玄武岩短纤维增强硅橡胶复合材料的制备及性能

采用玄武岩短纤维(BF)增强硅橡胶,制备了BF/硅橡胶复合材料,考察了硅烷偶联剂的种类、BF用量以及硫化条件对复合材料力学性能的影响,并用扫描电子显微镜观察了复合材料的微观形貌。结果表明,用KH 550对BF进行表面处理,所得复合材料的力学性能优于以Si 69处理的材料;当BF用量为20份时,BF/硅橡胶复合材料的力学性能最好;制备复合材料的最佳硫化条件为10 MPa×175℃×25 min;用KH 550处理BF,BF与硅橡胶的相容性比用Si 69处理的好。     

连续玄武岩纤维的发展与应用

介绍了连续玄武岩纤维国内外发展概况和主要性能,阐述了连续玄武岩纤维在各领域的应用,展望了其应用前景。表明连续玄武岩纤维是一种独特的环境友好型绿色新材料,具有较高的力学性能、使用温度、化学稳定性和性能价格比;它的应用遍及土木建筑、交通运输、环保能源、化工纺织等国民经济各个领域,并有望在航空航天、新能源、海洋、生物医学、通讯信息、国防军工等新兴高科技产业中得到广泛应用。     

偶联剂Si 69对NR/BR/NBR共混硫化胶性能的影响

研究了偶联剂Si 69对NR／BR／NBR共混胶体系的硫化特性、交联密度和硫化胶的物理机械性能及动态力学性能的影响。结果表明，偶联剂Si 69在共混硫化胶中可以起到提高聚合物与填料间的相互作用和交联密度的作用，它在白炭黑增强硫化胶中对性能的改善比在炭黑增强硫化胶中的改善更显著。     

我国连续玄武岩纤维产业的特征及可持续发展

通过对我国连续玄武岩纤维产业8大特征和4大技术瓶颈的简要分析,重点揭示了该新材料产业"绿色资源、高端创新"的特点及其发展走向;创新地提出了CBF是绿色产业,是我国的战略性创新材料的观点;阐述了它是关乎国家国防安全战略和促进国民经济升级换代的重要的基础材料;提出了该产业可持续发展和对我国后"十二五"发展纲要的一些建议。     

Effects of silane coupling agents on internal reinforcement of wood by E-glass and basalt fibers

The internal reinforcement of Douglas-fir by glass or basalt fibers impregnated with resorcinol-phenol-formaldehyde or polymeric diphenylmethanediisocyanate bonding resins has been investigated. The objective was to evaluate the improvement in composite properties by the use of silane coupling agents. Fibers were treated with 3-(4-methoxyphenyl) propyl methyldichlorosilane for use with the phenolic resin, and with 3-aminopropyl triethoxysilane for use with the isocyanate resin. Resin impregnated fiber plies were sandwiched between wood pieces to prepare test specimens with 17 vol. % fiber for measurement of block shear strength, and modulus of rupture (MOR) and modulus of elasticity (MOE) in 3-point bending, and interlaminar shear strength in 5-point bending. The durability under wet conditions was evaluated by subjecting the specimens to an accelerated exposure test (ASTM D2559). It was found that silane application resulted in slight shear strength improvement under dry conditions but much higher increase in shear strength retention after exposure to moisture. Basalt fibers and E-glass fibers gave similar results and comparable properties.     

偶联剂KH-570对木薯淀粉/天然橡胶复合材料性能的影响

采用偶联剂KH-570对木薯淀粉/NR复合材料进行改性,研究了偶联剂KH-570对复合材料结构和性能的影响.结果表明:加入KH-570后,木薯淀粉/NR复合材料的定伸应力、拉伸强度和撕裂强度提高;当KH-570用量为3％时,复合材料的综合力学性能最佳.SEM分析表明,KH-570增强了木薯淀粉与天然橡胶间的界面结合;加...     

Effects of heat and moisture on characteristics,tensile properties of RFL‐coated rayon cords,and their adhesion with NR/SBR matrix

The objective of this study was to evaluate the effects of heat and moisture on the characteristics and tensile properties of resorcinol‐formaldehyde‐latex (RFL)‐coated rayon cords and their adhesion to the natural rubber (NR)/styrene‐butadiene rubber (SBR) matrix. The water absorption ratio, shrinking percentage, breaking force, and elongation at break of the cords, which were treated under various temperature‐humidity conditions, were tested, and an attenuated total reflection (ATR)‐Fourier transform infrared (FTIR) spectroscopy was used to investigate the chemical changes of the outer RFL layer. The static adhesion was investigated by an H pull‐out test, and the evolution of the adhesive properties of the RFL‐coated rayon cord/rubber matrix was tracked by an elastomer testing system. A scanning electron microscope (SEM) was employed to observe the interfacial fracture caused by both H pull out and fatigue. The results of this investigation show that the moisture absorption significantly affects the characteristics and the mechanical properties of rayon cords. The chemical state of the RFL layer and the static adhesion of the cord/rubber matrix were not obviously affected, but the interfacial fatigue life was extended due to the decrease of the load in the second of three fatigue stages, which was caused by a reduction in the modulus of the rayon cords. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 45559.     

Improved interfacial adhesion with the help of functional polyhedral oligomeric silsesquioxanes in silicone rubber/rayon fiber composites: Physical,mechanical, thermal,and morphological properties

The aim of this article is to improve the interfacial adhesion between silicone rubber (SR) and Rayon fiber by the help of functional hybrid POSS nanoparticles. Two POSS types were compared, octavinyl-POSS (O-POSS) and methacryl-POSS (M-POSS), having reactive  CC double bonds that can impart in peroxide crosslinking. O-POSS is nonpolar, whereas M-POSS is polar and is able to make H-bond with Rayon fibers. POSS type and their concentrations were examined as the experimental parameters. H-adhesion tests indicated that both POSS types enhanced the adhesion of SR composites to Rayon fibers compared with control recipe. Specifically, slightly higher values were obtained with the use of M-POSS. It was observed that both O-POSS and M-POSS slowed down the curing rate but increased the degree of crosslinking. The cure extent of O-POSS containing composites was found to be higher than that of M-POSS containing ones. Thermal gravimetric analyses revealed that thermal stability of SR composites was significantly improved by the addition of POSS particles. Higher char yield and degradation temperatures were obtained with O-POSS at higher loadings with respect to M-POSS. The POSS distribution at lower loading levels was found to be homogenous for both POSS types as observed from scanning electron microscope and transmission electron microscope.     

NR/SBR并用胶配比对其硫化特性和力学性能的影响

考察了天然橡胶与丁苯橡胶不同配比对并用胶硫化特性和力学性能的影响.无转子硫化仪的测试结果表明,随着丁苯橡胶的占比增加,最小转矩和最大转矩均变大,且两者差值也随之增大,硫化时间延长,硫化胶的拉伸强度和撕裂强度明显下降,硬度增加;120℃老化后拉伸强度有不同程度的下降,天然橡胶占比越多下降越明显.     

偶联剂B对RTV硅橡胶粘接强度的影响

为了提高RTV硅橡胶与金属材料的粘接强度 ,对金属材料表面采用偶联剂处理 ,筛选了多种偶联剂 ,进行了稳定性和加速老化试验 ,测试了试件的剪切强度和扯离强度 ,结果表明偶联剂B具有较佳的性能 ,不仅能够提高粘接强度 ,而且粘接强度稳定     

玄武岩纤维对NR/SBR并用胶性能的影响

研究玄武岩纤维用量对天然橡胶/丁苯橡胶并用胶硫化特性、物理性能和动态力学性能的影响。结果表明:玄武岩纤维能够明显缩短并用胶的焦烧时间和正硫化时间;当玄武岩纤维用量小于10份时,无机填料分散性较好,并用胶综合物理性能变化较小;当玄武岩纤维用量大于10份时,各项物理性能下降明显;增大玄武岩纤维用量,并用胶的Payne效应增强,加工性能下降。     

芳纶以及连续玄武岩纤维和玻璃纤维的耐酸性研究

测试和分析了芳纶、连续玄武岩纤维和玻璃纤维分别在65、80和95℃下浓度为2 mol/L的盐酸溶液中经不同时间的腐蚀后其力学性能以及质量的变化情况。结果表明,芳纶(芳酰胺纤维)的耐酸性能最优,其断裂强力和断裂伸长率的保持率最大;连续玄武岩纤维其次,玻璃纤维最差。因此芳纶比连续玄武岩纤维和玻璃纤维更适合用于酸性环境中,连续玄武岩纤维和玻璃纤维应尽量避免酸液对其的作用。     

空气等离子体处理芳纶纤维及其与天然橡胶/乳聚丁苯橡胶的黏合性能

考察了空气等离子体处理对芳纶纤维表面结构形态的影响,研究了空气等离子体和间苯二酚-甲醛-胶乳(RFL)浸胶处理芳纶纤维与天然橡胶(NR)/乳聚丁苯橡胶(ESBR)的黏合性能,并对经处理的芳纶纤维与NR/ESBR体系的界面层作了动态力学分析。结果表明,芳纶纤维经空气等离子体处理后,表面粗糙度增大,表面积增加,结晶度减小,但处理功率过大、处理时间过长时,芳纶纤维的表面又变得比较光滑、结晶度又呈增大趋势。随着等离子体处理时间的延长,芳纶纤维与NR/ESBR的黏合性能增强,但处理时间过长时,芳纶纤维与NR/ESBR的黏合性能下降;等离子体处理芳纶纤维经RFL进一步浸胶处理后,芳纶纤维与NR/ESBR的黏合性能大幅度提高。芳纶纤维与NR/ESBR的界面存在介于高模量芳纶纤维和低模量橡胶之间的过渡层。     

偶联剂对淀粉/丁苯橡胶复合材料性能的影响

采用乳液共混法制备了淀粉/丁苯橡胶(SBR)以及间苯二酚甲醛树脂(RF)改性淀粉/SBR复合材料,考察了偶联剂对2种复合材料硫化特性、力学性能的影响,并用扫描电镜观察了其相态结构。结果表明,各种偶联剂都能在一定程度上提高淀粉/SBR复合材料的拉伸强度和撕裂强度,其中γ-氨基丙基三乙氧基硅烷(KH-550)和N-β(氨基乙基)-γ-氨丙基三甲氧基硅烷(KH-792)的增强效果最为显著;采用RF对淀粉进行改性,RF改性淀粉/SBR复合材料的力学性能较之淀粉/SBR复合材料的力学性能有了进一步提高。橡胶相与淀粉相界面结合的改善是RF改性淀粉/SBR复合材料力学性能提高的主要原因。     

Synthesis of boron‐containing coupling agents and its effect on the interfacial bonding of fluoropolymer/TATB composite

The four kinds of boron‐containing coupling agents were synthesized, which were applied to improve the interfacial bonding of fluoropolymer/1,3,5‐triamino‐2,4,6‐trinitrobenze (TATB) composite. The boron atom of the coupling agent molecule can form coordinate bond with the fluorine atom of fluoropolymer; and hydrogen atom in its amino group can form hydrogen bond with oxygen atom in nitro‐group of TATB. The interfacial performance of the composite was investigated by the measurement of contact angle, surface and interface tension, and adhesive work, and the interfacial bonding mechanism was studied by FTIR and XPS analysis. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

仿生材料多巴胺对橡胶/钢丝帘线黏合性能的影响

选用子午线轮胎胎体胶料配方作为基本配方,以钢丝帘线作为骨架材料,采用自行研发的橡胶与钢丝帘线动态黏合性能的测试方法,考察了多巴胺及传统黏合体系对橡胶/钢丝帘线动态黏合性能的影响,并探讨了多巴胺替代间苯二酚作为无毒环境友好型黏合剂的可行性。结果发现,钴盐黏合体系赋予了橡胶与钢丝帘线较好的动态黏合,多巴胺体系赋予了较好的静态黏合,间甲白体系居中,3种黏合体系并用可赋予最好的动、静态黏合性能。橡胶/钢丝帘线的动、静态黏合力均随着多巴胺用量的增加而增大,但在拉伸疲劳后出现下降。     

Mechanical and morphological properties of cellular NR/SBR vulcanizates under thermal and weathering ageing

The effects of addition of two chemical blowing agents in cellular rubber blend of natural rubber (NR) and styrene‐butadiene rubber (SBR) at a fixed blend ratio of 1 : 1 on cure characteristics, and mechanical and morphological properties were invesigated. The chemical blowing agents used in this work were Oxybis (benzene sulfonyl) hydrazide (OBSH) and Azo dicarbonamide (ADC). Three different fillers, fly ash (FA) particles, precipitated silica, carbon black (CB) at their optimum concentrations of 40 phr were used, the FA and silica particles being chemically treated by bis‐(3‐triethoxysilylpropyl) tetrasulphide. The results suggested that the overall cure time decreased with OBSH and ADC contents. The OBSH was more effective in cure‐acceleration of the NR/SBR blend than the ADC. The NR/SBR vulcanized foams produced by OBSH and ADC agents had closed‐cell structures. The specific density and mechanical properties of the blend tended to decrease with increasing blowing agent content. The CB gave NR/SBR foams with smaller cell size, better cell dispersion, and higher mechanical properties than the precipitated silica and FA particles. The heat ageing and weathering resulted in an increase in tensile modulus and hardness, but lowered the tensile strength, ultimate elongation and tear strength. The elastic recovery for cellular NR/SBR vulcanizates with FA was superior to that with CB and silica, the elastic recovery of the blends decreasing with blowing agent content. Resilience property was improved by the presence of gas phases. The optimum concentration of OBSH and ADC to be used for NR/SBR vulcanizates was 4 phr. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

白炭黑/偶联剂补强橡胶的性能研究

研究炭黑N330／白炭黑并用比和偶联荆品种及用量对NR胶料性能的影响。结果表明，硅烷偶联剂Si69对白炭黑的改性效果优于钛酸酯偶联剂；硅烷偶联剂Si69在NR胶料中的最佳用量以补强剂用量的5％～10％为宜；建立的数学模型能较好地拟合炭黑N330／白炭黑并用比和硅烷偶联剂Si69用量与NR胶料各项性能之间的关系。     

Studies on adsorptive interaction between natural fiber and coupling agents

Efficacy evaluation of various coupling-agent-treated sisal fibers was made by contact angle measurements and Fourier transform infrared spectroscopy. It was found that high contact angle and reduced hydroxyl groups on titanate-treated fibers favor its better hydrophobicity over the other treatments. The presence of adsorbed layer of coupling agent on the fiber surface was ascertained by appearance, shifting, and decreased intensity of absorption bands. The lowest polar component of surface-free energy for N-substituted methacrylamide-treated fiber indicates the formation of ordered layers of its organofunctionality at the surface. The reason for enhanced interaction between sisal fiber and N-substituted methacrylamide is suggested by the formation of hydrogen bond, besides extracting a surface-active proton from the fiber surface by alkoxy group to form a covalent bond. An optimum treating condition of fiber for effective adsorptive interaction has been reported. The deposition of compound in the form of an aggregate on the fiber surface was also observed under scanning electron microscopy. © 1998 John Wiley & Sons, Inc. J Appl Polym Sci 70: 1847–1858, 1998     

不同发泡剂及工艺条件对BR／SBR／NR发泡材料相结构及尺寸稳定性的影响

分别采用一段和两段模压法制备了以顺丁橡胶（BR）／丁苯橡胶（SBR）／天然橡胶（NR）为基体的橡胶发泡材料,研究了三种化学发泡剂N,N＇-二甲基戊次甲基四胺（H）、4,4＇-氧代双（苯磺酰肼）（OBSH）以及H／OBSH（质量比1：1）复配对发泡及硫化特性的影-向,以及3种发泡剂和2种成型工艺对收缩率及相结构的影响。结果表明,发泡剂H对硫化性能影响最大,含发泡剂H的混炼胶在分解过程中释放的热量最多;加入3种发泡剂都具有一种较大的泡孔镶嵌在较小的泡孔丛中的泡孔形态;密度和线收缩率均随着时间的增加而增加,经H／OBSH复配的发泡剂更适合该体系成型,材料线收缩率均比单独使用H和OBSH小,两段模压法可以有效地提高发泡材料的尺寸稳定性,收缩率降低至3．88％,同时发泡剂使用率最多可提高31．67％。