Preparation and characterization of sulfonated block‐graft copolyimide/sulfonated polybenzimidazole blend membranes for fuel cell application

Polymer electrolyte blend membranes composed of sulfonated block‐graft polyimide (S‐bg‐PI) and sulfonated polybenzimidazole (sPBI) were prepared and characterized. The proton conductivity and oxygen permeability coefficient of the novel blend membrane S‐bg‐PI/sPBI (7 wt%) were 0.38 S cm^?1 at 90 °C and 98% relative humidity and 7.2 × 10^?13 cm³(STP) cm (cm² s cmHg)^?1 at 35 °C and 76 cmHg, respectively, while those of Nafion^® were 0.15 S cm^?1 and 1.1 × 10^?10 cm³(STP) cm (cm² s cmHg)^?1 under the same conditions. The apparent (proton/oxygen transport) selectivity calculated from the proton conductivity and the oxygen permeability coefficient in the S‐bg‐PI/sPBI (7 wt%) membrane was 300 times larger than that determined in the Nafion membrane. Besides, the excellent gas barrier properties based on an acid ? base interaction in the blend membranes are expected to suppress the generation of hydrogen peroxide and reactive oxygen species, which will degrade fuel cells during operation. The excellent proton conductivity and gas barrier properties of the novel membranes promise their application for future fuel cell membranes. © 2015 Society of Chemical Industry     

Sulfonated graphene oxide‐doped proton conductive membranes based on polymer blends of highly sulfonated poly(ether ether ketone) and sulfonated polybenzimidazole

Simultaneously improving the proton conductivity and mechanical properties of a polymer electrolyte membrane is a considerable challenge in commercializing proton exchange membrane fuel cells. In response, we prepared a new series of miscible polymer blends and thus the corresponding crosslinked membranes based on highly sulfonated poly(ether ether ketone) and sulfonated polybenzimidazole. The blended membranes showed more compact structures, due to the acid‐base interactions between the two constituents, and improved mechanical and morphological properties. Further efforts by doping sulfonated graphene oxide (s‐GO) forming composite membranes led to not only significantly elevated proton conductivity and electrochemical performance, but also better mechanical properties. Notably, the composite membrane with the filler content of 15 wt % exhibited a proton conductivity of 0.217 S cm^?1 at 80 °C, and its maximum power density tested by the H₂/air single PEMFC cell at room temperature reached 171 mW cm^?2, almost two and half folds compared with that of the native membrane. As a result, these polymeric membranes provided new options as proton exchange membranes for fuel‐cell applications. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46547.     

Highly selective custom-made chitosan based membranes with reduced fuel permeability for direct methanol fuel cells

Custom-made nanocomposite proton exchange membranes (PEMs) are fabricated using the blends of sulfonated chitosan (S-Chitosan) and sulfonated graphene oxide (SGO) nanosheets for direct methanol fuel cells (DMFCs). Sulfonation of chitosan and GO are carried out by 1,3-propane sultone and sulfanilic acid, respectively. Scanning electron microscope (SEM) with energy dispersive X-ray investigation revealed that the thick, folded and wrinkled sheet-like morphology of SGO and the existence of elemental sulfur. SEM and atomic force microscopy images showed the uniform dispersion of hydrophilic SGO nanosheets. Besides the S-Chitosan/SGO membranes showed higher water uptake, swelling ratio and ion exchange capacity due to the enhancement in hydrophilicity. The modified PEMs displayed improvement in proton conductivity since the ion-exchangeable sulfonic acid groups facilitate the proton conduction and effectively resist the methanol permeability by forming a strong hydrogen bond network with chitosan and thus diminish the void volume. Particularly, S-Chiotsan-1 membrane showed superior proton conductivity of 4.86 × 10⁻³ Scm⁻¹ at (25°C), selectivity of 1.89 × 10⁵ Scm⁻³ s and lesser methanol permeability of 2.57 × 10⁻⁸ cm²s⁻¹. Overall results suggest that the S-Chitosan/SGO membranes found to be a suitable alternate for Nafion® in DMFCs.     

Methanol permeability and proton conductivity of polybenzimidazole and sulfonated polybenzimidazole

The preparation of sulfonated polybenzimidazole (sPBI) by the grafting of (4‐bromomethyl) benzenesulfonate onto polybenzimidazole (PBI) has been investigated. The methanol permeability and proton conductivity of PBI and sPBI have been studied, and the effects of methanol concentration and temperature on the methanol permeability of PBI and sPBI membranes are discussed. The results showed that the PBI membrane is a good methanol barrier. Methanol permeability in this membrane decreases with increasing methanol concentration and increases with increasing temperature. The temperature‐dependence of methanol permeability of PBI and sPBI membranes is of the ‘Arrhenius type’. Methanol permeation of sPBI is less sensitive to temperature than that of PBI. However, sPBI is a poorer methanol barrier when compared to PBI. Methanol permeability in sPBI membranes increases with increasing methanol concentration and temperature. The proton conductivity of sPBI is 4.69 × 10^?4 S cm^?1 at room temperature in the hydrated state. The DC conductivity of sPBI–H₃PO₄ increases with increasing temperature. Proton transport in sPBI–H₃PO₄ is less sensitive to temperature than that in PBI–H₃PO₄. Copyright © 2004 Society of Chemical Industry     

Sulfonated polybenzimidazole/amine functionalized titanium dioxide (sPBI/AFT) composite electrolyte membranes for high temperature proton exchange membrane fuel cells usage

The novel sulfonated polybenzimidazole (sPBI)/amine functionalized titanium dioxide (AFT) composite membrane is devised and studied for its capability of the application of high temperature proton exchange membrane fuel cells (HT-PEMFCs), unlike the prior low temperature AFT endeavors. The high temperature compatibility was actualized because of the filling of free volumes in the rigid aromatic matrix of the composite with AFT nanoparticles which inhibited segmental motions of the chains and improved its thermal stability. Besides, amine functionalization of TiO₂ enhanced their dispersion character in the sPBI matrix and shortened the interparticle separation gap which finally improved the proton transfer after establishing interconnected pathways and breeding more phosphoric acid (PA) doping. In addition, the appeared assembled clusters of AFT flourished a superior mechanical stability. Thus, the optimized sPBI/AFT (10 wt%) showed 65.3 MPa tensile strength; 0.084 S·cm⁻¹ proton conductivity (at 160 °C; in anhydrous conditions), 28.6% water uptake and PA doping level of 23 mol per sPBI repeat unit. The maximum power density peak for sPBI/AFT-10 met the figure of 0.42 W·cm⁻² at 160 °C (in dry conditions) under atmospheric pressure with 1.5 and 2.5 stoichiometric flow rates of H₂/air. These results affirmed the probable fitting of sPBI/AFT composite for HT-PEMFC applications.     

A novel polybenzimidazole composite modified by sulfonated graphene oxide for high temperature proton exchange membrane fuel cells in anhydrous atmosphere

A novel functional graphene with high ion exchange capacity (IEC) was prepared by grafting reaction induced by ⁶⁰Co γ‐ray irradiation using graphene oxide. Then, polybenzimidazole/radiation grafting graphene oxide (PBI/RGO) composite membranes were prepared by the solution‐casting method and doped with phosphoric acid (PA) to improve their proton conductivity. The properties of PBI/GO/PA and PBI/RGO/PA membranes including the PA doping level, chemical stability, proton conductivity and mechanical properties were evaluated and compared. The tensile strength of PBI/RGO/PA membranes (ranging from 27.3 to 38.5 MPa) increases at first and then decreases with the increase of the RGO content, and is significantly higher than that of other PA doped PBI‐based membranes. The proton conductivity of PBI/RGO‐3/PA membrane is 28.0 mS cm^?1 at 170 °C without humidity, with an increase of 72.0% compared with that of PBI/PA membrane. These results suggest that PBI/RGO/PA membranes have the potential to be used as high‐temperature proton exchange membranes. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134 , 44986.     

Random sulfonated poly(arylene ether sulfone) and sulfonated poly(arylene ether ketone) membranes for fuel cell applications

In this study, sulfonated poly(arylene ether sulfone) (SPAES) and sulfonated poly(arylene ether ketone) (SPAEK) were randomly synthesized, employing a presulfonation process. This presulfonation process resulted in a more controlled and reproducible sulfonation level. The respective polymers were prepared using 2,2-Bis(4-hydroxyphenyl) propane at 50% molar ratio, which also provided some membrane elasticity. The resulting polymers, each had 25% of the block containing the sulfonic domains (SPAES A 25 and SPAEK A 25). Better conductive membranes were achieved for the random sulfone polymers than for the random ketone polymers, with values, respectively, of 0.24 and 0.07 S cm⁻¹ at 80°C. The lower proton conductivity from the ketone-based polymer was compensated with very low methanol permeability (0.25 × 10⁻⁶ cm² s⁻¹) and outstanding oxidative stability. The selectivity of both polymer membranes exceeded the reported values for the state-of-the-art Nafion® 117 and other commercially available options. Both polymer membranes, with their unique combination of ionic domains, elastomeric blocks, and resulting morphology, could be viable candidates for fuel cell applications.     

Proton exchange composite membranes from blends of brominated and sulfonated poly(2,6‐dimethyl‐1,4‐phenylene oxide)

New composite proton exchange membrane was prepared by mixing a 1‐methyl‐2‐pyrrolidone (NMP) solution of sulfonated poly(2,6‐dimethyl‐1,4‐phenylene oxide) (SPPO) in sodium form and brominated poly(2,6‐dimethyl‐1,4‐phenylene oxide) (BPPO) for hydrophilic‐hydrophobic balance, then casting the solution as a thin film, evaporating the solvent, and treating the membrane with aqueous hydrochloric acid. The resulting membranes were subsequently characterized using FTIR‐ATR, SEM‐EDXA, and TGA instrumentation as well as measurements of basic properties such as ion exchange capacity (IEC), water uptake, proton conductivity, methanol permeability, and single cell performance. Water uptake, IEC, proton conductivity, and methanol permeability all increased with a corresponding increase of SPPO content. By properly compromising the conductivity and methanol permeability, membranes with 60–80 wt % SPPO content exhibited comparable proton conductivity to that of Nafion^® 117, with only half the methanol permeability, thereby demonstrating higher single cell performance. The membranes developed in this study could thus be a suitable candidate electrolyte for proton exchange membrane fuel cells (PEMFCs). © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

New composite membrane poly(vinyl alcohol)/graphene oxide for direct ethanol–proton exchange membrane fuel cell

This study investigated a simple synthesis of a crosslinked poly(vinyl alcohol)/ graphene oxide composite membrane with lower ethanol permeability membrane for passive direct ethanol–proton exchange membrane fuel cells (DE-PEMFCs). The chemical and physical structure, morphologies, ethanol uptake and permeability, ion exchange capacities, water uptake, and proton conductivities were determined and found that transport properties of the membrane were affected by the GO loading. The composite membrane with optimum GO content (15 wt %) exhibited the highest proton conductivity of 9.5 × 10⁻³ Scm⁻¹ at 30°C, 3.24 × 10⁻² Scm⁻¹ at 60°C, respectively and reduced ethanol permeability until 1.75 × 10⁻⁷ cm² s⁻¹. In the passive DE-PEMFC, the power density at 60°C were obtained as 5.84 mW cm⁻² higher than those by commercial Nafion 117 is 4.52 mW cm⁻². © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 46928.     

EB‐crosslinked Polymer Electrolyte Membranes Based on Highly Sulfonated Poly(ether ether ketone) and Poly(vinylidene fluoride)/Triallyl Isocyanurate

In this study, crosslinked polymer electrolyte membranes for polymer electrolyte membrane fuel cell (PEMFC) applications are prepared using electron beam irradiation with a mixture of sulfonated poly(ether ether ketone) (SPEEK), poly(vinylidene fluoride) (PVDF), and triallyl isocyanurate (TAIC) at a dose of 300 kGy. The gel‐fraction of the irradiated SPEEK/PVDF/TAIC (95/4.5/0.5) membrane is 87% while the unirradiated membrane completely dissolves in DMAc solvent. In addition, the water uptake of the irradiated membrane is 221% at 70 °C while that of the unirradiated membrane completely dissolves in water at above 70 °C. The ion exchange capacity and proton conductivity of the crosslinked membrane are 1.57 meq g⁻¹, and 4.0 × 10⁻² S cm⁻¹ (at 80 °C and RH 90%), respectively. Furthermore, a morphology study of the membranes is conducted using differential scanning calorimetry and X‐ray diffractometry. The cell performance study with the crosslinked membrane demonstrates that the maximum power density is 518 mW cm⁻² at 1036 mA cm⁻² and the maximum current density at applied voltage of 0.4 V is 1190 mA cm⁻².     

Novel sulfonated multi-walled carbon nanotubes filled chitosan composite membrane for fuel-cell applications

In the present study, multi-walled carbon nanotubes (MWCNTs) were sulfonated by 1,3-propane sultone and distillation–precipitation polymerization, respectively, and then incorporated into chitosan (CS) to prepare CS/MWCNTs composite membranes for fuel cell applications. CS/MWCNTs membranes show better thermal and mechanical stability than pure CS membrane due to the strong electrostatic interaction between the  SO₃H groups of MWCNTs and the  NH₂ groups of CS, which can restrict the mobility of CS chain. The sulfonated MWCNTs provide efficient proton hopping sites ( SO₃H,  SO₃⁻ …. ₃⁺HN ), thereby resulting in the formation of continuous proton conducting channels. The composite membranes with 5 wt % of MWCNTs modified by two different ways show a proton conductivity of 0.026 and 0.025 S·cm⁻¹, respectively. In conclusion, CS/MWCNTs membrane is a promising proton exchange membrane for fuel-cell applications. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47603.     

Influence of Sulfonated Graphene Oxide on Sulfonated Polysulfone Membrane for Direct Methanol Fuel Cell

Novel proton exchange membranes consisting of an inorganic filler, namely sulfonated graphene oxide, embedded in sulfonated polysulfone were fabricated. The membrane performance depended on the sulfonated graphene oxide content possessed the functional groups to provide the interfacial interaction with sulfonated polysulfone through ionic channels and blocking effect. The membrane with 3% v/v sulfonated graphene oxide content embedded in the matrix was shown to be suitable for direct methanol fuel cell applications. The membrane exhibited the highest proton conductivity of 4.27?×?10^?3 S cm^?1 which was higher than that of Nafion117. Moreover, the membrane provided the lowest methanol permeability of 3.48?×?10^?7?cm²/s which was lower than that of Nafion117.     

New organic–inorganic hybrid membranes based on sulfonated polyimide/aminopropyltriethoxysilane doping with sulfonated mesoporous silica for direct methanol fuel cells

A series of novel composite methanol‐blocking polymer electrolyte membranes based on sulfonated polyimide (SPI) and aminopropyltriethoxysilane (APTES) doping with sulfonated mesoporous silica (S‐mSiO₂) were prepared by the casting procedure. The microstructure and properties of the resulting hybrid membranes were extensively characterized. The crosslinking networks of amino silica phase together with sulfonated mesoporous silica improved the thermal stability of the hybrid membranes to a certain extent in the second decomposition temperature (250–400°C). The composite membranes doping with sulfonated mesoporous silica (SPI/APTES/S‐mSiO₂) displayed superior comprehensive performance to the SPI and SPI/APTES membranes, in which the homogeneously embedded S‐mSiO₂ provided new pathways for proton conduction, rendered more tortuous pathways as well as greater resistance for methanol crossover. The hybrid membrane with 3 wt % S‐mSiO₂ into SPI/APTES‐4 (SPI/A‐4) exhibited the methanol permeability of 4.68 × 10^?6 cm² s^?1at 25°C and proton conductivity of 0.184 S cm^?1 at 80°C and 100%RH, while SPI/A‐4 membrane had the methanol permeability of 5.16 × 10^?6 cm² s^?1 at 25°C and proton conductivity of 0.172 S cm^?1 at 80°C and 100%RH and Nafion 117 exhibited the values of 8.80 × 10^?6 cm² s^?1 and 0.176 S cm^?1 in the same test conditions, respectively. The hybrid membranes were stable up to about 80°C and demonstrated a higher ratio of proton conductivity to methanol permeability than that of Nafion117. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Preparation of sulfonated polysulfone/sulfonated titanium dioxide hybrid membranes for DMFC applications

Sulfonated titanium dioxide (STiO₂) was prepared by the reaction of TiO₂ with 1,3-propanesultone. Novel STiO₂ incorporated sulfonated poly(aryl ether sulfone) (SPAES) nanocomposite proton exchange membranes (PEMs) were made by solution casting. Fourier transform infrared, X-ray photoelectron spectroscopy, and proton nuclear magnetic resonance indicated the successful preparation of STiO₂ and SPAES. The thermogravimetric analysis and oxidative stability testing results implied that SPAES/STiO₂ membranes had better stability than pristine SPAES membrane. Meanwhile, the scanning electron microscopy spectra exhibited that the introduction of sulfonated groups on the surface of TiO₂ significantly improved its dispersibility in SPAES matrix. More specifically, SPAES membrane incorporated with 2%STiO₂ exhibited higher proton conductivity (60 mS cm⁻¹), lower methanol permeability (2.1 × 10⁻⁷ cm² s⁻¹) and better proton selectivity (28.0 × 10⁴ S s cm⁻³) than that of pure SPAES and SPAES/1%TiO₂ membrane. The SPAES-1%STiO₂ membrane showed better performance in direct methanol fuel cell (DMFC) test than SPAES and Nafion 117 due to the reduction of methanol crossover. From these results, it is evident that SPAES/STiO₂ nanocomposite PEMs have great potential for applications in DMFCs. © 2020 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48938.     

Behavior of sulfonated poly(ether ether ketone) in ethanol–water systems

The behavior of sulfonated poly(ether ether ketone) (sPEEK) membranes in ethanol–water systems was studied for possible application in direct ethanol fuel cells (DEFCs). Polymer membranes with different degrees of sulfonation were tested by means of uptake, swelling, and ethanol transport with dynamic measurements (liquid–liquid and liquid–gas systems). Ethanol permeability was determined in an liquid–liquid diffusion cell. For membranes with an ion‐exchange capacity (IEC) between 1.15 and 1.75 mmol/g, the ethanol permeability varied between 5 × 10^?8 and 1 × 10^?6 cm²/s, being dependent on the measuring temperature. Ethanol and water transport in liquid–gas systems was tested with pervaporation as a function of IEC and temperature. Higher IEC accounted for higher fluxes and lower water/ethanol selectivity. The temperature had a large effect on the fluxes, but the selectivity remained constant. Furthermore, the membranes were characterized with proton conductivity measurements. The proton diffusion coefficient was calculated, and a transition in the proton transfer mechanism was found at a water number of 12. Membranes with high IEC (>1.6 mmol/g) exhibited larger proton diffusion coefficients in ethanol–water systems than in water systems. The membrane with the lowest IEC exhibited the best proton transport to ethanol permeability selectivity. The use of sPEEK membranes in DEFC systems depends on possible modifications to stabilize the membranes in the higher conductive region rather than on modifications to increase the proton conductivity in the stable region. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Synthesis and Characterization of Sulfonated Cardo Poly(Arylene Ether Sulfone)s for Fuel Cell Proton Exchange Membrane Application

Sulfonated cardo poly(arylene ether sulfone)s ( SPPA ‐ PES ) with various degrees of sulfonation (DS) were prepared by post‐sulfonation of synthesized phenolphthalein anilide ( PPA ; N‐phenyl‐3,3′‐bis(4‐hydroxyphenyl)‐1‐isobenzopyrolidone) poly(arylene ether sulfone)s ( PPA ‐ PES ) by using concentrated sulfuric acid. PPA ‐ PES copolymers were synthesized by direct polycondensation of PPA with bis‐(4‐fluorophenyl)‐sulfone and 4,4′‐sulfonyldiphenol. The DS was varied with different mole ratios of PPA (24, 30, 40, 50 mol.%) in the polymer. The structure of the resulting SPPA ‐ PES copolymers and the different contents of the sulfonated unit were studied by Fourier transform infrared (FT‐IR) spectroscopy, ¹H NMR spectroscopy, and thermogravimetric analysis (TGA). Sorption experiments were conducted to observe the interaction of sulfonated polymer with water. The ion exchange capacity (IEC) and proton conductivity of SPPA ‐ PES were evaluated according to the increase of DS. The water uptake (WU) of the resulting SPPA ‐ PES membranes was in the range of 20–72%, compared with 28% for Nafion 211®. The SPPA ‐ PES membranes showed proton conductivities of 23–82 mS cm^–1, compared with 194 mS cm^–1 for Nafion 211®, under 100% relative humidity (RH) at 80 °C.     

Poly(arylene ether)s carrying pendant (3‐sulfonated) phenylsulfonyl groups

A series of poly(arylene ether)s with biphenyl units and pendant sulfonated phenylsulfonyl groups was prepared via nucleophilic aromatic substitution reactions of varying ratios of 3,5‐difluoro‐3′‐sulfonated diphenylsulfone and 4,4′‐difluorodiphenylsulfone with 4,4′‐biphenol. As such, the sulfonic acid moieties reside in the meta position of a pendant, electron‐poor phenylsulfonyl group. Mechanically robust proton‐exchange membranes with ion‐exchange capacities (IEC) ranging from 0.91 to 2.05 meq g^?1 were cast from dimethylacetamide. The thermal stability of the membranes was evaluated via thermogravimetric analysis and the 5% weight losses were found to be in excess of 330 °C in air. The glass transition temperatures were determined, via differential scanning calorimetry, to range from a low of 148 to a high of 209 °C at IEC values of 0.91 and 1.79 meq g^?1, respectively. The copolymer membranes reached proton conductivities as high as 142 mS cm^?1 under 100% relative humidity, with relatively low water uptake values (8–32 wt%). Copyright © 2012 Society of Chemical Industry     

Phthalonitrile end-capped sulfonated polyarylene ether nitriles for low-swelling proton exchange membranes

A series of phthalonitrile end-capped sulfonated polyarylene ether nitriles are synthesized via K₂CO₃ mediated nucleophilic aromatic substitution reaction at various molar ratios. The as-prepared polymer structures are confirmed by ¹H NMR and FTIR spectroscopy. The properties of membranes cast from the corresponding polymers are investigated with respect to their structures. The membranes exhibit good thermal and mechanical properties, low methanol permeability (0.01?×?10^?6–0.58?×?10^?6 cm²·s^?1 at 20 °C), and high proton conductivity (0.021–0.088 S·cm^?1 at 20 °C). The introduction of phthalonitrile is proved to increase intermolecular interaction, mainly contributing to the reduction in water uptake, swelling ratio, and methanol permeability. More importantly, its introduction does not decrease the proton conductivity, but there is a slight increase. Furthermore, the selectivity of SPEN-CN-50 can reach 4.11?×?10⁵ S·s·cm^?3, which is about nine times higher than that of Nafion 117. All the data show that the as-prepared membranes may be potential proton exchange membrane for DMFCs applications.     

Synthesis and characterization of new sulfonated copolytriazoles and their proton exchange membrane properties

This work reports the synthesis and characterization of a series of new sulfonated copolytriazoles. The polymers were prepared by CuI catalyzed 1,3-cycloaddition reaction of an equimolar amount of a dialkyne monomer, 1,3-diethynylbenzene and a mixture of two diazide monomers, namely, 4,4′-diazidodiphenyl ether and 4,4′-diazido-2,2′-stilbenedisulfonic acid disodium salt. The copolymers showed high inherent viscosity indicating the formation of high molar mass product. The copolymers were characterized by Fourier transform infrared and proton nuclear magnetic resonance spectroscopic techniques. The copolymer membranes displayed moderate water uptake, high dimensional, mechanical, and thermal stability. Transmission electron microscopy micrographs displayed excellent phase-separated morphology along with very fine ionic clusters. The copolymer PTEOSH-90 (90% degree of sulfonation) showed much higher proton conductivity value which is up to 196 mS cm⁻¹ at 80 °C in completely hydrated condition compared to that of Nafion (165 mS cm⁻¹). © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48514.     

Sulfonated poly(ether ether ketone)/s–TiO2 composite membrane for a vanadium redox flow battery

The SPEEK/s-TiO₂ composite membrane was prepared by blending sulfonated poly(ether ether ketone) (SPEEK) and sulfonated titanium dioxide (s-TiO₂) nanoparticles. The important physiochemical parameters such as proton conductivity, water uptake, swelling degree and ion exchange capacity of the composite membrane were measured. The thermal stability and chemical stability were also tested. It was observed that the SPEEK/s-TiO₂ composite membrane exhibited the best selectivity (7.13 × 10⁴ S·min·cm⁻³) accompanying high proton conductivity (0.061 S·cm⁻¹) and low tetravalent vanadium ion (VO²⁺) permeability (8.55 × 10⁻⁷ cm²·min⁻¹) compared with Nafion117, SPEEK and SPEEK/TiO₂ membranes. The battery performance with these membranes was characterized by charge–discharge cycling tests and it was found that the SPEEK/s-TiO₂ composite membrane showed the highest energy efficiency (EE) up to 82.3%, indicating the SPEEK/s-TiO₂ composite membrane is a candidate for vanadium redox flow battery (VRFB) application. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48830.