首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 171 毫秒
1.
承德市合金铸铁厂自从引进沈阳铸造研究所的“强制式混凝土搅拌机铲片用高钨白口铸铁、高铬白口铸铁”科研成果以来,按原国家建委要求定点批量生产了铲片,满足了全国140多家用户要求。随着铲片使用寿命的提高,许多用户感到原用30CrMnSi 及45钢衬板寿命过短,与铲片寿命不相匹配,要求研制出使用寿命长的抗磨衬板。我们结  相似文献   

2.
以我国富有且廉价的硼为主要合金原料制造高硼铸造合金衬板。研究了高硼铸造合金衬板的凝固和热处理组织以及热处理后的力学性能和耐磨性。研究结果表明,高硼铸造合金由高硬度硼化物和强韧性好的板条马氏体组成,具有优良的耐磨性,用于制作稳定土搅拌机衬板,使用安全、可靠,使用寿命与高铬白口铸铁和镍硬白口铸铁相当,可以大量节约镍、铬和钼等合金元素,成本降低30%~40%,具有良好的推广经济效益。  相似文献   

3.
强制式混凝土搅拌机效率高、产品质量好、节约原材料,是一种先进的搅拌设备。但过去使用的搅拌叶片很易磨损,不得不频繁地更换,直接影响工作效率,增加维修材料和费用,并恶化了工作环境。国外普遍采用高铬、硬镍等合金白口铸铁来解决磨损问题,而认为钨白口铸铁  相似文献   

4.
鞍山市红砖厂在锤式粉碎机上利用鞍山市机电研究所试制的铬锰钨铸铁粉碎机锤头,经过一年多使用证明效果显著,解决了粉碎机锤头的耐磨难题。粉碎机上的锤头是粉碎加工过程中最容易磨损的部件。目前还没有固定的材质,多数采用普通白口铸铁和高锰钢(Mn13)等材质。其耐磨性能远远满足不了生产上的需要,已成为生产上的一大难题。铬锰钨铸铁是以锰钨代替较贵的耐磨材质钼,造价低于钼合金,而耐磨性能比钼合金毫不逊色。铬锰钨铸铁化学成分含量(%);C2.4~  相似文献   

5.
一、一般铸铁的特性和焊接中的困难铸铁是含碳量大于2%的铁碳合金。铸铁的熔点较低(1200~1250℃左右),线胀系数比钢小,塑性差。铸铁在高温下,随着铁水的冷却一般可能发生两种不同的变化。一种是碳从铁水中分离出来,变成石墨,这个过程叫“石墨化”也就是形成灰口铸铁;而另一种是碳和铁生成碳化物即“碳化铁”又叫“渗碳体”(Fe_3C)形成白口铸铁,非常脆硬,  相似文献   

6.
常用破碎2机备件主要用高锰钢和白口铸铁制造,前景 硬度低,韧性好,在高冲击载荷作用下能产生加工硬化,后硬度高,耐磨性好,声望生低,但直接制造破碎机锤头和衬板易出现断裂,以Si,Mn,Cr为主要合金元素,加入少量Mo,V,Ti,B、Y进行微合金化和变质处理,在空冷淬火条件下,获得了综合性能优良的贝氏体组织,用于制造破碎机锤头和衬板,使用寿命比高锰钢提高3倍以上,可明显提高破碎设备运转率,降低物料破碎成本。  相似文献   

7.
会议消息     
多元低合金抗磨铸铁衬板鉴定会于1983年4月下旬在承德市召开。多元低合金抗磨铸铁衬板是由沈阳铸造研究所与承德市合金铸铁厂合作研制成功的。该合金的研制是为解决强制式混凝土搅拌机原用30C_rM_nsi钢衬板的使用寿命比较短、与铲片寿命不相匹配这一问题而进行的,  相似文献   

8.
高铬铸铁即高铬合金白口铸铁,在国外被称为“第三代”耐磨材料。因其具有优良的抗磨性,而被广泛地应用于磨损设备、备件,特别是用在抗磨料磨损方面,效果更显著。耐磨材料白口铸铁,自1930年进入合金化时期,到六十年代,高铬级(Cr>12%)白口铸铁的研究,日益充实和发展,目前在工业发达的欧美及日本、苏联等国家,被广泛地应用于  相似文献   

9.
高铬白口铸铁作为一种高性能的抗磨材料,已在世界上几个主要工业国家得到了比较广泛的应用。国家建材局将高铬铸铁球这种第三代新型耐磨材料,列入水泥工业“七五”期间推广项目之一。航空航天工业部五三机械厂和数以百计的水泥企业,对这种新型耐磨材料进行了研制和应用。五三机械厂是原航空工业部的铸造专业厂。该厂发挥自己的技术优势,从1986年开始研制并生产航空牌高铬磨球。这种磨球是以高铬白口铸铁为主要原料,通过特殊的铸造工艺和合理的热处理手段,改善了晶粒大小和碳化物的形态分布,形成了高铬磨球硬度与冲击韧性的合理匹配,使磨球的抗磨性显著提高,破球率大大降低。经湖南的华中、新生、湘乡水泥厂,湖北的华新水泥厂、浙江的长兴水泥  相似文献   

10.
强制式混凝土搅拌机叶片、衬板定点会,在国家建委建筑机械局主持下于1981年4月7日至10日在承德召开,参加会议的共29个单位42名代表。与会代表听取了国家建委建筑机械研究所和一机部沈阳铸造研究所关于叶片、衬板攻关过程的介绍,参观了承德市合金铸铁厂根据攻关科研成果试生产的四种规格叶片和一种钒钛中锰球铁衬板的生产情况,还听取了北京第一构件厂和常州市混凝土构件厂对承德市合金铸铁厂所生产叶片的性能指标、经济效果和使用情况的介绍。  相似文献   

11.
采用显微硬度法结合声发射技术,对在45钢表面上用真空熔烧法制得的镍基合金——碳化钨复合涂层的脆性进行测估.结果表明:这种涂层的声发射能量累积计数值En与所加压入负荷P之间存在线性关系;可用En-P直线斜率K来评价涂层的脆性;不同碳化钨含量的涂层的En-P直线的斜率K不同;K值愈大,涂层的脆性愈大.  相似文献   

12.
Centrifuge testing of four glass pipe models has been used to measure the kinematics associated with cast iron pipe fracture and the relative rotation of the pipeline on either side of the fracture when fracture is induced by a normal ground fault. The model pipelines were fabricated at 1/30th scale using solid glass rod of semi-circular cross-section. After placing each model against the transparent sidewall of a test box, the pipe was buried and the tested at 30 g. Movements of the soil and the model pipe were monitored using particle image velocimetry, and analysis was used to examine both the curvature distributions before fracture, the fracture pattern (i.e. the fracture locations) expected for cast iron pipes passing across a normal ground fault, and the post-test rotations across the fractures. The depth of soil cover was observed not to make a significant difference to the amount of initial fracture angle for the range of covers investigated in this study (1.125–2.25 m in prototype scale). The fracture angle was shown to be well represented by the slope of the pipe displacements at the inflection point. The use of normalized peak curvature to estimate the fracture angle (rotation across the fracture) was demonstrated. The estimated magnitude of rotation after the pipe breaks can then be used to estimate the local stresses and strains that would develop in a polymer liner inserted within the cast iron pipeline before fracture initiates and which is therefore subjected to longitudinal bending stresses after the cast iron pipe fractures, values of ‘demand‘ that can then be evaluated against measurements of liner strength (i.e. its stress and/or strain limits). The initial angle of rotation directly across the fractures after they form is approximately the same regardless of when the pipe initially breaks, and regardless of the soil cover depth and soil density. However, the magnitude of the vertical ground displacement across the normal fault needed to induce fracture varies considerably for the different burial conditions that were considered, and the rotation angle increases steadily after fracture if the amount of vertical ground displacement continues to grow.  相似文献   

13.
分析了青铜合金、耐磨铸铁、锌铝合金、MC尼龙、CFRP材料各自的性能特点,对上述各种材料应用于混凝土泵S型阀轴承时的优缺点进行了比较,从而为优选S形阀轴承材料提供了依据。  相似文献   

14.
蔡祖光 《砖瓦》2007,(3):17-19
分析了对辊机辊圈磨损的原因,提出了辊圈磨损的测定方法,并详细论述了减轻辊圈磨损的途径。只有实现对辊机的均匀喂料,采用冷硬铸铁耐磨辊圈或合金耐磨铁铁辊圈或组合式耐磨衬板辊圈,并及时适当地调整刮泥板与辊圈表面之间的贴紧力,才能最大限度地减轻辊圈的磨损,从而提高砖瓦生产企业的经济效益。  相似文献   

15.
根据我国供水行业技术进步的要求和灰口铸铁管铺设的特点,提出了灰口铸铁管运行状态评价方法。该方法确定了评价指示指标、指标的权重及分级标准,并基于贝叶斯理论将经验判断和决策推断结合起来评价灰口铸铁管的运行状态。采用灰口铸铁管的实际运行数据验证该方法,结果表明,该方法可以有效直观地判定管道的运行状态,为管理部门采用合理的顺序和方案来维护、更新管道提供了依据,为保证供水安全提供了理论支持。  相似文献   

16.
Water quality can deteriorate in the transmission and distribution system beyond the treatment plant. Minimizing the potential for biological regrowth can be attained by chlorinating the finished water. While flowing through pipes, the chlorine concentration decreases for different reasons. Reaction with the pipe material itself and the reaction with both the biofilm and tubercles formed on the pipe wall are known as pipe wall demand, which may vary with pipe parameters. The aim of this paper was to assess the impact of the service age of pipes on the effective chlorine wall decay constant. Three hundred and two pipe sections of different sizes and eight different pipe materials were collected and tested for their chlorine first-order wall decay constants. The results showed that pipe service age was an important factor that must not be ignored in some pipes such as cast iron, steel, cement-lined ductile iron (CLDI), and cement-lined cast iron (CLCI) pipes especially when the bulk decay is not significant relative to the wall decay. For the range of the 55 years of pipe service age used in this study, effective wall decay constants ranged from a decrease by -92% to an increase by +431% from the corresponding values in the recently installed pipes. The effect of service age on the effective wall decay constants was most evident in cast iron pipes, whereas steel pipes were less affected. Effective chlorine wall decay for CLCI and CLDI pipes was less affected by service age as compared to steel and cast iron pipes. Chlorine wall decay constants for PVC, uPVC, and polyethylene pipes were affected negatively by pipe service age and such effect was relatively small.  相似文献   

17.
孙向萍 《山西建筑》2009,35(18):179-180
介绍了卡箍式离心排水铸铁管的产品性能,分析了卡箍式排水铸铁管的组成及工艺原理,详细地介绍了卡箍式离心铸铁排水管安装工艺,强调了安装过程中应注意的问题,从而推广卡箍式离心铸铁排水管的应用。  相似文献   

18.
微电解/SBR工艺处理皮革生产废水的试验研究   总被引:2,自引:1,他引:1  
采用微电解/SBR工艺处理晋江某皮革厂生产废水.结果表明,酸性条件下微电解法对皮革废水中COD的去除效果优于碱性条件下的,且铸铁/活性炭填料对COD的去除效果优于铸铁、纯铁、纯铁/活性炭的.当Fe~(2+)的浓度为3 mg/L时已能满足SBR池中微生物对铁的需求,过多投加铁无助于微生物对COD的去除.微电解/SBR工艺可对皮革废水进行有效处理,除氨氮外的各项出水指标均达到<污水综合排放标准>(GB 8978——1996)的二级标准,且微电解填料为工业废料,可达到以废治废的目的.  相似文献   

19.
城市燃气灰铸铁管网改造技术   总被引:1,自引:1,他引:0  
分析了人工煤气转换成天然气后灰铸铁管接口泄漏的原因,比较了铸铁管改造更新中6种常用的非开挖技术,提出了铸铁管改造对策。  相似文献   

20.
冷轧带肋钢筋的质量与轧辊的性能密切相关,作者依据多年从事轧辊研究的经验对高性能硬质合金轧辊的生产工艺和轧辊的使用特性做了介绍。并对轧钢过程中轧辊的异常损坏和防范进行了讨论,可供工程技术人员了解冷轧带肋钢筋性能时参考。  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号