Photocatalytic reduction of CO2 with H2O on Ti-MCM-41 and Ti-MCM-48 mesoporous zeolite catalysts

Titanium oxide species included within the framework of mesoporous zeolites (Ti-MCM-41 and Ti-MCM-48) prepared by a hydrothermal synthesis exhibited high and unique photocatalytic reactivity for the reduction of CO₂ with H₂O at 328 K to produce CH₄ and CH₃OH in the gas phase. In situ photoluminescence, diffuse reflectance absorption, ESR and XAFS investigations indicated that the titanium oxide species are highly dispersed within the zeolite framework and exist in tetrahedral coordination. The charge transfer excited state of the highly dispersed titanium oxide species played a significant role in the reduction of CO₂ with H₂O exhibiting a high selectivity for the formation of CH₃OH.     

Total oxidation of propene and propane over gold–copper oxide on alumina catalysts: Comparison with Pt/Al2O3

Oxidation of propene and propane to CO₂ and H₂O has been studied over Au/Al₂O₃ and two different Au/CuO/Al₂O₃ (4 wt.% Au and 7.4 wt.% Au) catalysts and compared with the catalytic behaviour of Au/Co₃O₄/Al₂O₃ (4.1 wt.% Au) and Pt/Al₂O₃ (4.8 wt.% Pt) catalysts. The various characterization techniques employed (XRD, HRTEM, TPR and DR-UV–vis) revealed the presence of metallic gold, along with a highly dispersed CuO (6 wt.% CuO), or more crystalline CuO phase (12 wt.% CuO).

A higher CuO loading does not significantly influence the catalytic performance of the catalyst in propene oxidation, the gold loading appears to be more important. Moreover, it was found that 7.4Au/CuO/Al₂O₃ is almost as active as Pt/Al₂O₃, whereas Au/Co₃O₄/Al₂O₃ performs less than any of the CuO-containing gold-based catalysts.

The light-off temperature for C₃H₈ oxidation is significantly higher than for C₃H₆. For this reaction the particle size effect appears to prevail over the effect of gold loading. The most active catalysts are 4Au/CuO/Al₂O₃ (gold particles less than 3 nm) and 4Au/Co₃O₄/Al₂O₃ (gold particles less than 5 nm).     

Synthesis and H2 uptake of Cu2(OH)3Cl, Cu(OH)2 and CuO nanocrystal aggregate

Monodispersed Cu₂(OH)₃Cl nanoplatelets, Cu(OH)₂ nanowires, CuO nanoparticles and nanoribbons with a spherical morphology were synthesized using hydrothermal and heat-treatment reactions, and their H₂ storage characteristics were examined. The Cu₂(OH)₃Cl nanoplatelets particles formed immediately after mixing the reactant, which subsequently formed larger uniform spherical particles in the submicron range. This procedure highlights a practical strategy for producing spherical Cu(OH)₂ and CuO materials consisting of monodispersed nanocrystals. The spherical aggregates of Cu₂(OH)₃Cl nanoplatelets heat-treated at 473 K could reversibly store up to 2.35 wt.% H₂ at 38 bar and 293 K.     

Characterization of self-standing Ti-containing porous silica thin films and their reactivity for the photocatalytic reduction of CO2 with H2O

Self-standing porous silica thin films with different pore structures were synthesized by a solvent evaporation method and used as photocatalysts for the photocatalytic reduction of CO₂ with H₂O at 323 K. UV irradiation of these Ti-containing porous silica thin films in the presence of CO₂ and H₂O led to the formation of CH₄ and CH₃OH as well as CO and O₂ as minor products. Such thin films having hexagonal pore structure exhibited higher photocatalytic reactivity than the Ti-MCM-41 powder catalyst even with the same pore structure. From FTIR investigations, it was found that these Ti-containing porous silica thin films had different concentrations of surface OH groups and showed different adsorption properties for the H₂O molecules toward the catalyst surface. Furthermore, the concentration of the surface OH groups was found to play a role in the selectivity for the formation of CH₃OH.     

Kinetics of CO and H2 oxidation over CuO-CeO2 catalyst in H2 mixtures with CO2 and H2O

The kinetics of CO and H₂ oxidation over a CuO-CeO₂ catalyst were simultaneously investigated under reaction conditions of preferential CO oxidation (PROX) in hydrogen-rich mixtures with CO₂ and H₂O. An integral packed-bed tubular reactor was used to produce kinetic data for power-law kinetics for both CO and H₂ oxidations. The experimental results showed that the CO oxidation rate was essentially independent of H₂ and O₂ concentrations, while the H₂ oxidation rate was practically independent of CO and O₂ concentrations. In the CO oxidation, the reaction orders were 0.91, −0.37 and −0.62 with respect to the partial pressure of CO, CO₂ and H₂O, respectively. In the H₂ oxidation, the orders were 1.0, −0.48 and −0.69 with respect to the partial pressure of H₂, CO₂ and H₂O, respectively. The activation energies of the CO oxidation and the H₂ oxidation were 94.4 and 142 kJ/mol, respectively. The rate expressions of both oxidations were able to predict the performance of the PROX reactor with accuracy. The independence between the CO and the H₂ oxidation suggested different sites for CO and H₂ adsorption on the CuO-CeO₂ catalyst. Based on the results, we proposed a new reaction model for the preferential CO oxidation. The model assumes that CO adsorbs selectively on the Cu⁺ sites; H₂ dissociates and adsorbs on the Cu⁰ sites; the adsorbed species migrates to the interface between the copper components and the ceria support, and reacts there with the oxygen supplied by the ceria support; and the oxygen deficiency on the support is replenished by the oxygen in the reaction mixture.     

The role of lanthana loading on the catalytic properties of Pd/Al2O3-La2O3 in the NO reduction with H2

The role of La₂O₃ loading in Pd/Al₂O₃-La₂O₃ prepared by sol–gel on the catalytic properties in the NO reduction with H₂ was studied. The catalysts were characterized by N₂ physisorption, temperature-programmed reduction, differential thermal analysis, temperature-programmed oxidation and temperature-programmed desorption of NO.

The physicochemical properties of Pd catalysts as well as the catalytic activity and selectivity are modified by La₂O₃ inclusion. The selectivity depends on the NO/H₂ molar ratio (GHSV = 72,000 h⁻¹) and the extent of interaction between Pd and La₂O₃. At NO/H₂ = 0.5, the catalysts show high N₂ selectivity (60–75%) at temperatures lower than 250 °C. For NO/H₂ = 1, the N₂ selectivity is almost 100% mainly for high temperatures, and even in the presence of 10% H₂O vapor. The high N₂ selectivity indicates a high capability of the catalysts to dissociate NO upon adsorption. This property is attributed to the creation of new adsorption sites through the formation of a surface PdO_x phase interacting with La₂O₃. The formation of this phase is favored by the spreading of PdO promoted by La₂O₃. DTA shows that the phase transformation takes place at temperatures of 280–350 °C, while TPO indicates that this phase transformation is related to the oxidation process of PdO: in the case of Pd/Al₂O₃ the O₂ uptake is consistent with the oxidation of PdO to PdO₂, and when La₂O₃ is present the O₂ uptake exceeds that amount (1.5 times). La₂O₃ in Pd catalysts promotes also the oxidation of Pd and dissociative adsorption of NO mainly at low temperatures (<250 °C) favoring the formation of N₂.     

Low-temperature H2 and N2 transport through thin Pd66Cu34Hx layers

The single gas H₂ and N₂ permeability of a 4 μm thick dense fcc-Pd₆₆Cu₃₄ layer has been studied between room temperature and 510 °C and at pressure differences up to 400 kPa. Above 50 °C the H₂ flux exhibits an Arrhenius-type temperature dependence with J_H2=(5.2±0.3) mol m⁻² s⁻¹ exp[(−21.3 ± 0.2) kJ mol⁻¹/(R·T)]. The hydrogen transport rate is controlled by the bulk diffusion although the pressure dependence of the H₂ flux deviates slightly from Sieverts’ law. A sudden increase of the H₂ flux below 50 °C is attributed to embrittlement.     

Effect of Na-addition on catalytic activity of Pt-ZSM-5 for low-temperature NO–H2–O2 reactions

The effect of additives on Pt-ZSM-5 catalysts was studied for the selective NO reduction by H₂ in the presence of excess O₂ (NO–H₂–O₂ reaction) at 100 °C. The reaction of NO in a stream of 0.08% NO, 0.28% H₂, 10% O₂, and He balance yielded N₂ with less than 10% selectivity, which could not be increased by changing Pt loading or H₂ concentration in the gas feed. Co-impregnation of NaHCO₃ and Pt onto ZSM-5 decreased the BET surface area and the Pt dispersion. Nevertheless, the Na-loaded catalyst (Na-Pt-ZSM-5) exhibited the higher NO_x conversion (>90%) and the N₂ selectivity (ca. 50%). Such a high catalytic activity even at high Na loadings (≥10 wt.%) is completely contrast to other Na-added Pt catalyst systems reported so far. Further improvement of N₂ selectivity was attained by the post-impregnation of NaHCO₃ onto Pt-ZSM-5. In situ DRIFT measurements suggested that the addition of Na promotes the adsorption of NO as NO₂⁻-type species, which would play a role of an intermediate to yield N₂. The introduction of Lewis base to the acidic supports including ZSM-5 would be applied to the catalyst design for selective NO–H₂–O₂ reaction at low temperatures.     

Low-temperature H2-SCR of NO on a novel Pt/MgO-CeO2 catalyst

The selective catalytic reduction of NO by H₂ under strongly oxidizing conditions (H₂-SCR) in the low-temperature range of 100–200 °C has been studied over Pt supported on a series of metal oxides (e.g., La₂O₃, MgO, Y₂O₃, CaO, CeO₂, TiO₂, SiO₂ and MgO-CeO₂). The Pt/MgO and Pt/CeO₂ solids showed the best catalytic behavior with respect to N₂ yield and the widest temperature window of operation compared with the other single metal oxide-supported Pt solids. An optimum 50 wt% MgO-50wt% CeO₂ support composition and 0.3 wt% Pt loading (in the 0.1–2.0 wt% range) were found in terms of specific reaction rate of N₂ production (mols N₂/g_cat s). High NO conversions (70–95%) and N₂ selectivities (80–85%) were also obtained in the 100–200 °C range at a GHSV of 80,000 h⁻¹ with the lowest 0.1 wt% Pt loading and using a feed stream of 0.25 vol% NO, 1 vol% H₂, 5 vol% O₂ and He as balance gas. Addition of 5 vol% H₂O in the latter feed stream had a positive influence on the catalytic performance and practically no effect on the stability of the 0.1 wt% Pt/MgO-CeO₂ during 24 h on reaction stream. Moreover, the latter catalytic system exhibited a high stability in the presence of 25–40 ppm SO₂ in the feed stream following a given support pretreatment. N₂ selectivity values in the 80–85% range were obtained over the 0.1 wt% Pt/MgO-CeO₂ catalyst in the 100–200 °C range in the presence of water and SO₂ in the feed stream. The above-mentioned results led to the obtainment of patents for the commercial exploitation of Pt/MgO-CeO₂ catalyst towards a new NO_x control technology in the low-temperature range of 100–200 °C using H₂ as reducing agent. Temperature-programmed desorption (TPD) of NO, and transient titration of the adsorbed surface intermediate NO_x species with H₂ experiments, following reaction, have revealed important information towards the understanding of basic mechanistic issues of the present catalytic system (e.g., surface coverage, number and location of active NO_x intermediate species, NO_x spillover).     

Decomposition of nitric oxide over perovskite oxide catalysts: effect of CO2, H2O and CH4

Direct nitric oxide decomposition over perovskites is fairly slow and complex, its mechanism changing dramatically with temperature. Previous kinetic study for three representative compositions (La_0.87Sr_0.13Mn_0.2Ni_0.8O_3−δ, La_0.66Sr_0.34Ni_0.3Co_0.7O_3−δ and La_0.8Sr_0.2Cu_0.15Fe_0.85O_3−δ) has shown that depending on the temperature range, the inhibition effect of oxygen either increases or decreases with temperature. This paper deals with the effect of CO₂, H₂O and CH₄ on the nitric oxide decomposition over the same perovskites studied at a steady-state in a plug-flow reactor with 1 g catalyst and total flowrates of 50 or 100 ml/min of 2 or 5% NO. The effect of carbon dioxide (0.5–10%) was evaluated between 873 and 923 K, whereas that of H₂O vapor (1.6 or 2.5%) from 723 to 923 K. Both CO₂ and H₂O inhibit the NO decomposition, but inhibition by CO₂ is considerably stronger. For all three catalysts, these effects increase with temperature. Kinetic parameters for the inhibiting effects of CO₂ and H₂O over the three perovskites were determined. Addition of methane to the feed (NO/CH₄=4) increases conversion of NO to N₂ about two to four times, depending on the initial NO concentration and on temperature. This, however, is still much too low for practical applications. Furthermore, the rates of methane oxidation by nitric oxide over perovskites are substantially slower than those of methane oxidation by oxygen. Thus, perovskites do not seem to be suitable for catalytic selective NO reduction with methane.     

Catalytic reduction of NOx with H2/CO/CH4 over PdMOR catalysts

Conversion of NO_x with reducing agents H₂, CO and CH₄, with and without O₂, H₂O, and CO₂ were studied with catalysts based on MOR zeolite loaded with palladium and cerium. The catalysts reached high NO_x to N₂ conversion with H₂ and CO (>90% conversion and N₂ selectivity) range under lean conditions. The formation of N₂O is absent in the presence of both H₂ and CO together with oxygen in the feed, which will be the case in lean engine exhaust. PdMOR shows synergic co-operation between H₂ and CO at 450–500 K. The positive effect of cerium is significant in the case of H₂ and CH₄ reducing agent but is less obvious with H₂/CO mixture and under lean conditions. Cerium lowers the reducibility of Pd species in the zeolite micropores. The catalysts showed excellent stability at temperatures up to 673 K in a feed with 2500 ppm CH₄, 500 ppm NO, 5% O₂, 10% H₂O (0–1% H₂), N₂ balance but deactivation is noticed at higher temperatures. Combining results of the present study with those of previous studies it shows that the PdMOR-based catalysts are good catalysts for NO_x reduction with H₂, CO, hydrocarbons, alcohols and aldehydes under lean conditions at temperatures up to 673 K.     

Kinetics of propylene epoxidation using H2 and O2 over a gold/mesoporous titanosilicate catalyst

The oxidation of propylene to propylene oxide (PO) with hydrogen–oxygen mixtures was studied on gold supported on the mesoporous titanium silicate, Ti-TUD. The catalyst gave stable activity at low conversions of propylene (<6%) and high selectivity to PO (>95%). Kinetic data were fit to a power-rate law and gave the following expression: r_PO = k(H₂)^0.54(O₂)^0.24(C₃H₆)^0.36. The fractional orders in hydrogen, oxygen, and propylene indicated that these reactants interacted with the catalyst to form species that led to the final PO product. The catalyst likely operated by the commonly accepted mechanism of hydrogen peroxide production on gold sites, and epoxidation on titanium centers. Carbon dioxide was formed primarily from further oxidation of PO rather than the oxidation of propylene, while water was produced from the reaction of hydrogen and oxygen.     

High-rate properties of LiFePO4/carbon composites as cathode materials for lithium-ion batteries

Electrochemical properties of LiFePO₄/carbon composites were investigated to achieve a high-rate lithium electrode performance. LiFePO₄/carbon composites were synthesized by a hydrothermal reaction of a solution of FeSO₄·7H₂O, H₃PO₄, and LiOH·H₂O mixed with carbon powders under nitrogen atmosphere followed by annealing under 1% H₂–99% Ar atmosphere. Particle size of the obtained LiFePO₄/carbon composites observed by scanning electron microscopy was less than 100 nm. At a high current density of 1000 mA g⁻¹, the LiFePO₄/carbon composites showed a high discharge capacity of 113 mA h g⁻¹, and a flat discharge potential plateau was observed around 3.4 V. The discharge capacity at the high current density, 85% of that at a low current density of 30 mA g⁻¹, is a quite high value for LiFePO₄ cathodes. Homogeneous microstructure consisting of small particles contributed to the high-rate properties of the LiFePO₄/carbon composites.     

Synthesis of cyclic carbonates from epoxides: Use of reticular oxygen of Al2O3 or Al2O3-supported CeOx for the selective epoxidation of propene

Reticular oxygen of Al₂O₃ or CeO_x supported on Al₂O₃ was used for the epoxidation of propene without any double bond cleavage. In batch reaction, Al₂O₃ alone was able to convert propene into propene oxide (PO) with 100% selectivity and 2% conversion of propene with a close to 3:1 ratio with respect to the number of Al(III) reduced to elemental Al. When Ce₂O₃/Al₂O₃ or CeO₂/Al₂O₃ was used, Al remained in its +3 oxidation state, while the Ce oxide was the oxidant as demonstrated by XPS analyses. CeO_x/Al₂O₃ was more active (propene conversion yield of 4–5%) but the selectivity was lower (70%) as PO was isomerized into acetone and propionaldehyde.

Interestingly the use of reticular oxygen very much improves the selectivity with respect to the use of pure O₂. In fact, while propene was more efficiently oxidized (10%) with O₂ in presence of Al₂O₃ or CeO_x/Al₂O₃, the selectivity was as low as 40% because C1 and C2 products were formed. However, the use of reticular oxygen represents a selective two-step technique for the use of molecular oxygen as oxidant of propene. The used oxides can be re-oxidized and the whole process can be further improved towards higher yields.

PO is quantitatively converted into propene carbonate by reaction with CO₂ in presence of Nb₂O₅.     

Combined effect of H2O and SO2 on V2O5/AC catalysts for NO reduction with ammonia at lower temperatures

Combined effect of H₂O and SO₂ on V₂O₅/AC the activity of catalyst for selective catalytic reduction (SCR) of NO with NH₃ at lower temperatures was studied. In the absence of SO₂, H₂O inhibits the catalytic activity, which may be attributed to competitive adsorption of H₂O and reactants (NO and/or NH₃). Although SO₂ promotes the SCR activity of the V₂O₅/AC catalyst in the absence of H₂O, it speeds the deactivation of the catalyst in the presence of H₂O. The dual effect of SO₂ is attributed to the SO₄²⁻ formed on the catalyst surface, which stays as ammonium-sulfate salts on the catalyst surface. In the absence of H₂O, a small amount of ammonium-sulfate salts deposits on the surface of the catalyst, which promote the SCR activity; in the presence of H₂O, however, the deposition rate of ammonium-sulfate salts is much greater, which results in blocking of the catalyst pores and deactivates the catalyst. Decreasing V₂O₅ loading decreases the deactivation rate of the catalyst. The catalyst can be used stably at a space velocity of 9000 h⁻¹ and temperature of 250 °C.     

MnOx/Pt/Al2O3 catalysts for CO oxidation in H2-rich streams

The catalytic activity of Pt on alumina catalysts, with and without MnO_x incorporated to the catalyst formulation, for CO oxidation in H₂-free as well as in H₂-rich stream (PROX) has been studied in the temperature range of 25–250 °C. The effect of catalyst preparation (by successive impregnation or by co-impregnation of Mn and Pt) and Mn content in the catalyst performance has been studied. A low Mn content (2 wt.%) has been found not to improve the catalyst activity compared to the base catalyst. However, catalysts prepared by successive impregnation with 8 and 15 wt.% Mn have shown a lower operation temperature for maximum CO conversion than the base catalyst with an enhanced catalyst activity at low temperatures with respect to Pt/Al₂O₃. A maximum CO conversion of 89.8%, with selectivity of 44.9% and CO yield of 40.3% could be reached over a catalyst with 15 wt.% Mn operating at 139 °C and λ = 2. The effect of the presence of 5 vol.% CO₂ and 5 vol.% H₂O in the feedstream on catalysts performance has also been studied and discussed. The presence of CO₂ in the feedstream enhances the catalytic performance of all the studied catalysts at high temperature, whereas the presence of steam inhibits catalysts with higher MnO_x content.     

Experimental and microkinetic modeling of steady-state NO reduction by H2 on Pt/BaO/Al2O3 monolith catalysts

Experimental results describing the product distribution during the reduction of NO by H₂ on Pt/Al₂O₃ and Pt/BaO/Al₂O₃ catalysts are presented in the temperature range 30–500 °C and H₂/NO feed ratio range of 0.9–2.5. A microkinetic model that describes the kinetics of NO reduction by H₂ on Pt/Al₂O₃ is proposed and most of the kinetic parameters are estimated from either literature data or from thermodynamic constraints. The microkinetic model is combined with the short monolith flow model to simulate the conversions and selectivities corresponding to the experimental conditions. The predicted trends are in excellent qualitative and reasonable quantitative agreement with the experimental results. Both the model and the experiments show that N₂O formation is favored at low temperatures and low H₂/NO feed ratios, N₂ selectivity increases monotonically with temperature for H₂/NO feed ratios of 1.2 or less but goes through a maximum at intermediate temperatures (around 100 °C) for H₂/NO feed ratios 1.5 or higher. Ammonia formation is favored for H₂/NO feed ratios of 1.5 or higher and intermediate temperatures (100–350 °C) buts starts to decompose at a temperature of 400 °C or higher. The microkinetic model is used to determine the surface coverages and explain the trends in the experimentally observed selectivities.     

Production of hydrogen via partial oxidation of methanol over Au/TiO2 catalysts

Selective production of hydrogen by partial oxidation of methanol (CH₃OH + (1/2)O₂ → 2H₂ + CO₂) over Au/TiO₂ catalysts, prepared by a deposition–precipitation method, was studied. The catalysts were characterized by XRD, TEM, and XPS analyses. TEM observations show that the Au/TiO₂ catalysts exhibit hemispherical gold particles, which are strongly attached to the metal oxide support at their flat planes. The size of the gold particles decreases from 3.5 to 1.9 nm during preparation of the catalysts with the rise in pH from 6 to 9 and increases from 2.9 to 4.3 nm with the rise in calcination temperature up to 673 K. XPS analyses demonstrate that in uncalcined catalysts gold existed in three different states: i.e., metallic gold (Au⁰), non-metallic gold (Au^δ+) and Au₂O₃, and in catalysts calcined at 573 K only in metallic state. The catalytic activity is strongly dependent on the gold particle size. The catalyst precipitated at pH 8 and uncalcined catalysts show the highest activity for hydrogen generation. The partial pressure of oxygen plays an important role in determining the product distribution. There is no carbon monoxide detected when the O₂/CH₃OH molar ratio in the feed is 0.3. Both hydrogen selectivity and methanol conversion increase with increasing the reaction temperature. The reaction pathway is suggested to consist of consecutive methanol combustion, partial oxidation and steam reforming.     

Characterization and performance of Pt-USY in the SCR of NOx with hydrocarbons under lean-burn conditions

Pt-USY was used for the selective catalytic reduction of NO_x with hydrocarbons in the presence of excess oxygen. The catalyst was prepared by an ion-exchange method and characterized by XRD, TEM, CO chemisorption, and Ar adsorption at 87 K. The platinum particle size distribution was found to be broad (2–20 nm), with no apparent sintering of the active phase during the HC-SCR process after 25 h time-on-stream. Generally, large metal clusters (>15 nm) are situated at the external surface of the zeolite, while the smaller ones are located in the pores of the support. Pt-USY shows an excellent activity in the deNO_x reaction (molar NO_x conversion 90% at 475 K) with propene as the reductant in 5 kPa O₂, as well as stable operation during time-on-stream. Propane only yields a low NO_x conversion compared to propene. The presence of high oxygen contents (5–10 kPa O₂) slightly inhibits the reaction. No significant decrease in deNO_x activity was observed at high space velocities (up to 100,000 h⁻¹). The presence of SO₂ and H₂O in the feed stream did not significantly affect the deNO_x activity. Pt-USY performs better under lean-burn conditions than other Pt-catalysts supported on e.g. ZSM-5, Al₂O₃, or SiO₂. The selectivity to N₂ was similar to the other Pt-based catalysts (30%), the other major product being N₂O.     

SAPO-34 membranes for CO2/CH4 separations: Effect of Si/Al ratio

Silicoaluminophosphate (SAPO) membranes with Si/Al gel ratios from 0.05 to 0.3 were synthesized by in situ crystallization onto porous, tubular stainless steel support. Pure SAPO-34 membranes were obtained when the Si/Al ratio was 0.15 or higher. The adsorbate polarizability correlated with the adsorption capacity on SAPO-34, and the amounts of gases adsorbed were in the order: CO₂ > CH₄ > N₂ > H₂. The Si/Al ratio did not affect the pore volume significantly, but it changed the CO₂ and CH₄ adsorption equilibrium constants. The SAPO-34 membranes effectively separated CO₂ from CH₄ for feed pressures up to 7 MPa. At 295 K, for a pressure drop of 138 kPa and a 50/50 feed, the CO₂/CH₄ selectivity was 170 for a membrane with a Si/Al gel ratio of 0.15. At 7 MPa, the CO₂/CH₄ selectivity was 100 and the CO₂ permeance was 4 × 10⁻⁸ mol/(m² · s · Pa) at 295 K. This membrane was also separated CO₂/N₂ (selectivity = 21) and H₂/CH₄ (selectivity = 32) mixtures at 295 K and a pressure drop of 138 kPa. Competitive adsorption and difference in diffusivities are responsible for CO₂/CH₄ and CO₂/N₂ separations, whereas the H₂/CH₄ separation was due to diffusivity differences. For a membrane with Si/Al gel ratio of 0.1, a mixture of SAPO-34 and SAPO-5 formed, and the CO₂/CH₄ selectivity was lower.