Regimes of microstructural evolution as observed from rheology and surface morphology of crosslinked poly(vinyl alcohol) and hyaluronic acid blends during gelation

Hyaluronic acid (HA)‐based materials are being investigated because of their role in biological fluids and tissues. Poly(vinyl alcohol) (PVA) when blended with HA at different compositions leads to superior mechanical properties compared to pure HA. The PVAHA blend hydrogels are potential candidates for pharmaceutical, biomedical, and cosmetic applications. It is essential to understand the structure, gelation time, and morphological properties of these hydrogels. In this work, a blend system of PVA crosslinked with glutaraldehyde in the presence of HA is studied. Semidilute solutions of PVA and HA are blended, followed by gelation due to crosslinking. The crosslinked gels as well as the gel cast membranes were examined. The effect of HA on the gelation process is investigated using rheological characterization. It is shown that kinetics of gelation is influenced by HA content, though storage modulus of the gels is influenced marginally. The structural features of PVAHA gels were also probed with scanning electron microscopy and dynamic light scattering. It is argued that there is a complex interplay between intra‐ and intermolecular crosslinking of PVA and PVA–HA interactions during the gel formation. Based on the insights obtained from various probing techniques for PVAHA gels with different HA content, three broad structural features were identified. It is shown that the hydrogel is semi‐interpenetrating network at lower HA content (<10% HA), cocontinuous morphology at moderate HA content and with domains at high HA content (>20% HA). © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 41081.     

On the viscoelastic properties of poly(vinyl alcohol) and chemically crosslinked poly(vinyl alcohol)

Poly(vinyl alcohol)(PVA) films chemically crosslinked with glutaraldehyde(GA) in the presence of HCl were prepared by casting from aqueous solutions. The PVA and PVA gels were investigated by differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), and dynamic mechanical analysis (DMA); their swelling characteristics and tensile strength were also determined. The DSC results for the gels displayed depressions of the melting and crystallization temperatures, as well as a decrease of the heat of fusion, when compared to those of PVA free of crosslinker. The DMA analysis revealed that: (1) The glass transition temperature of the wet PVA was lower than that of the dry one, indicating that the water had a plasticizing effect. (2) The gels had a lower glass transition temperature than PVA. (3) The glass transition temperature of the wet gels increased with increasing crosslink density. Possible explanations are provided for these observations. Whereas the thermogravimetric curves of PVA exhibited a single degradation peak, two degradation peaks were detected for the crosslinked PVA. The wet PVA and PVA gels displayed lower tensile strengths and higher elongations than the dried ones. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 82: 1816–1823, 2001     

Characterization of strong polyelectrolyte hydrogels based on poly(vinyl alcohol)

Maleic anhydride (MA) was grafted onto both partially and fully hydrolyzed poly(vinyl alcohol) (PVA) in the presence of an initiator. Strong polyelectrolyte polymers were prepared by sulfonation of PVA–MA grafts. The sulfonation was completed by reaction of hydroxyl groups of PVA–MA grafts with two different sulfonating reagents (chlorosulfonic acid and pyridine sulfonic acid). The sulfonation degree was evaluated by acid–base titration and ¹H NMR analysis. The solution behaviour of the prepared grafts was evaluated from viscosity measurements. Four kinds of water‐insoluble PVA–MA and PVA–MA‐SO₃H hydrogels were prepared by heat treatment, physical gelation and chemical crosslinking with different weight ratios of N,N‐methylene bisacrylamide (MBA) crosslinker. The swelling parameters were measured for all prepared gels in deionized water and aqueous solutions at different pH values from 2 to 12 having constant ionic strength (I = 0.1). All gels exhibit a different swelling behaviour upon environmental pH changes. Copyright © 2004 Society of Chemical Industry     

Rheological and electrical properties of bentonite in anionic polystyrene sulfonate and nonionic poly(vinyl alcohol)

The flow properties of bentonite were studied with a combination of anionic polystyrene sulfonate (molecular weight = 70,000 g/mol) and nonionic poly(vinyl alcohol) (molecular weight = 50,000 g/mol). This combination had a significant effect on clay suspensions depending on the sequence of the polymer addition. The addition of 50 mg/L anionic polystyrene sulfonate followed by 200 mg/L nonionic poly(vinyl alcohol) improved the rheological properties with a 7% bentonite suspension, especially at 20°C and after 24 h of aging. However, by the reversal of this addition sequence, the rheological properties of bentonite suspensions were reduced. The ζ potential of bentonite suspensions of the individual polymers at the same concentration was ?42 mV for polystyrene sulfonate and ?63 mV for poly(vinyl alcohol). The combined effect of anionic polystyrene sulfonate followed by nonionic poly(vinyl alcohol) noticeably changed the ζ potential (?95 mV). With the reversal of the addition sequence, this parameter did not change. Potential energy profiles were constructed to investigate the suspension stability. Potential energy profiles of polystyrene sulfonate added to bentonite suspensions and followed by poly(vinyl alcohol) produced high repulsion potential energy between clay surfaces, reflecting high suspension stability. By the reversal of this sequence, a significant reduction of the energy barrier was observed. On the basis of the rheological and electrical properties of this system, the addition of polystyrene sulfonate followed by poly(vinyl alcohol) provides a promising tendency for a 7% clay concentration to meet desirable drilling mud properties. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 3886–3894, 2007     

Sticky poly(vinyl alcohol) hydrogels

Low-temperature gelation of poly(vinyl alcohol) (PVA) solution was performed in the presence of CaCl₂. The resulting PVA hydrogels showed high stickiness and excellent water-holding ability. These properties became more remarkable with increasing CaCl₂ concentration in solvent. Furthermore, both the peel strength on stainless steel and the degree of swelling of the PVA hydrogel drastically increased as CaCl₂ concentration was increased from 20 to 30 wt %. It is concluded that the sticky and water-holding properties of PVA hydrogels are intimately related to the state of hydration of Ca ions in aqueous environment. © 1993 John Wiley & Sons, Inc.     

Effect of montmorillonite on the rheological properties of dually crosslinked guar gum‐based hydrogels

One strategy to create chemical and physical cross‐links simultaneously is to introduce into the chemical network hydrogen bonding with clay nanofillers. Understanding the relaxation mechanisms of these systems is crucially important and has drawn the extensive interest of many scientists. In this work, the influence of different amounts of montmorillonite on the structural and rheological properties of guar gum hydrogels was investigated. Depending on the clay content, different nanostructures were identified by X‐ray diffraction (XRD) and their effect on the rheological properties of the dual hydrogels was studied. From stress and frequency sweep tests it emerged that all the samples exhibit a weak gel behavior and showed a maximum for G″ that can be ascribed to the breaking and reforming of transient physical crosslinks. This relaxation mode is more pronounced for the hydrogel for which a minimum in the swelling degree was observed. On the basis of these results, a model structure was proposed according to which the clay sheets act as effective multifunctional cross‐linkers. The more homogeneously dispersed are the clay platelets, the higher is the density of physical crosslinks. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41373.     

Preparation and characterization by radiation of poly(vinyl alcohol) and poly(N‐vinylpyrrolidone) hydrogels containing aloe vera

In these studies, hydrogels for wound dressings were made from a mixture of aloe vera and poly(vinyl alcohol) (PVA)/poly(N‐vinylpyrrolidone) (PVP) by freezing and thawing, γ‐Ray irradiation, or a two‐step process of freezing and thawing and γ‐ray irradiation. We examined the physical properties, including gelation, water absorptivity, gel strength, and degree of water evaporation, to evaluate the applicability of these hydrogels for wound dressings. The PVA:PVP ratio was 6:4, the dry weight of aloe vera was in the range 0.4–1.2 wt %, and the solid concentration of the PVA/PVP/aloe vera solution was 15 wt %. We used γ radiation doses of 25, 35, and 50 kGy to expose mixtures of PVA/PVP/aloe vera to evaluate the effect of radiation dose on the physical properties of the hydrogels. Gel content and gel strength increased as the concentration of aloe vera in the PVA/PVP/aloe vera gels decreased and as radiation dose increased and the number of freeze–thaw cycles was increased. The swelling degree was inversely proportional to the gel content and gel strength. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 1477–1485, 2003     

Structure and properties of porous poly(vinyl alcohol) hydrogel beads prepared through a physical–chemical crosslinking method

Porous poly(vinyl alcohol) (PVA) hydrogel beads (PC beads) are potential microorganism carriers applied in wastewater treatment industries. However, improving the mechanical strength and stability of traditional PVA hydrogel beads in water is still a challenge. In this research, a new kind of PC bead was successfully prepared by a combination of physical and chemical crosslinking methods. The structures and properties of the PC beads and conventional PVA beads obtained by individual chemical (boric acid) or physical (cyclic freezing and thawing) processes were investigated by Fourier transform infrared spectroscopy, differential scanning calorimetry, scanning electron microscopy, and tensile and hydraulic stability testing. Compared with the conventional products, the PC beads displayed a more homogeneous and porous structure, bigger surface area, higher hydraulic stability, and better mechanical properties and showed better applicability for the water treatment field. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46402.     

Influence of crosslinking methods toward poly(vinyl alcohol) properties: Microwave irradiation and conventional heating

In this study, crosslinking of poly(vinyl alcohol) (PVA) with tartaric acid, as crosslinker, is performed using microwave irradiation. A comparison between the properties of PVA crosslinked using microwave irradiation and conventional heating methods is also discussed. While the water absorption, tensile and thermal properties of PVA crosslinked by either of the methods are comparable, microwave irradiation took only one‐eighth (14 min) of the time compared to conventional heating. In comparison with PVA (42 MPa), the strength of PVA crosslinked with 35% TA increased to 145 and 153 MPa for conventional heating and microwave irradiation, respectively. Water absorption of crosslinked PVA film is successively reduced to less than 30% in comparison with PVA (～200%). Moreover, the crosslinked films are stable at higher temperatures in comparison with PVA. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46125.     

Crosslinking of poly(vinyl alcohol) and poly(vinyl acetate) using poly(maleic anhydride‐alt−2,4‐dimethyl‐1,3‐pentadiene) as polyfunctional crosslinker and decrosslinking by ozone degradation

Crosslinking and decrosslinking reactions of poly(vinyl alcohol) (PVA) and poly(vinyl acetate) (PVAc) using an alternating copolymer of maleic anhydride and 2,4‐dimethyl‐1,3‐pentadiene (PMAD) as the polyfunctional crosslinker and subsequent ozone degradation are reported. PVA and PVAc are heated at 200 °C for 0.5 to 3 h in the presence of 5 to 30 wt % of PMAD in the solid state to obtain the corresponding crosslinked polymers. The reactions of a hydroxy group of PVA and an acetate group of PVAc with an anhydride group of PMAD slowly proceed to give insoluble polymers with a loose crosslinking structure. Almost no change in the thermal decomposition temperatures and the IR spectra is observed during the crosslinking reactions. The crosslinked PVA produces hydrogels with a high swelling ratio of 500 to 1700%, which are readily degradable during a reaction with ozone in water at 0 °C. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44229.     

Effect of crosslinking on the mechanical and thermal properties of poly(vinyl alcohol)

Poly(vinyl alcohol) was crosslinked with hexamethylene diisocyanate in solution. A broad range of degrees of crosslinking, from 1.7 up to 74 mol% of reacted hydroxyl groups, was achieved. The variation of the thermal and mechanical properties of PVA with the crosslinking density show an initial decrease due to the diminution of the crystallinity of the system, caused by the crosslinking. After an abrupt rise at about 20%, the properties tend to level off independently on the increase of the crosslinking. This behaviour is explained as a result of the competitive action of at least three factors during the crosslinking: (i) weakening of the existing physical network due to hydrogen bonding; (ii) formation of a chemical network; and (iii) introduction of flexible moieties. The last factor is closely connected with the specific chemical structure of the crosslinker itself.     

Increasing the adsorption capacity and selectivity of poly(vinyl alcohol) hydrogels by an alternative imprinting technique

In this work, we report an innovative alternative imprinting method for obtaining chemically crosslinked poly(vinyl alcohol) hydrogels with β‐cyclodextrin as template. The materials present high affinity toward the template that imprinted them, revealed by the higher sorption yield of β‐cyclodextrin and higher selectivity factors of the imprinted material, by comparing with the nonimprinted reference. The imprinting kinetic and mechanism has been demonstrated by adsorption studies, binding isotherms and Scatchard analysis and is in good correlation with the information regarding the morphology of the materials, determined by fluorescence microscopy and atomic force microscopy. By using a novel fluorescence spectroscopy method of the starting polymer solution, the optimum amount of imprinting template could be determined. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42024.     

Characterization of associating hydrogels of poly(vinyl alcohol) and poly(vinyl pyrrolidone)

In this study, hydrogels were prepared from blends of poly(vinyl alcohol) (PVA) and poly(vinyl pyrrolidone) (PVP). The miscibility of the polymers was confirmed with differential scanning calorimetry with the appearance of a single glass‐transition temperature. Additionally, a negative Flory–Huggins interaction parameter further verified the interaction between PVA and PVP. We evaluated the stability of the hydrogels by swelling the gels in phosphate‐buffered saline solutions at pH 7.4. With attenuated total reflectance‐Fourier transform infrared spectroscopy, it was determined that, during swelling, PVP dissolved out of the gel over time and the equilibrium gel content of PVP was nearly identical in all of the samples investigated. After the dissolution of PVP, the equilibrium water content of the gels ranged from 64 to 76 wt %. Additionally, rubber elasticity studies were performed to elucidate information about the physically crosslinked network structure. As determined from rubber elasticity experiments, the mesh size of the physically crosslinked hydrogels ranged from 90 to 230 Å. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Carboxymethyl cellulose reinforced poly(vinyl alcohol) with trimethylol melamine as a chemical crosslinker

In this investigation, carboxymethyl cellulose (CMC)‐reinforced poly(vinyl alcohol) (PVA) were prepared with trimethylol melamine as a chemical crosslinker. The structure and property of hydrogels were measured by Fourier transform infrared (FTIR) spectroscopy, scanning electron microscopy (SEM), texture analysis, and rheometry. The FTIR spectra demonstrated that the etherification reaction successfully occurred in the PVA–CMC hydrogels, and the SEM figures exhibited the homogeneous porous structure of the CMC–PVA hydrogels. The compression strength of the PVA–CMC hydrogels was 15 times higher than that of the PVA hydrogels. Moreover, the PVA–CMC hydrogels exhibited a higher storage modulus than that of the PVA hydrogels; this illustrated better elasticity for the PVA–CMC hydrogels. As a result, CMC‐modified PVA hydrogels with high mechanical behavior will broaden the potential applications of hydrogels, such as in wound dressings, facial masks, and skin‐protection layers. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44590.     

Laboratory scale study on rheological behavior,morphological and structural properties of crosslinked polyacrylamide composite hydrogels embedded with date seed powder

Incorporation of biofillers in polymeric hydrogels has continued to receive great attention in recent times because of their excellent properties. In this study, polyacrylamide (PAM) and polyethyleneimine (PEI) were used to develop novel composite hydrogels filled with date seed powder (DSP) via chemical crosslinking technique. Pristine PAM/PEI hydrogel and PAM/PEI‐DSP hydrogels at various DSP loadings were fabricated and subjected to gelation at 40°C for 24 h. The impact of various DSP loadings on the hydrogel samples developed was investigated using hybrid rheometer, SEM, XRD, and FTIR instruments, respectively. Rheological measurements confirmed the viscoelastic responses of the neat PAM/PEI hydrogel and the PAM/PEI‐DSP hydrogels reinforced with various DSP contents (0.8, 2.4, and 4 wt %). The dynamic strain, dynamic frequency and time sweep tests demonstrated that PAM/PEI‐DSP hydrogels were slightly more elastic than the virgin PAM/PEI hydrogel. The SEM characterization revealed the surface micrographs of the neat PAM/PEI hydrogel and the PAM/PEI‐DSP hydrogels at different DSP loadings to be smooth, homogeneous, and dense. Besides, the SEM micrographs supported the incorporation of DSP in the PAM/PEI‐DSP hydrogel samples. XRD analysis showed that the structures of neat PAM/PEI hydrogel and PAM/PEI‐DSP hydrogels filled with various DSP contents were predominantly amorphous while FTIR results confirmed the functional groups and evidence of crosslinking in the neat PAM/PEI hydrogel and the PAM/PEI‐DSP hydrogels embedded with different DSP contents. It is believed that these new hydrogels have huge development potentials and promising future in wastewater treatment and removal of heavy metal ions in aqueous solutions. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42110.     

室温交联PVA水凝胶的制备与性能研究

以环氧氯丙烷为交联剂,采用室温化学交联法制备了聚乙烯醇(PVA)水凝胶,研究了交联温度和交联时间对PVA溶胀性能和力学性能的影响,借助差示扫描量热法(DSC)和扫描电子显微镜(SEM)对PVA水凝胶进行分析表征。结果表明,当交联时间为3d且交联温度为50℃时PVA水凝胶的综合性能最佳。PVA的玻璃化转变温度为-54.50℃,PVA水凝胶中包含有自由水、束缚水和非冷冻水。     

Hexafunctional poly(propylene glycol) based hydrogels for the removal of heavy metal ions

Two types of degradable poly(propylene glycol) (PPG) hydrogels that are suitable for the absorption of heavy metals have been presented. The PPG‐O‐P(O)Cl₂ fragments obtained by treating hexafunctional PPG with phosphorous oxychloride (POCl₃) react with 1,3‐propanediamine (PDA; Gel‐1 ) or PDA together with 1,2‐ethanedithiol ( Gel‐2 ), to yield cross‐linked and water‐swellable hydrogels in a one‐pot method. This protocol for the fabrication of PPG hydrogels exhibits promising advantages over prior methods including a short reaction time, mass‐production, easy separation, and high yield. A series of heavy metal ions were employed to test the adsorptive properties of the hydrogels. Gel‐2 shows better adsorption capacity than Gel‐1 for all the metal ions and the metal ions adsorption efficiency of the two types of hydrogels is in the order of Fe(III) > Pb(II) > Cd(II) > Zn(II) > Cu(II) > Ni(II) > Co(II) > Hg(II). The amounts of metal ions adsorbed increases with metal ion concentration and hydrogel dosage, but decreases with temperature. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40610.     

Reactive electrospinning of poly(vinyl alcohol) nanofibers

We aim to couple the electrospinning in‐line with solution chemistry to fabricate novel crosslinked polymer nanofibers. Poly(vinyl alcohol) (PVA) was used as a model polymer due to its high amount of hydroxyl groups. To obtain ideal parameters for electrospinning, pure PVA was explored primarily. To gain crosslinked fibers, PVA was first crosslinked partially with glutaraldehyde (GA) followed by transferring this precursor to a long hot tube which was used as reactor and then electrospun right before gelation. The preheating time and tube‐passing time were determined with viscometer and rheometer. The reactive as‐spun fibers could maintain their original morphology after water immersion due to their high crosslinking degree. The thermal stability and mechanical property of reactive as‐spun fibers were improved drastically compared with pure and GA vapor crosslinked PVA fibers. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012