A review on the potential biodegradability of poly(ethylene terephthalate)

This paper reviews the state of the art in the field of the hydrolytic degradation of poly(ethylene terephthalate) (PET) under bio-environmental conditions. Most of the papers published so far on this subject have been focused on the hydrolysis of PET at high temperatures. Although some authors claim to enhance the biodegradation properties of this aromatic polyester by copolymerization with readily hydrolysable aliphatic polyesters, no clear and satisfying conclusions can yet be formulated. Poly(ethylene terephthalate-co-lactic acid), poly(ethylene terephthalate-co-ethylene glycol), and poly(ethylene terephthalate-co-ε-caprolactone) block and random copolymers are the modifications mainly investigated for biodegradable applications. The hydrodegradability and biodegradability of PET, PET copolymers and PET blends are detailed in this review. A total of 89 references including 16 patents are cited. © 1999 Society of Chemical Industry     

Synthesis and crystallization behavior of segmented copolyesters/silica composites

Silica were introduced to segmented copolyester system (poly(butylene terephthalate)‐poly(ethylene terephthalate‐co‐isophthalate‐co‐sebacate) (PBT‐PETIS)) by in situ polymerization. Investigations on melting behavior and crystalline structure were undertaken, and the dispersion situation of silica in segmented copolyester composites was detected. A diverse crystallization characteristic has been found when the modified Avrami analytical method was applied to investigate nonisothermal crystallization behavior of the composites. Crystallization rate was restricted rather than be promoted by increasing loading of silica. The values of Avrami exponent ranged from 2.25 to 2.45, presenting a mechanism of three‐dimensional spherulitic growth with heterogeneous nucleation. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 1052–1058, 2006     

Syntheses and properties of the PET‐co‐PEA copolyester

An aliphatic‐aromatic random‐block copolyester of poly(ethylene terephthalate) (PET), and poly(enthylene adipate) (PEA), PET‐co‐PEA, was synthesized via melt polycondensation. The chemical structure of the products were characterized by two kinds of spectroscopic techniques (Fourier transform infrared and ¹H‐NMR). The thermal properties of the copolyester were characterized by thermogravimetry analysis, differential scanning calorimetry, wide‐angle X‐ray diffraction, and polarized optical microscopy. It was found that the crystallization ability, melting point, glass transition temperature of the random‐block coplyester decreased apparently. Meanwhile, the tensile strength and hydrolysis performance were measured as well. The result showed that the random‐block copolyesters PET‐co‐PEA displayed excellent properties in elasticity and strength. In addition, the potential degradability was found in hydrolysis measurement. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44967.     

Preparation and biodegradation of copolyesters based on poly(ethylene terephthalate) and poly(ethylene glycol)/oligo(lactic acid) by transesterification

The poly(ethylene terephthalate‐co‐ethyleneoxide‐co‐DL ‐lactide) copolymers were successfully prepared by the melt reaction between poly(ethylene terephthalate), poly(ethylene glycol), and DL ‐oligo(lactic acid) without any catalysts. The transesterification between ethylene terephthalate, ethyleneoxide, and lactide segments during the reaction was confirmed by the ¹H NMR analysis. The effect of reaction temperatures and the starting feed ratios on the molecular microstructures, molecular weights, solubility, thermal properties, and degradability of the copolyesters was extensively studied. The values of crystallization temperature, melting temperature, crystallization, and melting enthalpy of the copolyesters were found to be influenced by the reaction temperatures, starting feed ratios, etc. The copolyesters showed good tensile properties and were found to degrade in the soil burial experiments during the period of 3 months. The morphology of the copolyester films were also investigated by scanning electron microscopy during soil burial degradation. POLYM. ENG. SCI., 2010. © 2009 Society of Plastics Engineers     

Synthesis and properties of poly(tetramethylene terephthalate-co-ethylene terephthalate)–poly(tetramethylene ether) segmented copolymers

A series of polyether–copolyester segmented copolymers ((PBT–PET)PTMG) based on hard segments of tetramethylene terephthalate–ethylene terephthalate copolyester (PBT–PET) and soft segments of poly(tetramethylene ether)(PTMG) was synthesized. The hard : soft segment weight ratio was 30 : 70 and the mole ratio of PBT : PET was 1 : 10; 1 : 6; 1 : 1; 3 : 1, respectively. Their mechanical properties, morphology, crystallization behavior and optical transparency were investigated and compared with poly(tetramethylene terephthalate)–poly(tetramethylene ether)(PBT–PTMG), as well as with poly(ethylene terephthalate)–poly(tetramethylene ether)(PET–PTMG), consisting of the equivalent composition ratio of hard and soft segments. It was found that the transparency could be improved by introducing a small amount of PBT into PET–PTMG through copolymerization. However, a decrease was observed in the transparency if more PBT was added. This is due to the fact that the copolymerization makes both crystallinity and crystallization rate decrease.     

Antielectrostatic poly(ether ester) block copolymer of poly(ethylene terephthalate‐co‐isophthalate)–poly(ethylene glycol)

Poly(ethylene terephthalate) (PET) fiber has a low moisture regain, which allows it to easily gather static charges, and many investigations have been carried out on this problem. In this study, a series of poly(ethylene terephthalate‐co‐isophthalate) (PEIT)–poly(ethylene glycol) (PEG) block copolymers were prepared by the incorporation of isophthalic acid (IPA) during esterification and PEG during condensation. PEG afforded PET with an increased moisture affinity, which in turn, promoted the leakage of static charges. However, PET also then became easier to crystallize, even at room temperature, which led to decreased antistatic properties and increased manufacturing inconveniences. IPA was, therefore, used to reduce the crystallinity of the copolymers and, at the same time, make their crystal structure looser for increased water absorption. Moreover, PET fibers with incorporated IPA and PEG showed good dyeability. In this article, the structural characterization of the copolymers and antistatic and mechanical properties of the resulting fibers are discussed. At 4 wt % IPA, the fiber containing 1 mol % PEG with a molecular weight of 1000 considerably improved antistatic properties and other properties. In addition, the use of PEIT–PEG as an antistatic agent blended with PET or modified PET fibers also benefitted the antistatic properties. Moreover, PEIT–PEG could be used with another antistatic agent to produce fibers with a low volume resistance. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 1696–1701, 2003     

New copolyesters derived from terephthalic and 2,5-furandicarboxylic acids: A step forward in the development of biobased polyesters

A straightforward partial substitution of non-renewable poly(ethylene terephthalate) by renewable homologous poly(ethylene furandicarboxylate) was successfully done by random copolymerisation of bis(2-hydroxyethyl) terephthalate and bis(hydroxyethyl)-2,5-furandicarboxylate. Different stoichiometric amounts of these monomers were used and the ensuing copolyesters were characterised in detail by several physical chemistry, thermal and mechanical techniques. All copolyesters have the expected chemical structure incorporating both aromatic and furanic units in different amounts accordingly to the stoichiometric feed-ratio. In particular the copolyester having 20% of furan units (PET-ran-PEF 4/1) have similar properties to those of PET homopolyester, despite some minor differences, being a semi-crystalline copolyester with similar glass transition and melting temperatures to those of PET. Also, the mechanical performance of this PET-ran-PEF 4/1 copolyester was in accordance with the PET operating temperature range, tan δ and modulus.     

Synthesis and characterization of poly(L‐lactic acid)‐b‐poly(ethylene terephthalate‐co‐sebacate)‐b‐poly(L‐lactic acid) copolyesters

Random copolyester namely, poly(ethylene terephthalate‐co‐sebacate) (PETS), with relatively lower molecular weight was first synthesized, and then it was used as a macromonomer to initiate ring‐opening polymerization of l ‐lactide. ¹H NMR quantified composition and structure of triblock copolyesters [poly(l ‐lactic acid)‐b‐poly(ethylene terephthalate‐co‐sebacate)‐b‐poly(l ‐lactic acid)] (PLLA‐PETS‐PLLA). Molecular weights of copolyesters were also estimated from NMR spectra, and confirmed by GPC. Copolyesters exhibited different solubilities according to the actual content of PLLA units in the main chain. Copolymerization effected melting behaviors significantly because of the incorporation of PETS and PLLA blocks. Crystalline morphology showed a special pattern for specimen with certain composition. It was obvious that copolyesters with more content of aromatic units of PET exhibited increased values in both of stress and modulus in tensile test. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Effects of a small amount of poly(ethylene glycol) on the non-isothermal cold crystallization of uniaxially oriented poly(ethylene terephthalate) fibers

The kinetics of non-isothermal crystallization of uniaxially oriented poly(ethylene terephthalate) fibers modified by poly(ethylene glycol)(PET-co-PEG) was investigated by using a DSC heating scanning method and analyzed by using a new non-isothermal equation. Two crystallization peaks appeared for PET and PET-co-PEG fibers. The kinetics parameters, such as the Avrami exponent, the activation energies of diffusion, and the weight fractions per sub-process, were obtained. Based on the Avrami exponent, peak position, and crystallization rate, the crystallization mechanism was proposed.     

Enhancement of fiber structure formation of a liquid crystalline copolyester via ultra-high speed bicomponent spinning with poly(ethylene terephthalate)

A thermotropic liquid crystalline copolyester, poly(hydroxybenzoic acid-co-ethylene terephthalate) (LCP), and poly(ethylene terephthalate) (PET) were coextruded using two different extrusion systems to form sheath-core type biocomponent fibers. The bicomponent fibers could be spun up to a take-up velocity of 8 Km/min. The structural characterization of the individual components in the as-spun fibers showed that the orientation development in the PET component was significantly suppressed compared with the corresponding single component fibers. A significant increase in the tensile modulus of the LCP core component, which was estimated by the simple rule of mixtures, was observed above a take-up velocity of 4 km/min. The increase in tensile modulus was attributed to the increase in the overall orientation of the LCP core resulting from the combination of the high levels of stress generated during spinning at very high speeds and the altered thermal and stress generated during spinning at very high speeds and the altered thermal and stress histories provided by the bicomponent spinning process. On-line study of the thinning behavior of single component and bicomponent spinning was carried out in order to gain an understanding of the spinline dynamics, which improved the processability and structure development of LCP.     

The crystallization rate of poly(ethylene terephthalate) accelerated by co[poly(butylene terephthalate‐p‐oxybenzoate)] copolyesters

Poly(ethylene terephthalate) (PET) was blended with three different kinds of co[poly(butylene terephthalate‐p‐oxybenzoate)] copolyesters, designated B28, B46, and B64, with the level of copolyester varying from 1 to 15 wt %. All samples were prepared by solution blending in a 60/40 by weight phenol/tetrachloroethane solvent at 50°C. The crystallization behavior of samples was then studied via differential scanning calorimetry. The results indicate that these three copolyesters accelerate the crystallization rate of PET in a manner similar to that of a nucleating agent. The acceleration of PET crystallization rate was most pronounced in the PET/B28 blends with a maximum level at 10 wt % of B28. The melting temperatures for the blends are comparable with that of pure PET. The observed changes in crystallization behavior are explained by the effect of the physical state of the copolyester during PET crystallization as well as the amount of copolyester in the blends. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 76: 587–593, 2000     

The thermal shrinkage of the drawing poly(ethylene isophthalate terephthalate) copolyester films

The objective of this study is to use the copolymerization method to improve the thermal shrinkage property of poly(ethylene terephthalate) (PET), so that the resultant copolyester can be used for the application of thermal shrinkage packing materials. The poly(ethylene isophthalate terephthalate) (PEIT) copolyester films were prepared and studied. The thermal shrinkage rate of PET films and the thermal shrinkage rate of the copolyester films were measured by using a thermomechanical analyzer (TMA). The thermal shrinkage of copolyester was found to be dependent on such factors as composition, molecular weight, and draw temperature. The highest thermal shrinkage was obtained when the copolymer contained 40 mol % of ethylene isophthalate. Its shrinkage ratio and shrinkage rate were consistently 1.3 and 2.4 times those of PET. The increase of molecular weight and decrease of drawing temperature resulted in the increase of the thermal shrinkage. The best drawing temperature range was between glass transition temperature and soft temperature of the copolymer. The relationship of shrinkage rate and temperature indicate that the shrinkage mechanism of the copolyester belongs to two-step thermal shrinkage.     

Fully bio‐based polyesters derived from 2,5‐furandicarboxylic acid (2,5‐FDCA) and dodecanedioic acid (DDCA): From semicrystalline thermoplastic to amorphous elastomer

A serials of fully bio‐based poly(ethylene dodecanedioate‐2,5‐furandicarboxylate) (PEDF) were synthesized from Dodecanedioic acid (DDCA), 2,5‐Furandicarboxylic acid (2,5‐FDCA), and ethylene glycol through a two‐step procedure consisted of transesterification and polycondensation. After their chemical structures were confirmed by Nuclear Magnetic Resonance and Fourier Transform Infrared Spectroscopy, their thermal, mechanical, and biodegradation properties were investigated in detail. Results showed that the chemical composition of PEDFs could be easily controlled by the feeding mole ratio of DDCA to FDCA and they possessed the characteristic of random copolyester with the intrinsic viscosity ranged from 0.82 to 1.2 dL/g. With the varied mole ratio of DDCA to FDCA, PEDFs could be changed from semicrystalline thermoplastic to the completely amorphous elastomer, indicated by the elongation at break ranged from 4 for poly(ethylene 2,5‐furandicarboxylate) to 1500% for amorphous PEDF‐40. The amorphous PEDF‐30 and PEDF‐40 showed satisfactory shape recovery after cyclic tensile test, which was the typical behavior for elastomer. Enzymatic degradation test indicated that all the PEDFs were biodegradable and the degradation rate was heavily affected by their chemical compositions. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46076.     

Co[poly(ethylene terephthalate-p-oxybenzoate)] thermotropic copolyester. II. X-ray diffraction analysis

A series of co[poly(ethylene terephthalate-p-oxybenzoate)] thermotropic copolyester with different compositions were prepared by the copolymerization of either poly(ethylene terephthalate) (PET) polymer or its oligomer with p-acetoxy-benzoic acid. The polymeric products were subjected to solid-state polymerization for various time intervals. Effects of composition ratio and solid-state polymerization time on X-ray diffraction behavior were investigated. It is found that the effect of transesterification induced by solid-state polymerization causes an increase in crystallinity with the copolyesters having high mol % of p-oxybenzoic acid (POB) moiety and causes a decrease in crystallinity with the copolyesters having high mol % of PET moiety. In general, the crystallinity of copolyesters is first increased and then decreased as solid-state polymerization time proceeds. However, the crystallinity of copolyester having POB/PET = 80/20 composition is increased generally at 4-h solid-state polymerization. It is also found that the crystallinity of copolyesters is decreased by quenching. The copolyester based upon either PET oligomer with 4-h solid-state polymerization or PET polymer with 8-h solid-state polymerization shows the most similar X-ray diffraction pattern with that of Eastman 10109. © 1993 John Wiley & Sons, Inc.     

Crystallization behavior of poly(ethylene terephthalate‐co‐neopentyl terephthalate‐co‐ethylene isophthalate‐co‐neopentyl isophthalate) copolyester and its application in laminated tin‐free steel

A low crystallinity, the copolyester poly(ethylene terephthalate‐co‐neopentyl terephthalate‐co‐ethylene isophthalate‐co‐neopentyl isophthalate) (PENIT) was synthesized and applied for laminated tin‐free steel. The structures and thermal properties of the copolyester were characterized by ¹H‐NMR, thermogravimetry analysis, differential scanning calorimetry, wide‐angle X‐ray diffraction, and polarized optical microscopy. Differential scanning calorimetry, wide‐angle X‐ray diffraction, and polarized optical microscopy results show that the crystallization ability of the copolyester decreased obviously. Meanwhile, the peel strength, crystallinity, and water‐vapor permeability of the copolyester film were also measured at varied lamination temperatures. The result confirm that an improvement in the lamination temperature led to an increased ratio of amorphous PENIT to crystalline PENIT and decreased structural orientation, and the decrease in the structural orientation sped up the increase in the rate of water‐vapor permeability. On the basis of the purpose of reducing a detrimental effect on the corrosion resistance caused by water permeation, a reasonable lamination temperature was selected. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42308.     

Microstructure and crystallization of melt‐mixed poly(ethylene terephthalate)/poly(ethylene isophthalate) blends

Physical blends of poly(ethylene terephthalate) (PET) and poly(ethylene isophthalate) (PEI), abbreviated PET/PEI (80/20) blends, and of PET and a random poly(ethylene terephthalate‐co‐isophthalate) copolymer containing 40% ethylene isophthalate (PET₆₀I₄₀), abbreviated PET/PET₆₀I₄₀ (50/50) blends, were melt‐mixed at 270°C for different reactive blending times to give a series of copolymers containing 20 mol % of ethylene isophthalic units with different degrees of randomness. ¹³C‐NMR spectroscopy precisely determined the microstructure of the blends. The thermal and mechanical properties of the blends were evaluated by DSC and tensile assays, and the obtained results were compared with those obtained for PET and a statistically random PETI copolymer with the same composition. The microstructure of the blends gradually changed from a physical blend into a block copolymer, and finally into a random copolymer with the advance of transreaction time. The melting temperature and enthalpy of the blends decreased with the progress of melt‐mixing. Isothermal crystallization studies carried out on molten samples revealed the same trend for the crystallization rate. The effect of reaction time on crystallizability was more pronounced in the case of the PET/PET₆₀I₄₀ (50/50) blends. The Young's modulus of the melt‐mixed blends was comparable to that of PET, whereas the maximum tensile stress decreased with respect to that of PET. All blend samples showed a noticeable brittleness. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 3076–3086, 2003     

Chemosynthesis and characterization of fully biomass‐based copolymers of ethylene glycol, 2,5‐furandicarboxylic acid,and succinic acid

Poly(ethylene 2,5‐furandicarboxylate‐co‐ethylene succinate) (PEFS) copolymers of 2,5‐furandicarboxylic acid (FDCA) and succinic acid with 11.98–91.32 mol % FDCA composition were synthesized via melt polycondensation in the presence of ethylene glycol using tetrabutyl titanate as a catalyst. PEFSs' molecular weight, thermal properties, and molar composition were determined by Fourier transform infrared spectroscopy, gel permeation chromatography, intrinsic viscosity, ¹H NMR, differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), and wide‐angle X‐ray diffraction (WAXD) measurements. From experimental conditions, we obtained random copolymers with number‐average molecular weights exceeding 25,600, determined by GPC and ¹H NMR analyses. DSC analysis revealed that PEFS copolymers' melting temperatures differed depending on EF units' percentage. TGA studies confirmed that all PEFS copolymers' thermal stability exceeded 300°C. From WAXD analysis, it is observed that the PEFS copolymer crystal structure was similar to that of PES when EF unit was 11.98 mol % and to that of PEF when EF units were 74.35 and 91.32 mol %. These results benefit this novel biodegradable copolymer to be used as a potential biomaterial. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 130: 1415‐1420, 2013     

Blends of poly(ethylene terephthalate) with co[poly(ethylene terephthalate-p-oxybenzoate)]. II. Composition effect on the rate of crystallization

Poly(ethylene terephthalate) (PET) was blended with four different kinds of co[poly(ethylene terephthalate-p-oxybenzoate)] copolyesters, designated P28, P46, P64, and P82, with the level of copolyester varing from 1 to 15 wt %. All samples were prepared by melt-mixing in a Brabender Plasticorder for 8 min. The crystallization behavior of samples were then studied via DSC. The results indicate that these four copolyesters accelerate the crystallization rate of PET in a manner similar to that of a nucleating agent. The acceleration of the PET crystallization rate was most pronounced in the PET/P28 blends with a maximum level at 10 wt % of P28, and in the PET/P28 blends, at 5 wt % of P82. The melting endotherm onset temperatures and the melting peak widths for the blends are comparable with those of neat PET. These results imply that the stability of PET crystalline phase in the blends does not change by blending. The observed changes in crystallization behavior, however, are explained by the effect of the physical state of the copolyester during PET crystallization as well as the content of the p-oxybenzoate (POB) moiety in corporated into the blends. © 1995 John Wiley & Sons, Inc.     

Characterizations for blends of phosphorus-containing copolyester with poly(ethylene terephthalate)

High molecular weight phosphorus-containing copolyesters, poly(ethylene terephthalate)-co-poly(ethylene DDP) (PET-co-PEDDP)s, were prepared and characterized with the objective of producing a non-halogen flame retardant system for practical applications. The phosphorus-containing copolyester with 30 wt% phosphorus (P30 copolyester) was blended with PET to evaluate their characteristics and flame retardancy. Higher phosphorus content results in lower crystallinity and higher char formation after thermal degradation. The rheological behavior remains similar to that of PET. The P30/PET blend possesses higher crystallization rate than the corresponding phosphorus-containing copolyester containing equal phosphorus content. Thermal and rheological behaviors of P30/PET blends are similar to PET or the phosphorus-containing copolyesters. The P30/PET blends are miscible or compatible base on single T_gs detected by DSC or DMA. The SEM/EDX phosphorus mapping image of the P30/PET blend shows uniform distribution of the phosphorus moieties within the P30/PET matrix, another indication of a compatible or miscible blend between the phosphorus-containing copolyester P30 and PET. Flame retardancy of the P30/PET blend is identical to that of the phosphorus-containing copolyester with identical phosphorus content. Blending of high phosphorus content copolyester with virgin PET provides a feasible method to obtain a flame resistant PET with LOI greater than 28.     

Poly(ethylene terephthalate)/poly(ethylene glycol‐co‐1,3/1,4‐cyclohexanedimethanol terephthalate)/clay nanocomposites: Effects of biaxial stretching

In this study, we fabricated poly(ethylene terephthalate) (PET)/clay, PET/poly(ethylene glycol‐co‐1,3/1,4‐cyclohexanedimethanol terephthalate) (PETG), and PET/PETG/clay nanocomposite plates and biaxially stretched them into films by using a biaxial film stretching machine. The tensile properties, cold crystallization behavior, optical properties, and gas and water vapor barrier properties of the resulting films were estimated. The biaxial stretching process improved the dispersion of clay platelets in both the PETG and PET/PETG matrices, increased the aspect ratio of the platelets, and made the platelets more oriented. Thus, the tensile, optical, and gas‐barrier properties of the composite films were greatly enhanced. Moreover, strain‐induced crystallization occurred in the PET/PETG blend and in the amorphous PETG matrix. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42207.