Phase separation of poly(ether sulfone imide) modified epoxy resin

Poly(ether sulfone imide)s (PEI) with molecular weight M_n ∼ 10⁴ were synthesized from 3,3′,4,4′-benzophenone tetracarboxylic dianhydride and amine terminated poly(ether sulfone) having molecular weights ranging from M_n ∼ 400 to M_n ∼ 4000. Thus, the PEIs had the same molecular weight but various imide and ether sulfone contents. The PEIs were mixed with a stoichiometric mixture of diglycidyl ether bis-phenol-A (DGEBA)/diamino diphenyl sulfone (DDS). The effect of PEI on the curing reaction of DGEBA/DDS and the morphology of the polymer blend were studied by differential scanning calorimetry (DSC) and optical microscopy. In the DGEBA/DDS/PEI blend with a fixed PEI molecular weight and PEI concentration but with various imide content, the experimental data revealed the PEI with a higher content of ether sulfone had a lower T_g and a better compatibility with solvents and epoxy resins; the curing reaction rate of DGEBA/DDS/PEI was faster for PEI with a higher imide content; the DSC data of cured DGEBA/DDS/PEI showed two T_gs, indicating phase separation between PEI and cured epoxy resins; and the data of optical microscopy showed that the compatibility of PEI with epoxy resins increased with the content of ether sulfone in PEI. © 1996 John Wiley & Sons, Inc.     

Preparation and thermal,electrical, and morphological properties of multiwalled carbon nanotubeand epoxy composites

Multiwalled carbon nanotube (MWCNT)/epoxy composites are prepared, and the characteristics and morphological properties are studied. Scanning electron microscopy microphotographs show that MWCNTs are dispersed on the nanoscale in the epoxy resin. The glass‐transition temperature (T_g) of MWCNT/epoxy composites is dramatically increased with the addition of 0.5 wt % MWCNT. The T_g increases from 167°C for neat epoxy to 189°C for 0.5 wt % CNT/epoxy. The surface resistivity and bulk resistivity are decreased when MWCNT is added to the epoxy resins. The surface resistivity of CNT/epoxy composites decreases from 4.92 × 10¹² Ω for neat epoxy to 3.03 × 10⁹ Ω for 1 wt % MWCNT/epoxy. The bulk resistivity decreases from 8.21 × 10¹⁶ Ω cm for neat epoxy to 6.72 × 10⁸ Ω cm for 1 wt % MWCNT/epoxy. The dielectric constant increases from 3.5 for neat epoxy to 5.5 for 1 wt % MWCNT/epoxy. However, the coefficient of thermal expansion is not affected when the MWCNT content is less than 0.5 wt %. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 1272–1278, 2007     

Lap shear strength and thermal stability of diglycidyl ether of bisphenol a/epoxy novolac adhesives with nanoreinforcing fillers

Nanoreinforcing fillers have shown outstanding mechanical properties and widely used as reinforcing materials associated to polymeric matrices for high performance applications. In this study, a series of multiwalled carbon nanotubes (MWCNTs)‐, nano‐Al₂O₃‐, nano‐SiO₂‐, and talc‐reinforced epoxy resin adhesives composites were developed. The influence of different types and contents of nanofillers on adhesion, elongation at break, and thermal stability (under air and nitrogen atmospheres) of diglycidyl ether of bisphenol A (DGEBA)/epoxy novolac adhesives was investigated. A simple and effective approach to prepare adhesives with uniform and suitable dispersion of nanofillers into epoxy matrix was found to be mechanical stirring combined with ultrasonication. Transmission electron microscopic and scanning electron microscopic investigations revealed that nanofillers were homogeneously dispersed in epoxy matrix at optimized nanofiller loadings. Adhesion strength was measured by lap shear strength test as a function of nano‐Al₂O₃ and MWCNTs loadings. The results indicated that the lap shear strength was significantly increased by about 50% and 70% with addition of MWCNTs and nano‐Al₂O₃ up to a certain level, respectively. The highest lap shear strength was reached at 1.5 wt % of nano‐Al₂O₃ loading. MWCNTs at all loadings (except 3 wt %) and nano‐Al₂O₃ have enhanced onset of degradation temperature and char yield of the adhesives. By combined incorporation of 0.75 wt % nano‐Al₂O₃ and 0.75 wt % MWCNTs into the epoxy novolac/DGEBA blend adhesives a synergistic effect was observed in the thermal stability of the adhesives at high temperatures (800°C). © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2014 , 131, 40017.     

Chemical surface coating of MWCNTs with riboflavin and its application for the production of poly(ester‐imide)/MWCNTs composites containing 4,4′‐thiobis(2‐tert‐butyl‐5‐methylphenol) linkages: Thermal and morphological properties

In this work, carboxylated multi‐walled carbon nanotubes (MWCNTs) were functionalized with riboflavin as a biological molecule under microwave irradiation. Solution blending method was used to incorporate different modified MWCNTs content (5, 10, and 15 wt %) into a chiral and biodegradable poly(ester‐imide) (PEI) to fabricate PEI‐based nanocomposites. The products were characterized for assessing the spectroscopic, thermal, and morphological properties by Fourier‐transform infrared spectroscopy, thermogravimetric analysis (TGA), X‐ray diffraction, transmission electron microscopy (TEM), and field‐emission scanning electron microscopy (FESEM). Optically active PEI was prepared by step‐growth polymerization of amino‐acid‐based diacid and aromatic diol. Functionalized MWCNTs were well dispersed in the PEI matrix and their distribution was homogeneous. This was confirmed by morphology study of the fractured surfaces of nanocomposites by FESEM and TEM. The addition of functionalized MWCNTs improved the thermal stability of NCs compared to the pure PEI. It was found from TGA data that temperature at 10% weight loss was increased from 409°C for pure PEI to 417, 420, and 424°C for nanocomposites containing 5, 10, and 15% functionalized MWCNTs, respectively. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 42908.     

Novel sulfonated multi-walled carbon nanotubes filled chitosan composite membrane for fuel-cell applications

In the present study, multi-walled carbon nanotubes (MWCNTs) were sulfonated by 1,3-propane sultone and distillation–precipitation polymerization, respectively, and then incorporated into chitosan (CS) to prepare CS/MWCNTs composite membranes for fuel cell applications. CS/MWCNTs membranes show better thermal and mechanical stability than pure CS membrane due to the strong electrostatic interaction between the  SO₃H groups of MWCNTs and the  NH₂ groups of CS, which can restrict the mobility of CS chain. The sulfonated MWCNTs provide efficient proton hopping sites ( SO₃H,  SO₃⁻ …. ₃⁺HN ), thereby resulting in the formation of continuous proton conducting channels. The composite membranes with 5 wt % of MWCNTs modified by two different ways show a proton conductivity of 0.026 and 0.025 S·cm⁻¹, respectively. In conclusion, CS/MWCNTs membrane is a promising proton exchange membrane for fuel-cell applications. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47603.     

Reactive blends of epoxy resin (DGEBA) crosslinked by anionically polymerized polycaprolactam: Process of epoxy cure and kinetics of decomposition

The curing reactions, kinetics, morphology, and thermal stability of the reactive blends of diglycidyl ether of bisphenol‐A (DGEBA) and polycaprolactam were studied by differential scanning calorimetry (DSC), Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and thermogravimetric analysis. DSC studies showed that the heat of reaction (ΔH) increased when the DGEBA content was increased from 50 to 80 wt % and increased drastically above 70 wt % DGEBA content because of an increase in the extent of crosslinking. The activation energy and pre‐exponential factor of cure reactions increased drastically with an increase in the DGEBA content above 70 wt % because of a drastic increase in crosslink density. The extent of curing reaction of polycaprolactam with DGEBA is dependent on the blend composition. The nucleophilic attack on oxirane ring by amide nitrogen of polycaprolactam is a dominant curing reaction in low DGEBA compositions, and another type of curing reaction with relatively large activation energy and pre‐exponential factor also occurred, which becomes dominant when the DGEBA content reaches above 70 wt %. FTIR studies also revealed that two types of reactions do exist during the curing of polycaprolactam with DGEBA. It was observed during SEM studies that the reactive blends show multiphase system and on increasing the DGEBA content from 50 to 80 wt %, the mixing of the two phases increased. The reactive blend Ep₈₀Ca₂₀ with 80 wt % DGEBA content exhibits a single‐phase system because of better mixing of the two phases. The results of thermogravimetric analysis also indicate that the initial degradation temperature (T_i), activation energy (E), and pre‐exponential factor (Z) increased with increasing DGEBA content from 50 to 80 wt % in the reactive blends and increased drastically above 70 wt % DGEBA content due to the higher crosslink density. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 687–697, 2004     

Fabrication and cell morphology of a microcellular poly(ether imide)–carbon nanotube composite foam with a three-dimensional shape

The preparation of microcellular poly(ether imide) (PEI) based foams with three-dimensional geometry remains a great challenge worldwide. In this study, we fabricated microcellular PEI–carbon nanotube (CNT) bead foams with a batch rapid depressurization method in a self-designed mold with supercritical carbon dioxide (scCO₂) as a blowing agent. The effects of the saturation time, foaming temperature, foaming pressure, and depressurization rate on the microcellular structures of the PEI foam were analyzed by the Taguchi approach to determine the optimum foaming conditions, and the influence of the CNT content on the cell structure was analyzed. The results show that the depressurization rate and foaming temperature were the key factors influencing the cell size and cell density (N _f); that is, the high depressurization rate and low foaming temperature favored a small cell size and high N _f. The foaming temperature also influenced the foaming ratio (ϕ), and a high ϕ was obtained at a high foaming temperature. Under optimal foaming conditions, PEI with 2.0 wt % CNTs presented the best cell structure; N _f, cell size, and ϕ were 6.14 × 10¹⁰ cell/cm³, 2.43 μm, and 2.08, respectively. The mechanical properties of the final parts were related more to the foaming time and CNT concentration, and the maximum tensile and compression strength were reached at 3 h foaming time and 2.0 wt % CNT, that is, at 2.75 and 15.1 MPa (10% strain), respectively. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47501.     

Immobilization of carbonic anhydrase on polyethylenimine/dopamine codeposited membranes

Carbonic anhydrase (CA) catalyzing CO₂ hydration has an important application in carbon capture, and its immobilization is very significant. Here, CA was covalently linked by glutaraldehyde (GA) to the surface of poly(vinylidene fluoride) (PVDF) and polyethylene (PE) membranes, which were previously modified via a simple codeposition of polyethyleneimine (PEI) and dopamine (DA). The effects of the modification conditions were investigated, and the membranes were characterized by Fourier transform infrared spectroscopy and scanning electron microscopy. The immobilization process was optimized, and the catalytic properties of immobilized CA were studied. The results show that the optimal mass ratio of PEI and DA was 1:1 and the deposition time was 10–12 h, at which the surface amino group density could reach 1.278 × 10⁻⁷ and 1.397 × 10⁻⁷ mol/cm² for PVDF and PE, respectively. For enzyme immobilization, the optimal CA and GA concentrations were 0.2 mg/mL and 0.1 wt %, and a maximum activity recovery of about 53% and 76% could be achieved for PVDF-attached CA and PE-attached CA, respectively. Their K_m values were 10.62 mM and 8.6 mM, and the corresponding K_cat/K_m values were 132.2 M⁻¹ s⁻¹ and 312.9 M⁻¹ s⁻¹. After immobilization, the storage stability and reusability of CA were much improved. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47784.     

Low percolation threshold in polycarbonate/multiwalled carbon nanotubes nanocomposites through melt blending with poly(butylene terephthalate)

Here, we demonstrate an easy method for the preparation of highly electrically conductive polycarbonate (PC)/multiwalled carbon nanotubes (MWCNTs) nanocomposites in the presence of poly(butylene terephthalate) (PBT). In the presence of MWCNTs, PC and PBT formed a miscible blend, and the MWCNTs in the PC matrix were uniformly and homogeneously dispersed after the melt mixing of the PC and PBT–MWCNT mixture. Finally, when the proportion of the PC and PBT–MWCNT mixture in the blend/MWCNT nanocomposites was changed, an electrical conductivity of 6.87 × 10^?7 S/cm was obtained in the PC/PBT–MWCNT nanocomposites at an MWCNT loading as low as about 0.35 wt %. Transmission electron microscopy revealed a regular and homogeneous dispersion and distribution of the MWCNTs and formed a continuous conductive network pathway of MWCNTs throughout the matrix phase. The storage modulus and thermal stability of the PC were also enhanced by the presence of a small amount of MWCNTs in the nanocomposites. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Polyethylenimine‐functionalized multiwalled carbon nanotube for the adsorption of hydrogen sulfide

Functionalized multiwalled carbon nanotubes (MWCNTs) were synthesized with ethane diamine and polyethylenimine (PEI) with molecular weights of 1800 [MWCNT‐PEI weight‐average molecular weight (M_w) = 1800] and 70,000 (MWCNT‐PEI M_w = 70,000), respectively. The structures and properties of the ethane diamine functionalized MWCNTs and PEI‐functionalized MWCNTs were characterized by Raman spectroscopy, thermogravimetric analysis, X‐ray powder diffraction, and scanning electron microscopy. An increase with the D/G (D, Disorder band; G, Graphite) ratio of the functionalized MWCNTs in the Raman spectra proved that the ethane diamine and PEI were successfully bonded to the surface of the pristine MWCNTs. The results of TGA also confirmed this. In addition, the structure of the functionalized MWCNTs showed no significant changes compared with the pristine MWCNTs; this was confirmed by X‐ray powder diffraction. Hydrogen sulfide (H₂S) sorption on the functionalized MWCNTs was studied by UV spectroscopy. As expected, the results of UV spectroscopy shows that the MWCNTs bonded with higher molecular weight PEI had a more excellent H₂S adsorption efficiency than those bonded with low‐molecular‐weight PEI and ethane diamine, a micromolecular amine. The effects of the pH and temperature on the adsorption of H₂S were also studied. Under the conditions investigated, the maximum first‐time H₂S adsorption efficiency of 1.94 mmol/g was observed for MWCNT‐PEI (M_w = 70,000) in the 60 mg/L sodium hydrosulfide (NaHS) aqueous solution. In addition, the H₂S reversible adsorption of the functionalized MWCNTs was conducted, and the second‐time H₂S adsorption efficiency of MWCNT‐PEI (M_w = 70,000) reached 1.83 mmol/g in the 60 mg/L NaHS aqueous solution. The results demonstrate that the MWCNTs decorated with high‐molecular‐weight PEI were potentially excellent and reversible H₂S adsorbents. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44742.     

The synthesis and characterization of a novel phosphorus–nitrogen containing flame retardant and its application in epoxy resins

A novel, halogen‐free, phosphorus–nitrogen containing flame retardant 2[4‐(2,4,6‐Tris{4‐[(5,5‐dimethyl‐2‐oxo‐2λ⁵‐[1,3,2]dioxaphosphinan‐2‐yl)hydroxymethyl]phenoxy}‐(1,3,5)‐triazine (TNTP) was successfully synthesized in a three‐step process, and characterized by FTIR, NMR spectroscopy, mass spectra, and elemental analysis. A series of modified DGEBA epoxy resin with different loadings of TNTP were prepared and cured by 4,4‐diaminodiphenylsulfone (DDS). Thermal gravimetric analysis and vertical burning test (UL‐94) were used to evaluate the flame retardancy of TNTP on DGEBA epoxy resin. The results showed that TNTP had a great impact on flame retardancy. All modified thermosets by using TNTP exhibited higher T_g than pure DGEBA/DDS. The loading of TNTP at only 5.0 wt % could result in satisfied flame retardancy (UL‐94, V‐0) together with high char residue (27.3%) at 700°C. The addition of TNTP could dramatically enhance the flame retardancy of DGEBA epoxy resins, which was further confirmed by the analysis of the char residues by scanning electron microscopy and FTIR. Furthermore, no obviously negative effect was found on the Izod impact strength and flexural property of DGEBA epoxy resins when TNTP loading limited in 5.0 wt %. DGEBA/DDS containing 2.5 wt % TNTP could enhance Izod impact strength from 10.47 to 10.94 kJ m^?2, and showed no appreciable effect on the flexural property (85.20 MPa) comparing with pure DGEBA/DDS (87.03 MPa). Results indicated that TNTP as a phosphorus–nitrogen synergistic intumescent flame retardant could be used for DGEBA epoxy resin. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 41079.     

Spray-drying of ceramics for plasma-spray coating

The spray-drying process of ceramics which are candidate materials for thermal barrier coatings (TBCs), i.e. 3YSZ+0, 2, 4, 6 wt.% Al₂O₃, is discussed in this paper. The two most important properties of spray-dried powders to determine the coating quality are density and particle size. Polyethyleneimine (PEI) acts as both an organic binder and a dispersant giving low viscosity in the suspension. The optimised suspension composition is: ⩾ 33.6 vol.% powder+1.8 wt.% PEI+ethanol, and operational parameters of the spray-dryer: drying temperature 175°C, feeding rate 55 cm³/min, feeding pressure 1.013×10⁴ Pa.     

Improving tribological properties of phenolic resin/carbon fiber composites using m-Si3N4@PANI core–shell particles

Phenolic resin/carbon fiber (PF/CF) composites have good tribological properties; however, their extensive applications are limited because of the poor thermal conductivity of the phenolic resins. In this work, core‑shell particles of polyaniline-coated (3-aminopropyl) triethoxysilane-modified β-Si₃N₄ (m-SiN@PANI) were used to enhance the tribological, electrical, and thermal conductivity properties of a PF/CF composite. A core‑shell particle, consisting of m-SiN@PANI, was characterized by Fourier Transform Infrared Spectrometry, X-Ray Diffraction, Scanning Electron Microscope, and Transmission Electron Microscope. The friction, thermal, and electrical properties of the composites were characterized by multifunctional vertical friction testing, wear measurement testing, thermogravimetric analysis, thermal constant analysis, and electrical conductivity testing. Remarkably, the test results showed that compared with the wear surface of the PF/CF composite, that of the phenolic resin/(2.0 wt % m-SiN@PANI)/carbon fiber composite exhibited a smoother morphology. The results indicated that the addition of m-SiN@PANI effectively improved the thermal conductivity, electrical conductivity, friction coefficient, and wear rate of the composites, which were 3.164 Wm⁻¹ K⁻¹, 5.33 × 10⁻⁶ S/m, 0.1681 and 1.13 × 10⁻⁸ mm³/Nm, respectively. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47785.     

Solid-state polyetherimide (PEI) nanofoams: the influence of the compatibility of nucleation agent on the cellular morphology

The introduction of polyhedral oligomeric silsesquioxane (POSS) particles which act as heterogeneous nucleation agent was applied to improve the cellular morphology of nanocellular polyetherimide (PEI) foams. The loading of POSS particles increases the solubility and diffusivity characteristics of gases in nanocomposite sheets by changing the distribution of the free volume and enlarging the unoccupied volume in polymer matrix. When the range of content of POSS particles is 0.2?~?1.0 wt. %, the range of the calculated surface tension of PEI/scCO₂ (γ _mix ) and radius of the critical nucleus (r*) are 30.98?~?28.14 mN/m, and 6.88?~?6.25 nm, respectively. However, the small aggregated POSS particles are favour of heterogeneous nucleation bacause the actual diameter of the aggregated POSS particles is approximate to twice r*, so the addtion of 0.5 wt. % POSS to PEI matrix presents excellent heterogeneous nucleation performance for foaming. The average cell size of 0.5 wt. % POSS/PEI nanofoams compared with neat PEI decreases from 108 to 66 nm and the cell density increses from 5.96?×?10¹⁴ to 3.34?×?10¹⁵ cells/cm³.     

Effects of meta and para diamines on the properties of polyetherimide nanocomposite films prepared by the sol‐gel process

The effects of chemical structure of diamines on the properties of polyetherimide (PEI) nanocomposite films prepared by the sol‐gel process were investigated. For meta diamine, nanocomposites with improved thermal, mechanical, and dielectric properties can be prepared by a sol‐gel process from soluble PEI via chemical imidization, with silica content up to 10%. However, for the PEI with pPDA as diamine and bisphenol A dianhydride, a two‐stage sol‐gel process via thermal imidization was necessary to prepare the nanocomposites. The thermal stability and mechanical properties were improved with the addition of up to 5 wt % of silica content. The variation could be attributed to the fact that differences in the compatibility between PEI and SiO₂ for two kinds of PEI with the different meta and para structure of the diamine monomer. The morphology of the fracture surfaces investigated by SEM showed a finely interconnected or cocontinuous phase for PEI nanocomposites with the silica content of up to 10% and 5 wt % for mPDA and pPDA as diamine, respectively. At higher silica contents, thermal and mechanical properties were reduced due to the aggregation of SiO₂. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

The role of a biobased epoxy monomer in the preparation of diglycidyl ether of bisphenol A/MWCNT composites

A biobased epoxy monomer (GA‐II) derived from gallic acid for multiwalls carbon nanotubes’ (MWCNTs) dispersion improvement is reported in this article. The aromatic group in its molecular structure made it to be absorbed onto the surface of MWCNTs via π‐π interactions and the GA‐II anchored MWCNT could be homogeneously dispersed in DGEBA matrix via sonication. That was proved by Raman and UV spectroscopy as well as scanning electron microscope. After curing reaction, the epoxy/MWCNT composites demonstrated enhanced mechanical properties, excellent thermal conductivity, and high electrical conductivity. With the addition of only 0.5 wt% GA‐II modified MWCNT, the tensile strength, tensile modulus, flexural strength, and flexural modulus of the composites were improved by 28%, 40%, 22%, and 16%, respectively. The thermal and electrical conductivities were also improved from 0.15 to 0.25 W/m K (67% increased) and from 0.7 × 10⁻¹⁴ to 0.24 × 10⁻⁴ S cm⁻¹ (10 orders increased). POLYM. COMPOS., 38:1640–1645, 2017. © 2015 Society of Plastics Engineers     

Effects of halloysite nanotubes on the morphology and CO2/CH4 separation performance of Pebax/polyetherimide thin-film composite membranes

Enhancing the performance of gas separation membranes is one of the major concerns of membrane researchers. Thus, in this study, poly(ether-block-amide) (Pebax)/polyetherimide (PEI) thin-film composite membranes were prepared and their CO₂/CH₄ gas separation performance was investigated by means of pure and mixed gases permeation tests. To improve the properties of these membranes, halloysite nanotubes (HNT) were added to Pebax layer at different loadings of 0.5, 1, 2, and 5 wt % to form Pebax-HNT/PEI membranes. Scanning electron microscopy, gas sorption, X-ray diffraction, Fourier-transform infrared, and differential scanning calorimetry tests were also performed to investigate the impact of HNT on structure and properties of prepared membranes. Results showed that both CO₂/CH₄ selectivity and CO₂ permeance increased by adding HNT to Pebax layer up to 2 wt %. By increasing HNT loading to 5 wt %, the CO₂/CH₄ selectivity decreased from 32 to 18, while CO₂ permeance increased from 3.25 to 4.2 GPU. Pebax/PEI and Pebax-HNT/PEI membranes containing 2 wt % of HNT were tested using CO₂/CH₄ gas mixtures at different feed CO₂ concentrations and feed pressure of 4 bar. The results showed that with increasing CO₂ concentration from 20 to 80 vol %, CO₂/CH₄ selectivity of Pebax/PEI composite membranes increased by 19%, while, in Pebax-HNT/PEI membrane, CO₂/CH₄ selectivity decreased by 40%. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48860.     

Improved thermal conductivity of epoxy resins using silane coupling agent-modified expanded graphite

A silane coupling agent was used to modify the surface of expanded graphite (EG), which was subsequently used as a thermally conductive filler to fabricate diglycidylether of bisphenol-A (DGEBA)/EG composites with high thermal conductivity via hot blending and compression-curing processes. The surface characteristics of silane coupling agent-modified EG (Si@EG) were characterized by a variety of analytical techniques. The effects of the Si@EG content on the thermal conductivity, thermal stability, impact strength, and morphology of the DGEBA/Si@EG composites were investigated. The results revealed that the addition of 80 wt.% Si@EG increased the thermal conductivity of the composites from 0.17 to 10.56 W/m K, which was 61.1 times higher than that of pristine DGEBA. The initial decomposition temperature of the composite containing 80 wt.% Si@EG was 60.6°C higher than that of pristine DGEBA. The impact strength of the composites decreased from 2.0 to 0.87 kJ/m² when the Si@EG content increased from 0 to 80 wt.%. The scanning electron microscopy images of the fractured surfaces revealed that the EG sheets in the DGEBA matrix formed a continuous thermally conductive path at high Si@EG contents.     

Isothermal crystallization kinetics of polypropylene in melt‐mixed composites of polypropylene and multi‐walled carbon nanotubes

The isothermal crystallization behaviour of the polypropylene (PP) phase in PP/multi‐walled carbon nanotubes (MWCNTs) composites has been investigated via differential scanning calorimetric analysis, which showed the influence of the varying dispersion level of MWCNTs in the respective PP matrix. PP/MWCNTs composites were prepared via melt‐blending technique, wherein two different grades of MWCNTs of varying average “agglomerate” size and varying entanglements (N‐MWCNTs and D‐MWCNTs) were utilized. Furthermore, the influence of melt‐viscosity of the PP phase was investigated on the crystallization kinetics of the PP/MWCNTs composites. Heterogeneous nucleation ability of MWCNTs has resulted in a decrease in half time of crystallization (t _1/2) from ～14 min for pure PP to ～6 min for PP/N‐MWCNTs and ～11 min for PP/D‐MWCNTs composites at 1 wt% of MWCNTs at 132 °C. Overall rate of crystallization (k) has significantly increased to 4.9 × 10^?2 min^?1 for PP/N‐MWCNTs composite as compared with 6.2 × 10^?3 min^?1 for PP/D‐MWCNTs composite at 0.5 wt% of MWCNTs at 132 °C. Moreover, the effect of a novel organic modifier, Li‐salt of 6‐amino hexanoic acid along with a compatibilizer (PP‐g‐MA) has also been investigated on the crystallization kinetics of the PP phase in PP/MWCNTs composites. POLYM. ENG. SCI., 57:1136–1146, 2017. © 2017 Society of Plastics Engineers     

Effects of amino‐functionalized carbon nanotubes on the properties of amine‐terminated butadiene–acrylonitrile rubber‐toughened epoxy resins

Amino‐functionalized multiwalled carbon nanotubes (MWCNT‐NH₂s) as nanofillers were incorporated into diglycidyl ether of bisphenol A (DGEBA) toughened with amine‐terminated butadiene–acrylonitrile (ATBN). The curing kinetics, glass‐transition temperature (T_g), thermal stability, mechanical properties, and morphology of DGEBA/ATBN/MWCNT‐NH₂ nanocomposites were investigated by differential scanning calorimetry (DSC), thermogravimetric analysis, a universal test machine, and scanning electron microscopy. DSC dynamic kinetic studies showed that the addition of MWCNT‐NH₂s accelerated the curing reaction of the ATBN‐toughened epoxy resin. DSC results revealed that the T_g of the rubber‐toughened epoxy nanocomposites decreased nearly 10°C with 2 wt % MWCNT‐NH₂s. The thermogravimetric results show that the addition of MWCNT‐NH₂s enhanced the thermal stability of the ATBN‐toughened epoxy resin. The tensile strength, flexural strength, and flexural modulus of the DGEBA/ATBN/MWCNT‐NH₂ nanocomposites increased increasing MWCNT‐NH₂ contents, whereas the addition of the MWCNT‐NH₂s slightly decreased the elongation at break of the rubber‐toughened epoxy. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40472.