Effect of Sulfate Ions on YAG Powders Synthesized by Microwave Homogeneous Precipitation

Using Al(NO3)3·9H2O, NH4Al(SO4)2·12H2O, Y(NO3)3 as mother salts, and urea as precipitant, YAG nano-powders were synthesized by microwave homogeneous precipitation. The composition, morphology, and phase transformation of precursor were analyzed by IR, XRD and TEM. The size distribution of YAG powders was characterized using laser diffraction method. The results show that sulfate ions influence the dispersion, composition and morphology of the YAG precursors. The addition of moderate sulfate ions can produce YAG powders with nano size and excellent dispersion at 1100 ℃.     

Preparation of Neodymium-Doped Yttrium Aluminum Garnet Transparent Ceramics by Homogeneous Precipitation Method

Neodymium-doped yttriumaluminumgarnet(Nd∶YAG)transparent polycrystalline ceramics,laser ce-ramic matrix materials,are gradually becomingsubsti-tutes for single crystals because they are provided withpredominantly chemical stability,highly doped ionconcentration,excellent optical performance and hightemperature stability[1,2].Presently,the conventionallyused methods to produce Nd∶YAG powders are solid-state processes[3],chemical precipitation methods[4,5]andlowtemperature combustiontechniqu…     

Synthesis of Polycrystalline Nd∶YAG Nanopowders Used for Sintering Transparent Ceramics via Gel Combustion

Polycrystalline nano-sized neodymium doped yttrium aluminum garnet (Nd∶Y3Al5O12, Nd∶YAG) powders were synthesized via a gel combustion method using nitrates and citric acid as starting materials. The evolution of phase composition and micro-structure of the powders were characterized by X-ray powder diffraction, thermogravimetry/differential thermal analysis and scanning electron microscopy. Well-crystallized Nd∶YAG nano-sized powders could be obtained at 950 ℃ for 2 h. The resultant powders are well dispersed, have a relatively narrow size distribution with an average particle size of approximately 50 nm, and show excellent sinterability. These powders can be densified to 99.2% of the theoretical density by HP sintering at 1700 ℃ for 3 h under 20 MPa nitrogen pressure.     

Crystallization and Microstructure Evolution of Amorphous Al85 Y4 Nd4 Fe7 Alloy

A rapidly solidified Al85Y4Nd4Fe7(%, in nominal atomic fraction) alloy was prepared by melt spinning. Asquenched and as-annealed microstructures were studied by differential scanning calorimetry (DSC), X-ray diffraction(XRD), transmission electron microscopy (TEM) and high-resolution transmission electron microscopy (HRTEM). Fully amorphous structure could be obtained in the rapidly solidified Al85Y4Nd4Fe7 alloy ribbons. The temperature of first crystallization exceeds 300℃. Crystallization of as-annealed Al85Y4Nd4Fe7 alloy is shown to occur in two stages : ( 1 ) primary crystallization of α-Al; (2) formation of Al3Y, Al13Fe4 and unknown crystalline phases.     

Synthesis and Characterization of Er3+∶Y3Al5O12 Nanocrystalline Powders Prepared by Sol-Gel Method

Nano-sized Er3 ∶Y3Al5O12 powders was successfully prepared via a simple sol-gel route at as low a temperature at 800 ℃ whereas a temperature much higher is necessary to obtain this compound by solid state synthesis (about 1500 ℃). The phase purity, composition and microstructural features of the materials were analyzed by means of X-ray diffraction(XRD), infrared spectroscopy(IR) and transmission electron microscopy(TEM), and no other intermediate phase were observed to form in the range of 700～1000 ℃. The luminescence spectra of Er3 substituted for Y3 in YAG in 1% content was characterized on samples at different temperature.     

Microstructure and mechanical properties of Mg-7Zn-3Al alloy with Nd and Y additions

The effects of combined addition of 0.6 wt.% Nd and 0.4 wt.% Y on the microstructure and mechanical properties of Mg-7Zn-3Al alloy were investigated.The results indicated that the Nd and Y addition led to obvious dendrite coarsening.However,it could modify the morphology and distribution of-Mg 32(Al,Zn) 49 intermetallics.Moreover,Al 2 REZn 2 phase could be introduced into the alloy with the Nd and Y addition.With the effective second-phase strengthening,the ultimate tensile strength and elongation in as-cast state can be improved by the Nd and Y addition.After ageing treatment,the alloy with the Nd and Y addition exhibited better precipitation strengthening effects by forming finer MgZn 2 and Mg 32(Al,Zn) 49 precipitates into the-Mg matrix.As a result,the yield and ultimate strength of Mg-7Zn3Al-0.6Nd-0.4Y alloy could be increased to 182 and 300 MPa by peak-ageing treatment.     

Citrate sol-gel combustion preparation and photoluminescence properties of YAG:Ce phosphors

Yellow-emitting YAG:Ce3+ nanocrystalline phosphors were prepared by citrate sol-gel combustion method using citric acid as the fuel and chelating agent. The influence of mole ratio of citric acid to metallic ions (MRCM), pH value of the solution, calcination temperature and Ce-doped concentration on the structures and properties of as-prepared powders were investigated in detail. Higher crystallinity and better luminescence performance powders were obtained at MRCM=2, pH=3 and the calcination temperature of 1200 °C. The phosphors exhibited the characteristic broadband visible luminescence of YAG:Ce. The optimum concentration of Ce3+ was 1.0 mol.%, and the concentration quenching was derived from the reciprocity between electric dipole and electric quadrupole (d-q). Especially, the pH value of the solution was a key factor to obtain a stable sol-gel system and then obtain pure and homogeneous rare earth ions doped YAG phosphors at a lower tem-perature. The Y3Al5O12:Ce0.03 phosphor with optimized synthesis-condition and composition had a similar luminescence intensity with the commercial phosphor YAG:Ce.     

有机次膦酸在硝酸体系下提取稀土研究

本文采用溶剂萃取法,用有机次磷酸萃取剂从富含稀土元素镧(La）、钕(Nd）、钇(Y)、铈(Ce）的硝酸溶液中提取稀土。选择盐酸为反萃剂。考察了酸度、萃取剂浓度、相比和萃取时间对萃取率和反萃率的影响,结果表明,二异丁基膦酸萃取稀土的最佳条件为：室温,酸度0.2mol/l,萃取剂浓度40%,A/O比1:5,萃取时间15min,镧（La）、钕（Nd）,铈（Ce）和钇（Y）分别为41.68%、81.30%、81.29%和100%。当利用盐酸作为反萃实验的反萃剂时其最佳条件为：室温,初始水相稀土溶液为0.3 mol/L,反萃剂盐酸为6 mol/L,负载有机相与反萃剂盐酸溶液的体积比为1:6,将反萃的震荡时间改变为5min,应用上述条件的镧(La）、钕(Nd）、铈(Ce）、钇(Y)的反萃率分别为92.45%、94.88%、95.76%、93.34%。有机次膦酸对稀土元素（La）、钕（Nd）、铈（Ce）和钇（Y）的萃取效率不同。钇的提取率高于镧、钕和铈。它是一种有机次膦酸,对轻稀土元素亲和力低,对重稀土元素亲和力强。     

Solvent extraction of neodymium（III） from acidic nitrate medium using Cyanex 921 in kerosene

The extraction of neodymium(Ⅲ) from acidic nitrate medium was investigated using Cyanex 921 as extractant in kerosene. The metal concentration in the aqueous phase before and after extraction was determined spectrophotometrically by Arsenazo Ⅲ method. The complete equilibration was achieved in 15 min. The effects of shaking time, nitric acid concentration, nitrate concentration, extractant concentration, and temperature on the extraction were studied. The extraction of Nd(Ⅲ) was found to increase very slowly with increase in concentration of HNO3 in the range of 0.001-0.008 mol/L and then decreased when 0.01 mol/L HNO3 was used. The percentage of extraction was increased with increase in nitrate concentration from 0.01-0.45 mol/L and then decreased when nitrate concentration increased to 0.5 mol/L. Quantitative extraction of Nd(Ⅲ) (98%) was obtained from the aqueous phase containing 0.001 mol/L HNO3 and 0.1 mol/L KNO3 using 0.5 mol/L Cyanex 921. On the basis of slope analysis, the extracted complex in the organic phase was proposed to be Nd(NO3)3.2Cyanex 921. The extraction of Nd(III) was found to increase with increase in concentration of metal ion in the range of 0.001-0.05 mol/L from 0.001 mol/L HNO3 and 0.1 mol/L KNO3 with 0.1 mol/L Cyanex 921. The percentage of extraction of neodymium was found to decrease with increase in temperature. From temperature variation studies, the negative value of △H indicated the extraction reaction to be exothermic and the negative value of △S indicated the formation of a stable complex. Almost 100% Nd(Ⅲ) was recovered from the fully loaded organic phase using 0.002 mol/L H2SO4 and 0.01 mol/L HCl.     

Study on co-precipitation synthesized Y3Al5O12:Ce yellow phosphor for white LED

A precursor of the Y3Al5O12:Ce (YAG:Ce) phosphor was obtained by co-precipitation of the solution of high purity nitrates with ammonium bicarbonate solution. The precipitation process of the precursor was studied in this work. YAG:Ce yellow phosphors with fine morphology was synthesized by annealing the precursor at a reducing atmosphere. The crystal phase, microstructure of the phosphors and their photoluminescence were investigated. The results indicated that the pure phase of YAG:Ce could be obtained at ...     

Coating of SiC Powder with Nano YAG Phase

SiCceramiccompositeshavefoundextensiveap plicationsinmodernindustryduetotheirexcellentchemicalstabilityandwear resistance .Rodeghieroetal.[1～ 3 ] investigatedthefabricationofSiC Al2 O3 ce ramiccompositematerialsviaco precipitationcoatingandsol gelmethods…     

Application of Stereology on Neodymium-Doped Yttrium Aluminum Garnet (Nd: YAG) Transparent Ceramics

Nd: YAG precursor powders were synthesized by homogeneous precipitation, and Nd: YAG transparent ceramics were prepared by vacuum sintering at 1700 ℃ for 5 h. The ceramic materials were characterized by light transmittance and field emission gun-environment scanning microscope. Using statistics and stereology theory, study was carried out on the quantitative relationships between light transmittance and stereological parameters in three-dimensional Euclidean space. It is found that the transmittance of Nd:YAG with 1 mm in thickness is about 45% and 58% in visible and near-infrared wavelength, respectively. The transmittance linearly increases with increasing equivalent sphere diameter and reaches the theoretical value of single crystal when the equivalent sphere diameter is 20μm. The transmittance decreases with the increasing of mean specific area per unit volume of grain and discrete grains, and the transmittance decreases with increasing mean free distance of grains in Nd:YAG ceramics.     

Preparation and characterization of Y3Al5O12:Ln（Ln=Eu,Ce） phosphor powders by ultrasonic atomization and co-precipitation process

A novel technique for YAG:Ln(Ln=Eu,Ce) phosphor powder synthesis with a nanocrystalline structure was developed.Nanocrystalline YAG:Ln powder was prepared by an ultrasonic atomization and co-precipitation method using a mixture solution of ammonium hydroxide(NH3·H2O) and ammonium hydrogen carbonate(NH4HCO3) as precipitant.The as-prepared nano-powders were characterized by X-ray diffraction(XRD),scanning electron microscopy(SEM),and fluorescence spectrometer.The obtained phosphor powders were homogenous and in size of 50-70 nm.The results demonstrated that by using ultrasonic atomization and co-precipitation process,we could synthesize a good quality YAG:Ln(Ln=Eu,Ce) phosphor powder that had many potential applications.     

Nanostructured yttrium aluminum garnet powders synthesized by co-precipitation method using tetraethylenepentamine

Tetraethylenepentamine(C8H23N5,TEPA) has been used as a novel precipitant to synthesize yttrium aluminum garnet(Y3Al5O12,YAG) precursor from a mixed solution of aluminum and yttrium nitrates via a normal-strike co-precipitation method without controlling the pH value during precipitation process.The original precursor was analyzed by thermogravimetry/differential scanning calorimetry(TG/DSC).The evolution of phase composition and micro-structure of the as-synthesized YAG powders were characterized by X-ray ...     

Study on a novel flat renewal supported liquid membrane with D2EHPA and hydrogen nitrate for neodymium extraction

The Nd(III) extraction in flat renewal supported liquid membrane(FRSLM),with polyvinylidene fluoride membrane and renewal solution including HNO3 solution as the stripping solution and di(2-ethylhexyl) phosphoric acid(D2EHPA) dissolved in kerosene as the membrane solution,was investigated.The effects of pH in the feed phase,volume ratio of membrane solution to stripping solution,concentra-tion of HNO3 solution and concentration of carrier in the renewal phase on extraction of Nd(III) were also studied,respectively.As a result,the optimum extraction conditions of Nd(III) were obtained when concentration of HNO3 solution was 4.00 mol/L,concentration of D2EHPA was 0.100 mol/L,and volume ratio of membrane solution to stripping solution was 1.00 in the renewal phase,and pH was 4.60 in the feed phase.When initial concentration of Nd(III) was 2.00×10-4 mol/L,the extraction percentage of Nd(III) was up to 92.9% in 75 min.     

Effect of UVB 311 nm irradiation on normal human skin

OBJECTIVE: To determine the relative efficacy and morbidity of Ho:YAG versus Nd:YAG laser treatment of bullous lung disease in an animal model. SUMMARY BACKGROUND DATA: Laser coagulation procedures for treatment of emphysematous pulmonary bullae and heterogeneous emphysema continue to evolve. The role of lasers in lung volume reduction surgery remains controversial due to issues of relative efficacy and morbidity. The Nd:YAG laser is most commonly used for these procedures. We hypothesized that the shallower penetration of the Ho:YAG laser may be better suited for laser bullae coagulation and emphysema lung volume reduction with increased efficacy and reduced lung injury. METHODS: Thirty New Zealand White rabbits (15 normal rabbits; 15 with bullous lung disease) were evaluated with Ho:YAG compared to Nd:YAG laser exposures. Bullae were coagulated by either Ho:YAG or Nd:YAG treatment. In all animals (bullous-induced and normals), unaffected lung tissue in the upper lobes and contralateral lungs were treated with 5 spot exposures of Nd:YAG and Ho:YAG, each to assess depth of lung injury. Animals were sacrificed at Days 0, 7, and 21 and their lungs were examined histologically. RESULTS: Ho:YAG and Nd:YAG exposures caused equivalent lung injury to normal lung tissue. In the acute phase, parenchymal necrosis depth was similar for both Ho:YAG and Nd:YAG (850 +/- 273 microns vs. 900 +/- 270 microns respectively, p = 0.7). By Day 7, lung necrosis depth was 925 +/- 133 microns Ho:YAG vs. 1225 +/- 235 microns Nd:YAG (p = 0.33), and lung fibrosis depth was 300 +/- 134 microns Ho:YAG vs. 558 +/- 127 microns Nd:YAG (p = 0.11). By Day 21, pulmonary parenchymal necrosis was not seen. Pleural fibrosis depth was maximal at Day 21, reaching 250 +/- 102 microns for Ho:YAG vs. 300 +/- 156 microns Nd:YAG (P = 0.88). Pleural necrosis depth was 67 +/- 42 microns Ho:YAG vs 48 +/- 34 microns Nd:YAG (p = 0.42) on Day 7 and resolved by Day 21. During surgical coagulation procedures, the Ho:YAG laser was dramatically more efficient in coagulating bullae. The Ho:YAG laser required less exposure at equivalent power and resulted in immediate desiccation of bullae, in sharp contrast to the Nd:YAG laser. CONCLUSIONS: Because the Ho:YAG was more effective and did not result in more acute lung injury than the standard Nd:YAG laser in this study, Ho:YAG lasers may have improved potential for laser treatment of bullae or lung volume reduction surgery (LVRS) compared to Nd:YAG lasers.     

Wound healing and soft tissue effects of CO2, contact Nd: YAG and combined CO2-Nd: YAG laser beams on rabbit trachea

Rabbit trachea was used as an experimental model to study tissue effects and healing of full-thickness tracheal lesions produced by CO2, contact Nd: YAG and combined, coaxial CO2-Nd: YAG (Combo) laser beams. Two power settings (10 W and 16 W) were used with CO2 and contact Nd: YAG lasers. Three different CO2/Nd:YAG power ratios (1:1, 1:2 and 1:4) and power settings (12 W 15 W and 16 W) were used with the Combolaser. Histological specimens for light and transmission electron microscopy were prepared immediately and 1, 3, 5, 7, 14 and 21 days postoperatively. The wound with the most precise and fastest healing was produced by contact Nd: YAG laser. CO2 laser produced a moderate amount of charring and the largest amount of coagulated tissue with a slightly prolonged healing period. In the acute phase, tissue defects produced by the Combolaser with power ratios 1:1 and 1:2 resembled the CO2 laser lesions but with slightly less charring. The power ratio 1:4 diminished the cutting properties of the beam considerably. During the healing period the Combolaser produced the most intensive inflammation and granulation tissue formation resulting in delayed regeneration of the lesion. In transmission electron micrographs the most severe damage to chondrocytes was seen after using the Combolaser. These findings indicate that the Combolaser produces deeper tissue damage than CO2 or contact Nd:YAG laser. However, the Combolaser appears to be suitable for tracheobronchial operations, owing to its good simultaneous cutting and haemostatic properties.     

Sequence analysis suggests the presence of an IG-like domain in the N-terminal region of alpha-dystroglycan which was crystallized after mutation of a protease susceptible site (Arg168-->His)

PURPOSE: Retinal detachment after Nd: YAG laser vitreolysis is rarely reported. The pathogenic role of Nd: YAG laser is analyzed from 3 cases of severe retinal detachment. METHODS: Three men aged (40 to 59 years old) had one or more risk factors for retinal detachment: myopia, complicated cataract surgery, personal or family history of retinal detachment. Nd: YAG laser treatment onto vitreous strand was performed because of: retinal traction, repeated vitreous hemorrhage, anterior vitreous strand in a aphakic patient with cystoid macular edema. Within six weeks following Nd: YAG laser vitreolysis, severe retinal detachment with several tears occurred, complicated with proliferative vitreoretinopathy in two patients, and with choroidal hemorrhage in one. In two cases, several surgical procedures with silicon oil were required and visual acuity remained under 20/1000. In the last case retinal reattachment was obtained with scleral buckling and cryopexy, the patient recovered a visual acuity of 20/100 with a macular pucker. DISCUSSION: Retinal detachment occurred shortly after laser YAG vitreolysis. We assumed Nd: YAG laser was possibly responsible and investigated the possible mechanisms: direct retinal tear, vitreous strand traction, side effect of intraocular shock wave. CONCLUSION: Nd: YAG laser vitreolysis seems to be able to cause retinal detachment. Its use is therefore not recommended, particularly in patients at risk, especially since the efficacy of this treatment has not been proved.     

Synthesis of Y2O3 Nano-Powder from Yttrium Oxalate under Ambient Temperature

ThereareseveralprecipitationmethodsinthesynthesisofY2 O3 nano powdersuchascarbonatemethod ,ammoniumsaltmethodandoxyhydratemeth odetc .[1～ 5] ,buttheoxalateprecipitationmethodisconsideredtobethebestmethodinindustryandtheadvantagesofoxalicacidastheagentofp…