Decoration of graphene oxide nanosheets with amino silane‐functionalized silica nanoparticles for enhancing thermal and mechanical properties of polypropylene nanocomposites

Graphene oxide nanosheets were decorated by amino‐silane modified silica nanoparticles. An electrostatic interaction between the negative charge of oxygen‐containing groups of graphene oxide and the positive charge of amino‐silane functional groups on the surface of silica nanoparticles plays a major role for the interfacial interaction of these two materials. The hybrid material was then used as a reinforcement in polypropylene (PP) composite. The increasing tensile strength at yield, tensile, and flexural modulus of the PP composite at a graphene oxide‐ amino‐silane silica loading content of 20 wt % are about 24.81, 55.52, and 30.35%, respectively, when compared with those of PP. It is believed that GO assists the dispersion of SiO₂ nanoparticles to the polymer matrix because of its unique structure having hydrophilicity due to its oxygen functional groups and hydrophobicity owing to its backbone graphitic carbon structure. This hybrid material may also be used as the reinforcement in other polyolefins. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44382.     

Synthesis and physicochemical investigation of imide-functionalized silica nanocomposites

The incorporation of inorganic nanoparticles into polymers have gained significant attention to improving functional properties. The ultimate nanocomposite behaviors are influenced by many parameters, such as microstructural distribution that are produced during the treatment process. Herein, a hybrid material integrating a modified network into a polyimide PI matrix was produced via the sol–gel method by the reaction of pyromellitic dianhydride, 4, 4-oxydianaline, and 1, 5-diaminonaphthalene to synthesize copolyimides nanocomposite. The modified polyimide and unmodified polyimide silica (SiO₂) nanoparticles were incorporated in the polyimide matrix to have polyimide silica nanocomposite. In modified silica nanoparticles, 3-aminopropyltriethosilane was introduced to have better compatibility among inorganic–organic hybrid with similar chemical contact due to their flexible alkyl group. The surface morphology or structure of silica and polyimide was affirmed by scanning electron microscopy, Fourier transforms infrared spectroscopy confirmed the synthesis of pure polyimide, unmodified polyimide, and modified polyimide silica via presence and absence of certain peaks. Thermogravimetric analysis (TGA) results showed high thermal stability of nanocomposites as silica content increases. In contrast to unmodified silica, the modified silica provides more thermal stability to the nanocomposites. Dynamic mechanical analysis was used to investigate the tensile stress of pure polyimide, unmodified, and modified silica nanocomposites. Thermal stability, storage modulus, and moisture absorption of these hybrid materials were improved with silica nanoparticles. The TG mass spectrum confirms the successful synthesis of modified silica networks. The substituted silica nanoparticles show higher mechanical toughness and storage in modified compared to unmodified silica nanocomposite, which exhibits stronger binding attraction between silica nanoparticles and polyimide matrix.     

Preparation of crosslinked composite nanoparticles

Crosslinked composite nanoparticles were prepared by adding a trifunctional monomer (trimethyol propane trimethacrylate) or a difunctional monomer (divinyl benzene) as a crosslinker into the emulsion polymerization system of styrene in the presence of inorganic nanosilica. A coupling agent, 3‐methacryloxypropyltrimethoxysilane (MPS), was added along with the monomer, crosslinker, and silica to improve the interfacial interaction between silica and polymer and thus to obtain high binding efficiency. The role of MPS was examined. The effects of crosslinkers on the kinetics of emulsion polymerization, monomer conversion, and yield were investigated. The morphology of the composite particles was observed by TEM. The particle size and size distribution of composite latex particles were measured by the dynamic light scattering method. The binding efficiency and swelling ratio were determined by reluxing the sample in xylene using a Soxhlet extraction apparatus. FTIR spectra and TGA verified the participation of crosslinker and silica. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 97: 1538–1544, 2005     

A new extra situ sol–gel route to silica/epoxy (DGEBA) nanocomposite. A DTA study of imidazole cure kinetic

Silica nanoparticles were obtained through the Stöber method, from mixtures of tetraethoxysilane (TEOS) and 3-aminopropyltriethoxysilane (APTS). The nanoparticles were dispersed in tetrahydrofuran (THF) and coupled to bisphenol A epoxy resin (DGEBA) through surface amino groups. After removing THF non-isothermal cure was performed at different heating rates (2–20°C/min), using imidazole (2–4 wt%) as curing agent. For the sake of comparison bare DGEBA epoxy polymers were also prepared with similar schedule A nanocomposite of well-dispersed silica nanoparticles (5 wt%) in a fully cured epoxy matrix was easily obtained. Lower cure kinetics were observed with silica addition. This was attributed to reduction of the imidazole volume concentration. Cure activation energy was not influenced by silica presence, whereas it changed with the imidazole content. Therefore, experimental results suggested that silica had only an indirect effect (the reduction of the imidazole molar concentration) on the epoxy matrix cure kinetics. Glass transformation temperatures, T _g, as high as 175°C were recorded. The nanocomposite glass transformation temperature depended on the heating rate of the cure process, the imidazole and silica content. T _g changes as high as 40°C were detected as a function of the heating rate. At higher imidazole content no differences in T _g values between bare polymer and the nanocomposite were observed. This suggests that a higher imidazole content assures a better interconnection between the compatibilizing epoxy shell around the nanoparticles and the epoxy matrix. The new proposed methodology is an easy route to engineer both nanocomposites structure and interfacial interactions, thus tailoring their properties.     

Electrochemical preparation and characterization of conducting copolymer/silica composite

A composite based on organic copolymer and inorganic oxide, polyaniline/poly o‐toluidine/silica (PANI/POT/SiO₂), has been synthesized successfully by a simple electrochemical method. The composite film was found to be deposited on a Pt substrate by sweeping the potential between ?0.2 and +1.0 V versus a saturated calomel electrode with a scan rate of 100 mV/s. The polymeric composite film thus obtained was characterized by scanning electron microscopy, infrared spectroscopy, conductance measurement, and cyclic voltammetry techniques. Incorporation of silica in the copolymer results a clear difference in surface morphology compared with the bulk homo‐ and copolymers. Further evidence of silica in the composite was achieved by infrared spectral analysis. Indeed, a chemical analysis of the composite matrix showed a content of as high as 25% SiO₂ in the composite thus prepared. Based on the results of cyclic voltammetric analysis, the composite electrode as prepared was found to show good electrochemical stability even at high positive potentials. It also exhibited excellent electroactivity even after incorporation of silica in the matrix. The electroactive composite film was thus examined as electrode modifier to study the redox behavior of ferrous/ferric (Fe²⁺/Fe³⁺) and hydroquinone/benzoquinone (H₂Q/Q) couples. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

The effect of the interface structure of different surface‐modified nano‐SiO2 on the mechanical properties of nylon 66 composites

The nylon 66‐based nanocomposites containing two different surface‐modified and unmodified SiO₂ nanoparticles were prepared by melt compounding. The interface structure formed in different composite system and their influences on material mechanical properties were investigated. The results indicated that the interfacial interactions differed between composite systems. The strong interfacial adhesion helped to increase tensile strength and elastic modulus of composites; whereas, the presence of modification layer in silica surface could enhance the toughness of composites, but the improvement of final material toughness was also correlated with the density of the adhered nylon 66 chains around silica nanoparticles. In addition, the results also indicated that the addition of surface‐modified silica nanoparticles has a distinct influence on the nonisothermal crystallization behavior of the nylon 66 matrix when compared with the unmodified silica nanoparticle. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Use of a nickel-boride–silica nanocomposite catalyst prepared by in-situ reduction for hydrogen production from hydrolysis of sodium borohydride

Hydrogen was produced by hydrolysis of sodium borohydride (NaBH₄) using nickel-boride–silica nanocomposite catalyst. The catalyst was characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), and energy dispersive X-ray spectrometry (EDX). The Ni-B–silica nanocomposite catalyst was found to consist of amorphous Ni-B nanoparticles attached to the surface of amine-modified silica nanosphere. The kinetics of hydrolysis of NaBH₄ by Ni-B–silica composite catalyst was investigated. The effects of temperature, NaBH₄ concentration, and catalyst concentration on hydrogen generation were also investigated. A rate of hydrogen generation as high as 1916 ml H₂/min/g Ni was achieved by catalytic hydrolysis of NaBH₄. The stability of the composite catalyst was also explored.     

Preparation and Characterization of Silica/Polyamide-imide Nanocomposite Thin Films

The functional silica/polyamide-imide composite films were prepared via simple ultrasonic blending, after the silica nanoparticles were modified by cationic surfactant—cetyltrimethyl ammonium bromide (CTAB). The composite films were characterized by scanning electron microscope (SEM), thermo gravimetric analysis (TGA) and thermomechanical analysis (TMA). CTAB-modified silica nanoparticles were well dispersed in the polyamide-imide matrix, and the amount of silica nanoparticles to PAI was investigated to be from 2 to 10 wt%. Especially, the coefficients of thermal expansion (CET) continuously decreased with the amount of silica particles increasing. The high thermal stability and low coefficient of thermal expansion showed that the nanocomposite films can be widely used in the enamel wire industry.     

Silica nanoparticles modified with vinyltriethoxysilane and their copolymerization with N,N′‐bismaleimide‐4,4′‐diphenylmethane

The synthesis and characterization of the vinyltriethoxysilane‐modified silica nanoparticles were investigated. It was shown that the vinyltriethoxysilane molecules had been successfully grafted onto the silica nanoparticles. The native and silane‐modified silica dispersions in N‐methyl‐2‐pyrrolidone with the total solids contents within the range 1–6 wt % exhibited dramatically different flow behaviors. The polymerization of N,N′‐bismaleimide‐4,4′‐diphenylmethane (BMI) initiated by barbituric acid in the presence of the native or vinyltriethoxysilane‐modified silica nanoparticles were then carried out in γ‐butyrolactone (total solids content = 20%). The higher the level of silica, the better the thermal stability of the BMI/silane/silica composite particles. The silane‐modified silica particles significantly improved their dispersion capability within the continuous BMI oligomer matrix. Furthermore, the degree of dispersion of the vinyltriethoxysilane‐modified silica particles in the BMI oligomer matrix decreased with the weight percentage of silica based on total solids increased from 20 to 40 wt %. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: Sci 103: 3600–3608, 2007     

Amorphous silica nanoparticles derived from biowaste via microwave combustion for drug delivery

Amorphous silica nanoparticles are a promising platform for constructing drug delivery vehicles owing to their high biocompatibility and favorable surface chemistry. In the current study, we report the preparation of amorphous silica nanoparticles using rice husk biowaste via easy and rapid microwave-assisted combustion. The obtained results from various characterizations indicate that the prepared sample is an amorphous form of silica nanoparticles having sizes 50–80 nm with high purity. Ciprofloxacin was used as the model drug and it was released from silica nanocarrier in a controlled and prolonged manner. The ciprofloxacin release kinetics was investigated using the Higuchi model and Ritger-Peppas model which corroborate that different process like desorption, diffusion, and surface erosion may be involved in the release of ciprofloxacin from the prepared silica nanocarrier. The antibacterial susceptibility test revealed that the ciprofloxacin loaded silica nanocarrier exhibit a bacterial inhibition zone about 32 ± 4 and 44 ± 3 mm against Escherichia coli and Staphylococcus aureus, respectively. This study can be useful to develop a versatile nanocarrier with controlled delivery of ciprofloxacin to treat different types of bacterial infections.     

Chemical and Textural Characterization of Iron Oxide Nanoparticles and Their Effect on the Thermal Decomposition of Ammonium Perchlorate

Metal oxide nanoparticles have been used as burning rate catalysts for ammonium perchlorate (AP) decomposition in composite solid propellants. Though most papers point to the efficiency of different sizes, shapes and compositions, the texture of the agglomerated particles plays an important role in the catalytic efficiency, but this aspect is not always discussed. In this paper, iron oxide and composite iron oxide/silica powders were synthesized in microemulsion systems and their effect on the decomposition of AP was investigated. X‐ray diffraction (XRD) analysis and Fourier transformed infrared spectroscopy (FT‐IR) showed that the synthesized powders have an amorphous to nanocrystalline pattern, with Fe₂O₃ composition. The use of different FT‐IR spectroscopic techniques – transmission, diffuse reflectance (DRIFT) and universal attenuated total reflectance (UATR) – allied to electron microscopy analysis allowed the characterization of the samples’ surface, indicating that silicon oxide forms a thick matrix that covers the iron oxide nanoparticles. Adsorption of N₂, light scattering and electron microscopy pointed that all samples are formed by mesoporous agglomerated nanoparticles containing micropores indicating that silicon oxide forms a thick matrix that covers the iron oxide nanoparticles. Adsorption of N₂, pointed that all samples show different microstructures and light scattering indicated results refer to agglomerated particles. Finally, the catalytic effect of the samples on the decomposition of AP was evaluated by thermogravimetric analysis coupled to differential thermal analysis (TG/DTA), showing that only the high temperature decomposition step of AP was affected by the catalyst, shifting to lower temperatures the higher the surface area of the synthesized iron oxide sample, regardless of the presence of the silica matrix.     

Composite membranes from polyacrylonitrile with poly(N,N-dimethylaminoethyl methacrylate)-grafted silica nanoparticles as additives

Polyacrylonitrile (PAN)-based composite membranes were prepared by immersion precipitation method by using poly(N,N-dimethylaminoethyl methacrylate)-grafted silica (PDMAEMA@SiO₂) nanoparticles as hydrophilic additives. The molecular weight of PDMAEMA were controlled by the surface initiated atom transfer radical polymerization of N,N-dimethylaminoethyl methacrylate on SiO₂ nanoparticles. The synthesized nanoparticles have a typical core–shell structure as characterized in detail by FT-IR, TEM, DLS and GPC. The prepared PAN-based composite membranes have higher porosity and water permeation flux than those of the pure PAN membranes. They also show high rejection (⩾90%) to bovine serum albumin and high flux recovery ratio (⩾90%) to water permeation. These improved performances are attributed to the good hydrophilicity of PDMAEMA@SiO₂ nanoparticles. The results suggest that PDMAEMA@SiO₂ nanoparticles are suitable for the property optimization of PAN-based composite membranes.     

Electrospinning silica/polyvinylpyrrolidone composite nanofibers

Small diameter nanofibers of silica and silica/polymer are produced by electrospinning silica/polyvinylpyrrolidone (SiO₂/PVP) mixtures composed of silica nanoparticles dispersed in polyvinylpyrrolidone solutions. By controlling various parameters, 380 ± 100 nm diameter composite nanofibers were obtained with a high silica concentration (57.14%). When the polymer concentration was low, “beads‐on‐a‐string” morphology resulted. Nanofiber morphology was affected by applied voltage and relative humidity. Tip‐to‐collector distance did not affect the nanofiber diameter or morphology, but it did affect the area and thickness of the mat. Heat treatment of the composite nanofibers at 200°C crosslinked the polymer yielding solvent‐resistant composite nanofibers, while heating at 465°C calcined and selectively removed the polymer from the composite. Crosslinking did not change the nanofiber diameter, while calcined nanofibers decreased in diameter (300 ± 90 nm) and increased in surface area to volume ratio. Nanofibers were characterized by scanning electron microscopy (SEM) and thermogravimetric analysis (TGA). © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40966.     

Compatibilization of immiscible blends of polypropylene and isosorbide containing copolyester with silica nanoparticles

In the present study, compatibilization of immiscible blends of polymers was investigated based on the Pickering emulsion concept with various mixing procedures. Silica nanoparticles were incorporated into poly (1,4-cyclohexanedimethylene isosorbide terephthalate) (PEICT)/isotactic polypropylene (iPP) blends. Localization of nanoparticles was effectively modified by varying mixing procedures. Relocation of hydrophilic silica occurred in a secondary mixing procedure with the PEICT, which has relatively high affinity when primarily mixed with iPP. The final location of the silica nanoparticles was confirmed by SEM images. SEM and an optical microscope were used to follow morphological change. By simply changing the mixing procedure, the hydrophilic silica nanoparticles were able to perform the role of a morphology modifier successfully without modifying the surface characteristics. The mechanical properties and crystallization behavior were also compared depending on the surface characteristics of the silica nanoparticles and their final localization.     

Preparation of superhydrophobic nanocomposite fiber membranes by electrospinning poly(vinylidene fluoride)/silane coupling agent modified SiO2 nanoparticles

Superhydrophobic nanocomposite fiber membranes were prepared by blend electrospinning of poly(vinylidene fluoride) (PVDF) mixed with silane coupling agent modified SiO₂ nanoparticles. The nanoparticles were prepared by the sol–gel method, and the average particle diameter was measured by dynamic light scattering (DLS) and transmission electron microscopy (TEM). The effects of the type of silane coupling agent, such as n‐octyltriethoxysilane, vinyltrimethoxysilane (A‐171), and vinyltriethoxysilane (A‐151), and the mass ratio of the modified silica particles and PVDF on the surface wettability of the composite fiber membrane were investigated. The results indicated that the incorporation of silane coupling agent modified silica particles into the PVDF membrane increased the roughness of the surface and formed micro/nano dual‐scale structure compared to the pristine PVDF membrane, which was responsible for the superhydrophobicity and self‐cleaning property of the nanocomposite fiber membranes. The value of water contact angle (CA) increased with the increase of the content of modified SiO₂ nanoparticles in the nanocomposite membrane, ranging from 149.8° to 160.1° as the mass ratio of modified 170 nm SiO₂ with PVDF matrix increased from 0.5:1 to 5:1, indicating the membrane possesses a superhydrophobic surface. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44501.     

Studies on mechanical,rheological, thermal and morphological properties of in situ silica-filled butadiene rubber composites

Silica is introduced in butadiene rubber (BR) in situ by solution sol–gel method at low and high content. This results in uniformly dispersed spherically shaped silica in rubber matrix as revealed from Scanning electron microscopy study. Incorporation of in situ silica imparts moderate reinforcement to BR composite. Mechanical property and silica distribution are eventually improved by using a silane coupling agent as a surface modifier. Thermal, rheological, morphological, mechanical and melting behaviours of the composites are evaluated and analysed in a comparative manner.     

Poly(vinylidene fluoride) ultrafiltration membranes containing hybrid silica nanoparticles: Preparation,characterization and performance

Poly(vinylidene fluoride) (PVDF) ultrafiltration membranes were prepared by immersion precipitation method using poly(hydroxyethyl methacrylate)-block-poly(methyl methacrylate) grafted silica (PHEMA-b-PMMA@SiO₂) nanoparticles as additives. The hybrid nanoparticles were synthesized by the surface initiated atom transfer radical polymerization (SI-ATRP), and they were characterized in detail by FT-IR, TEM, DLS and GPC. Results confirm that core–shell structure is formed after grafting PHEMA-b-PMMA brushes on the silica nanoparticles. Their average hydrodynamic diameter also increases with the prolongation of grafting time. After blending PVDF with the hybrid silica nanoparticles, the composite PVDF membranes exhibit high porosity and improved water permeation. Especially, when the molecular weight is 1.73 × 10⁵ g/mol for PHEMA-b-PMMA on the hybrid nanoparticles, the water flux of the PVDF composite membrane is 2.5 times than that of the control PVDF membrane, while the rejection to bovine serum albumin (BSA) remains at a high level (>90%). In addition, all the composite PVDF membranes show lower BSA adsorption and larger water flux recovery ratio than the control PVDF membrane. The improvement of membrane performance is attributed to the good hydrophilicity of PHEMA-b-PMMA@SiO₂ nanoparticles. Our results suggest that PHEMA-b-PMMA@SiO₂ nanoparticles with moderate molecular weight of PHEMA-b-PMMA are suitable for the property optimization of PVDF-based composite membranes.     

Synthesis and characterization of nanosilica/polyacrylate composite latex

The nanosilica/polyacrylate organic–inorganic composite latex was synthesized by in‐situ emulsion polymerization of methyl methacrylate (MMA) and butyl acrylate (BA) in the presence of silica nanoparticles, which were modified by silane coupling agent. The surface properties and dispersibility of silica nanoparticles modification, chemical structure, Zeta potential, diameter distribution of the composite latex prepared, surface roughness, and thermal stability of the hybrid film formed by the composite latex were investigated by fourier transform infrared spectrometer (FTIR), transmission electron microscopy (TEM), Zeta meter, ZetaPlus apparatus (dynamic light scattering method), atomic force microscopy (AFM), and thermogravimetric analysis (TGA), respectively. After modification with silane coupling agent, silane was grafted onto the surface of silica nanoparticles to form the organic layers, which was able to efficiently prevent the silica nanoparticles from aggregating to individually homogeneous disperse in the in‐situ emulsion polymerization system and improve the compatibility of silica nanoparticles with the acrylate monomers. The nanosilica/polyacrylate organic–inorganic composite latex prepared had the properties of silica nanoparticles and pure polyacrylate latex but was not simply a combination. Strong chemical bonding tethered the silica and acrylate chains to form the core/shell structural composite latex. Consequently, the hybrid film formed by nanosilica/polyacrylate composite latex exhibited a smooth surface and better thermal properties than the pure polyacrylate film. POLYM. COMPOS. 27:282–288, 2006. © 2006 Society of Plastics Engineers     

Improvement of interfacial interaction,dispersion, and properties of chlorosulfonated polyethylene/sio2 nanocomposites using CSPE‐g‐Sio2 nanoparticles synthesized under ultrasonics

Chlorosulfonated polyethylene (CSPE) is a widely used elastomer because of the resistance to gases and aggressive chemicals, fire‐retarding, and electric insulating properties. Silica nanoparticles were usually introduced into the elastomer to improve its critical properties. However, there were some problems of strong aggregation and poor dispersion of nanoparticles in the nanocomposites. In this work, an efficient approach of grafting matrix CSPE onto silica surface was proposed to solve the problems. CPSE‐g‐SiO₂ nanoparticles were prepared via an in situ radical reaction between  Cl in CSPE and Si OH on silica surface under ultrasonics. The successful chemical graft reaction was confirmed using Fourier transform infrared, ultraviolet–visible spectroscopy, ¹H‐NMR, and X‐ray photoelectron spectroscopy. Thermogravimetric analysis indicated that the grafting amount of CSPE was 4.68 wt%. Grafting CSPE onto silica surface significantly improved the dispersion of CSPE‐g‐SiO₂ nanoparticles in CSPE matrix and the interfacial interaction. Therefore, the mechanical, thermal stability, damping capacity, and rheology properties of CSPE/CSPE‐g‐SiO₂ nanocomposites were improved. POLYM. COMPOS., 2012. © 2012 Society of Plastics Engineers     

Morphologically dependent alternating‐current and direct‐current breakdown strength in silica–polypropylene nanocomposites

In this article, we report the synthesis of a new bimodal surface ligand morphology on silica nanoparticles. Combining grafting‐to and grafting‐from approaches, in this study, we demonstrated the efficacy of anthracene surface modification for improving the dielectric breakdown strength (DBS) under alternating‐current and direct‐current conditions and that of a matrix‐compatible polymer brush for controlling the nanofiller (NF) dispersion. Ligand‐modified spherical colloidal SiO₂ nanoparticles (～14 nm in diameter) were mixed into polypropylene, and the resulting dispersion was improved over the unmodified particles, as shown with transmission electron microscopy. The results suggest that the electronic structure of the anthracene‐modified particle surface was critical to the improvement in DBS. In addition, the DBS of the composite was shown to depend on the dispersion state of the filler and the mode of stress; this indicated that the individually dispersed nanoparticles were not necessarily the optimal morphology for all stress conditions. Additionally, the precise nature of the matrix‐compatible brush was less important than the NF dispersion it produced. The bimodal grafted architectural design has provided a promising solution for the control of the dispersion and surface properties, especially for high‐molecular‐weight polymer matrices. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 44347.