Mussel‐inspired magnetic adsorbent: Adsorption/reduction treatment for the toxic Cr(VI) from simulated wastewater

A novel magnetic adsorbent, poly(catechol‐1,4‐butanediamine)‐coated Fe₃O₄ composite (Fe₃O₄@PCBA), was successfully fabricated via an easy and gentle method according to the mussel‐inspired adhesion property of polydopamine. Effects of many factors on the adsorption performance of Fe₃O₄@PCBA for Cr(VI) were investigated, including temperature, pH value, contacting time, adsorbent dosage, and initial Cr(VI) concentration. The thermodynamics, adsorption isotherm, kinetics, and intraparticle diffusion of adsorption were also studied systematically. Results indicated that the removal rate of Cr(VI) was approximately close to 100% when the initial concentration was less than 120 mg/L, and the maximum uptake capacity of Fe₃O₄@PCBA for Cr(VI) was 280.11 mg/g complied with Langmuir isotherm model. Accordingly, the nocuous Cr(VI) could be partially reduced to Cr(III) during the adsorption period. Hopefully, this strategy could be extended to prepare series of magnetic Fe₃O₄@catechol–amine adsorbents with different amino and phenolic hydroxyl groups for Cr(VI) removal. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46530.     

Removal of Cr(VI) from aqueous solution using amino‐modified Fe3O4–SiO2–chitosan magnetic microspheres with high acid resistance and adsorption capacity

A novel, bioadsorbent material of polyethylenimine‐modified magnetic chitosan microspheres enwrapping magnetic silica nanoparticles (Fe₃O₄–SiO₂–CTS‐PEI) was prepared under relatively mild conditions. The characterization results indicated that the adsorbent exhibited high acid resistance and magnetic responsiveness. The Fe₃O₄ loss of the adsorbent was measured as 0.09% after immersion in pH 2.0 water for 24 h, and the saturated magnetization was 11.7 emu/g. The introduction of PEI obviously improved the adsorption capacity of Cr(VI) onto the adsorbent by approximately 2.5 times. The adsorption isotherms and kinetics preferably fit the Langmuir model and the pseudo‐second‐order model. The maximum adsorption capacity was determined as 236.4 mg/g at 25°C, which was much improved compared to other magnetic chitosan materials, and the equilibrium was reached within 60 to 120 min. The obtained thermodynamic parameters revealed the spontaneous and endothermic nature of the adsorption process. Furthermore, the Cr(VI)‐adsorbed adsorbent could be effectively regenerated using a 0.1 mol/L NaOH solution, and the adsorbent showed a good reusability. Due to the properties of good acid resistance, strong magnetic responsiveness, high adsorption capacity, and relatively rapid adsorption rate, the Fe₃O₄–SiO₂–CTS‐PEI microspheres have a potential use in Cr(VI) removal from acidic wastewater. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43078.     

Modulation of electromagnetic wave absorption by carbon shell thickness in carbon encapsulated magnetite nanospindles–poly(vinylidene fluoride) composites

A series of Fe₃O₄/C core–shell nanospindles with different shell thickness have been synthesized by a wet chemical method and subsequent high-temperature carbonization. The thickness of carbon shell can be well adjusted from 9 to 32 nm by changing the addition amounts of resorcinol and formaldehyde precursors during the coating process. Structure and morphology characterizations reveal that the carbon shell is amorphous structure and uniformly encapsulates on porous Fe₃O₄ nanospindles. For the first time, a flexible Fe₃O₄/C/poly(vinylidene fluoride) (PVDF) composite absorber was prepared by embedding the core–shell Fe₃O₄/C nanospindles in PVDF matrix. The electromagnetic properties of the composite show strong dependence on the carbon-shell thickness. The impedance matching for electromagnetic absorption is improved by the synergy effect between Fe₃O₄ nanospindles and encapsulated carbon shell. The Fe₃O₄/C/PVDF composite with thick carbon shell exhibits strong electromagnetic wave absorbing ability with thin absorber thickness. The minimum reflection loss for the absorber with thickness of 2.1 mm can reach −38.8 dB.     

Enhanced adsorptive removal of Cr(VI) in aqueous solution by polyethyleneimine modified palygorskite

Polyethyleneimine (PEI) modified palygorskite (Pal) was used for the adsorption of Cr(VI) in aqueous solution. The absorbent was characterized by Fourier transform infrared spectroscopy (FT-IR) and thermogravimetric analysis (TGA). Characterized results confirmed that the Pal has been successfully modified by PEI. The modification of PEI increased the Cr(VI) adsorption performance of the Pal by the adsorption combined reduction mechanism, and amino groups of the adsorbent play the main role in the enhanced Cr(VI) adsorption. The maximum adsorption capacity was 51.10 mg·g⁻¹ at pH 4.0 and 25 °C. The adsorption kinetics of Cr(VI) on the adsorbent conforms to the Langmuir isotherm model. The maximum adsorption occurs at pH 3, and then the adsorption capacity of PEI-Pal was decreased with the increase of pH values. The adsorption kinetics of Cr(VI) on PEI-Pal was modeled with pseudo-second-order model. The addition of Cl⁻, SO₄²⁻ and PO₄³⁻ reduced the Cr(VI) adsorption by competition with Cr(VI) for the active sites of PEI-Pal. The Cr(VI) saturated PEI-Pal can be regenerated in alkaline solution, and the adsorption capacity can still be maintained at 30.44 mg·g⁻¹ after 4 cycles. The results demonstrate that PEI-Pal can be used as a potential adsorbent of Cr(VI) in aqueous solutions.     

Enhanced catalytic oxidation via nano Cu0.5Mg0.5Fe2O4 embedded in CNTs for adsorption–reduction of hexavalent chromium

A catalyst consisting of Cu_0.5Mg_0.5Fe₂O₄ (CMF) supported on carbon nanotubes (CNTs) which exhibits great potential as an adsorbent for treating Cr(VI)-contaminated wastewater has been successfully prepared. The ferrite possesses excellent magnetic properties, while CNTs have the advantage of a large surface area. This composite material not only prevents the aggregation of magnetic materials and enhances the exposure of active sites but also effectively solves the recycling problem of CNTs. Our results show that the adsorption capacity of Cu_0.5Mg_0.5Fe₂O₄–carbon nanotubes (CMF-CNTs) for Cr(VI) wastewater (45.60 mg/g) is 1.49 times higher than that of Cu_0.5Mg_0.5Fe₂O₄ (30.48 mg/g). Compared to a single catalyst, CMF-CNTs not only improve the dispersibility of magnetic materials but also exhibit synergistic effects between the composite materials, enhancing the chemical adsorption capacity. After five consecutive adsorption and desorption experiments, the adsorption capacity of CMF-CNTs remains at 88% of its initial value. Furthermore, the study of the catalyst before and after adsorption by XPS reveals that the valence state transition of Fe³⁺/Fe²⁺ and Cu²⁺/Cu⁺ plays a crucial role in the adsorption process. The results of this study demonstrate the potential of using waste materials for effective wastewater treatment and provide insights into the development of new adsorbents for pollutant removal.     

One-step solvothermal synthesis of Fe3O4@Carbon composites and their application in removing of Cr (VI) and Congo red

Fe₃O₄ @C nano-adsorption was prepared by a simple one-step solvothermal synthesis method using Fe (NO₃)₃ 、cyclodextrin as raw materials, meanwhile urea as an alkali source. The obtained samples were characterized by X-ray diffraction, Raman spectroscopy, transmission electron microscopy, scanning electron microscopy, and Brunauer-Emmett-Teller. The adsorption behavior of the Fe₃O₄@C toward Cr (VI) and Congo red was also studied. The core-shell structure Fe₃O₄@C exhibited large specific surface area of 112.91?m² g^?1. The prepared Fe₃O₄@C samples demonstrated typical ferromagnetic behavior and high removal capacity in removing the toxic Cr (VI) ions and organic pollutant CR from wastewater, together with facile magnetic separability and good recyclability. Equilibrium adsorption performance was conducted by using the Langmuir and Freundlich model and Freundlich model could simulate the adsorption process of Congo red and Cr (VI) better. The maximum adsorption capacity of Cr (VI) and Congo red was 33.35?mg?g^?1 and 262.72?mg?g^?1 by calculation.     

Magnetite/graphene/polyaniline composite for removal of aqueous hexavalent chromium

Here, we report the synthesis of Fe₃O₄/G/PANI composite containing magnetite nanoparticles (Fe₃O₄), graphene sheets (G), and polyaniline (PANI) via chemical route for removal of toxic Cr (VI) from water. TEM image shows the formation of uniformly distributed magnetite nanoparticles on graphene/PANI composite. HRTEM images shows the formation of crystalline magnetite nanoparticles showing lattice fringes with inter‐planner distance 0.21 nm. The magnetic measurement shows magnetization 22 emu/g and ferromagnetic property of the adsorbent. The equilibrium adsorptions were well‐described by the Langmuir isotherm model and shows maximum adsorption capacity 153.54 mg/g at pH 6.5 and temperature 30 °C. The kinetics data well fitted by pseudo‐second‐order model and around 86% Cr (VI) removal completed within 20 min. The Cr (VI) removal capacitive decreases with increase in pH and ionic strength. The adsorbent shows leaching of iron nanoparticles at pH 1 whereas stable in solution having pH 2 and more. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 44002.     

Synthesis,characterization of Fe3O4@glycine doped polypyrrole magnetic nanocomposites and their potential performance to remove toxic Cr(VI)

Fe₃O₄ coated glycine doped polypyrrole magnetic nanocomposite (Fe₃O₄@gly-PPy NC) was prepared via coating of suspended Fe₃O₄ nanoparticles with gly-PPy. FE-SEM and HR-TEM images indicated that Fe₃O₄ nanoparticles were encapsulated by precipitating gly-PPy moieties. Chromium(VI) adsorption followed a Langmuir isotherm with maximum capacity of 238–303 mg/g for a temperature range of 25–45 °C at pH 2. The adsorption process was governed by the ionic interaction and the reduction of Cr(VI) to Cr(III) by the PPy moiety. Results showed that NCs are effective adsorbents for the removal of Cr(VI) from wastewater and can be separated by external magnetic field from the reactor.     

Superparamagnetic polyvinylpyrrolidone/chitosan/Fe3O4 electrospun nanofibers as effective U(VI) adsorbents

Magnetoactive electrospun fibrous membranes consisting of polyvinylpyrrolidone (PVP), chitosan (CS) and pre-fabricated, double-layer oleic acid-coated magnetite nanoparticles (OA.OA.Fe₃O₄) were fabricated and evaluated as new adsorbent materials for the removal and recovery of uranium (U(VI)) from aqueous solutions. The adsorption has been investigated by batch-type experiments and the solid material has been characterized by X-ray diffraction spectroscopy (XRD), Fourier-transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), transmission electron microscopy/energy dispersive X-ray analysis (TEM/EDX) and vibration sample magnetometry (VSM) measurements prior and after uranium adsorption. The experimental adsorption data were found to be well fitted with the Langmuir isotherm and the pseudo-second order kinetic model. The results indicate that PVP/CS/OA.OA.Fe₃O₄ fibrous adsorbents exhibit good adsorption properties towards U(VI) in aqueous solutions, achieving a q_max value of 0.77 mol kg⁻¹ (183.3 mg g⁻¹) at pH 6.0. The experiments regarding the regeneration and reuse of the magnetoactive adsorbents were carried out using Na₂CO₃, at pH ~11. After four cycles, the percentage relative adsorption remained stable (~100%) whereas the desorption percentage decreased from 31.9% to 21.0%. Generally, the presented results demonstrate that the incorporation of the Fe₃O₄ NPs has a positive effect on the adsorption efficiency of U(VI) from aquatic environments.     

Simultaneous adsorption of aniline and Cr(VI) ion by activated carbon/chitosan composite

Activated carbon/chitosan composite has been used as an adsorbent to remove aniline and Cr(VI) ions from aqueous solutions simultaneously. The effects of preparation conditions such as the ratio of activated carbon to chitosan, crosslinking reagents, crosslinking time, and adsorption conditions including adsorbent dosage, pH value of solution, and contact time on simultaneous adsorption of aniline and Cr(VI) ion were investigated. Experimental results showed that epichlorohydrin was the proper crosslinking reagent, and the ratio of activated carbon to chitosan was kept at 1. When the adsorbent dosage was 4.0 g/L, and the concentrations of aniline and Cr(VI) were lower than 50 and 100 mg/L, respectively, both aniline and Cr(VI) were simultaneously removed at natural pH with high removals (>95%). The presence of Cr(VI) enhanced the adsorption of aniline, while the presence of aniline almost had no influence on the adsorption of Cr(VI). The adsorption processes of both aniline and Cr(VI) followed the pseudo‐second‐order kinetics model, but the sorption of Cr(VI) was preferential to that of aniline by this composite. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39903.     

Fe2+-modified Vermiculite for the Removal of Chromium (VI) from Aqueous Solution

A novel adsorbent: Fe²⁺-modified vermiculite was prepared in a two-step reaction. Adsorption experiments were carried out as a function of pH, contact time, and concentration of Cr(VI). It was found that Fe²⁺-modified vermiculite was particularly effective for the removal of Cr(VI) at pH 1.0. The adsorption of Cr(VI) reached equilibrium within 60 min, and the pseudo-second-order kinetic model best described the adsorption kinetics. The adsorption data follow the Langmuir model more than the Freundlich model. At pH 1.0, the maximum Cr(VI) sorption capacity (Q _max ) was 87.72 mg · g^?1. Desorption of Cr(VI) from Fe²⁺-modified vermiculite using NaOH treatment exhibited a higher desorption efficiency by more than 80%. The sorption mechanisms including electrostatic interaction and reduction were involved in the Cr (VI) removal. The results showed that Fe²⁺-modified vermiculite can be used as a new adsorbent for Cr(VI) removal which has a higher adsorption capacity and a faster adsorption rate.     

Polypyrrole/NiFe2O4 composites with improved hexavalent chromium removal from aqueous solution

Polypyrrole/NiFe₂O₄ (PPy/NiFe₂O₄) composites were prepared by ultrasonic oxidative polymerization in the presence of NiFe₂O₄ nanoparticles (NPs). The nanostructure of PPy/NiFe₂O₄ was confirmed by the X‐ray diffraction (XRD), scanning electron microscope (SEM), transmission electron microscope (TEM), and vibrating sample magnetometer (VSM) examinations. The adsorption of Cr(VI) onto the PPy/NiFe₂O₄ composite was lowly pH dependent and the adsorption kinetics followed the Pseudo‐second‐order model. The Langmuir isothermal model well described the adsorption isotherm data and the maximum adsorption capacity increased with the increase of temperature. The maximum adsorption capacity of the PPy/NiFe₂O₄ for Cr(VI) ions was up to 50 mg/g at pH 2.0. The excellent adsorption characteristic of PPy/NiFe₂O₄ composite will render it a highly efficient and economically viable adsorbent for Cr(VI) ions removal. POLYM. COMPOS., 38:2779–2787, 2017. © 2015 Society of Plastics Engineers     

Fe3O4 nanoparticles encapsulated in electrospun porous carbon fibers with a compact shell as high-performance anode for lithium ion batteries

Fe₃O₄ nanoparticles encapsulated in porous carbon fibers (Fe₃O₄@PCFs) as anode materials in lithium ion batteries are fabricated by a facile single-nozzle electrospinning technique followed by heat treatment. A mixed solution of polyacrylonitrile (PAN) and polystyrene (PS) containing Fe₃O₄ nanoparticles is utilized to prepare hybrid precursor fibers of Fe₃O₄@PS/PAN. The resulted porous Fe₃O₄/carbon hybrid fibers composed of compact carbon shell and Fe₃O₄-embeded honeycomb-like carbon core are formed due to the thermal decomposition of PS and PAN. The Fe₃O₄@PCF composite demonstrates an initial reversible capacity of 1015 mAh g⁻¹ with 84.4% capacity retention after 80 cycles at a current density of 0.2 A g⁻¹. This electrode also exhibits superior rate capability with current density increasing from 0.1 to 2.0 A g⁻¹, and capacity retention of 91% after 200 cycles at 2.0 A g⁻¹. The exceptionally high performances are attributed to the high electric conductivity and structural stability of the porous carbon fibers with unique structure, which not only buffers the volume change of Fe₃O₄ with the internal space, but also acts as high-efficient transport pathways for ions and electrons. Furthermore, the compact carbon shell can promote the formation of stable solid electrolyte interphase on the fiber surface.     

Constructing three-dimensional Li-transport channels within the Fe3O4@SiO2@RGO composite to improve its electrochemical performance in Li-ion batteries

Magnetite Fe₃O₄ particles are usually pulverized when used as the anode material for Li-ion batteries and thus the solid electrolyte interface film grows on the surface progressively, leading to inferior cycling performance and poor rate capability. To solve these issues, core-shell Fe₃O₄@SiO₂ particles are wrapped by reduced graphene oxide (RGO), and meso-/micro-pores are produced not only in the SiO₂ layers but also in the RGO nanosheets by chemical etching, forming three-dimensional (3D) continuous channels for Li⁺ transportation. Benefiting from this unique structure, the as-prepared Fe₃O₄@mSiO₂@RGO composite can deliver a capacity of 1630 mA h g⁻¹ at 0.1 A g⁻¹ over the potential range of 0.01–3.00 V (vs. Li⁺/Li) in the first discharge along with an initial coulombic efficiency of 86%, and can retain the capacity of 514 mA h g⁻¹ at 5 A g⁻¹ after 1000 cycles, exhibiting an outstanding rate capability and a long-term span life. The results indicate that pseudocapacitive behavior enables this composite to charge/discharge fast while the porous SiO₂ shell and RGO nanosheets effectively accommodate the volume change of the Fe₃O₄ particles during cycling. Our findings provide a feasible strategy for improving the electrochemical properties of the Fe₃O₄ anode in Li-ion batteries.     

In situ preparation of magnetic Fe3O4.Cu2O.Fe3O4/cryogel nanocomposite powder via a reduction–coprecipitation method as adsorbent for methylene blue water pollutant

Magnetic nanocomposites have attracted great attention as adsorbents for the removal of water pollutants, which respond to an external magnet that is used to remove both pollutants and composite nanomaterial traces from water. They are environmentally friendly and effective adsorbents for water treatment. In this respect, a simple in situ preparation method was used to prepare cryogel powder composite based on Fe₃O₄.Cu₂O.Fe₃O₄ nanomaterials. The ionic cryogel based on 2‐acrylamido‐2‐methylpropane sulfonate sodium salt and styrene sulfonate sodium salt was prepared by crosslinking polymerization at low temperature. The new magnetic nanoparticles based on Fe₃O₄.Cu₂O.Fe₃O₄ were successfully prepared inside the cryogel networks by a simple reduction–coprecipitation method based on reaction of Fe³⁺ with sodium sulfite and Cu²⁺ in the presence of hydroxylamine and ammonia solution. The thermal stability, accurate Fe₃O₄.Cu₂O.Fe₃O₄ content, magnetic properties, crystal lattice structure, particle sizes and morphology of the prepared cryogel composite were evaluated. The optimum conditions such as pH, contact time, adsorbate concentrations, adsorption equilibrium and adsorption kinetics were investigated to determine the efficiency of the prepared composite as an adsorbent to remove toxic methylene blue (MB) pollutant from aqueous solution. The data for MB adsorption confirmed the high ability of the prepared composite to remove more than 4.696 mmol L^?1 of MB from water during 6 min. The regeneration and reuse experiments showed excellent data for the synthesized new dye as an effective adsorbent for water treatment. © 2018 Society of Chemical Industry     

Removal of chromium(VI) from aqueous solutions using polypyrrole-based magnetic composites

PPy/Fe₃O₄/AgCl composites were prepared via in situ polymerization for the removal of highly toxic Cr(VI). The structure and morphology of the prepared composites were characterized by the XRD, SEM, TEM, and VSM examinations. Up to 100 % removal was found with 1000 mg/L Cr(VI) aqueous solution at pH 2.0. The process of Cr(VI) ions’ adsorption was easy to reach equilibrium at higher temperatures. Adsorption results showed that Cr(VI) removal efficiency by the composites decreased with an increase in pH. Adsorption kinetics was described by the pseudo-second-order rate model. Isotherm data fitted well to the Langmuir isotherm model. Desorption experiment showed that the regenerated adsorption of PPy/Fe₃O₄/AgCl can be reused successfully for three times successive adsorption–desorption cycles without appreciable loss of its original capacity.     

As(V) removal using a magnetic layered double hydroxide composite

The Mg–Fe–Zr layered double hydroxide/Fe₃O₄ composite was synthesized by co-precipitation of layered double hydroxide (LDH) precursors in the presence of Fe₃O₄ particles and its arsenic adsorption behavior was investigated. The material characterization by XRD, TEM, surface area analysis, SEM-EDX, and VSM revealed that the composite was comprised of Fe₃O₄ particles covered by an LDH. The As(V) adsorption capacity of the composite (188 mg/g) was achieved at pH 3. The kinetics studies and adsorption isotherms suggested a two-stepped adsorption mechanism of the monolayer adsorption inside the interlayers of LDH.     

Comparison of Cr(VI) Adsorption Using Synthetic Schwertmannite Obtained by Fe3+ Hydrolysis and Fe2+ Oxidation: Kinetics,Isotherms and Adsorption Mechanism

Good sorption properties and simple synthesis route make schwertmannite an increasingly popular adsorbent. In this work, the adsorption properties of synthetic schwertmannite towards Cr(VI) were investigated. This study aimed to compare the properties and sorption performance of adsorbents obtained by two methods: Fe³⁺ hydrolysis (SCH_A) and Fe²⁺ oxidation (SCH_B). To characterise the sorbents before and after Cr(VI) adsorption, specific surface area, particle size distribution, density, and zeta potential were determined. Additionally, optical micrographs, SEM, and FTIR analyses were performed. Adsorption experiments were performed in varying process conditions: pH, adsorbent dosage, contact time, and initial concentration. Adsorption isotherms were fitted by Freundlich, Langmuir, and Temkin models. Pseudo-first-order, pseudo-second-order, intraparticle diffusion, and liquid film diffusion models were used to fit the kinetics data. Linear regression was used to estimate the parameters of isotherm and kinetic models. The maximum adsorption capacity resulting from the fitted Langmuir isotherm is 42.97 and 17.54 mg·g⁻¹ for SCH_A and SCH_B. Results show that the adsorption kinetics follows the pseudo-second-order kinetic model. Both iron-based adsorbents are suitable for removing Cr(VI) ions from aqueous solutions. Characterisation of the adsorbents after adsorption suggests that Cr(VI) adsorption can be mainly attributed to ion exchange with SO₄²⁻ groups.     

Synthesis and properties of magnetite nanoparticles with peroxide-containing polymer shell and nanocomposites based on them

Magnetite nanoparticles (Fe₃O₄ NPs) with peroxide-containing polymer shell have been synthesized using the method of coprecipitation from the mixture solutions of Fe (II) and Fe (III) salts in the presence of peroxide-containing copolymer (PCC). Polymer shell presence has been proved by elemental and complex thermal analysis. Synthesized Fe₃O₄ NPs possess superparamagnetic properties. Their specific saturation magnetization decreases gradually from 65 to 54 A·m²·kg⁻¹ with increasing PCC concentration owing to the surface spin pinning effect caused by a polymer shell. The average sizes of Fe₃O₄ NPs estimated from the data of XRD analysis and magnetic measurements are in the range of 9–12 nm. The NP sizes determined by the DLS method lie in the range of 150–270 nm; this result is significantly larger than the sizes estimated by the two aforementioned methods evidencing a tendency for Fe₃O₄ NPs toward self-association. Cross-linked composite films based on polyvinyl alcohol have been obtained via radical curing initiated by the PCC shell of nanoparticles. The resulting composite films are magnetically sensitive films with rather high physico-mechanical properties (tensile strength reaches 48–67 MPa and relative elongation – 4%–21% depending on cross-linking degree), a priori non-toxic and biocompatible, which makes them promising materials for various applications.     

Removal of Cr(VI) from aqueous solution using magnetite/non-oxidative graphene composites: Synergetic effect of Cr(VI) on dyes removal

Non-oxidative graphene (nOG) synthesized from natural graphite powder was modified with magnetite (Fe₃O₄) for removal of Cr(VI) and dyes in aqueous solution. The adsorption behavior of Cr(VI) on Fe₃O₄/nOG (M-nOG) was systematically investigated, and the simultaneous adsorption of Cr(VI) and dyes such as methylene blue (MB) and rhodamine B (RhB) was evaluated. Adsorption kinetic and isotherm of Cr(VI) were fitted well with pseudo-second-order model and Sips model, respectively. For the binary system, Cr(VI) removal was not affected with increasing the dye concentration, whereas the adsorption capacity of both MB and RhB was enhanced with increasing the concentrations of Cr(VI).