Understanding the oxygen barrier property of highly transparent poly(lactic acid)/benzoxazine composite film by analyzing the UV-shielding performance

This work reports a new composite film from poly(lactic acid) (PLA) and benzoxazine (BOZ). Introduction of BOZ to PLA simultaneously improves the ultraviolet (UV)-shielding and oxygen barrier properties, which show strong dependence on the content of BOZ. The PLA film demonstrates almost no UV-shielding capacity, but the PLA/BOZ composite film can reach UV-shielding capacity of 98.3% at 350 nm. The corresponding average oxygen permeability coefficient of the composite film is as low as 1.168 × 10⁻¹⁸ m³ m m⁻² s⁻¹ Pa⁻¹, which is significantly lower than that of PLA (5.540 × 10⁻¹⁷ m³ m m⁻² s⁻¹ Pa⁻¹). Meanwhile, the composite film retains visible transparency ≥90.0% at 550 nm. The relationship and its implication between the oxygen barrier performance and UV-shielding capacity are discussed, which propose new guidelines for the development of high barrier PLA film. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47510.     

Influence of different reactor types on Nannochloropsis oculata microalgae culture for lipids and fatty acid production

Greenhouse gases emitted into the atmosphere by burning of fossil fuels cause global warming. One option is obtaining biodiesel. Nannochloropsis oculata was cultured under different light intensities and reactors at 25°C for 21 days with f/2 medium to assess their effects on cell density, lipid, and fatty acids (FAs). N. oculata improved cell density on fed-batch glass tubular reactor (7 L) at 200 μmol E m⁻² s⁻¹, yielding 3.5 × 10⁸ cells ml⁻¹, followed by fed-batch Erlenmeyer flask (1 L) at 650 μmol E m⁻² s⁻¹ with 1.7 × 10⁸ cells ml⁻¹. The highest total lipid contents (% g lipid × g dry biomass⁻¹) were 44.4 ± 0.8% for the reactor (1 L) at 650 μmol E m⁻² s⁻¹ and 35.2 ± 0.2% for the tubular reactor (7 L) at 200 μmol E m⁻² s⁻¹, until twice as high compared with the control culture (Erlenmeyer flask 1 L, 80 μmol E m⁻² s⁻¹) with 21.2 ± 1%. Comparing the total lipid content at 200 μmol E m⁻² s⁻¹, tubular reactor (7 L) and reactor 1 L achieved 35.2 ± 0.2% and 28.3 ± 1%, respectively, indicating the effect of shape reactor. The FAs were affected by high light intensity, decreasing SFAs to 2.5%, and increased monounsaturated fatty acids + polyunsaturated fatty acids to 2.5%. PUFAs (20:5n-3) and (20:4n-3) were affected by reactor shape, decreasing by half in the tubular reactor. In the best culture, fed-batch tubular reactor (7 L) at 200 μmol E m⁻² s⁻¹ contains major FAs (16:0; 38.06 ± 0.16%), (16:1n-7; 30.74 ± 0.58%), and (18:1n-9; 17.15 ± 0.91%).     

Antioxidant and physicochemical properties of blended films based on gelatin‐sodium caseinate activated with natural extracts

Blend films of pigskin gelatin (GEL) and sodium caseinate (SCas) with boldo (B), guarana (G), cinnamon (C), or rosemary (R) extracts added were studied. SCas and extracts addition in blend films significantly increased the gloss and better UV barrier of GEL100 films. Extracts incorporation significantly decreased the rigidity and elongation of GEL100 films, which were significantly improved in GEL75:SCas25 blend films with extracts (EM = 295.69 ± 21.75 MPa and EB = 11.60 ± 3.43%). SCas addition not affected the TS parameter. The water vapor permeability of GEL100 films was reduced in blended films with extracts, showing the lowest value for GEL75:SCas25 + R (0.99 ± 0.07 × 10¹⁰ g s^?1 m^?1 Pa^?1). FTIR and microstructure analyses showed good compatibility for all components. The antioxidant activity of GEL100 was significantly increased with SCas and extracts addition (GEL50:SCas50 + R = 4.31 ± 0.11 mM ), suggesting the application of these films as an active food packaging material. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134 , 44467.     

Direct current electrical characterization of plasma polymerized pyrrole-N,N,3,5 tetramethylaniline bilayer thin films

The direct current conduction mechanism in plasma polymerized pyrrole-N,N,3,5 tetramethylaniline (PPPy-PPTMA) bilayer thin films has been discussed in this article. A parallel plate capacitively coupled glow discharge reactor was used to deposit PPPy, PPTMA, and PPPy-PPTMA thin films at room temperature onto glass substrates. The Fourier Transform Infrared analyses showed that the PPPy-PPTMA bilayer thin films contained the structural characteristics of both the PPPy and PPTMA. The current density-voltage characteristics of PPPy-PPTMA bilayer thin films of different deposition time-ratios indicated an increase in electrical conductivity as the proportion of PPTMA was increased in the bilayer films. It is also observed that the conductivity of the bilayer thin film is reduced compared with its component thin films. It is seen that in the low voltage region the current conduction obeys Ohm's law, while the charge transport phenomenon appears to be the space charge limited conduction in the higher voltage region. The mobility of the charges, the free charge carrier density, and the permittivity of the PPPy, PPTMA and PPPy-PPTMA bilayer thin films have been calculated. The permittivity for PPPy, PPTMA and PPPy-PPTMA bilayer thin films were found to be 1.07 × 10⁻¹⁰, 2.2 × 10⁻¹¹, and 1.26 × 10⁻¹⁰ C² N⁻¹ m⁻², respectively; the free charge carrier density were (3.56 ± 0.01) × 10²², 2 × 10²¹ and (5.19 ± 0.02) × 10²² m⁻³ respectively; and the mobility of the charges were found to be (4.4 ± 0.01) × 10⁻¹⁹, 1.3 × 10⁻¹³ and (2.1 ± 0.01) × 10⁻¹⁹ m² V⁻¹ s⁻¹ respectively. PACS: 72.80.Le, 73.21.Ac, 73.40.Rw, 73.50.Gr, 73.61.Ph. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Bitter potato starch-based film enriched with copaiba leaf extract obtained using supercritical carbon dioxide: Physical–mechanical,antioxidant, and disintegrability properties

Films based on bitter potato starch (BPS) and its blends with chitosan (BPS-Ch) or soy protein isolate (BPS-SPI) loaded with copaiba leaf extract (E) are prepared via the casting method. The physical–mechanical and antioxidant properties of the as-prepared films are compared with those of a control. Moreover, the half-maximal degradation (t₅₀) of the prepared films is calculated by fitting the Hill model to disintegrability kinetic data. Among the analyzed films, BPS-Ch-E exhibits the lowest (p < 0.05) solubility in water and opacity, strongest water vapor-barrier (3.58 × 10⁻¹¹ g m⁻¹ s⁻¹ Pa⁻¹), and highest tensile strength and elongation at break. The Fourier transform infrared spectra of BPS-Ch-E and BPS-SPI-E demonstrate new peaks at 1550, 1239, and 1070 cm⁻¹ corresponding to N H and C O stretching. The BPS-E and BPS-Ch-E surfaces are devoid of scratches and phase separation. The incorporation of E significantly increases the antioxidant activity of the films. BPS-SPI-E and BPS-Ch-E demonstrate the lowest (t₅₀ ≈ 1.4 days) and highest (t₅₀ ≈ 3.5 days) disintegration rates, respectively, among the prepared films. E loading facilitates the development of films possessing beneficial physical–mechanical and antioxidant properties as well as rapid disintegrability, enabling their potential application as a eco-friendly packaging material.     

Cytarabine trapping in poly(2-hydroxyethyl methacrylate-co-acrylamide) hydrogels: drug delivery studies

Copolymeric hydrogels of poly(2-hydroxyethyl methacrylate-co-acrylamide) [p(HEMA-co-A)] crosslinked with ethylene glycol dimethacrylate, with a high equilibrium degree of swelling (37–65 wt%) in saline solution (NaCl 0.9 wt%) were synthesized as devices for controlled release of cytarabine (ara-C). Two compositions of the copolymer, each with a different degree of crosslinking have been studied, HEMA80/A20 and HEMA60/A40. The antineoplasic drug was included in the feed mixture of polymerization, and discs 3.7 ± 0.4 mm thick and 11.8 ± 0.2 mm in diameter with 5–40 mg (1.0–8.3 wt%) of ara-C were obtained. The diffusion studies followed Fick's second law. The diffusion coefficients for swelling of the gels were between 3.60 × 10⁻¹¹ and 15.8 × 10⁻¹¹ m² s⁻¹; those for release of ara-C were between 0.31 × 10⁻¹¹ and 7.18 × 10⁻¹¹ m² s⁻¹. The activation energies for swelling were in the range 23.4–31.9 kJ mol⁻¹ and those for ara-C release were 42.2–61.6 kJ mol⁻¹; their values indicate that the drug release process depends on drug–matrix and drug–water interactions that are influenced by the aqueous solution content and the network size of the gels. Total release of the drug takes place between 17 h from H60/A40/E2 at 310 K and 6 days from H80/A20/E10 at 288 K. Ara-C degradation was not observed either during loading of the gels or during drug release. © 1999 Society of Chemical Industry     

High gas permeability and directional channels of mullite porous ceramics prepared by pectin-based freeze-drying method

New gel system for preparing mullite porous ceramics by gel-casting freeze-drying was proposed, using pectin as gel source and alumina and silica as raw materials. Directional channels were formed due to sublimation of water during freeze-drying and decomposition of pectin during high temperature sintering to prepare porous mullite ceramic membranes. Effects of solid content on the properties of mullite ceramics in terms of phase composition, microstructure, apparent porosity, bulk density, pore size distribution, compressive strength, thermal conductivity, pressure drop, and gas permeability were investigated. It was found that prepared porous mullite possessed high apparent porosity (56.04%–75.34%), low bulk density (.77–1.37 g/cm³), uniform pore size distribution, relatively high compressive strength (.61–3.03 MPa), low thermal conductivity (.224–.329 W/(m·K)), high gas permeability coefficient (1.11 × 10⁻¹⁰–4.73 × 10⁻¹¹ m²), and gas permeance (2.18 × 10⁻²–9.32 × 10⁻³ mol⋅m⁻²⋅s⁻¹⋅Pa⁻¹). These properties make prepared lightweight mullite ceramic membranes promising for application in high temperature flue gas filtration. Proposed gel system is expected to provide a new route to prepare porous ceramics with high porosity and directional channels.     

Investigation of sorption and diffusion of supercritical carbon dioxide into poly(vinyl chloride)

The interaction of supercritical carbon dioxide (scCO₂) with poly(vinyl chloride) (PVC) was systematically investigated. PVC films of 0.5 mm thickness were treated with CO₂ at pressures between 5 and 40 MPa, at temperatures between 40 and 70°C and soaking times between 0.5 and 7 h. The gravimetric desorption data were kinetically and thermodynamically evaluated assuming Fickian diffusion and the morphology changes due to the CO₂ treatment investigated by microscopic methods. The sorbed amount of CO₂, q (q=g_CO2/g_polymer) ranged between 0.03 (5 MPa, 70°C) and 0.13 (15 MPa, 40°C). The desorption diffusivities, D_d, were in the order of 0.1×10⁻¹¹ m²/s and decreased with decreasing amounts of CO₂. In contrast, the sorption diffusivities, D_s, were markedly higher and varied between 0.7×10⁻¹¹ and 2.5×10⁻¹¹ m²/s (20 MPa, 40–70°C). The CO₂ treatment changed the polymer chain structure, macroscopically visualized by the film opaqueness and by the density decrease to 1.05 g/cm³. Microcellular structures were not detected.     

钯复合膜的制备及其在氢气氮气分离中的应用

Thin palladium composite membranes were prepared by modified electroless plating method on a-alumina supports and a dense Pd/α-Al2O3 composite membrane with high hydrogen flux, good selectivity for hydrogen was obtained. It was tested in a single gas permeation system for hydrogen permeance and hydrogen selectivity over mtrogen. The hydrogen permeance of the corresponding membrane was ashigh as 2.45×10^-6mol·m^-2·s^-1.Pa^-1 and H2/N2 selectivityover700 at 623K and a pressure difference of 0.1MPa. The-main resistance of the composite membrane to H2 permeation lies in the aluminum ceramic support rather than the thin Pd layer.     

Complexes of Hydrogen Peroxide with Dioxoactinide(VI) Species in Aqueous Carbonate and Bicarbonate Media. Formation of An(VI)–H2O2 Complexes

The spectra for 1:1 complexes formed between triscarbonatouranium(VI) + H₂O₂ and triscarbanatoneptunium(VI) + H₂O₂ are presented. The respective rates of formation (25°C, 0.05 M NA₂CO₃) are 565 ± 41 M⁻¹ s⁻¹ and (2.19 ± .01) X 10³ M⁻¹ s⁻¹. The corresponding activation parameters are ΔH* = 67.8 ± 3.2 kJ/m, 43.6 ± 2.0 kJ/m, ΔS* = 30 ± 11 J/m °K and −36 ± 7 J/m °K, respectively. The U(VI) complex appears to be stable over a period of months while the Np(VI) complex is formed as a transient species that disappears via a complex process.     

Fluorescence Quenching in Three to Zero Dimensions: Effect of Dimensionality on a Diffusion-Limited Reaction

The diffusion-limited fluorescence quenching of pyrene by a hydrophobic benzophenone derivative, 1-(4-benzoyl)-phenylhexane, was investigated in the different phases of the binary system hexaethyleneglycol-mono-n-dodecylether (C₁₂E₆)-water, from the normal homogeneous solution of the neat surfactant, via a sequence of liquid crystalline phases, to the aqueous micellar solution. These phases provide nonpolar domains of various dimensionality for the reactants: three dimensions in the neat surfactant, two in the lamellar phase, one in the hexagonal phase, and zero in the small micelles. The results were evaluated using models with appropriate dimension for the diffusion-controlled reaction. The resulting diffusion coefficients at 20°C were obtained as 3 × 10⁻¹¹ m² s⁻¹ in the neat surfactant, around 6 × 10⁻¹¹ m² s⁻¹ in the lamellar phase, and 10 × 10⁻¹¹ m² s⁻¹ in the hexagonal phase. The activation energy for the diffusion process increased from 32 kJ mol⁻¹ in the neat surfactant to 42 kJ mol⁻¹ in the hexagonal phase. The differences between the phases may be due to the uncertainty in the values of the size parameters for the structures; in any case, they are not large, indicating that it is mainly the geometry that is important for the deactivation kinetics, whereas the mobilities of the reactants are less affected by changes in packing.     

Synthesis and characterization of ternary layered i-MAX (Mo2/3Y1/3)2AlC ceramics fabricated by spark plasma sintering

In this paper, the i-MAX phase (Mo_2/3Y_1/3)₂AlC ceramic with high purity of 98.29 wt% (1.13 wt% Y₂O₃ and 0.58 wt% Mo₂C) and high relative density of 98.59% was successfully synthesized by spark plasma sintering (SPS) at 1500°C with the molar ratio of n(Mo):n(Y):n(Al):n(C) = 4:2:3.3:2.7. The positions of C atoms in the crystal of (Mo_2/3Y_1/3)₂AlC were determined. Microstructure and physical and mechanical properties of (Mo_2/3Y_1/3)₂AlC ceramic were systematically investigated. It was found that the obtained (Mo_2/3Y_1/3)₂AlC ceramic had an average grain size of 32.1 ± 3.1 μm in length and 14.2 ± 1.7 μm in width. In terms of physical properties, the measured thermal expansion coefficient (TEC) of (Mo_2/3Y_1/3)₂AlC was 8.99 × 10⁻⁶ K⁻¹, and the thermal capacity and thermal conductivity at room temperature were 0.43 J·g⁻¹·K⁻¹ and 13.75 W·m⁻¹·K⁻¹, respectively. The room temperature electrical conductivity of (Mo_2/3Y_1/3)₂AlC ceramic was measured to be 1.25 × 10⁶ Ω⁻¹·m⁻¹. In terms of mechanical properties, Vickers hardness under 10 N load was measured as 10.54 ± 0.29 GPa, while flexural strength, fracture toughness, and compressive strength were determined as 260.08 ± 14.18 MPa, 4.51 ± 0.70 MPa·m^1/2, and 855 ± 62 MPa, respectively, indicating the promising structural applications.     

Interdependence of piezoelectric coefficient and film thickness in LiTaO3 cantilevers

Electromechanical energy demands on homogenous thick films of piezoceramics with sufficiently large piezoelectric constant and reproducible performance. Single-phase LiTaO₃ films deposited by sol-gel processing have been fabricated as cantilevers to investigate the interdependence of dielectric and piezoelectric properties as a function of film thickness. Phase pure LiTaO₃ films with varying thickness in the range of 2.07-4.37 µm on stainless steel substrates were obtained after calcination of samples at 650°C. The relative permittivity of optimized spin-coated films peaked at 479.73 (1 kHz), whereas the piezoelectric coefficient (d₃₃ mode) determined by piezoresponse force microscopy was in the range of 21-24 pm/V. The effect of poling was studied through the butterfly and phase curves. A figure of merit (FOM) up to 3.29 (10⁻¹⁸ m²/V²) was determined for cantilever devices, which were able to generate a peak-to-peak voltage of 0.046-0.15 V using a 1 MΩ resistor as an impedance load at a fixed acceleration of 1.5 m/s². While the power density was in the range of ~4-20 × 10⁻⁹ W/m³, which increased with the increasing film thickness. The leakage current density decreased in the range of 4 × 10⁻⁵-6 × 10⁻⁷ A/m² in the same direction. As both ferroelectric and piezoelectric properties of LiTaO₃ films are dependent on film thickness, an optimal energy conversion efficiency was obtained for a thickness of ~3 µm. Furthermore, these devices were tested up to a temperature of 150°C for voltage generation. Given the need for lead-free piezoelectric materials for environmental applications, these LiTaO₃ cantilevers are very promising for vibrational energy harvester (VEH) applications especially due to their cost effectiveness, small size, stability at higher temperatures, and repeatable properties, which makes them suitable for MEMS devices for industrial applications.     

Microstructures and properties of solid-state-sintered silicon carbide membrane supports

Porous solid-state-sintered SiC (S–SiC) membrane supports were successfully fabricated by pressureless sintering at 2150 °C in argon, using fine and coarse graded SiC powders as the main starting material. There were uniformly distributed and fully interconnected pores in as-acquired S–SiC membrane supports, accompanied with similar apparent porosities for all of them. When increasing the size of coarse SiC powder, their average pore sizes were distinctly enlarged from ∼1.6 μm to ∼2.3 μm, which significantly enhanced their nitrogen permeability from 0.9 × 10⁻¹³ m² to 2.6 × 10⁻¹³ m². Moreover, S–SiC membrane supports possessed outstanding flexure strengths of 134.1 ± 21.3 MPa at room temperature and 88.7 ± 8.4 MPa at 1000 °C owing to strong interface bonding between SiC grains. Compared with the traditional SiO₂ -bonded and mullite-bonded SiC supports, S–SiC membrane supports presented their great superiority in high-temperature flexure strength as well as acid and alkali corrosion resistance, which permitted them to be potentially applied in high-temperature and strongly corrosive environments.     

High oxygen barrier materials from paper to regenerated cellulose films

A transparent, bendable, high oxygen barrier cellulose-based film was prepared, which has far better oxygen barrier properties than conventional polyethylene, polypropylene and cellophane materials. A series of regenerated cellulose films (RCs) were prepared from filter paper lacking oxygen barrier properties under different cellulose concentrations and gelation times. It was shown that the cellulose concentration and gel time had a greater effect on the oxygen barrier properties of RCs. When the cellulose concentration was 4 wt% and the gel time was 3 h, the RCs obtained the lowest oxygen permeability coefficient (OPC) down to 2.21 × 10⁻¹⁷ cm³ cm cm⁻² s⁻¹ Pa⁻¹. The films have a tensile strength of 109.5 MPa, an elongation at break of 27.3% and a light transmission rate of 89%. In further, molecular dynamics simulations showed that when the filter paper was converted to RCs, the increase in hydrogen bonding and the decrease in free volume between cellulose chains caused a decrease in the diffusion coefficient of oxygen. As a novel biobased high oxygen barrier material, the film has broad application prospect in packaging and chemical industry.     

Mechanical properties and water vapor permeability of thin film from corn hull arabinoxylan

Isolated corn hull arabinoxylan was dissolved in water and provided a clear solution. Plasticizer (glycerol, propylene glycol, or sorbitol) was added to the arabinoxylan solution at 0–20 wt % (film dry weight), which was cast into stable films. Film thickness ranged from 22 to 32 μm. Mechanical properties, moisture content, and water vapor permeability (WVP) were studied for the arabinoxylan‐based films as a function of plasticizer concentration. Measured data for the corn hull arabinoxylan–based films were 13–18 wt % moisture content, 10–61 MPa tensile strength, 365–1320 MPa modulus, 6–12% elongation, and 0.23–0.43 × 10^?10 g m^?1 Pa^?1 s^?1 water vapor permeability. Plasticized arabinoxylan films produced in this study had lower WVPs than those of unplasticized films, which is likely attributable to the phenomenon known as antiplasticization. Scanning electron micrographs showed a homogeneous structure on film surfaces. Films containing sorbitol had the best moisture barrier properties. When grapes were coated with arabinoxylan and arabinoxylan/sorbitol films, weight loss rates of the fruit decreased by 18 and 41%, respectively, after 7 days. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 2896–2902, 2004     

Polymerization of methyl methacrylate by imidazole–carbon tetrachloride charge-transfer system

The kinetics of charge-transfer (CT) polymerization of methyl methacrylate (MMA) in the presence of imidazole (Imy) and CCl₄ was studied in dimethyl sulfoxide (DMSO) at 60°C. The rate of polymerization (R_p) is sensitive to the [CCl₄] up to a concentration of 0.60 mol L⁻¹, but at a higher concentration, it is practically independent of the [CCl₄]. When [CCl₄] > [Imy], R_p is proportional, to [MMA]^1.45±0.15 and [Imy]^0.53±0.04 and the average rate constant for the polymerization of MMA is 3.25±0.41 × 10⁻⁶ L mol⁻¹ s⁻¹. This article also reports the polymerization of MMA initiated by Imy and CCl₄ and accelerated by hexakis (dimethyl sulfoxide) iron (III) perchlorate, [Fe(DMSO)₆] (CIO₄)₃ (A), at 60°C. The presence of Fe(Imy)³⁺₃ in the polymerization system produced well-defined induction periods. The rate constant at 60°C for the interaction of the poly(MMA) radical toward Fe(Imy)³⁺₃ is 7.19 × 10⁴ L mol⁻¹ s⁻¹. A probable reaction mechanism for the polymerization system has been postulated to explain the observed results. © 1996 John Wiley & Sons, Inc.     

Branched-pore model applied to the adsorption of basic dyes on carbon

The branched-pore adsorption model, expressed by an external mass transfer coefficient k_f, a solid diffusivity D_s, a lumped micropore diffusion rate parameter k_b, and the fraction of macropores f, describes kinetic data from initial contact of adsorbent-adsorbate to the long-term ( > 24 hours) adsorption stages with reasonable accuracy.In this work the model is applied for three basic dye systems, namely Basic Red 22, Basic Yellow 21 and Basic Blue 69, all on carbon. A single value of each parameter describes each dye system. The k_f values are 0.18 × 10⁻²±28%, 0.3 × 10⁻²±17% and 0.2 × 10⁻² ± 20% cm s⁻¹, the D_s values are 0.33 × 10⁻⁹ 21%, 0.72 × 10⁻⁹ ± 9% and 0.72 × 10⁻⁹ ± 9% cm² s⁻¹, the k_b values are 0.65 × 10⁻⁶ ± 7.7%, 1.8 × 10⁻⁶ 0.2 × 10⁻⁶ 1% s⁻¹, while the f values are 0.55 ± 9%, 0.60 ± 10 % and 0.18 ± 11%, each for Basic Red 22, Basic Yellow 21 and Basic Blue 69 respectively.The model is based on the internal structure of the carbon particle being divided into a macropore and a micropore region. The latter has an upper-bound capacity of 241, 245 and 656 mg g⁻¹ for Basic Red 22, Basic Yellow 21 and Basic Blue 69 respectively. A sensitivity analysis for each parameter has been carried out.     

Electrical properties of Sb and Cr-doped PbZrO3–PbTiO3–PbMg1/3Nb2/3O3 ceramics

The pyroelectric, dielectric and DC resistive properties of Sb and Cr-doped ceramics with a base composition of Pb(Mg_1/3Nb_2/3)_0.025(Zr_0.825Ti_0.175)_0.975O₃ have been studied. Sb doping has been shown to produce a linear reduction in Curie temperature (T_C=−22z+294 °C) with concentration (z) and to give an increase in pyroelectric coefficient from 250 to 310 μCm⁻² K⁻¹ for z increasing from 0 to 3 at.%. It also produces first a reduction and then an increase in both dielectric constant and loss, so that the 33 Hz pyroelectric figures of merit (FOM's) are as follows: F_V peaks at 3.8×10⁻² m² C⁻¹ and F_D peaks at 1.2×10⁻⁵ Pa^−1/2. The resistivity is increased substantially from 1.1×10¹¹ to ca 6×10¹¹ Ωm with 1 at.% Sb, thereafter changing little. The behaviour has been explained in terms of Sb acting as a donor ion, reducing oxygen vacancy concentrations up to 1 at.%, with conductivity dominated by hole hopping between traps (E_a=0.59±0.05 eV) that are not changed by the Sb doping. It is concluded that additions of higher levels of Sb do not produce electron-mediated hopping conduction. The Cr additions have no effect upon T_C, but reduce dielectric constant and loss, pyroelectric coefficient and resistivity at doping levels up to 3 at.%. The FOM F_V peaks at 3.6×10⁻² m² C⁻¹ and F_D at 1.9×10⁻⁵ Pa^−1/2. The behaviour of the electrical resistivity as a function of dopant level is shown to produce a linear ln(σ_o) vs z^−1/3 dependence (σ_o=DC conductivity), as would be expected for hole hopping conduction between Cr³⁺ sites, with an E_a=0.38±0.03 eV.     

Extraction rates of amino acids by an emulsion liquid membrane with tri-n-octylmethylammonium chloride

The extraction rates of amino acids from alkaline aqueous solution into an emulsion liquid membrane containing tri-n-octylmethylammonium chloride as a carrier and Paranox 100 as an emulsifier were measured using a stirred transfer cell. The effects of agitation speed (0·33–0·66 rev s⁻¹), amino acid concentrations (0·5–50 mol m⁻³) and temperature (10–45°C) on the extraction rates were examined. The results were analyzed by a double-film model. The mass transfer coefficients of amino acids (0·26–1·58×10⁻⁵ m s⁻¹) and their complexes (0·60–1·72×10⁻⁵ m s⁻¹) were found to correlate well with the hydrophobicities of the amino acids. It was found that the surfactant layer influenced the mass transfer processes of both amino acids in the aqueous film and their complexes in the organic film. The permeation of amino acids with a large hydrophobicity through the emulsion liquid membrane was promoted by both high distribution and larger mass transfer rates. © 1998 Society of Chemical Industry