoS₂ and MoO₃ to improve their cycling stability. It is interesting to note that the cycling stability of as-treated MoS₂ and MoO₃ was significantly improved. Although the reversible discharge capacity was slightly decreased, the capacity of the pretreated MoS₂ at 300 mA g⁻¹ was retained at 345 mA h g⁻¹ after 100 cycles while that of the pristine one decreased to 151 mA h g⁻¹. The capacity of the pretreated MoO₃ after 60 cycles was also improved from 275 mA h g⁻¹ (the pristine one) to 460 mA h g⁻¹. The stabilizing effect was further verified by scanning electron microscope (SEM) analysis. Electrochemical presodiation here could be a promising modification strategy for Mo-based anode materials.     

Evaluation of reduced graphene oxide-supported NiSb2O6 nanocomposites for reversible lithium storage

NiSb₂O₆ and reduced graphene oxide (NiSb₂O₆/rGO) nanocomposites are successfully fabricated by a solid-state method combined with a subsequent solvothermal treatment and further used as anode material of lithium-ion battery. The NiSb₂O₆/rGO nanocomposites exhibit a higher reversible capacity (of ca. 1240.5 mA h g⁻¹ at a current density of 50 mA g⁻¹), along with a good rate capability (395.2 mA h g⁻¹ at a current density of 1200 mA g⁻¹) and excellent capacity retention (684.5 mA h g⁻¹ after 150 cycles). These good performances could be attributed to the incorporated reduced grapheme oxide, which significantly improves the electronic conductivity of the NiSb₂O₆.     

Investigation of Li5Cr7Ti6O25 as novel anode material for high-power lithium-ion batteries

In this work, Li₅Cr₇Ti₆O₂₅ as a new anode material for rechargeable batteries is fabricated through a simple sol-gel method at different calcination temperatures. The X-ray diffraction, scanning electron microscopy, high resolution transmission electron microscopy, charge/discharge curve and cyclic voltammograms are utilized to study the crystal structures, morphologies and electrochemical properties of as-obtained Li₅Cr₇Ti₆O₂₅ samples. The impact of calcination temperatures on morphologies and electrochemical properties of Li₅Cr₇Ti₆O₂₅ is discussed in detail. The test result shows that the 800 °C is a proper calcination temperature for Li₅Cr₇Ti₆O₂₅ with excellent electrochemical properties. Cycled at 200 mA g⁻¹, it displays a high initial reversible capacity of 146.6 mA h g⁻¹ and retains a considerable capacity of 130.8 mA h g⁻¹ after 300 cycles. Even cycled at large current density of 500 mA g⁻¹, the initial reversible capacity of 129.6 mA h g⁻¹ with the capacity retention of 88% after 300 cycles is achieved, which is obviously higher than that of Li₅Cr₇Ti₆O₂₅ prepared at 700 °C (80.5 mA h g⁻¹ and 68%) and 900 °C (98.4 mA h g⁻¹ and 80%). In addition, in-situ XRD analysis reveals that Li₅Cr₇Ti₆O₂₅ exhibits a reversible structural change during lithiation and delithiation processes. The above prominent electrochemical performance indicates the great potential of the Li₅Cr₇Ti₆O₂₅ obtained at 800 °C as anode material for rechargeable batteries.     

Plasma-polymerized C60 as a functionalized coating layer on fluorine-doped tin oxides for anode materials of lithium-ion batteries

A unique polymerized C₆₀ thin film was functionalized by radio frequency – plasma-assisted thermal evaporation as a passivation layer for the fluorine-doped tin oxide (SnO₂:F) anode of a lithium-ion battery. The plasma-polymerized C₆₀ coated SnO₂:F anode exhibited a high initial discharge capacity of 1255 mAh g⁻¹ at 0.15 mA cm⁻² and increased coulombic efficiency of 98%. These electrochemical improvements were due to the polymerized C₆₀ coating layer, which enhanced the transport of lithium ions on the surface of the active material and mechanically stabilized the anode material during electrochemical cycling.     

Co9S8–carbon composite as anode materials with improved Na-storage performance

The synthesis and electrochemical performance of a composite of Co₉S₈ nanoparticles and amorphous carbon is studied as an anode material for sodium-ion batteries. The Co₉S₈–carbon composite powder was fabricated through a one-pot spray pyrolysis process using thiourea and polyvinylpyrrolidone as sulfur and carbon sources, respectively. The Co₉S₈ nanoparticles are entirely covered by an amorphous carbon layer. The initial discharge and charge capacities of the Co₉S₈–carbon composite powder were 689 and 475 mA h g⁻¹, respectively, at a current density of 0.5 A g⁻¹. The Co₉S₈–carbon composite powders exhibited a stable cyclability with a reversible capacity of 404 mA h g⁻¹ for the 50th cycle and a superior rate capability compared with bare Co_1−xS powder. The improvement of Na-storage performance could be attributed to the small size and entanglement of the Co₉S₈ nanoparticles within the carbon matrix.     

Three-dimensional wire-in-tube hybrids of tin dioxide and nitrogen-doped carbon for lithium ion battery applications

Design and fabrication of tin dioxide/carbon composites with peculiar nanostructures have been proven to be an effective strategy for improving the electrochemical performance of tin dioxide-based anode for lithium-ion batteries, and thus have attracted extensive attention. Herein, we have successfully prepared a uniquely three-dimensional and interweaved wire-in-tube nanostructure of nitrogen-doped carbon nanowires encapsulated into tin dioxide@carbon nanotubes, denoted as NCNW@void@SnO₂@C, via a facile and novel approach for the first time. Interestingly, one-dimension void space located between nitrogen-doped carbon nanowires and innermost wall of tin dioxide@carbon tubes is also formed. The possible formation mechanism of wire-in-tube nanostructure is also discussed and determined by transmission electron microscopy, X-ray diffraction measurement, laser Raman spectroscopy and X-ray photoelectron spectroscopy characterizations. This unique NCNW@void@SnO₂@C fully combines all the advantages of using a three-dimensional architecture, hollow structure, carbon coating, and a mechanically robust carbon nanowires support, thus exhibiting an excellent electrochemical performance as promising anode materials for lithium-ion batteries. A high reversible capacity of 721.3 mAh g⁻¹ can be remained even after 500 cycles at a current density of 200 mA g⁻¹, as well as a capacity of 456.7 mAh g⁻¹ is obtained even at 3000 mA g⁻¹.     

Polymer microsphere-assisted synthesis of lithium-rich cathode with improved electrochemical performance

The Li-rich layered cathode material Li_1.165Mn_0.501Ni_0.167Co_0.167O₂ with porous structure has been successfully synthesized through a facile co-precipitation approach followed with a high-temperature calcination treatment, adopting polymer microsphere (PSA) as a template and conductive agent. The PSA-assisted Li_1.165Mn_0.501Ni_0.167Co_0.167O₂ composite exhibits remarkably improved cycling stability and rate capability compared with the bare composite. It delivers a high initial discharge capacity of 267.0 mA h g⁻¹ at 0.1 C (1 C=250 mA g⁻¹) between 2.0 V and 4.65 V. A discharge capacity of 214.9 mA h g ⁻¹ is still obtained after 100 cycles. Furthermore, the diffusion coefficients of Li⁺ investigated by the cyclic voltammetry technique are approximately 10⁻¹⁵–10⁻¹⁴ cm² s⁻¹. Such outstanding performance is mainly ascribed to: on one hand, the carbon residue of PSA after being calcined at high temperature contributes to enhance the electronic conductivity of the electrode and alleviates the volume changes during the Li⁺-insertion/extraction, leading to an improved rate capability; on the other hand, the unique porous structure and small particle size are conductive to increase the exposed electrochemical active surface, shorten Li⁺ diffusion distance and thus enhance the lithium storage capacity.