非线性离散系统的近似最优跟踪控制

研究非线性离散系统的最优跟踪控制问题. 通过在由最优控制问题所导致的非线性两点边值问题中引入灵敏度参数, 并对它进行Maclaurin级数展开, 将原最优跟踪控制问题转化为一族非齐次线性两点边值问题. 得到的最优跟踪控制由解析的前馈反馈项和级数形式的补偿项组成. 解析的前馈反馈项可以由求解一个Riccati差分方程和一个矩阵差分方程得到. 级数补偿项可以由一个求解伴随向量的迭代算法近似求得. 以连续槽式反应器为例进行仿真验证了该方法的有效性．     

Invertible nonlinear parametric functions for systems identification and control

In the field of data-based control system design, nonlinear parametric functions play a key role, in fitting sets of measured data. In many cases, one of the constraints one may wish to impose on the estimated function is the invertibility with respect to one input, a constraint typically hard to handle rigorously with the currently available universal approximators. In this paper, a new class of parametric nonlinear functions, named piecewise multi-parabolic (PMP) functions, is presented. PMP functions can be considered a special class of quadratic splines (or – to some extent — a class of Takagi–Sugeno models with triangular membership functions), the main feature of which is the way they are parametrized. Thanks to such a parametrization, imposing distributed constraints on their first (and second) derivatives, and, in particular, an invertibility constraint, is shown to be easy and computationally efficient. © 1998 John Wiley & Sons, Ltd.     

Robust control of uncertain nonlinear systems with state delays based on an uncertainty and disturbance estimator

In this article, one linear and one nonlinear robust control strategies are proposed for uncertain nonlinear continuous‐time systems with disturbances and state delays. The approaches are based on the uncertainty and disturbance estimator (UDE) introduced in 2004. In the case of a linear controller, the terms containing the nonlinear functions and time delays are treated as additional disturbances to the system. In the case of a nonlinear controller, both known and unknown delay scenarios are considered. In the case of an unknown time delay, the terms containing the delay are treated as additional disturbances to the system. The algorithms provide excellent tracking and disturbance rejection performance. Simulations are given to show the effectiveness of the strategies, first via a simple example and second via an application to a continuous stirred tank reactor system. Copyright © 2010 John Wiley & Sons, Ltd.     

Semi-global stabilization of minimum phase nonlinear systems in special normal forms

We semi-globally stabilize certain minimum phase nonlinear systems which are in a normal form where the nonlinear subsystem is driven by an output of a linear system that possesses (possibly) nonzero peaking exponents. We eliminate the peaking phenomenon by stabilizing part of the linear system with a high-gain linear control and part of the linear system with a small, bounded control. The interpretation of this approach will be that we are redefining the outputs to add asymptotically stable nonlinear zeros to the system in a manner that allows the new composite zero dynamics to be asymptotically stable on arbitrarily large compact sets.     

Adaptive dynamic surface control for uncertain nonaffine nonlinear systems

This paper focuses on the problem of adaptive control for uncertain nonaffine nonlinear systems. The original nonaffine systems are transformed into the augmented affine systems via adding an auxiliary integrator, which makes the explicit control design possible. By introducing a modified sliding mode filter in each step, a novel adaptive dynamic surface controller is proposed, where the ‘explosion of complexity’ problem inherent in the backstepping design is avoided. It is proven rigorously that for any initial control condition, the proposed adaptive scheme is able to ensure the semiglobal uniformly ultimately boundedness of all signals in the closed loop. An illustrative example is carried out to verify the effectiveness of the proposed approach. Copyright © 2016 John Wiley & Sons, Ltd.     

Robust nonlinear variable selective control for networked systems

This paper is concerned with the networked control of a class of uncertain nonlinear systems. In this way, Takagi–Sugeno (T-S) fuzzy modelling is used to extend the previously proposed variable selective control (VSC) methodology to nonlinear systems. This extension is based upon the decomposition of the nonlinear system to a set of fuzzy-blended locally linearised subsystems and further application of the VSC methodology to each subsystem. To increase the applicability of the T-S approach for uncertain nonlinear networked control systems, this study considers the asynchronous premise variables in the plant and the controller, and then introduces a robust stability analysis and control synthesis. The resulting optimal switching-fuzzy controller provides a minimum guaranteed cost on an H₂ performance index. Simulation studies on three nonlinear benchmark problems demonstrate the effectiveness of the proposed method.     

A new approach to fuzzy modeling and control for nonlinear dynamic systems: Neuro-fuzzy dynamic characteristic modeling and adaptive control mechanism

The study on nonlinear control system has received great interest from the international research field of automatic engineering. There are currently some alternative and complementary methods used to predict the behavior of nonlinear systems and design nonlinear control systems. Among them, characteristic modeling (CM) and fuzzy dynamic modeling are two effective methods. However, there are also some deficiencies in dealing with complex nonlinear system. In order to overcome the deficiencies, a novel intelligent modeling method is proposed by combining fuzzy dynamic modeling and characteristic modeling methods. Meanwhile, the proposed method also introduces the low-level learning power of neural network into the fuzzy logic system to implement parameters identification. This novel method is called neuro-fuzzy dynamic characteristic modeling (NFDCM). The neuro-fuzzy dynamic characteristic model based overall fuzzy control law is also discussed. Meanwhile the local adaptive controller is designed through the golden section adaptive control law and feedforward control law. In addition, the stability condition for the proposed closed-loop control system is briefly analyzed. The proposed approach has been shown to be effective via an example. Recommended by Editor Young-Hoon Joo. This work was jointly supported by National Natural Science Foundation of China under Grant 60604010, 90716021, and 90405017 and Foundation of National Laboratory of Space Intelligent Control of China under Grant SIC07010202. Xiong Luo received the Ph.D. degree from Central South University, Changsha, China, in 2004. From 2005 to 2006, he was a Postdoctoral Fellow in the Department of Computer Science and Technology at Tsinghua University. He currently works as an Associate Professor in the Department of Computer Science and Technology, University of Science and Technology Beijing. His research interests include intelligent control for spacecraft, intelligent optimization algorithms, and intelligent robot system. Zengqi Sun received the bachelor degree from Tsinghua University, Beijing, China, in 1966, and the Ph.D. degree from Chalmers University of the Technology, Gothenburg, Sweden, in 1981. He currently works as a Professor in the Department of Computer Science and Technology, Tsinghua University. His research interests include intelligent control of robotics, fuzzy neural networks, and intelligent flight control. Fuchun Sun received the Ph.D. degree from Tsinghua University, Beijing, China, in 1998. From 1998 to 2000, he was a Postdoctoral Fellow in the Department of Automation at Tsinghua University, where he is currently a Professor in the Department of Computer Science and Technology. His research interests include neural-fuzzy systems, variable structure control, networked control systems, and robotics.     

Adaptive identification and control algorithms for nonlinear bacterial growth systems

This paper suggests how nonlinear adaptive control of nonlinear bacterial growth systems could be performed. The process is described by a time-varying nonlinear model obtained from material balance equations. Two different control problems are considered: substrate concentration control and production rate control. For each of these cases, an adaptive minimum variance control algorithm is proposed and its effectiveness is shown by simulation experiments. A theoretical proof of convergence of the substrate control algorithm is given. A further advantage of the nonlinear approach of this paper is that the identified parameters (namely the growth rate and a yield coefficient) have a clear physical meaning and can give, in real time, a useful information on the state of the biomass.     

非线性系统近似最优PD动态补偿控制

本文研究了一类基于动态补偿的非线性系统的近似最优PD控制的问题.用微分方程的逐次逼近理论将非线性系统的最优控制问题转化为求解线性非齐次两点边值序列问题,并提供了从时域最优状态反馈到频域最优PD控制器参数的优化方法,从而获取系统最优的动态补偿网络,设计出最优PD整定参数,给出其实现算法.最后仿真示例将所提出的方法与传统的线性二次型调节器（LQR）逐次逼近方法相比较,表明该方法具有良好的动态性能和鲁棒性.     

Nonlinear predictive control of smooth nonlinear systems based on Volterra models. Application to a pilot plant

There is a large demand to apply nonlinear algorithms to control nonlinear systems. With algorithms considering the process nonlinearities, better control performance is expected in the whole operating range than with linear control algorithms. Three predictive control algorithms based on a Volterra model are considered. The iterative predictive control algorithm to solve the complete nonlinear problem uses the non‐autoregressive Volterra model calculated from the identified autoregressive Volterra model. Two algorithms for a reduced nonlinear optimization problem are considered for the unconstrained case, where an analytic control expression can be given. The performance of the three algorithms is analyzed and compared for reference signal tracking and disturbance rejection. The algorithms are applied and compared in simulation to control a Wiener model, and are used for real‐time control of a chemical pilot plant. Copyright © 2009 John Wiley & Sons, Ltd.     

Neuro-fuzzy identification applied to fault detection in nonlinear systems

This article describes a fault detection method, based on the parity equations approach, to be applied to nonlinear systems. The input–output nonlinear model of the plant, used in the method, has been obtained by a neural fuzzy inference architecture and its learning algorithm. The proposed method is able to detect small abrupt faults, even in systems with unknown nonlinearities. This method has been applied to a real industrial pilot plant, and good performance has been obtained for the experimental case of fault detection in the level sensor of a level control process in the said industrial pilot plant.     

Adaptive fuzzy dynamic surface control for uncertain nonlinear systems

In this paper, a robust adaptive fuzzy dynamic surface control for a class of uncertain nonlinear systems is proposed. A novel adaptive fuzzy dynamic surface model is built to approximate the uncertain nonlinear functions by only one fuzzy logic system. The approximation capability of this model is proved and the model is implemented to solve the problem that too many approximators are used in the controller design of uncertain nonlinear systems. The shortage of ＂explosion of complexity＂ in backstepping design procedure is overcome by using the proposed dynamic surface control method. It is proved by constructing appropriate Lyapunov candidates that all signals of closed-loop systems are semi-globally uniformly ultimate bounded. Also, this novel controller stabilizes the states of uncertain nonlinear systems faster than the adaptive sliding mode controller （SMC）. Two simulation examples are provided to illustrate the effectiveness of the control approach proposed in this paper.     

Adaptive output feedback control of uncertain nonlinear systems based on dynamic surface control technique

An adaptive output feedback control approach is studied for a class of uncertain nonlinear systems in the parametric output feedback form. Unlike the previous works on the adaptive output feedback control, the problem of ‘explosion of complexity’ of the controller in the conventional backstepping design is overcome in this paper by introducing the dynamic surface control (DSC) technique. In the previous schemes for the DSC technique, the time derivative for the virtual controllers is assumed to be bounded. In this paper, this assumption is removed. It can be proven that the resulting closed‐loop system is stable in the sense that all the signals are semi‐global uniformly ultimately bounded and the system output tracks the reference signal to a bounded compact set. A simulation example is given to verify the effectiveness of the proposed approach. Copyright © 2011 John Wiley & Sons, Ltd.     

Optimal decentralized control of dynamic systems

In this paper, several aspects of decentralized control theory applied to dynamic systems are studied. First of all, some classical definitions about matricial functions and new results on gradient calculations are presented. In the following we generalize to matricial problems the method of gradient projection of Rosen. Finally, some aspects of stability, initialization and initial condition independence are studied in detail, and two numerical examples are considered in order to emphasize the advantages of the given procedure: the decentralized Kalman filter and the optimal power-frequency control.     

Composite antidisturbance control for nonlinear systems via nonlinear disturbance observer and dissipative control

This paper investigates the design problem of composite antidisturbance control for a class of nonlinear systems with multiple disturbances. First, a novel nonlinear disturbance observer‐based control scheme is constructed to estimate and compensate the disturbance modeled by the nonlinear exosystem. Then, by combining the dissipative control theory, a linear matrix inequality‐based design method of composite antidisturbance control is developed such that the augmented system is exponentially stable in the absence of unmodeled disturbances, and is dissipative in the presence of unmodeled disturbances. In this case, the original closed‐loop system is exponentially stable in the presence of modeled disturbances. Subsequently, two special cases of composite antidisturbance control are derived with H_∞ performance and passivity, respectively. Finally, the proposed method is applied to control A4D aircraft to show its effectiveness.     

Online optimal control of nonlinear discrete-time systems using approximate dynamic programming

In this paper,the optimal control of a class of general affine nonlinear discrete-time(DT) systems is undertaken by solving the Hamilton Jacobi-Bellman(HJB) equation online and forward in time.The proposed approach,referred normally as adaptive or approximate dynamic programming(ADP),uses online approximators(OLAs) to solve the infinite horizon optimal regulation and tracking control problems for affine nonlinear DT systems in the presence of unknown internal dynamics.Both the regulation and tracking contro...     

Adaptive neural network dynamic surface control for perturbed nonlinear time-delay systems

This paper proposes an adaptive neural network control method for a class of perturbed strict-feedback nonlinear systems with unknown time delays. Radial basis function neural networks are used to approximate unknown intermediate control signals. By constructing appropriate Lyapunov-Krasovskii functionals, the unknown time delay terms have been compensated. Dynamic surface control technique is used to overcome the problem of "explosion of complexity" in backstepping design procedure. In addition, the semiglobal uniform ultimate boundedness of all the signals in the closed-loop system is proved. A main advantage of the proposed controller is that both problems of "curse of dimensionality" and "explosion of complexity" are avoided simultaneously. Finally, simulation results are presented to demonstrate the effectiveness of the approach.     

Digital self-triggered robust control of nonlinear systems

In this paper, we develop novel results on self-triggered control of nonlinear systems, subject to perturbations, and sensing/computation/actuation delays. First, considering an unperturbed nonlinear system with bounded delays, we provide conditions that guarantee the existence of a self-triggered control strategy stabilizing the closed-loop system. Then, considering parameter uncertainties, disturbances and bounded delays, we provide conditions guaranteeing the existence of a self-triggered strategy that keeps the state arbitrarily close to the equilibrium point. In both cases, we provide a methodology for the computation of the next execution time. We show on an example the relevant benefits obtained with this approach in terms of energy consumption with respect to control algorithms based on a constant sampling with a sensible reduction of the average sampling time.     

一类高次随机非线性系统的自适应动态面控制

针对一类含非线性参数高次随机非线性系统的输出跟踪控制问题,基于自适应增加幂次积分方法,利用参数分离技术和动态面技术,给出了一种自适应光滑状态反馈控制器设计方法。利用Sigmoid函数设计参数自适应律,保证了其导数连续。将低通滤波器引入控制器设计过程,避免了“微分爆炸”现象。通过构造适当形式的控制Lyapunov函数进行稳定性分析,证明了系统输出能被依概率地调节至参考信号的邻域范围。仿真结果验证了所提控制器设计方案的有效性。     

Adaptive tracking control of nonlinear systems with dynamic uncertainties using neural network

In this paper, an adaptive neural tracking control approach is proposed for a class of nonlinear systems with dynamic uncertainties. The radial basis function neural networks (RBFNNs) are used to estimate the unknown nonlinear uncertainties, and then a novel adaptive neural scheme is developed, via backstepping technique. In the controller design, instead of using RBFNN to approximate each unknown function, we lump all unknown functions into a suitable unknown function that is approximated by only a RBFNN in each step of the backstepping. It is shown that the designed controller can guarantee that all signals in the closed-loop system are semi-globally bounded and the tracking error finally converges to a small domain around the origin. Two examples are given to demonstrate the effectiveness of the proposed control scheme.