Geothermal district heating for reno, Nevada, U.S.A.

The City of Reno is one of the most obvious candidates for geothermal district heating in the United States. Lying within a helt of major thermal anomalies, it has within its boundaries the Moana Hot Springs geothermal reservoir and probably other reservoirs, and only 14 km to the south is the major reservoir at Steamboat Hot Springs.This paper discusses the alternative heat sources that can be used, and selects Steamboat as the most conservative choice for a “worst-case” analysis of the details and economics of a model district heating system. A closed 16 km transmission loop between Steamboat and downtown Reno is envisaged, carrying 121°C water in the supply line and 65°C in the return line. This loop is isolated by heat exchangers from both the 176°C geothermal fluids at the Steamboat end of the line, and from the Reno user systems at the other. Detailed analysis of thermal demand densities in different parts of the City led to a model distribution network 48 km long, that serves the optimum grouping of zones of concentrated heat users. A large proportion of existing heating systems are hydronic and retrofitting of the selected buildings to the district heating system is relatively straightforward. Total peak load for the proposed system is 138 MJ s⁻¹ (139 MW_t) and annual consumption is 1.1 × 10¹⁵ J. Capital costs total about $55.4 million, in 1981 dollars. The economic analysis shows this system could provide considerable savings relative to the cost of natural gas, if revenue bond financing at 13% is employed for the construction and startup of the system. Even more favorable economic results could be achieved if a geothermal resource could be developed closer to downtown Reno, eliminating the high cost of the 16 km transmission pipeline. Reducing the service area to the most concentrated area of heat use in downtown Reno produces an even more viable system, about half the size of the full system.