Synthesis of elastin‐based polymer and evaluation of its intermolecular interactions with hydroxypropyl methylcellulose

The parent repeating sequence of elastin, poly(GVGVP), was synthesized using solution phase method and characterized by ¹³C‐ and ¹H‐NMR spectroscopy. In order to study the polymer–polymer interactions between poly(GVGVP) and hydroxyl propyl methyl cellulose (HPMC), the blends were prepared both in aqueous and solid phase and examined using various analytical techniques. The viscometric measurements have been carried out at 24 °C and the interaction parameters such as α, β, µ, and Δ[η]_m revealed the miscible nature of the poly(GVGVP)/HPMC blend systems. In addition, Fourier‐transform infrared spectroscopy showed the formation of strong intermolecular hydrogen bond between poly(GVGVP) and HPMC networks. This result was further supported by glass transition temperature (T_g), scanning electron microscopic, and X‐ray diffraction studies. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 45283.     

Miscibility and phase structure of binary blends of polylactide and poly(vinylpyrrolidone)

The miscibility, crystallization behavior, and component interactions of two binary blends, poly(L ‐lactide) (L ‐PLA)/poly(vinylpyrrolidone) (PVP) and poly(D ,L ‐lactide) (DL ‐PLA)/PVP, were studied with differential scanning calorimetry and Fourier transform infrared (FTIR) spectroscopy. The composition‐dependent changes of the glass‐transition temperature (T_g) and degree of crystallinity (X_c) of the L ‐PLA phase indicated that L ‐PLA and PVP were immiscible over the composition range investigated. However, the sharp decrease of X_c with increasing PVP content in the second heating run demonstrated that the cold crystallization process of L ‐PLA was remarkably restricted by PVP. In DL ‐PLA/PVP blends, the existence of two series of isolated T_g's indicated that DL ‐PLA and PVP were phase‐separated, but evidence showed that there was some degree of interaction at the interface of the two phase, especially for the blends with low DL ‐PLA contents. FTIR measurements showed that there was no appreciable change in the spectra of L ‐PLA/PVP with respect to the coaddition of each component spectrum, implying the immiscibility of the two polymers. In contrast to L ‐PLA, the intermolecular interaction between DL ‐PLA and PVP was detected by FTIR; this was evidenced by the observation of a high‐frequency shift of the C?O stretching vibration band of PVP with increasing DL ‐PLA content, which suggested some degree of miscibility. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 973–979, 2003     

Investigation on crystallization behavior and hydrophilicity of poly(vinylidene fluoride)/poly(methyl methacrylate)/poly(vinyl pyrrolidone) ternary blends by solution casting

Ternary blends composed of matrix polymer poly(vinylidene fluoride) (PVDF) with different proportions of poly(methyl methacrylate) (PMMA)/poly(vinyl pyrrolidone) (PVP) blends were prepared by solution casting. The crystallization behavior and hydrophilicity of ternary blends were characterized by scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), wide angle X‐ray diffraction (WAXD), differential scanning calorimetry (DSC), and contact angle test. According to morphological analysis, the surface was full of typical spherulitic structure of PVDF and the average diameter was in the order of 3 μm. The samples presented predominantly β phase of PVDF by solution casting. It indicated that the size of surface spherulites and crystalline phase had little change with the PMMA or PVP addition. Moreover, FTIR demonstrated special interactions among the ternary polymers, which led to the shift of the carbonyl stretching absorption band of PVP. On the other hand, the melting, crystallization temperature, and crystallinity of the blends had a little change compared with the neat PVDF in the first heating process. Except for the content of PVP containing 30 wt %, the crystallinity of PVDF decreased remarkably from 64% to 33% and the value of t_1/2 was not obtained. Besides, the hydrophilicity of PVDF was remarkably improved by blending with PMMA/PVP, especially when the content of PVP reached 30 wt %, the water contact angle displayed the lowest value which decreased from 98.8° to 51.0°. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Morphology,drug release behavior,thermal, and mechanical properties of poly(ethylene oxide) (PEO)/poly(vinyl pyrrolidone) (PVP) blends

Poly(ethylene oxide) (PEO)/poly(vinyl pyrrolidone) (PVP) blends containing different amounts of PVP (0, 10, 25, 50, and 100 wt %) prepared by a solution casting method were characterized in terms of microstructure, thermal, and mechanical properties along with their drug release behavior. Fourier‐transform infrared spectroscopy results confirmed formation of hydrogen bonds between PEO and PVP. Although scanning electron microscopy micrographs showed no phase separation in the blends, the elemental analysis data obtained by energy dispersive X‐ray technique revealed partial miscibility between the blend components. The miscibility of the blend and degree of crystallinity of PEO component of the blend were decreased with increasing PVP content of the blend. The nucleating role of PVP in crystallization of PEO was confirmed by differential scanning calorimetry analysis. A synergistic effect on mechanical properties was obtained as a result of blending PVP with PEO. The results of curcumin release studies from the films indicated that, the blends have lower diffusion coefficients and slower drug release rate as compared to the neat PEO. Theoretical analysis of the drug release data using Peppas's model revealed that the kinetic of drug release from all the films is governed by a non‐Fickian diffusion mechanism. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46403.     

Study on the thermal behaviors and the morphology in PVP and nylon 6 blends

In this report, polyamides were solution blended in the formic acid with poly(vinyl pyrrolidone)(PVP), an amorphous polar polyamide. The thermal behaviors and morphological change in the blends of Nylon 6 (PA6) and PVP were investigated in details via WAXD, DSC, FT‐IR and POM methods. The equilibrium melting temperatures for PA6 in the blends were estimated based on the linear and nonlinear Hoffman‐Weeks (LHW and NLHW) extrapolative methods. With increasing the mass ratio of PVP to PA6, T_m (melting temperature) and T_c (crystallization temperature) of PA6 in blends both decreased as well as that of the spherulite size of PA6. The interaction mode between PVP and PA6 was investigated by FT‐IR spectroscopy, and the spectral changes indicated that the carbonyl groups of PVP had formed hydrogen bonding with the N? H groups of PA6 molecules in the molten state, which resulted in the variation of the morphology and thermal behaviors. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Crystallization behavior and hydrophilicity of poly(vinylidene fluoride)/poly(methyl methacrylate)/poly(vinyl pyrrolidone) ternary blends

Ternary blends composed of matrix polymer poly(vinylidene fluoride) (PVDF) with different proportions of poly(methyl methacrylate) (PMMA)/poly(vinyl pyrrolidone) (PVP) blends were prepared by melt mixing. The miscibility, crystallization behavior, mechanical properties and hydrophilicity of the ternary blends have been investigated. The high compatibility of PVDF/PMMA/PVP ternary blends is induced by strong interactions between the carbonyl groups of the PMMA/PVP blend and the CF₂ or CH₂ group of PVDF. According to the Fourier transform infrared and wide‐angle X‐ray difffraction analyses, the introduction of PMMA does not change the crystalline state (i.e. α phase) of PVDF. By contrast, the addition of PVP in the blends favors the transformation of the crystalline state of PVDF from non‐polar α to polar β phase. Moreover, the crystallinity of the PVDF/PMMA/PVP ternary blends also decreases compared with neat PVDF. Through mechanical analysis, the elongation at break of the blends significantly increases to more than six times that of neat PVDF. This confirms that the addition of the PMMA/PVP blend enhances the toughness of PVDF. Besides, the hydrophilicity of PVDF is remarkably improved by blending with PMMA/PVP; in particular when the content of PVP reaches 30 wt%, the water contact angle displays its lowest value which decreased from 91.4° to 51.0°. Copyright © 2011 Society of Chemical Industry     

Specific interactions in 4‐hydroxybenzoic acid/poly(2‐vinylpyridine)/poly(N‐vinyl‐2‐pyrrolidone) blends

The specific interactions in ternary 4‐hydroxybenzoic acid (HBA)/poly(2‐vinylpyridine) (P2VPy)/poly(N‐vinyl‐2‐pyrrolidone) (PVP) blends were studied by differential scanning calorimetry, Fourier transform infrared (FTIR) spectroscopy, and electron microscopy. FTIR study shows the existence of hydrogen‐bonding interactions between HBA and P2VPy as well as PVP. The addition of a sufficiently large amount of HBA produces a blend showing one glass‐transition temperature (T_g). Microscopic study shows a drastic reduction in domain size in single‐T_g blends. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 81: 901–907, 2001     

Miscibility enhancement on the immiscible poly (vinyl pyrrolidone) and poly (ethyl methacrylate) with poly (vinyl phenol)

The miscibility behavior of ternary blends of poly (vinyl phenol) (PVPh)/poly (vinyl pyrrolidone) (PVP)/poly (ethyl methacrylate) (PEMA) was investigated mainly with calorimetry. PVPh is miscible with both PVP and PEMA on the basis of the single T_g observed over the entire composition range. FTIR was used to study the hydrogen bonding interaction between the hydroxyl group of PVPh and the carbonyl group of PVP and PEMA at various compositions. Furthermore, the addition of PVPh is able to enhance the miscibility of the immiscible PVP/PEMA and eventually transforms it into a miscible blend, especially when the ratio between PVP/PEMA is 3:1, probably because of favorable physical interaction. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 1205–1213, 2006     

Investigation on miscibility behaviors of elastin‐like polypentapeptide blends with polyvinyl alcohol in aqueous and solid state

The polypentapeptide of elastin, poly(GVGVP) has shown remarkable properties and have great potential for biomedical applications. To explore its applications further, the miscibility behaviors of poly(vinyl alcohol) (PVA)/poly(GVGVP) blends have been explored in a very broad composition range. The miscibility behaviors of these blends have been investigated in both solution and solid state using various analytical techniques, including ultrasonic velocity, density, refractive index (RI) and viscosity techniques at 25 °C. The results confirmed the miscibility of the blend up to 40% of the polypeptide. This was further supported by Fourier transform infrared (FTIR) spectroscopy, differential scanning calorimetry (DSC) and scanning electron microscopy (SEM). © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44624.     

Novel biodegradable amphiphilic poly(ε‐caprolactone)/poly(N‐vinylpyrrolidone) blends via successive in situ polymerizations

In this study, biodegradable blends of poly(ε‐caprolactone) (PCL) and poly(N‐vinylpyrrolidone) (PVP) were prepared by a new strategy in the following steps: (1) free radical polymerization of N‐vinyl‐2‐pyrrolidone (NVP) in ε‐caprolactone (CL); (2) ring‐opening polymerization of ε‐caprolactone in the presence of PVP to obtain the target blends. The structure of the blends was confirmed by FTIR and ¹H NMR, and the molecular weight of PCL and PVP were determined by GPC. SEM study revealed that this polymerization method could decrease the disperse phase size and improve the interphase when compared with solution‐blending method. The phase inversion occurred when PVP content was 15–20 wt %. Subsequently, the PCL sphere dispersed in PVP matrix and its size decreased with the increase of PVP content. The contact angle results showed that PVP has a profound effect on hydrophilic properties of PCL/PVP blends. PCL/PVP blends are believed to be promising for drug delivery, cell therapy, and other biomedical applications. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Super‐tough biodegradable poly(vinyl alcohol)/poly(vinyl pyrrolidone) blends plasticized by glycerol and sorbitol

Tough biodegradable films were prepared using a poly(vinyl alcohol) (PVA)/poly(vinyl pyrrolidone) (PVP) (1:1) blend with plasticizers of glycerol (GLY), sorbitol (SOR), and their (one to one) mixture. We studied the effect of plasticization on the structural, thermal, and mechanical properties of the PVA/PVP blend films. Fourier transform infrared spectra indicated good miscibility of the two components due to the H‐bonding between the PVA and PVP molecules. The addition of plasticizers reduced the interaction between PVA and PVP, evidenced by an increase in the intensity of PVA diffraction peaks observed in the X‐ray diffraction (XRD) characterization. Thermal degradation of the blends increased as a function of the plasticizer used. GLY affected thermal degradation more than SOR and the mixtures. The incorporation of the plasticizers promoted the growth of PVA crystals as evidenced by XRD patterns and the enthalpy of fusion (ΔH_f) obtained by differential scanning calorimetry measurements. The introduction of SOR to the binary blend increased toughness seven times and imparted simultaneous and pronounced improvements to maximum tensile stress and elongation at break. This behavior holds out great promise for the development of a new generation of mechanically robust, yet thoroughly biodegradable materials that could effectively supplant conventional polymers in demanding applications. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46406.     

Competitive hydrogen bonding mechanisms underlying phase behavior of triple poly(N‐vinyl pyrrolidone)–poly(ethylene glycol)–poly(methacrylic acid‐co‐ethylacrylate) blends

Differential scanning calorimetry (DSC) of triple blends of high molecular weight poly(N‐vinyl pyrrolidone) (PVP) with oligomeric poly(ethylene glycol) (PEG) of molecular weight 400 g/mol and copolymer of methacrylic acid with ethylacrylate (PMAA‐co‐EA) demonstrates partial miscibility of polymer components, which is due to formation of interpolymer hydrogen bonds (reversible crosslinking). Because both PVP and PMAA‐co‐EA are amorphous polymers and PEG exhibits crystalline phase, the DSC examination is informative on the phase state of PEG in the triple blends and reveals a strong competition between PEG and PMAA‐co‐EA for interaction with PVP. The hydrogen bonding in the triple PVP–PEG–PMAA‐co‐EA blends has been established with FTIR Spectroscopy. To evaluate the relative strengths of hydrogen bonded complexes in PVP–PEG–PMAA‐co‐EA blends, quantum‐chemical calculations were performed. According to this analysis, the energy of H‐bonding has been found to diminish in the order: PVP–PMAA‐co‐EA–PEG(OH) > PVP–(OH)PEG(OH)–PVP > PVP–H₂O > PVP–PEG(OH) > PMAA‐co‐EA–PEG(? O? ) > PVP–PMAA‐co‐EA > PMAA‐co‐EA–PEG(OH). Thus, most stable complexes are the triple PVP–PMAA‐co‐EA–PEG(OH) complex and the complex wherein comparatively short PEG chains form simultaneously two hydrogen bonds to PVP carbonyl groups through both terminal OH‐groups, acting as H‐bonding crosslinks between longer PVP backbones. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Stabilization of CO2‐in‐water emulsions with high internal phase volume using PVAc‐b‐PVP and PVP‐b‐PVAc‐b‐PVP as emulsifying agents

Two newly‐designed hydrocarbon surfactants, that is, poly(vinyl acetate)‐block‐poly(1‐vinyl‐2‐pyrrolidone) (PVAc‐b‐PVP) and PVP‐b‐PVAc‐b‐PVP, were synthesized using reversible addition–fragmentation chain transfer polymerization and used to form CO₂/water (C/W) emulsions with high internal phase volume and good stability against flocculation and coalescence up to 60 h. Their structures were precisely determined by nuclear magnetic resonance, gel permeation chromatography, thermal gravimetric analysis, and differential scanning calorimetry. Besides low temperature and high CO₂ pressure, the surfactant structures were the key factors affecting the formation and stability of high internal phase C/W emulsions, including the polymerization degrees of CO₂‐philic block (PVAc) and hydrophilic block (PVP), as well as the number of hydrophilic tail. The surface tension of the surfactant aqueous solution and the apparent viscosity of the C/W emulsions were also measured to characterize the surfactants efficiency and effectiveness. The surfactants with double hydrophilic tails showed stronger emulsifying ability than those with single hydrophilic tail. The great enhancement of the emulsions stability was due to decrease of the interface tension as well as increase of the steric hindrance in the water lamellae, preventing a frequent collision of CO₂ droplets and their fast coalescence. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46351.     

Preparation of microporous chlorinated poly(vinyl chloride) membrane in fabric and the characterization of their pore sizes and pore‐size distributions

Chlorinated poly(vinyl chloride) (CPVC)/poly(vinyl pyrrolidone) (PVP) membranes were prepared by using the solvent system tetrahydrofuran (THF)/n‐butyl alcohol (n‐BA) to investigate the possibility of pore size and pore‐size distribution control. The coagulation of CPVC/PVP solution was induced by the exposure to water vapor at 25 (±0.5)°C. The average pore diameter, d_p, and the size distribution of pores on the surface of the membrane were quantified through the image analyzer from the images visualized by field emission scanning electron microscope (FE‐SEM). Surface pore size and distribution of the prepared CPVC/PVP membrane were strongly affected by the relative humidity (RH) in the environment and the content of PVP used as an additive. Particularly, in the case of CPVC membrane without PVP, the mean pore size was 0.15–0.2 μm, depending on the RH. The pore distribution became broad with the increase of the RH. The membranes had open pores as confirmed by the hydraulic permeation experiment. In addition, the water flux and membrane resistance (R_m) were greatly affected by the composition of polymer solution and the RH. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 1195–1202, 2002     

Functionalization of lignin: Synthesis of lignophenol‐graft‐poly(2‐ethyl‐2‐oxazoline) and its application to polymer blends with commodity polymers

Lignophenol (LP)‐graft‐poly(2‐ethyl‐2‐oxazoline) (POZO) was prepared to reuse lignin, an industrial waste material, and to produce novel LP‐based polymer blends with poly(vinyl chloride) (PVC), poly(bisphenol A carbonate) (PC), polyvinylpyrrolidone (PVP), and polystyrene (PSt) as commodity polymers. The resulting graft polymer was soluble in various types of organic solvents such as chloroform, THF, acetone, and methanol, unlike LP. The miscibility of LP‐graft‐POZO with commodity polymers was measured by differential scanning calorimetry (DSC) to determine the glass transition temperatures (T_g). In the cases of the blends of LP‐graft‐POZO with PVC, PC, and PVP, the T_g values decreased during the second scan. Moreover, in the cases of the blends with PVC and PVP, the T_g values were not detected during the third scan. Therefore, it was inferred that LP‐graft‐POZO was miscible with PVC, PC, and PVP while forming single phases; in particular, the blends of LP‐graft‐POZO with PVC and PVP exhibited a secondary miscibility because the T_g values were not detected. Furthermore, the blend of LP‐graft‐POZO with PC exhibited better thermostability than LP and LP‐graft‐POZO. These results indicated that LP blended with POZO could be used as a polymer additive and as an adhesive to combine different polymers, organic–inorganic polymers, etc. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Morphology enhancement of TiO2/PVP composite nanofibers based on solution viscosity and processing parameters of electrospinning method

In this work, different sol solutions with various titanium tetraisopropoxide (TIP)/glacial acetic acid ratios in 2‐propanol with 5 wt % poly(vinyl pyrrolidone) (PVP) (M_w = 360,000 g/mol) were prepared and electrospun. Composition of the prepared sols and as‐spun TiO₂/PVP nanofibers were determined by Fourier transform infrared and Raman spectroscopy methods. Morphology of the electrospun TiO₂/PVP nanofibers was studied by scanning electron microscopy and transmission electron microscopy (TEM) techniques. Rheometry measurements of the sol solutions showed decrease of viscosity upon the addition of TIP to the polymer solutions with constant polymer and acid concentrations. The sol solution having the lowest viscosity (at shear rate 10 s^?1) but the highest TIP/glacial acetic acid ratio showed beaded nanofibers morphology when electrospun under 10 and 12 kV applied voltage while injection rate, needle tip to collector distance, and needle gauge were kept constant. However, smooth electrospun TiO₂/PVP composite nanofibers with the average nanofibers diameters (148 ± 79 nm) were achieved under the same condition when applied voltage increased to 15 kV. TEM micrographs of the electrospun TiO₂/PVP nanofiber showed that the TiO₂ particles with continuous structure are formed at the middle of the nanofiber and distributed along its axis. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46337.     

Influence of Syzygium cumini leaves extract on morphological,thermal, mechanical,and antimicrobial properties of PVA and PVA/chitosan blend films

In the present work, poly(vinyl alcohol)/Syzygium cumini leaves extract (PSN) and poly(vinyl alcohol)/chitosan/S. cumini leaves extract blend films were prepared by solution casting technique. The films were characterized by using scanning electron microscopy, atomic force microscopy, X‐ray diffraction study, Fourier transform infrared spectroscopy, thermogravimetric analysis, and universal testing machine. The results indicated that the appreciable physical interaction at lower concentrations of S. cumini leaves extract in the PVA and PVA/chitosan films contribute to the smooth uniform morphology, increased the degree of crystallinity, degradation temperature, and improved mechanical properties. Further, films were analyzed with water contact angle analyzer which illustrates that blend films were hydrophilic (PSN‐1) and hydrophobic (PCS‐1) in nature. However, blend films were also subjected to the antimicrobial study, which revealed that inclusion of S. cumini leaves extracts significantly enhanced the antibacterial activity in the PVA and PVA/chitosan film. With all of these results, fabricated blends can find potential applications in packaging material to extend the shelf life of foodstuffs. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46188.     

Miscibility windows in ternary polymer blends of a polyester,polymethacrylate and poly(styrene‐co‐acrylonitrile)

Miscibility, phase diagrams and morphology of poly(ε‐caprolactone) (PCL)/poly(benzyl methacrylate) (PBzMA)/poly(styrene‐co‐acrylonitrile) (SAN) ternary blends were investigated by differential scanning calorimetry (DSC), optical microscopy (OM), and scanning electron microscopy (SEM). The miscibility window of PCL/PBzMA/SAN ternary blends is influenced by the acrylonitrile (AN) content in the SAN copolymers. At ambient temperature, the ternary polymer blend is completely miscible within a closed‐loop miscibility window. DSC showed only one glass transition temperature (T_g) for PCL/PBzMA/SAN‐17 and PCL/PBzMA/SAN‐25 ternary blends; furthermore, OM and SEM results showed that PCL/PBzMA/SAN‐17 and PCL/PBzMA/SAN‐25 were homogeneous for any composition of the ternary phase diagram. Hence, it demonstrated that miscibility exists for PCL/PBzMA/SAN‐17 and PCL/PBzMA/SAN‐25 ternary blends, but that the ternary system becomes phase‐separated outside these AN contents. Copyright © 2003 Society of Chemical Industry     

Fabrication of polypropylene blends with excellent low‐temperature toughness and balanced toughness‐rigidity by a combination of EPR and SEEPS

To overcome serious rigidity depression of rubber‐toughened plastics and fabricate a rigidity‐toughness balanced thermoplastic, a combination of styrene‐[ethylene‐(ethylene‐propylene)]‐styrene block copolymer (SEEPS) and ethylene‐propylene rubber (EPR) was used to toughen polypropylene. The dynamic mechanical properties, crystallization and melting behavior, and mechanical properties of polypropylene (PP)/EPR/SEEPS blends were studied in detail. The results show that the combination of SEEPS and EPR can achieve the tremendous improvement of low‐temperature toughness without significant strength and rigidity loss. Dynamic mechanical properties and phase morphology results demonstrate that there is a good interfacial strength and increased loss of compound rubber phase comprised of EPR component and EP domain of SEEPS. Compared with PP/EPR binary blends, although neither glass transition temperature (T_g) of the rubber phase nor T_g of PP matrix in PP/EPR/SEEPS blends decreases, the brittle‐tough transition temperature (T_bd) of PP/EPR/SEEPS blends decreases, indicating that the increased interfacial interaction between PP matrix and compound rubber phase is also an effective approach to decrease T_bd of the blends so as to improve low‐temperature toughness. The balance between rigidity and toughness of PP/EPR/SEEPS blends is ascribed to the synergistic effect of EPR and SEEPS on toughening PP. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 45714.     

Effects of molecular weight on phase structure of poly(ethylene terephthalate)/poly(ethylene 2,6‐naphthalate) blends

The phase structure of poly(ethylene terephthalate)/poly(ethylene 2,6‐naphthalate) (PET/PEN) blends was studied in relation to the molecular weight. The samples were prepared by both solution blends, which showed two glass‐transition temperatures (T_g), and melt blends (MQ), which showed a single T_g, depending on the composition of the blends. The T_g of the MQ series was independent of the molecular weight of the homopolymer, although the degree of transesterification in the blends was affected by the molecular weight. The MQ series showed two exotherms during the heating process of a differential scanning calorimetry scan. The peak temperature and the heat flow of the exotherms were affected by the molecular weight of the homopolymers. The strain‐induced crystallization of the MQ series suggested the independent crystallization of PET and PEN. Based on the results, a microdomain structure of each homopolymer was suggested. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 97: 2428–2438, 2005