Colliding-pulse modelocked quantum dot lasers

Colliding pulse modelocking is demonstrated for the first time in quantum dot lasers. Using 3.9 mm-long devices with a 245 /spl mu/m-long central absorber, 7 ps pulses at a repetition rate of 20 GHz is obtained. For Gaussian pulses a time-bandwidth product close to the Fourier transform limit is determined. These results confirm the potential of quantum dot lasers for high repetition rate harmonic modelocking.     

MOCVD生长薄膜材料制作半导体可饱和吸收镜

介绍了当前国际上流行的用半导体可饱和吸收镜来对固体激光器、光纤激光器和半导体激光器进行被动锁模的方法,阐述了半导体可饱和吸收镜用来作为被动锁模吸收体的原理,并介绍了如何利用金属有机气相淀积(MOCVD)技术生长各种波长激光器所需要的半导体可饱和吸收镜.     

Fabrication of optically nonlinear semiconductor mirrors for modelocking of neodymium-doped fiber lasers

A recipe is given for an all-semiconductor, optically nonlinear mirror for passive modelocking of neodymium-doped fiber lasers. InGaAs-GaAs quantum wells (QWs) are used for a saturable absorber. It was empirically found that the best modelocked operation occurred when QWs had a heavy-hole excitonic absorption peak at a wavelength about 10-20 nm longer than the lasing wavelength. An AlAs-GaAs quarter-wavelength stack is used for a rear high reflector. Nonlinear mirrors are etched after epitaxial growth so that the lasing wavelength coincides with a reflectance maximum, giving maximum optical modulation. Nonlinear mirrors are implanted with large doses (2/spl times/10/sup 15//cm/sup 2/) of hydrogen ions in order to increase electron-hole recombination rates, speed material recovery, increase saturation intensity, and inhibit spontaneous Q-switching. Studies of material growth by molecular beam epitaxy and metal-organic chemical vapor deposition (MOCVD) are reported. Modelocked fiber lasers exhibited a pseudorandom output that was produced by several optical pulses that circulated simultaneously in the fiber. It was found that a very high reflectance mirror is not required for lasing or modelocking. To our knowledge, this is the first report of the use of a nonlinear mirror grown by MOCVD to modelock a neodymium fiber laser.     

High frequency characteristics of InAs/GaInAs quantum dotdistributed feedback lasers emitting at 1.3 μm

The high frequency properties of InAs/GaInAs quantum dot distributed feedback (DFB) lasers emitting at 1.3 μm have been examined. The lasers display a small static linewidth of 1.3 MHz and a chirp as low as 83 MHz/mA. More than 5 GHz small-signal modulation bandwidth was observed in the first devices indicating the potential for high-speed operation of quantum dot lasers     

Lasing at three-dimensionally quantum-confined sublevel of self-organized In/sub 0.5/Ga/sub 0.5/As quantum dots by current injection

A laser oscillation from self-organized In/sub 0.5/Ga/sub 0.5/As quantum dots is achieved at 80 K by current injection. Lasing at a three-dimensionally quantum confined sublevel of the In/sub 0.5/Ga/sub 0.5/As quantum dots is clearly demonstrated for the first time by electroluminescence and diamagnetic energy shift measurement. The results predict the possibility of ultra-low threshold current operation of quantum dot lasers.     

Broad-area InAs/GaAs quantum dot lasers incorporating intermixed passive waveguide

InAs/GaAs quantum dot lasers incorporating passive waveguide created by post-growth intermixing processing have been studied. Emission wavelength of the passive section shows relative blueshift as high as 135 nm with respect to the emission wavelength of the active section. Intrinsic losses in the section formed by the intermixing are very small. Broad-area lasers with 100 mum stripe width incorporating intermixed section have demonstrated improvements in far-field pattern under both pulsed and continuous wave pumping current     

Linewidth enhancement factor and near-field pattern in tunnel injection In/sub 0.4/Ga/sub 0.6/As self-assembled quantum dot lasers

Measurements of ultra-low linewidth enhancement factor in ridge-waveguide tunnel injection In/sub 0.4/Ga/sub 0.6/As/GaAs self-assembled quantum dot lasers have been made and the results compared with similar quantum well lasers. Values of /spl alpha//spl sim/3.8 were measured in the quantum well lasers, and /spl alpha/ was /spl les/0.7 in the quantum dot lasers. The consequent suppression of filamentation in the quantum dot devices has also been observed.     

800nm布拉格反射镜型半导体可饱和吸收镜

我们在国内首先研制成功波长为800nm附近布拉格反射镜型半导体可饱和吸收镜。用布拉格反射镜型半导体可饱和吸收镜作为自启动装置，我们实现了氩离子激光器泵浦的钛宝石激光器被动连续锁模，获得了连续锁模脉冲序列，重复频率在100MHz到200MHz。     

High-power quantum dot lasers with improved temperature stability of emission wavelength for uncooled pump sources

915 nm quantum dot lasers with temperature stable emission wavelengths have been realised for uncooled high-power applications. Broad area lasers with optimised dot geometry exhibit a thermal induced wavelength shift of 0.09 nm/K, which is 3.5 times lower than for quantum well lasers. Despite this improvement the lasers show high output powers of more than 3 W and wallplug efficiencies of 55% in continuous-wave operation.     

Relaxation oscillations of quantum dot lasers

The relaxation oscillation frequency of quantum dot lasers is modelled theoretically. Its dependency on the driving current, maximum gain, intersublevel relaxation time and homogeneous broadening is investigated. For suitable, feasible quantum dot laser parameters, relaxation oscillation frequencies up to 10 GHz are predicted. Making these devices useful for 5 Gbit/s communication systems     

长波长半导体可饱和吸收镜的研制及其在固体激光器被动锁模和调Q中的应用

介绍了国际上流行的长波长半导体可饱和吸收镜的研制方法及其在固体激光器被动锁模和被动调Q中所起的作用，并分别就Qr^4 ：YAG，Cr：Forsterite等激光器进行了阐述。     

高性能InAs/GaAs量子点外腔激光器

为了获得高性能的量子点外腔激光器(ECL),利用InAs/GaAs量子点Fabry-Perot(FP)腔激光器研制了光栅外腔可调谐ECL。对InAs/GaAs量子点ECL进行了一系列的性能测试,主要包括单模稳定性测试、单模调谐范围测试、阈值电流密度测试、无跳模连续调谐测试和输出功率测试。在室温条件下获得了24.6nm的连续调谐范围,覆盖波长从999.2nm到1 023.8nm,并且实现了波长无跳模连续调谐。在调谐范围内最低阈值电流密度为1 525A/cm2,而且在中心波长处获得的单模输出功率为15mW,单模边模抑制比(SMSR)高达35dB。研究结果表明,通过构建光栅外腔可以实现高性能的InAs/GaAs量子点ECL。     

1.5 /spl mu/m GaInNAs semiconductor saturable absorber for passively modelocked solid-state lasers

Fully self-starting and passively modelocking of a 1.5 /spl mu/m solid-state laser with a GaInNAs semiconductor saturable absorber mirror (SESAM) has been demonstrated for the first time. A saturation fluence of 20 /spl mu/J/cm/sup 2/, a modulation depth of 0.39% and a fast temporal decay of 18 ps were measured. These well-suited nonlinear optical SESAM parameters allowed for self-starting and passive modelocking of a diode-pumped Er:Yb:glass laser at 1.534 /spl mu/m with a pulse duration of 5 ps at 61 MHz.     

Emission dynamics of dot and wire DFB lasers

Emission dynamics of InGaAs-InGaAsP dot and wire DFB lasers were systematically investigated and compared with quantum-well lasers. Accordingly, the effective carrier capture times, which limit the maximum modulation bandwidth of low-dimensional semiconductor lasers, were determined and compared for these lasers. A quite large effective capture time of about 350 ps was found for the dot laser in contrast to about 56 ps for the quantum-well laser. This is attributed to a dramatically reduced volume of active region which induces a large scaled-up quantum capture time in the dot lasers. The systematic comparison of the quantum-well, -wire and -dot lasers reveal the dominant limitation of geometry effect on the high-speed modulation of quantum-wire and -dot lasers except when the packing density of the dots or wires is increased.     

Enhanced radiation hardness of quantum dot lasers to high energyproton irradiation

The influence of high energy proton irradiation on the device properties of InGaAs/GaAs quantum dot and quantum well lasers has been investigated. In the regime of spontaneous emission, quantum dot lasers show a much enhanced radiation hardness compared to quantum well lasers, manifested in a smaller increase of threshold current density. However, in the lasing regime the device characteristics are similarly influenced. Internal differential quantum efficiencies are reduced, internal optical losses remain constant     

Low threshold current density 1.3 /spl mu/m InAs/InGaAs quantum dot lasers with InGaP cladding layers grown by gas-source molecular-beam epitaxy

InAs/InGaAs quantum dot lasers with InGaP cladding layers grown by gas-source molecular-beam epitaxy (MBE) are reported. The laser emits 1.296 /spl mu/m light output and demonstrates a very low threshold current density of 111 A/cm/sup 2/. This is the lowest reported value of GaAs-based 1.3 /spl mu/m quantum dot lasers with InGaP cladding layers.     

Design of tunneling injection quantum dot lasers

In recent years, semiconductor quantum dot (QD) lasers have attracted considerable attention due to their potentia applications[1]. Although QD laser has been predicted can have more excellent performance than conventional quan- tum well laser, so far tem…     

Low-threshold quantum dot lasers with 201 nm tuning range

A grating-coupled external-cavity quantum dot laser is tuned across a 201 nm range at a maximum bias of 2.87 kA/cm². One order of magnitude less than the bias required for comparable tuning of quantum well lasers. The tuning range increases for higher cavity losses of the quantum dot laser     

Low threshold current operation of self-assembled InAs/GaAs quantum dot lasers by metal organic chemical vapour deposition

Low threshold current operation of self-assembled InAs/GaAs quantum dot lasers grown by metal organic chemical vapour deposition is reported. Continuous-wave lasing at room temperature with low threshold current (6.7 mA) was achieved at the wavelength of 1.18 /spl mu/m. The threshold current of 6.7 mA is the lowest value so far achieved in quantum dot lasers grown by metal organic chemical vapour deposition. Comparison with photoluminescence spectra indicates that the observed lasing originates from the ground state of InAs quantum dots.     

High-Performance Quantum Dot Lasers and Integrated Optoelectronics on Si

This paper provides a review of the recent developments of self-organized In(Ga)As/Ga(Al)As quantum dot lasers grown directly on Si, as well as their on-chip integration with Si waveguides and quantum-well electroabsorption modulators. A novel dislocation reduction technique, with the incorporation of self-organized In(Ga,Al)As quantum dots as highly effective three-dimensional dislocation filters, has been developed to overcome issues associated with the material incompatibility between III-V materials and Si. With the use of this technique, quantum dot lasers grown directly on Si exhibit relatively low threshold current (J _th=900 A/cm²) and very high temperature stability (T ₀=278 K). Integrated quantum dot lasers and quantum-well electroabsorption modulators on Si have been achieved, with a coupling coefficient of more than 20% and a modulation depth of ~100% at a reverse bias of 5 V. The monolithic integration of quantum dot lasers with both amorphous and crystalline Si waveguides, fabricated using plasma-enhanced chemical-vapor deposition and membrane transfer, respectively, has also been demonstrated.