Edge‐functionalized graphene nanoplatelets with polystyrene by atom transfer radical polymerization: grafting through carboxyl groups

The surface modifier 3‐((4‐hydroxybutoxy)dimethylsilyl)propyl methacrylate (CD), which contains a double bond and a hydroxyl group, was synthesized through a coupling reaction of 1,4‐butanediol and (3‐methacryloxypropyl)dimethylchlorosilane. Subsequently, graphene oxide (GO) was functionalized with different amounts of CD from its edge carboxyl groups. Then, grafting through atom transfer radical polymerization of styrene in the presence of various amounts of the edge‐functionalized GO was carried out to evaluate the effect of graphene loading along with graft density. A peak at 3.8 ppm in the ¹H NMR spectrum of CD associated with the methylene adjacent to the Si–O group indicated a successful coupling reaction. Attachment of CD on the edges of GO was evaluated using X‐ray photoelectron and Fourier transform infrared spectroscopies. Expansion of GO interlayer spacing by functionalization was evaluated using X‐ray diffraction. The ordered and disordered crystal structure of carbon was studied using Raman spectroscopy. The close I_D/I_G values for GO and various kinds of functionalized graphenes show the preserved graphitic crystallite size. Relaxation behaviour of polystyrene chains in the presence of graphene nanoplatelets and also the effect of graft content on chain confinement were studied using differential scanning calorimetry. High‐graft‐density nanocomposites show higher glass transition temperatures. Morphology of graphene nanoplatelets was studied using scanning electron and transmission electron microscopies. The flat and smooth morphology of graphene nanoplatelets is disturbed and also the transparency of the nanoplatelets decreases during the oxidation and functionalization processes. © 2014 Society of Chemical Industry     

Synthesis and properties of click coupled graphene oxide sheets with three‐dimensional macromolecules

A facile click chemistry approach to the functionalization of three‐dimensional hyperbranched polyurethane (HPU) to graphene oxide (GO) nanosheets is presented. HPU‐functionalized GO samples of various compositions were synthesized by reacting alkyne‐functionalized HPU with azide‐functionalized GO sheets. The morphological characterization of the HPU‐functionalized GO was performed using transmission electron microscopy and its chemical characterization was carried out using Fourier transform‐infrared spectroscopy, nuclear magnetic resonance spectroscopy, and X‐ray photoelectron spectroscopy. The graphene sheet surfaces were highly functionalized, leading to improved solubility in organic solvents, and consequently, enhanced mechanical, thermal, and thermoresponsive and photothermal shape memory properties. The strategy reported herein provides a very efficient method for regulating composite properties and producing high performance materials. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43358.     

Epoxy/p‐phenylenediamine functionalized graphene oxide composites and evaluation of their fracture toughness and tensile properties

In an attempt to enhance the mechanical properties of epoxy/graphene‐based composites, the interface was engineered through the functionalization of graphene oxide (GO) sheets with p‐phenylenediamine; this resulted in p‐phenylenediamine functionalized graphene oxide (GO–pPDA). The morphology and chemical structure of the GO–pPDA sheets were studied by spectroscopic methods, thermal analysis, X‐ray diffraction, and transmission electron microscopy. The characterization results show the successful covalent functionalization of GO sheets through the formation of amide bonds. In addition, p‐phenylenediamine were polymerized on graphene sheets to form crystalline nanospheres; this resulted in a GO/poly(p‐phenylenediamine) hybrid. The mechanical properties of the epoxy/GO–pPDA composite were assessed. Although the Young's modulus showed improvement, more significant improvements were observed in the strength, fracture strain, and plane‐strain fracture toughness. These improvements were attributed to the unique microstructure and strong interface between GO–pPDA and the epoxy matrix. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43821.     

Coupling hybrid of graphene oxide and layered zirconium phosphonate to enhance phenolic resin–based friction materials

A two‐dimensional (2D) heterogeneous coupling nanoparticle composed of graphene oxide and zirconium phosphonate (GO‐ZrP) was synthesized layer by layer in a self‐assembly manner. A rigid layer of zirconium phosphonate can inhibit the curling of graphene oxide and then improve its dispersion. The GO‐ZrP was then applied to phenolic resin–based friction materials by blending and hot pressing to improve their friction properties. The results show that the phenolic resin–based friction materials modified by GO‐ZrP possess excellent tribological, mechanical, and thermal properties. Also, the specific wear rate of the material decreased nearly fivefold with the optimal loading, while the friction coefficient was basically stable. Synergistic effects between GO and ZrP nanosheets provide good prospects for the application of 2D nanofillers in friction materials. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46543.     

Preparation of polyacrylonitrile/graphene oxide by in situ polymerization

Highly oriented molecular structure is essential for high‐performance carbon fibers. The addition of a small amount of graphene sheets may enhance the degree of molecular orientation of precursor fibers during spinning and stabilization by limiting the disorientation of the chain segments. Graphene sheets merge into the carbon fiber structure during carbonization. The structure and properties of polyacrylonitrile containing graphene oxide (GO) prepared by in situ polymerization were investigated. With increasing GO loading, the molecular weight of the polymer decreased gradually from 69 000 g mol^?1 for the sample without GO to 60 600 g mol^?1 for the sample with 2.5 wt% loading of GO. Scanning electron microscopy and X‐ray diffraction results indicated that GO was dispersed in single layers in the polymer matrix. The degree of crystallization of the polymer with 0.5 wt% GO was increased by 8%. Moreover, differential scanning calorimetry and thermogravimetric analysis showed that an appropriate amount of GO, e.g. 0.5 wt%, made the carbon yield of the polymer increase by 5.0 wt%, because the GO in the composite improved the intermolecular crosslinking reaction. Copyright © 2012 Society of Chemical Industry     

In situ development of bio‐based polyurethane‐blend‐epoxy hybrid materials and their nanocomposites with modified graphene oxide via non‐isocyanate route

We developed a series of sunflower oil‐based non‐isocyanate polyurethane (NIPU)‐blend‐epoxy hybrid materials (HNIPUs) and their nanocomposites with amine‐functionalized graphene oxide (AF‐GO). Firstly, carbonated sunflower oil (CSFO) containing five‐membered cyclocarbonate groups was synthesized by the reaction of epoxidized sunflower oil with carbon dioxide (CO₂) at a pressure of 50 bar and temperature of 110 °C. Then, a series of HNIPUs were synthesized using a mixture of CSFO and a commercially available epoxy resin in various amounts (10, 20 and 30 wt% with respect to CSFO) using isophorone diamine as the curing agent. The HNIPU with 30 wt% epoxy showed the best mechanical properties. Finally, nanocomposites of 30 wt% HNIPU‐based composition were prepared with various amounts of AF‐GO (0.3, 0.6 and 1.0 wt%) and were characterized using Fourier transform infrared and ¹H NMR spectroscopies, X‐ray diffraction and scanning electron microscopy. These results emphasize the potentiality of this environmentally friendly approach for preparing renewable HNIPU and nanocomposite materials of high performances. © 2018 Society of Chemical Industry     

Graphene and graphene oxide and their uses in barrier polymers

Currently, there is great interest in graphene‐based devices and applications because graphene has unique electronic and material properties, which can lead to enhanced material performance. Graphene may be used in a wide variety of potential applications from next‐generation transistors to lightweight and high‐strength polymeric composite materials. Graphene, which has atomic thickness and two‐dimensional sizes in the tens of micrometer range or larger, has also been considered a promising nanomaterial in gas‐ or liquid‐barrier applications because perfect graphene sheets do not allow diffusion of small gases or liquids through its plane. Recent molecular simulations and experiments have demonstrated that graphene and its derivatives can be used for barrier applications. In general, graphene and its derivatives can be applied via two major routes for barrier polymer applications. One is the transfer or coating of few‐layered, ultrathin graphene and its derivatives, such as graphene oxide (GO) and reduced graphene oxide (rGO), on polymeric substrates. The other is the incorporation of fully exfoliated GO or rGO nanosheets into the polymeric matrix. In this article, we review the state‐of‐the‐art research on the use of graphene, GO, and rGO for barrier applications, including few‐layered graphene or its derivatives in coated polymeric films and polymer nanocomposites consisting of chemically exfoliated GO and rGO nanosheets, and their gas‐barrier properties. As compared to other nanomaterials being used for barrier applications, the advantages and current limitations are discussed to highlight challenging issues for future research and the potential applications of graphene/polymer, GO/polymer, and rGO/polymer composites. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39628.     

Preparation of polyimide/siloxane‐functionalized graphene oxide composite films with high mechanical properties and thermal stability via in situ polymerization

An effective approach to prepare polyimide/siloxane‐functionalized graphene oxide composite films is reported. The siloxane‐functionalized graphene oxide was obtained by treating graphene oxide (GO) with 1,3‐bis(3‐aminopropyl)‐1,1,3,3‐tetra‐methyldisiloxane (DSX) to obtain DSX‐GO nanosheets, which provided a starting platform for in situ fabrication of the composites by grafting polyimide (PI) chains at the reactive sites of functional DSX‐GO nanosheets. DSX‐GO bonded with the PI matrix through amide linkage to form PI‐DSX‐GO films, in which DSX‐GO exhibited excellent dispersibility and compatibility. It is demonstrated that the obvious reinforcing effect of GO to PI in mechanical properties and thermal stability for PI‐DSX‐GO is obtained. The tensile strength of a composite film containing 1.0 wt% DSX‐GO was 2.8 times greater than that of neat PI films, and Young's modulus was 6.3 times than that of neat PI films. Furthermore, the decomposition temperature of the composite for 5% weight loss was approximately 30 °C higher than that of neat PI films. © 2015 Society of Chemical Industry     

Synthesis of polythiophene/graphene oxide composites by interfacial polymerization and evaluation of their electrical and electrochemical properties

We report a new method for the synthesis of polythiophene (PTh)/graphene oxide (GO) nanocomposites by interfacial polymerization. Polymerization occurred at the interface of two immiscible solvents, i.e. n‐hexane containing thiophene and nitromethane containing GO and an initiator. Characterizations were done using Fourier transform infrared spectroscopy, ultraviolet–visible spectroscopy, X‐ray diffraction, scanning electron microscopy, thermogravimetric analysis, and electrochemical and electrical conductivity measurements. Spectroscopic analyses showed successful incorporation of GO in the PTh matrix. Morphological analysis revealed good dispersion of GO sheets in the polymer matrix. The PTh/GO composites showed marked improvements in thermal stability and electrical conductivity (2.7 × 10^?4 S cm^?1) compared to pure PTh. The composites exhibited excellent electrochemical reversibility compared to pure PTh at a scan rate of 0.1 V s^?1. The composites were stable even up to 100 electrochemical cycles, indicating good cycle performance. The specific capacitance of the composites was calculated using cyclic voltammetry and was found to be 99 F g^?1. © 2014 Society of Chemical Industry     

Multifunctional polyimide/graphene oxide composites via in situ polymerization

In this article, we detail an effective way to improve electrical, thermal, and gas barrier properties using a simple processing method for polymer composites. Graphene oxide (GO) prepared with graphite using a modified Hummers method was used as a nanofiller for r‐GO/PI composites by in situ polymerization. PI composites with different loadings of GO were prepared by the thermal imidization of polyamic acid (PAA)/GO. This method greatly improved the electrical properties of the r‐GO/PI composites compared with pure PI due to the electrical percolation networks of reduced graphene oxide within the films. The conductivity of r‐GO/PI composites (30:70 w/w) equaled 1.1 × 10¹ S m^?1, roughly 10¹⁴ times that of pure PI and the oxygen transmission rate (OTR, 30:70 w/w) was reduced by about 93%. The Young's modulus of the r‐GO/PI composite film containing 30 wt % GO increased to 4.2 GPa, which was an approximate improvement of 282% compared with pure PI film. The corresponding strength and the elongation at break decreased to 70.0 MPa and 2.2%, respectively. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40177.     

A morphological study on the migration and selective localization of graphene in the PLA/PMMA blends

Nano‐filled polymer blends offer the opportunity to obtain materials with fine‐tuned properties. In this work, the dispersion and localization behavior of graphene nanoplate (GNP) and graphene oxide (GO) in solution mixed blends of polylactic acid (PLA) and polymethyl methacrylate (PMMA) were investigated. The blends were prepared by using different mixing sequences to investigate the effect of kinetics parameters and surface chemistry of filler as well as thermodynamics affinity on the localization of fillers. Field Emission Scanning Electron Microscopy (FESEM) and Rheometric Mechanical Spectroscopy (RMS) were employed. In addition, graphene materials were compared by Fourier transform infrared and Raman spectroscopy as well as elemental analysis characterization. Results showed that depending on the mixing sequence, the GNPs were localized in the both phases and interface through migration to reach thermodynamics equilibrium. However, GO localization was significantly affected by the mixing sequence due to better interaction with the polymer phases. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43799.     

Enhanced thermal conductivity and dimensional stability of flexible polyimide nanocomposite film by addition of functionalized graphene oxide

Polyimide (PI) nanocomposites with both enhanced thermal conductivity and dimensional stability were achieved by incorporating glycidyl methacrylate‐grafted graphene oxide (g‐GO) in the PI matrix. The PI/g‐GO nanocomposites exhibited linear enhancement in thermal conductivity when the amount of incorporated g‐GO was less than 10 wt%. With the addition of 10 wt% of g‐GO to PI (PI/g‐GO‐10), the thermal conductivity increased to 0.81 W m^?1 K^?1 compared to 0.13 W m^?1 K^?1 for pure PI. Moreover, the PI/g‐GO‐10 composite exhibited a low coefficient of thermal expansion (CTE) of 29 ppm °C^?1. The values of CTE and thermal conductivity continuously decreased and increased, respectively, as the g‐GO content increased to 20 wt%. Combined with excellent thermal stability and high mechanical strength, the highly thermally conducting PI/g‐GO‐10 nanocomposite is a potential substrate material for modern flexible printed circuits requiring efficient heat transfer capability.     

Synthesis and exfoliation of isocyanate-treated graphene oxide nanoplatelets

A number of functionalized graphite oxides were prepared by treatment of graphite oxide (GO) with organic isocyanates. These isocyanate-treated GOs (iGOs) can then be exfoliated into functionalized graphene oxide nanoplatelets that can form a stable dispersion in polar aprotic solvents. Characterization of iGOs by FT-IR spectroscopy and elemental analysis suggested that the isocyanate treatment results in the functionalization of the carboxyl and hydroxyl groups in GO via formation of amides and carbamate esters, respectively. The degree of GO functionalization can be controlled via either the reactivity of the isocyanate or the reaction time. When used with functionalized isocyanates, the described methodology allows for the elaboration of graphene oxide nanoplatelets with different surface functional groups.     

One‐pot synthesis,characterization, and field emission investigations of composites of polypyrrole with graphene oxide,reduced graphene oxide,and graphene nanoribbons

Pyrrole monomer was polymerized by a chemical oxidative route in the presence of graphene oxide (GO), reduced GO (rGO), and graphene nanoribbons (GNR) separately to prepare composites of polypyrrole (PPy) as PPy–GO, PPy–rGO, and PPy–GNR, respectively. The morphological, chemical, and structural characterization of the as‐synthesized products was carried out using scanning electron microscopy, Raman spectroscopy, and Fourier transform infrared spectroscopy. Field emission studies of the PPy–GO, PPy–rGO, and PPy–GNR emitters were performed at the base pressure of 1 × 10^?8 mbar in a planar “diode” configuration. The turn‐on field values, corresponding to an emission current density of 1 µA/cm², are observed to be 1.5, 2.2, and 0.9 V/µm for the PPy–GO, PPy–rGO, and PPy–GNR emitters, respectively. The maximum emission current density of 2.5 mA/cm² is drawn from PPy–GO at an applied electric field of 3.2 V/µm, 1.2 mA/cm² at 3.6 V/µm from the PPy–rGO, and 8 mA/cm² at 2.2 V/µm from the PPy–GNR emitters. All of the composites exhibit good emission stability over more than 2 h. The results indicate the potential for a facile route for synthesizing composites of conducting polymers and graphene‐based materials, with enhanced functionality. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134 , 45170.     

In situ thermal reduction of graphene oxide in a styrene–ethylene/butylene–styrene triblock copolymer via melt blending

We report an in situ thermal reduction of graphene oxide (GO) in a styrene–ethylene/butylene–styrene (SEBS) triblock copolymer matrix during a melt‐blending process. A relatively high degree of reduction was achieved by melt‐blending premixed GO/SEBS nanocomposites in a Haake mixer for 25 min at 225 °C. Infrared spectral results revealed the successful thermal reduction of, and the strong adsorption of SEBS on, the graphene sheets. The glass transition temperature of polystyrene (PS) segments in SEBS was enhanced by the incorporation of thermally reduced graphene oxide (TRGO). The resultant TRGO/SEBS nanocomposites were used as a masterbatch to improve the mechanical properties of PS. Both the elongation at break and the flexural strength of PS/SEBS blends were enhanced with the addition of the TRGO. Our demonstration of the in situ thermal reduction of GO via melt blending is a simple, efficient strategy for preparing nanocomposites with well‐dispersed TRGO in the polymer matrix, which could be an important route for large‐scale fabrication of high‐performance graphene/polymer nanocomposites. © 2013 Society of Chemical Industry     

In situ polymerization of polyimide‐based nanocomposites via covalent incorporation of functionalized graphene nanosheets for enhancing mechanical,thermal, and electrical properties

In this study, we report an effective method to fabricate high‐performance polyimide (PI)‐based nanocomposites using 3‐aminopropyltriethoxysilane functionalized graphene oxide (APTSi‐GO) as the reinforcing filler. APTSi‐GO nanosheets exhibit good dispersibility and compatibility with the polymer matrix because of the strong interfacial covalent interactions. PI‐based nanocomposites with different loadings of functionalized graphene nanosheets (FGNS) were prepared by in situ polymerization and thermal imidization. The mechanical performance, thermal stability, and electrical conductivity of the FGNS/PI nanocomposites are significantly improved compared with those of pure PI by adding only a small amount of FGNS. For example, a 79% improvement in the tensile strength and a 132% increase in the tensile modulus are achieved by adding 1.5 wt % FGNS. The electrical and thermal conductivities of 1.5 wt % FGNS/PI are 2.6 × 10^?3 S/m and 0.321 W/m·K, respectively, which are ～10¹⁰ and two times higher than those of pure PI. Furthermore, the incorporation of graphene significantly improves the glass‐transition temperature and thermal stability. The success of this approach provides a good rationale for developing multifunctional and high‐performance PI‐based composite materials. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42724.     

Fabrication and characteristics of graphene oxide/nanocellulose fiber/poly(vinyl alcohol) film

Poly(vinyl alcohol) (PVA), PVA/nanocellulose fiber (CNF), and PVA/CNF/graphene oxide (GO) films were prepared simply by casting stable aqueous mixed solutions. FTIR investigation indicated that hydrogen bonding existed between the interface of GO and PVA‐CNF. Scanning electron microscopy and X‐ray diffraction analysis showed that GO was uniformly dispersed in PVA‐CNF matrix. Introducing CNF into PVA caused a significant improvement in tensile strength, and further incorporating GO into PVA/CNF matrix led to a further increase. The tensile strength of the neat PVA film, PVA/CNF composite, and PVA/CNF/GO film (0.6 wt % GO) was 43, 69, and 80 MPa, respectively. Moreover, when incorporating 8 wt % CNF into PVA matrix, O₂ permeability and water absorption decreased from 13.36 to 11.66 cm³/m²/day and from 164.2% to 98.8%, respectively. Further adding 0.6 wt % GO into PVA/CNF matrix resulted in a further decrease of permeability and water absorption to 3.19 cm³/m²/day and 91.2%, respectively. Furthermore, for all composite samples, the transmittance of visible light was higher than 67% at 800 nm. CNF and GO‐reinforced PVA with high mechanical and barrier properties are potential candidates for packaging industry. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 45345.     

Preparation of cellulose–graphene oxide aerogels with N‐methyl morpholine‐N‐oxide as a solvent

Cellulose–graphene oxide (GO) aerogel composites were successfully prepared from cellulose and GO dispersed in N‐methyl morpholine‐N‐oxide monohydrate, a nontoxic and environmentally friendly solvent, after a freeze‐drying process. Because of the strong interactions between the numerous oxygen‐containing groups located on the surface of GO and the functional groups of the cellulose molecules, the GO monolayers were well dispersed in the three‐dimensional porous structure of the cellulose aerogels. With the addition of 10 wt % GO, the swelling ratios and water contents of the composite cellulose–GO aerogels increased from 468 to 706% and from 82.4% to 87.6%, respectively. The corresponding maximum decomposition temperatures also increased from 335 to 353 °C with increasing GO content from 0 to 10%; this indicated that the thermal stability of the cellulose–GO aerogels was enhanced. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46152.     

An efficient and eco‐friendly solution‐chemical route for preparation of ultrastable reduced graphene oxide suspensions

We describe a facile and eco‐friendly solution approach to chemically reduce graphene oxide (GO) to high‐quality graphene using nontoxic inexpensive reductants. The reduction process and mechanism of a group of eco‐friendly reductants were systematically studied. These reductants perform quite differently in terms of reduction rate (l ‐ascorbic acid [l ‐AA] > d ‐fructose > sucrose > glucose > sodium sulfite), density of small sp² domains (l ‐AA > sodium sulfite > glucose > sucrose > d ‐fructose), degree of reduction (l ‐AA > glucose > d ‐fructose > sodium sulfite > sucrose), and stability of the reduced GO suspension (l ‐AA > d ‐fructose > sucrose > glucose > sodium sulfite). l ‐AA shows the highest reducing ability, achieving the largest extent of reduction after 10 min in the presence of ammonia. Both residual oxygen functionalities and the adsorbed oxidization products of l ‐AA on the graphene surface are responsible for stabilizing the reduced GO suspension over several months. © 2014 American Institute of Chemical Engineers AIChE J, 60: 2757–2764, 2014     

Electrochemical evaluation of functionalized graphene oxide filled PVA-chitosan biohybrid for supercapacitor applications

The evolution of eco-friendly and cost efficient energy storage devices is eminent because of depletion of ozone layer and environmental issues. Biopolymer nanocomposites are the most auspicious aspirant to intercept hazardous situations. Chemical functionalization of graphene oxide (GO) is an essential component to avoid agglomeration of nanoparticles and it also helps in end-use applications. Poly(vinyl alcohol) and chitosan biocomposite is prepared by magnetic stirring method followed by dispersion of nanofiller by ultrasonication process. The aim is to emphasize on usage of metal-free material that is bionanocomposite, to exploit and enhance electrical properties of resultant product. The major drawback of chitosan is its low mechanical strength which can be overcome by employing GO and poly(vinyl alcohol). Scanning electron microscopy and transmission electron microscopy studies examined the uniform distribution of GO nanoparticles and functionalization improved the dispersion by creating nitrogen and hydroxyl moieties, this increases the intermolecular interactions between nanofiller and biopolymer matrix. The investigation of thermal analysis revealed the improved thermal stability and lower weight reduction on incorporation of GO and chemically functionalized GO. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48610.