Modification of pristine multiwalled carbon nanotube by grafting with poly(methyl methacrylate) using benzoyl peroxide initiator

Multiwalled carbon nanotube was successfully grafted with poly(methyl methacrylate) by free radical mechanism using benzoyl peroxide initiator. The reaction was carried out in situ, where the initiator and methyl methacrylate monomer generated the polymer‐free radical that was subsequently grafted to the surface of the pristine multiwalled carbon nanotube. The multiwalled carbon nanotube grafted poly(methyl methacrylate) (MWCNT‐g‐PMMA) were characterized using Fourier transform infrared, differential scanning calorimetry, thermogravimetric analysis, ¹³ C‐solid NMR spectroscopy, X‐ray photoelectron spectroscopy, and scan electron microscopy. From the result of the characterizations, the grafting of poly(methyl methacrylate) on to multiwalled carbon nanotube was confirmed, and a percentage grafting of 41.51% weight was achieved under optimized conditions with respect to the temperature and the amount of the initiator. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43270.     

Photografting of PVC containing N,N‐diethyldithiocarbamate groups with vinyl monomers

Poly(vinyl chloride) (PVC) with pendent N,N‐diethyldithiocarbamate groups (PVC–SR) was prepared through the reaction of PVC with sodium N,N‐diethyldithiocarbamate (NaSR) in butanone and used as a photoinitiator for the grafting polymerization of three vinyl monomers [styrene (St), methyl methacrylate (MMA), and acrylamide (Am)]. The effects of ultraviolet (UV) irradiation time, PVC–SR amount, and the monomer amount on grafting and grafting efficiency were investigated. The results showed that PVC–SR could initiate the polymerization of three vinyl monomers effectively and obtained crosslinked copolymers. The grafting and grafting efficiency of styrene and methyl methacrylate were higher than those of acrylamide. The polymerization activity of three monomers was acrylamide > methyl methacrylate > styrene. By analyzing the UV spectrum of PVC–SR with a different irradiation time, it was confirmed that PVC–SR was dissociated mainly into macromolecular the sulfur radical PVC–S · and the small molecular carbon radical · C(S)N(C₂H₅)₂; the grafting polymerization mechanism was discussed. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 77: 2569–2574, 2000     

Synthesis of poly(epichlorohydrin‐g‐methyl methacrylate) graft copolymers by the combination of cationic and atom transfer radical polymerization

Poly(epichlorohydrin) possessing chloromethyl side groups in the main chain was used in the atom transfer radical polymerization of methyl methacrylate and styrene to yield poly(epichlorohydrin‐g‐methyl methacrylate) and poly(epichlorohydrin‐g‐styrene graft copolymers. The polymers were characterized by ¹H NMR spectroscopy, gel permeation chromatography, differential scanning calorimetry, and fractional precipitation method. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 2725–2729, 2006     

Novel synthesis of poly(methyl methacrylate) brush encapsulated silica particles

Silica (SiO₂)‐crosslinked polystyrene (PS) particles possessing photofunctional N,N‐diethyldithiocarbamate (DC) groups on their surface were prepared by the free‐radical emulsion copolymerization of a mixture of SiO₂ (diameter = 20 nm), styrene, divinyl benzene, 4‐vinylbenzyl N,N‐diethyldithiocarbamate (VBDC), and 2‐hydroxyethyl methacrylate with a radical initiator under UV irradiation. In this copolymerization, the inimer VBDC had the formation of a hyperbranched structure by a living radical mechanism. The particle sizes of such core–shell structures [number‐average particle diameter (D_n) = 35–40 nm] were controlled by the variation of the feed amounts of the monomers and surfactant, or emulsion system. The size distributions were relatively narrow (weight‐average particle diameter/D_n ≈ 1.05). These particles had DC groups on their surface. Subsequently, poly(methyl methacrylate) brush encapsulated SiO₂ particles were synthesized by the grafting from a photoinduced atom transfer radical polymerization approach of methyl methacrylate initiated by SiO₂‐crosslinked PS particles as a macroinitiator. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Architecture of colloidal crystals constructed by silica hybrid nanoparticles

Silica (SiO₂)‐crosslinked polystyrene (PS) particles possessing photofunctional N,N‐diethyldithiocarbamate (DC) groups on their surface were prepared by the free‐radical emulsion copolymerization of a mixture of SiO₂ (diameter D_n = 192 nm), styrene, divinyl benzene, 4‐vinylbenzyl N,N‐diethyldithiocarbamate (VBDC), and 2‐hydroxyethyl methacrylate with a radical initiator under UV irradiation. In this copolymerization, the inimer VBDC had the formation of a hyperbranched structure by a living radical mechanism. These particles had DC groups on their surface. Subsequently, poly(methyl methacrylate) brushes encapsulated SiO₂ particles were synthesized by the grafting from a photoinduced atom transfer radical polymerization (ATRP) approach of methyl methacrylate initiated by SiO₂‐crosslinked PS particles as a macroinitiator. We constructed the colloidal crystals using these photofunctional particles. Moreover, the SiO₂ particle array of colloidal crystals was locked by radical photopolymerization with vinyl monomer as a matrix. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Relationship between electrical and mechanical loss tangents of hollow glass powder reinforced epoxy composites: A pilot study

This study was focused on the synthesis of monodisperse poly(n‐butyl methacrylate‐co‐methyl methacrylate) submicrospheres via soap‐free emulsion polymerization and on their characterization. The glass‐transition temperatures of poly(n‐butyl methacrylate) and poly(methyl methacrylate) were approximately 25 and 110°C, respectively. Therefore, submicrospheres with different glass‐transition temperatures could be obtained through the variation of the copolymer composition. In addition, relationships between the monomer feed concentration (M₀) and the Mark–Houwink constant (α) for the copolymer submicrospheres were proposed. The molecular weights of the copolymer submicrospheres decreased sharply with an increase in the weight fraction of n‐butyl methacrylate. On the contrary, the particle diameter increased linearly from 277 to 335 nm with an increase in the weight fraction of n‐butyl methacrylate. The α values decreased with an increase in M₀, and this indicated that the branched structures of the copolymer submicrospheres were easily obtained when M₀ was higher than 0.11 g/mL of water. Consequently, the results of this study are expected to provide useful information for the synthesis of monodisperse copolymer submicrospheres by soap‐free emulsion polymerization. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Effects of the cosurfactant 1‐butanol and feed composition on nanoparticle properties produced by microemulsion copolymerization of styrene and methyl methacrylate

The concentration of the cosurfactant 1‐butanol (BuOH) determined the polymer weight and size for a series of poly(styrene‐co‐methyl methacrylate)s (P(St‐co‐MMA)) synthesized by the free‐radical (o/w) microemulsion technique. A factorial design established the levels of the experimental conditions for the polymerization i.e., concentration of the surfactant, sodium dodecyl sulfate (SDS); concentration of the cosurfactant, BuOH; temperature and ratio of the styrene (St) to methyl methacrylate (MMA). An increase in the weight‐average molecular weight (M_w) and number‐average molecular weight (M_n) was observed in the P(St‐co‐MMA) series with an increase in BuOH concentration from 1 to 5 wt %. These effects could arise from the micellar aggregation induced by interfacial BuOH. The unique micellar conditions could be exploited to synthesize copolymers of varying molecular weight and size. Additionally, the composition of the copolymers was virtually templates of the feed composition. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2008     

Decreasing miscibility with greater heterogeneity in ternary polymer blend: poly(cyclohexyl methacrylate), poly(α‐methyl styrene) and poly(4‐methyl styrene)

A ternary blend system comprising poly(cyclohexyl methacrylate) (PCHMA), poly(α‐methyl styrene) (PαMS) and poly(4‐methyl styrene) (P4MS) was investigated by thermal analysis, optical and scanning electron microscopy. Ternary phase behaviour was compared with the behaviour for the three constituent binary pairs. This study showed that the ternary blends of PCHMA/PαMS/P4MS in most compositions were miscible, with an apparent glass transition temperature (T_g) and distinct cloud‐point transitions, which were located at lower temperatures than their binary counterparts. However, in a closed‐loop range of compositions roughly near the centre of the triangular phase diagram, some ternary blends displayed phase separation with heterogeneity domains of about 1 µm. Therefore, it is properly concluded that ternary PCHMA/PαMS/P4M is partially miscible with a small closed‐loop immisciblity range, even though all the constituent binary pairs are fully miscible. Thermodynamic backgrounds leading to decreased miscibility and greater heterogeneity in a ternary polymer system in comparison with the binary counterparts are discussed. © 2003 Society of Chemical Industry     

Synthesis and thermal properties of poly(methyl methacrylate)‐poly(L‐lactic acid)‐poly(methyl methacrylate) tri‐block copolymer

Poly(methyl methacrylate)‐poly(L ‐lactic acid)‐poly(methyl methacrylate) tri‐block copolymer was prepared using atom transfer radical polymerization (ATRP). The structure and properties of the copolymer were analyzed using infrared spectroscopy, gel permeation chromatography, nuclear magnetic resonance (¹H‐NMR, ¹³C‐NMR), thermogravimetry, and differential scanning calorimetry. The kinetic plot for the ATRP of methyl methacrylate using poly(L ‐lactic acid) (PLLA) as the initiator shows that the reaction time increases linearly with ln[M]₀/[M]. The results indicate that it is possible to achieve grafted chains with well‐defined molecular weights, and block copolymers with narrowed molecular weight distributions. The thermal stability of PLLA is improved by copolymerization. A new wash‐extraction method for removing copper from the ATRP has also exhibits satisfactory results. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Preparation and characterizaton of poly(dimethyl amino ethyl methacrylate) modified poly(vinyl alcohol) membrane by UV radiation for the permeation of 5‐fluorouracil

Poly(vinyl alcohol) was modified by UV radiation with dimethyl amino ethyl methacrylate (DMAEMA) monomer to get poly(dimethyl amino ethyl methacrylate) modified poly(vinyl alcohol) (PVADMAEMA) membrane. The PVADMAEMA membranes were characterized by Fourier transform infrared spectroscopy. The tensile strength and elongation of PVADMAEMA membranes were measured by Universal Testing Machine. The results of X‐ray diffraction (XRD) and differential scanning calorimetry (DSC) showed that (1) the crystalline area in PVADMAEMA decreased with increasing the content of poly(dimethyl amino ethyl methacrylate) in the membrane. (2) Only one glass transition temperature (T_g) was found for the various PVADMAEMA membranes. It means that poly(dimethyl amino ethyl methacrylate) and PVA are compatible in PVADMAEMA membrane. (3)The T_g of the membrane is reduced with increasing the content of poly(dimethyl amino ethyl methacrylate) in the membrane. The water content on the PVADMAEMA membranes was determined. It was found that the water content on the PVADMAEMA membrane increased with increasing the content of poly(dimethyl amino ethyl methacrylate). The changes of properties enhanced the permeability of 5‐Fluorouracil (5‐Fu) through the PVADMAEMA membranes. A linear relationship between the permeability and the weight percent of poly(dimethyl amino ethyl methacrylate) in the PVADMAEMA membrane is found. It is expressed as P (cm/s) = (9.6 ± 0.4) × 10^?5 + (8.8 ± 0.6) × 10^?5 W _x , where P is the permeability of 5‐Fu through the membrane and W_x is the weight percent of poly(dimethyl amino ethyl methacrylate) in the PVADMAEMA membrane. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Low protein fouling polypropylene membrane prepared by photoinduced reversible addition‐fragmentation chain transfer polymerization

In this study, 2‐hydroxyethyl methacrylate and N‐isopropyl acrylamide was block grafted onto the polypropylene macroporous membrane surface by photo‐induced reversible addition‐fragmentation chain transfer (RAFT) radical polymerization with benzyl dithiobenzoate as the RAFT agent. The degree of grafting of poly(2‐hydroxyethyl methacrylate) on the membrane surface increased with UV irradiation time and decreased with the chain transfer agent concentration increasing. The poly(2‐hydroxyethyl methacrylate)‐ grafted membranes were used as macro chain transfer agent for the further block graft copolymerization of N‐isopropyl acrylamide in the presence of free radical initiator. The degree of grafting of poly(N‐isopropyl acrylamide) increased with reaction time. Furthermore, the poly(2‐hydroxyethyl methacrylate)‐ grafted membrane with a degree of grafting of 0.48% (wt) showed the highest relative pure water flux and the best antifouling characteristics of protein dispersion. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Preparation of small-sized carboxylated latexes by emulsion polymerization using alkali-soluble random copolymer

Alkali-soluble random copolymer (ASR), poly(styrene/α-methylstyrene/acrylic acid) [M_n: 4,300; acid number: 190], was used as a polymeric emulsifier in the emulsion polymerization of styrene and methyl methacrylate, respectively. ASR containing a large number of carboxyl groups could form aggregates like micelles, and the solubilization ability of the aggregates was dependent on the neutralization degree of ASR. The polystyrene latexes prepared using ASR showed the small particle size (ca. 40 nm) and monodispersed particle size distribution. On the other hand, the particle size distribution of poly(methyl methacrylate) latexes became broader as the neutralization of ASR increased. This could be explained by the effects of water solubility of the monomer and the neutralization degree of ASR on particle formation. Thin layer chromatography/flame ionization detector analysis confirmed that the grafting reaction of polystyrene to ASR occurred during emulsion polymerization. The ζ potentials of final latexes showed high values due to ASR that was adsorbed and grafted on the surface of the latex particle. © 1998 John Wiley & Sons, Inc. J Appl Polym Sci 69: 543–550, 1998     

Synthesis and characterization of poly(methyl methacrylate)‐grafted silica microparticles

A procedure to synthesize poly(methyl methacrylate)‐grafted silica microparticles was developed by using radical photopolymerization of methyl methacrylate (MMA) initiated from N,N‐diethyldithiocarbamate (DEDT) groups previously bound to the silica surface (grafting “from”). The functionalization of silica microparticles with DEDT groups was performed in two steps: introduction of chlorinated functions onto the surface of silica particles, and then nucleophilic substitution of chlorines by DEDT functions via a S_N2 mechanism. The study was performed with a Kieselgel® S silica which was initially chlorinated in surface, either by direct chlorination of silanols with thionyl chloride, or by using a condensation reaction between silanols and a chlorofunctional trialkoxysilane reagent, 4‐(chloromethyl)phenyltrimethoxysilane and chloromethyltriethoxysilane, respectively. Three types of DEDT‐functionalized silica microparticles were prepared with a good control of the reactions, and then characterized by solid‐state ¹³C and ²⁹Si CP/MAS NMR. Their ability to initiate MMA photopolymerization was studied. The kinetics of MMA photopolymerization was followed by HPLC and ¹H‐NMR. Whatever the silica used the grafting progresses very slowly. On the other hand, the conversion of MMA in PMMA grafts is depending on the structure of the DEDT‐functionalized Kieselgel® S used. Poly(methyl methacrylate)‐grafted silica microparticles bearing high length grafts ( about 100) were synthesized. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Graft copolymerization studies. III. Methyl methacrylate onto polypropylene and polyethylene terephthalate

The tert‐butoxy radical‐facilitated grafting of methyl methacrylate (MMA) onto commercial polypropylene (PP) pellets and fiber was investigated in heterogeneous conditions similar to practical systems. Free‐radical grafting of several other monomers onto PP fiber was also investigated. Also, preliminary data from the grafting of MMA onto poly(ethylene terephthalate) pellets is presented. The PP‐graft‐PMMA residues were detected by solid‐state ¹³C‐NMR and photoacoustic IR spectroscopy. There was a good correlation between the degree of grafting (DG) determined from these spectroscopic techniques and the results from gravimetric methods. A maximum grafting efficiency of over 50% was found, whereas DG (20%) remained constant at various PP pellet, initiator, and monomer concentrations. However, at relatively low PP fiber concentrations, the DG was 27%; the increase was most likely due to the greater surface area of the fiber. There was also a reduction in DG (14%) at relatively low initiator concentrations. The reaction conditions were altered to favor grafting by the addition of more polymer substrate. When the ratio of tert‐butoxy radicals to PP was decreased, more of the substrate remained unmodified, and empirical calculations showed the formation of grafts with up to 40 monomer units. At high initiator concentrations, calculations showed that the graft residues were 1–2 units long. Therefore, variation of the polymer, initiator, and monomer concentrations was shown to have a significant effect on grafting. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 898–915, 2002     

A facile strategy for the functionalization of poly[cyclotriphosphazene‐co‐(4,4′‐sulfonyldiphenol)] materials

Recently, a new type of phosphazene‐containing material, poly[cyclotriphosphazene‐co‐(4,4′‐sulfonyldiphenol)] (PZS), was successfully prepared. PZS materials including PZS nanotubes, PZS nanofibers and PZS microspheres show excellent thermal stability, biocompatibility and biodegradability. Moreover, PZS‐containing materials such as silver nanowire/PZS, carbon nanotube/PZS and Fe₃O₄/PZS nanotubes have also been prepared. Therefore, we explored a specific method for the functionalization of these PZS and PZS‐containing materials to expand their scope of application. As a model of various PZS and PZS‐containing materials, PZS microspheres (PZSMs) were functionalized via surface‐initiated atom transfer radical polymerization (ATRP). Polymerization of styrene occurred at surface sites covalently derivatized with ATRP initiators to form PZSM–polystyrene. The number‐average molecular weight (M_n) of grafted polymer chains could be well controlled. Furthermore, PZSM–polystyrene was still active for further block copolymerization of methyl methacrylate. Both styrene‐ and acrylate‐type monomers could be directly polymerized or block copolymerized from the surface of PZS and PZS‐containing materials using surface‐initiated ATRP. M_n of grafted polymer chains could be well controlled. This facile strategy could pave the way for a wider range of applications of these materials. Copyright © 2010 Society of Chemical Industry     

The influence of the internal structure of core–shell particles on poly(vinyl chloride)/(methyl methacrylate–butadiene–styrene) blends

Methyl methacrylate–butadiene–styrene (MBS) core–shell particles were prepared by grafting styrene and methyl methacrylate onto polybutadiene seeds via emulsion polymerization. All the MBS particles were designed with the same chemical composition, similar grafting degree but different internal structures. The difference in internal structure was realized by controlling the ratio of ‘external grafting’ and ‘internal grafting’ of styrene. The work focused on the influence of the internal structure of MBS core–shell particles on the properties of poly(vinyl chloride)/MBS blends. From transmission electron microscopy, three different internal structures were observed: rare sub‐inclusions, a large number of small sub‐inclusions and large sub‐inclusions. The results of dynamic mechanical analysis illustrated that the different internal structures greatly affected the glass transition temperature T_g of the rubber phase and the storage modulus of the core–shell particles. The notched Izod impact test results showed that the MBS with large sub‐inclusions had the lowest brittle–ductile transition temperature, while the transparency test revealed that the presence of sub‐inclusions in the rubbery phase reduced the transparency of the blend. Copyright © 2012 Society of Chemical Industry     

Atom transfer radical polymerization of methyl methacrylate initiated with a macroinitiator of poly(vinyl acetate)

Well‐defined poly(vinyl acetate‐b‐methyl methacrylate) block copolymers were successfully synthesized by the atom transfer radical polymerization (ATRP) of methyl methacrylate (MMA) in p‐xylene with CuBr as a catalyst, 2,2′‐bipyridine as a ligand, and trichloromethyl‐end‐grouped poly(vinyl acetate) (PVAc–CCl₃) as a macroinitiator that was prepared via the telomerization of vinyl acetate with chloroform as a telogen. The block copolymers were characterized with gel permeation chromatography, Fourier transform infrared, and ¹H‐NMR. The effects of the solvent and temperature on ATRP of MMA were studied. The control over a large range of molecular weights was investigated with a high [MMA]/[PVAc–CCl₃] ratio for potential industry applications. In addition, the mechanism of the polymerization was discussed. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 1089–1094, 2006     

Study on the synthesis of heat‐resistant PMMA

N‐cyclohexylmaleimide (CHMI) and styrene (St) were used to copolymerize with methyl methacrylate (MMA) to synthesize heat‐resistant poly(methyl methacrylate) (PMMA) by a solution copolymerization method and a suspension copolymerization method. Residual CHMI concentrations in the copolymers were analyzed by gas chromatography. Effects of styrene on residual CHMI concentration, glass transition temperature (T_g), molecular weight, and molecular weight distribution were studied. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 72: 1335–1339, 1999     

Effect of poly(styrene‐co‐maleic anhydride) imidization on the miscibility and phase‐separation temperatures of poly(styrene‐co‐maleic anhydride)/poly(vinyl methyl ether) and poly(styrene‐co‐maleic anhydride)/ poly(methyl methacrylate) blends

The objective of this work was to study the miscibility and phase‐separation temperatures of poly(styrene‐co‐maleic anhydride) (SMA)/poly(vinyl methyl ether) (PVME) and SMA/poly(methyl methacrylate) (PMMA) blends with differential scanning calorimetry and small‐angle light scattering techniques. We focused on the effect of SMA partial imidization with aniline on the miscibility and phase‐separation temperatures of these blends. The SMA imidization reaction led to a partially imidized styrene N‐phenyl succinimide copolymer (SMI) with a degree of conversion of 49% and a decomposition temperature higher than that of SMA by about 20°C. We observed that both SMI/PVME and SMI/PMMA blends had lower critical solution temperature behavior. The imidization of SMA increased the phase‐separation temperature of the SMA/PVME blend and decreased that of the SMA/PMMA blend. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Effect of in situ polymerization conditions of methyl methacrylate on the structural and morphological properties of poly(methyl methacrylate)/poly(acrylonitrile‐g‐(ethylene‐co‐propylene‐co‐diene)‐g‐styrene) PMMA/AES Blends

In this study, the structural and morphological properties of poly(methyl methacrylate)/poly(acrylonitrile‐g‐(ethylene‐co‐propylene‐co‐diene‐g‐styrene) (PMMA‐AES) blends were investigated with emphasis on the influence of the in situ polymerization conditions of methyl methacrylate. PMMA‐AES blends were obtained by in situ polymerization, varying the solvent (chloroform or toluene) and polymerization conditions: method A—no stirring and air atmosphere; method B—stirring and N₂ atmosphere. The blends were characterized by infrared spectroscopy (FTIR), transmission electron microscopy (TEM), and dynamic mechanical analysis (DMA). The results showed that the PMMA‐AES blends are immiscible and present complex morphologies. This morphology shows an elastomeric dispersed phase in a glassy matrix, with inclusion of the matrix in the elastomer domains, suggesting core shell or salami morphology. The occlusion of the glassy phase within the elastomeric domains can be due to the formation of graft copolymer and/or phase inversion during polymerization. However, this morphology is affected by the polymerization conditions (stirring and air or N₂ atmosphere) and by the solvent used. The selective extraction of the blends' components and infrared spectroscopy showed that crosslinked and/or grafting reactions occur on the elastomer chains during MMA polymerization. The glass transition of the elastomer phase is influenced by morphology, crosslinking, and grafting degree and, therefore, T_g depends on the polymerization conditions. On the other hand, the behavior of T_g of the glassy phase with blend composition suggests miscibility or partial miscibility for the SAN phase of AES and PMMA. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012