Concentration effects on the upconversion luminescence in Ho3+/Yb3+ co-doped NaGdTiO4 phosphor

Ho³⁺/Yb³⁺ co-doped NaGdTiO₄ phosphors were synthesized by a solid-state reaction method. The upconversion (UC) luminescence characteristics excited by 980 nm laser diode were systematically investigated. Bright green UC emission centered at 551 nm accompanied with weak red and near infrared (NIR) UC emissions centered at 652 and 761 nm were observed. The dependence of UC emission intensity on excitation power density showed that all of green, red and NIR UC emissions are involved in two-photon process. The UC emission mechanisms were discussed in detail. Concentration dependence studies indicated that Ho³⁺ and Yb³⁺ concentrations had significant influences on UC luminescence intensity and the intensity ratio of the red UC emission to that of the green one. Rate equations were established based on the possible UC mechanisms and a theoretical formula was proposed to describe the concentration dependent UC emission. The UC luminescence properties of the presented material was evaluated by comparing with commercial NaYF₄:Er³⁺, Yb³⁺ phosphor, and our sample showed a high luminescence efficiency and good color performance, implying potential applications in a variety of fields.     

Visible green upconversion luminescence of Er3+/Yb3+/Li+ co-doped CaWO4 particles

The upconversion (UC) luminescence of Li⁺/Er³⁺/Yb³⁺ co-doped CaWO₄ phosphors is investigated in detail. Single crystallized CaWO₄:Li⁺/Er³⁺/Yb³⁺ phosphor can be obtained, co-doped up to 25.0/5.0/20.0 mol% (Li⁺/Er³⁺/Yb³⁺) by solid-state reaction. Under 980 nm excitation, CaWO₄:Li⁺/Er³⁺/Yb³⁺ phosphor exhibited strong green UC emissions visible to the naked eye at 530 and 550 nm induced by the intra-4f transitions of Er³⁺ (²H_11/2,⁴S_3/2→⁴I_15/2). The optimum doping concentrations of Yb³⁺/Li⁺ for the highest UC luminescence were verified to be 10/15 mol%, and a possible UC mechanism that depends on the pumping power is discussed in detail.     

Color-tunable up-conversion emission from Yb3+/Er3+/Tm3+/Ho3+ codoped KY(MoO4)2 microcrystals based on energy transfer

Tunable up-conversion luminescent material KY(MoO₄)₂: Yb³⁺, Ln³⁺ (Ln=Er, Tm, Ho) has been synthesized by a typical hydrothermal process. Under 980 nm laser diode (LD) excitation, the emission intensity and the corresponding luminescence colors of KY(MoO₄)₂: Yb³⁺, Ln³⁺ (Ln=Er, Tm, Ho) have been investigated in detail. The energy transfer from the Yb³⁺ sensitizer to Ho³⁺, Er³⁺ and Tm³⁺ activators plays an important role in the development of color-tunable single- phased phosphors. The emission intensity keep balance through control of the Ho³⁺ co-doping concentrations, white light was experimentally shown at KY(MoO₄)₂: 20 mol% Yb³⁺, 0.8 mol% Er³⁺, 0.5 mol% Tm³⁺, 1.0 mol% Ho³⁺ phosphor with further calcination at 800 °C for 4 h under 980 nm laser excitation. The color tunability, high quality of white light and high intensity of the emitted signal make these up-conversion (UC) phosphors excellent candidates for applications in solid-state lighting.     

Upconversion emission,cathodoluminescence and temperature sensing behaviors of Yb3+ ions sensitized NaY(WO4)2:Er3+ phosphors

A series of Yb³⁺ ions sensitized NaY(WO₄)₂:Er³⁺ phosphors were synthesized through a solid-sate reaction method. The X-ray diffraction (XRD), upconversion (UC) emission and cathodoluminescence (CL) measurments were applied to characterize the as-prepared samples. Under the excitation of 980 nm light, bright green UC emissions corresponding to (²H_11/2,⁴S_3/2)→⁴I_15/2 transitions of Er³⁺ ions were observed and the UC emission intensities showed an upward trend with increasing the Yb³⁺ ion concentration, achieving its optimum value at 25 mol%. Furthermore, the temperature sensing behavior based on the thermally coupled levels (²H_11/2,⁴S_3/2) of Er³⁺ ions was analyzed by a fluorescence intensity ratio technique. It was found that the obtained samples can be operated in a wide temperature range of 133–773 K with a maximum sensitivity of approximately 0.0112 K⁻¹ at 515 K. Ultimately, strong CL properties were observed in NaY(WO₄)₂:0.01Er³⁺/0.25Yb³⁺ phosphors and the CL emission intensity increased gradually with the increment of accelerating voltage and filament current.     

Efficient near-infrared to visible and ultraviolet upconversion in polycrystalline BiOCl:Er3+/Yb3+ synthesized at low temperature

Er³⁺/Yb³⁺ co-doped BiOCl poly-crystals were synthesized by the conventional solid state method at 500 °C, which exhibited good crystalline and low phonon energy. Under 980 nm excitation, the samples showed intense red upconversion (UC) luminescence (Er³⁺: ⁴F_9/2→⁴I_15/2) as well as other four UC emission bands, including ultraviolet (UV) emission at 380 nm, violet emission at 411 nm, green UC emissions at 525 and 545 nm and near-infrared (NIR) emission between 800 and 850 nm, corresponding to the transitions of ⁴G_11/2, ²H_9/2, ²H_11/2, ⁴S_3/2 and ⁴I_9/2→⁴I_15/2 of Er³⁺, respectively. Interestingly, including the violet and green UC emissions, the red one originated a nearly three-photon process in this system, and a possible UC mechanism was proposed for the enhanced red emission.     

Enhancement of up-conversion emission and emerging cool white light emission in co-doped Yb3+/ Er3+: Li2O-LiF-B2O3-ZnO glasses for photonic applications

A series of co-doped (Yb³⁺/Er³⁺): Li₂O-LiF-B₂O₃-ZnO glasses were prepared by standard melt quenching technique. Structural and morphological studies were carried out by XRD and FESEM. Phonon energy dynamics have been clearly elucidated by Laser Raman analysis. The pertinent absorption bands were observed in optical absorption spectra of singly doped and co-doped Yb³⁺/Er³⁺: LBZ glasses. We have been observed a strong up-conversion red emission pertaining to Er³⁺ ions at 1.0 mol% under the excitation of 980 nm. However, the up-conversion and down conversion (1.53 µm) emission intensities were remarkably enhanced with the addition of Yb³⁺ ions to Er³⁺: LBZ glasses due to energy transfer from Yb³⁺ to Er³⁺. Up-conversion emission spectra of co-doped (Yb³⁺/Er³⁺): LBZ glasses exhibits three strong emissions at 480 nm, 541 nm and 610 nm which are assigned with corresponding electronic transitions of ²H_9/2 → ⁴I_15/2, ⁴S_3/2 → ⁴I_15/2 and ⁴F_9/2 → ⁴I_15/2 respectively. Consequently, the green to red ratio values (G/R) also supports the strong up-conversion emission. The Commission International de E′clairage coordinates and correlated color temperatures (CCT) were calculated from their up-conversion emission spectra of co-doped (Yb³⁺/Er³⁺): LBZ glasses. The obtained chromaticity coordinates for optimized glass (0.332, 0.337) with CCT value at 5520 K are very close to the standard white colorimetric point in cool white region. These results could be suggested that the obtained co-doped (Yb³⁺/Er³⁺): LBZ glasses are promising candidates for w-LEDs applications.     

Down-conversion from Er3+-Yb3+ codoped CaMoO4 phosphor: A spectral conversion to improve solar cell efficiency

The present paper focuses on near infrared (NIR) down-conversion photoluminescence (PL) properties by studying the energy transfer mechanism between Er³⁺ and Yb³⁺ in CaMoO₄:Er³⁺, Yb³⁺ phosphors. We have successfully synthesized a series of Er³⁺ doped and Yb³⁺ codoped CaMoO₄ phosphors by hydrothermal method. The down-conversion of Er³⁺-Yb³⁺ combination with CaMoO₄ phosphor is designed to overcome the energy losses due to spectral mismatch when a high energy photon is incident on the Si-solar cell. The XRD, FESEM, EDX, PL, UV–Vis, Lifetime measurements were carried out to characterize the prepared down-converting phosphors. The crystallinity and surface morphology were studied by X-ray diffraction (XRD) and Field Emission Scanning Electron Microscopy (FESEM) techniques. The down-conversion PL spectra have been studied using 380 nm excitation wavelength. The Er³⁺ doped phosphors exhibit hypersensitive emission at 555 nm in the visible region due to ⁴S_3/2→⁴I_15/2 transition. The addition of Yb³⁺ into Er³⁺ doped CaMoO₄ attribute an emission at 980 nm due to ²F_5/2→²F_7/2 transition. The decrease in emission intensity in visible region and increase in NIR region reveals the energy transfer from Er³⁺ to Yb³⁺ through cross relaxation. The UV–Vis–NIR spectra shows the strong absorption peak around 1000 nm due to Yb³⁺ ion. The lifetime measurement also reveals the energy transfer from Er³⁺ to Yb³⁺ ions. The maximum value of energy transfer efficiency (ETE) and corresponding theoretical internal quantum efficiency are estimated as 74% and 174% respectively.     

Effect of crystalline fraction on upconversion luminescence in Er3+/Yb3+ Co-doped NaYF4 oxyfluoride glass-ceramics

The crystalline fraction were adjusted MgO concentration and the corresponding effect on upconversion (UC) luminescence in Er³⁺/Yb³⁺ co-doped NaYF₄ oxyfluorode glass-ceramics was investigated. With increase of MgO and the content of Na₂O reduced, the internal network structure of the glass became compact, which made the size of NaYF₄ nanocrystals unchanged, while the average distance between the nanocrystals increased significantly. Crystal growth is limited with the glass network, keeping the crystal size not changed. SNM-1 glass ceramics samples show a predominant red up-conversion emission under near infrared excitation at 980 nm, while a predominant green emission is observed in the SNM-3 samples. In this paper, it was indicated that it changed the effect of glass network modifier MgO in the glass structure. The possible mechanism responsible for the color variation of UC in Er³⁺/Yb³⁺ co-doped was discussed.     

Yb3+ concentration on emission color,thermal sensing and optical heater behavior of Er3+ doped Y6O5F8 phosphor

Up-conversion phosphor is a potential candidate as non-contact temperature sensor because of its unjammable and unique detection abilities. In this work, we investigate the influence of Yb³⁺ concentration on the emission color, thermal sensing and optical heater behavior of Er³⁺ doped Y₆O₅F₈ phosphor. Our results show that the emission color of Er³⁺ and Yb³⁺ co-doped Y₆O₅F₈ powder changes from green to yellow with the Yb³⁺ concentration increasing. Importantly, the temperature sensing sensitivities of Er³⁺ and Yb³⁺ co-doped Y₆O₅F₈ powder reach 0.008, 0.009, 0.010 and 0.011 K⁻¹ as the sample doped with 2%, 5%, 8% and 11% Yb³⁺ at 476 K, respectively. Moreover, the temperature of high Yb³⁺ concentration sample shows preferable optical heating behavior, whose temperature is ascended by a large value of 94 K when the excitation pump power density changes from 1.0 to 13.1 W cm⁻². These results suggest Er³⁺ and Yb³⁺ co-doped Y₆O₅F₈ powder has great potential in colorful display, temperature sensing and optical heating.     

Influence of Ce3+ and Gd3+ co-doping on the structure and upconversion emission in hexagonal Ho3+ doped NaYbF4 phosphors

Hexagonal Ho³⁺ doped NaYbF₄ phosphors are synthesized via a hydrothermal method. The influence of Gd³⁺ and Ce³⁺ content on the phase structure and upconversion (UC) emission of NaYbF₄ phosphors is investigated by X-ray diffraction (XRD), transmission electron microscopy (TEM) and UC spectra. The results of XRD and TEM indicate that the solubility of Ce³⁺ in hexagonal NaYbF₄ is low due to the large difference of ionic radius between Ce³⁺ and Yb³⁺. With help of Gd³⁺ co-doping (15 mol%), pure hexagonal NaYbF₄ phosphors with high doping concentration of Ce³⁺ (15 mol%) and small crystal size are obtained. When excited by a 980 nm laser diode, Ho³⁺ doped hexagonal NaYb_0.85Gd_0.15F₄ phosphors exhibit strong green UC emission at 540 nm and weak red one at 646 nm. UC luminescence tuning from green emission to red emission is observed in hexagonal Ho³⁺ doped NaYb_0.85Gd_0.15F₄ phosphors by co-doping with Ce³⁺ ions. The UC luminescence tuning phenomenon is attributed to two resonant energy transfer processes of ⁵S₂/⁵F₄(Ho³⁺)+²F_5/2(Ce³⁺)→⁵F₅(Ho³⁺)+⁵F_7/2(Ce³⁺) and ⁵I₆(Ho³⁺)+²F_5/2(Ce³⁺)→⁵I₇(Ho³⁺⁾+⁵F_7/2(Ce³⁺) between Ho³⁺ and Ce³⁺, which suppress the green emission at 540 nm, while promote the red one at 646 nm.     

Upconverting luminescence based dual-modal temperature sensing for Yb3+/Er3+/Tm3+: YF3 nanocrystals embedded glass ceramic

Yb³⁺/Er³⁺/Tm³⁺ doped transparent glass ceramic containing orthorhombic YF₃ nanoparticles was successfully synthesized by a melt-quenching method. After glass crystallization, tremendously enhanced (about 5000 times) upconversion luminescence, obvious Start-splitting of emission bands as well as long upconversion lifetimes of Er³⁺/Tm³⁺ confirmed the incorporation of lanthanide activators into precipitated YF₃ crystalline environment with low phonon energy. Furthermore, temperature-dependent upconversion luminescence behaviors of glass ceramic were systematically investigated to explore its possible application as optical thermometric medium. Impressively, both fluorescence intensity ratio of Er³⁺: ²H_11/2 → ⁴I_15/2 transition to Er³⁺: ⁴S_3/2 → ⁴I_15/2 one and fluorescence intensity ratio of Tm³⁺: ³F_2,3 → ³H₆ transition to the combined Tm³⁺: ¹G₄ → ³F₄/Er³⁺: ⁴F_9/2 → ⁴I_15/2 ones were demonstrated to be applicable as temperature probes, enabling dual-modal temperature sensing. Finally, the thermal effect induced by the irradiation of 980 nm laser was found to be negligible in the glass ceramic sample, being beneficial to gain intense and precise probing signal and detect temperature accurately.     

Up-conversion luminescence and optical thermometry properties of transparent glass ceramics containing CaF2:Yb3+/Er3+ nanocrystals

A series of Yb³⁺/Er³⁺ codoped transparent oxyfluoride glass ceramics with various amounts of Yb³⁺ have been successfully fabricated and characterized. Under 980 nm laser prompting, the samples produce intense red, green and blue up-conversion emissions, and the emission intensities increase with Yb³⁺ concentration and heat treatment temperature. Before losing good transparency in the visible region, optimum emission intensities are obtained for the sample with 25 mol% of Yb³⁺ at a heat treatment temperature of 680 °C. A possible up-conversion mechanism is proposed from the dependence of emission intensities on pumping power. The fluorescence intensity ratio between the two thermally coupled levels ²H_11/2 versus ⁴S_3/2 was measured with the laser output power of 57 mW to avoid the possible laser induced heating effect. The fluorescence intensity ratio values in the temperature range from 295 K to 723 K can be well fitted with the equation: A exp (−∆E/k_BT), where A = 6.79 and ∆E=876 cm⁻¹. The relative temperature sensitivity at 300 K was evaluated to be 1.4% K⁻¹. All the results suggest that the Yb³⁺/Er³⁺ codoped CaF₂ glass ceramics is an efficient up-conversion material with potential in optical fiber temperature sensing.     

Upconversion emission of ZrO2 nanoparticles doped with erbium (Er3+) and ytterbium (Yb3+), synthesized by hydrothermal route

This paper reports the luminescent response upconversion of zirconium oxide (ZrO₂) nanoparticles doped with erbium (Er³⁺) and ytterbium (Yb³⁺) ions, synthesized by hydrothermal route. X ray diffraction (DRX) showed that the synthesized material presents the face centered cubic (FCC) structure. High resolution transmission electron microscopy (HRTEM) showed the presence of crystals size smaller than 10 nm. The photoluminescent analysis allowed to observe an intense upconversion luminescence emission of the samples doped with both ions Er³⁺ and Yb³⁺, when these are excited with 910 nm laser source, showing the electronic transitions ⁴F_9/2 → ⁴I_5/2; ²H_11/2 → ⁴I_5/2; ⁴S_3/2 → ⁴I_15/2 of Er³⁺. Two decay times were observed, whose behavior can be associated to the average distance between erbium ions within the nanocrystals.     

Color tunable up-conversion emission of ZrO2:Yb3+, Er3+ thin films prepared by chemical solution deposition

The color-tunable up-conversion (UC) emission was observed in ZrO₂:Yb³⁺, Er³⁺ thin films synthesized on fused silica substrates using a chemical solution deposition method. The crystal structure, surface morphology image and optical transmittance of ZrO₂:Yb³⁺, Er³⁺ thin films were detected in the matter of Yb³⁺/Er³⁺ doping content. Under excitation by 980?nm infrared light, intense UC emission can be obtained from ZrO₂:Yb³⁺, Er³⁺ thin films. Photoluminescence study shows that there are two emission bands centered at 548?nm and 660?nm in the UC luminescence spectra, which can be owing to (²H_11/2,⁴S_3/2)→⁴I_15/2 and ⁴F_9/2→⁴I_15/2 transitions of Er³⁺ ions, respectively. In addition, the color coordinate of UC emission between green-red can be tuned by properly adjusting the dopant concentration, because the composition of Yb³⁺/Er³⁺ affect the red/green ratio via the process of cross relaxation and energy back transfer. Our study suggests that ZrO₂:Yb³⁺, Er³⁺ thin films can be considered as promising materials for new photoluminescence devices.     

A Novel Multifunctional Upconversion Phosphor: Yb3+/Er3+ Codoped La2S3

Yb³⁺/Er³⁺ codoped La₂S₃ upconversion (UC) phosphors have been synthesized using high‐temperature solid‐state method. Under 971‐nm excitation, the maximum luminescence power can reach 0.64 mW at the excitation power density of 16 W/cm² and an absolute power yield of 0.36% was determined by an absolute method at the excitation power density of 3 W/cm², and the quantum yield of La₂S₃:Yb³⁺, Er³⁺ (green ~0.18%, red ~0.03%, integration ~0.21) was comparable to that of NaYF₄:Yb³⁺, Er³⁺ nanocrystals (integration ~0.005–0.30). Frequency upconverted emissions from two thermally coupled excited states of Er³⁺ were recorded in the temperature range 100–900 K. The maximum sensitivity of temperature sensing is 0.0075 K^?1. As the excitation power density increases, the temperature of host materials rapidly rises and the top temperature can reach to 600 K. Given the intense UC emission, high sensitivity, as well as good photothermal stability, La₂S₃:Yb³⁺/Er³⁺ phosphor can become a promising composite material for photothermal ablation of cancer cells possessing the functions of temperature sensing and in vivo imaging.     

Structural and luminescence properties of undoped,Nd3+ and Er3+ doped TiO2 nanoparticles synthesized by flame spray pyrolysis method

Bulk and thin film forms of titanium dioxide (TiO₂) have been studied many times due to its very promising optical properties. In this study, low-cost flame spray pyrolysis (FSP) synthesis of Nd³⁺/Er³⁺doped TiO₂ nanoparticles has been reported for the first time. The produced particles were post-annealed after FSP process at 550 °C in order to obtain crystalline structure. The phase and elemental analysis of the produced materials were performed by X-Ray Diffraction (XRD) and X-Ray Photoelectron Spectroscopy (XPS), respectively. The surface morphology, accurate size and specific surface area of the primary particles were identified using scanning electron microscopy (SEM) and particle size analyser. Luminescent properties of the produced nanoparticles were investigated by steady state and time resolved fluorescence spectra. Doping of TiO₂ nanoparticles with the rare earths of Nd³⁺and Er³⁺resulted in visible and near-infrared light emission when excited at 364 nm. The utilized nanoparticles yielded bi-and tri-exponential decay curves. Additionally, they exhibited typical upconversion luminescence when radiated by 810 nm.     

Near-infrared luminescent properties and natural lifetime calculation of a novel Er3+ complex

In this communication, a novel Er³⁺ complex Er(PT)₃TPPO [PT = 1-phenyl-3-methyl-4-tert-butylbenzoyl-5-pyrazolone, TPPO = triphenyl phosphine oxide] is successfully synthesized and characterized by elemental analysis and single-crystal X-ray diffraction. Its optical properties and the energy transfer process from the ligand PT to the Er³⁺ ion are investigated, the typical near-infrared (NIR) luminescence (centered at around 1530 nm) is attributed to the ⁴I_13/2 → ⁴I_15/2 transition of Er³⁺ ion which results from the efficient energy transfer from PT to Er³⁺ ion (an antenna effect). The wider full width at half maximum (78 nm) peaked at 1530 nm in the emission spectrum and the Judd–Ofelt theory calculation on the radiative properties suggest that Er(PT)₃TPPO should be a promising candidate for tunable lasers and planar optical amplifiers.     

Electrical properties and light up conversion effects in Bi3.79Er0.03Yb0.18Ti3−xWxO12 ferroelectric ceramics

Modified ceramic compositions of Bi_3.79Er_0.03Yb_0.18Ti_3−xW_xO₁₂ with fixed Er and Yb content, and a varying W content (x=0.0, 0.01, 0.03, 0.06 and 0.10) are prepared. The site selectivity of Er³⁺, Yb³⁺, and W⁶⁺ cations is analyzed, and their influence on the electrical and light up conversion properties is studied. Formation of single phase orthorhombic structure is confirmed with enhanced grain growth up to x=0.03, and for (x≥0.04–0.10) the grain growth is inhibited, and the orthorhombic distortion is relaxed. Raman spectroscopy reveals W⁶⁺ cation substitutes preferentially at the B-site replacing Ti⁴⁺ ions in the Bi₄Ti₃O₁₂ lattice structure. Increasing W⁶⁺ donor concentration reduces the conductivity effects by lowering the oxygen vacancies. Reduced dielectric losses (tan δ=0.003) and dispersion with frequency in the range (10⁻²–10 Hz) are observed, and improvements in the remnant polarization (2P_r=28.86 μC/cm²) are seen up to an optimum content of x=0.03. At higher W content (x>0.03), the properties tend to degrade due to structural relaxation and microstructural changes. Up conversion photoluminescence (UC-PL) under 980 nm excitation shows strong emission in the green and red bands due to enhanced crystal field around the Er³⁺ ions for an optimum W content of x=0.06. A weak blue emission band around (~492 nm) is observed by cooperative emission (CE) due to radiative relaxation of an excited Yb–Yb pair from a virtual level. Variation of UC emission intensity with pump-power confirms a two-photon mechanism for the up conversion process.     

Spectral pure RGB up-conversion emissions in self-assembled Gd2O3: Yb3+, Er3+/Ho3+/Tm3+ 3D hierarchical architectures

Self-assembled three-dimensional Yb³⁺(Ln = Er, Ho, Tm) co-doped Gd₂O₃ up-converted (UC) phosphors were synthesized by a facile co-precipitation method, and their morphologies and microstructures were investigated by scanning electron microscope (SEM) and transmission electron microscope (TEM) analysis. Under the excitation at 980 nm, spectral pure three primary colors red, green and blue (RGB) emissions were respectively achieved in Yb³⁺/Er³⁺, Yb³⁺/Ho³⁺ and Yb³⁺/Tm³⁺ co-doped Gd₂O₃ phosphors, in which spectral color purities were tuned by adjusting the doping concentration, annealing temperature, excitation power density and the pulse-width of 980 nm laser. These results provide deeper insights into modulating spectral color purities of up-converted emission, and the potential applications of spectrally pure RGB up-converted materials in fingerprint recognition and multi-color printing were also investigated.     

Up-conversion emission color tuning in NaLa(MoO4)2: Nd3+/Yb3+/Ho3+ excited at 808 nm

As alternatives to Yb³⁺-sensitized up-conversion (UC) materials excited at 980 nm, Nd³⁺-sensitized UC phosphors irradiated by 808 nm have been used to decrease the absorption of water and alleviate the overheating effect in vivo biological application. Intense red and green UC emissions from ⁵F₅→⁵I₈ and ⁵F₄/⁵S₂→⁵I₈ transitions of Ho³⁺ appeared in Nd³⁺/Yb³⁺/Ho³⁺ tri-doped NaLa(MoO₄)₂ through successive energy transfer Nd³⁺→Yb³⁺→Ho³⁺ under 808 nm excitation, in which Yb³⁺ ions were proven to be the energy transfer bridge between Nd³⁺ and Ho³⁺ by lifetime measurement. The variable emission color and intensity ratios of red to green emissions were realized by adjusting the doping concentration of Yb³⁺, pulse width of the excitation laser and the addition of Ce³⁺ ion, which depends on the different population pathways to the green and red emitting states of Ho³⁺. The chromaticity modulation mechanisms of these approaches were proposed, which provides a feasible strategy to tune the UC emission color.