Biocatalyic synthesis of unusually photoluminescent oligomers and electrically conducting polymers of 4‐(3‐pyrrolyl)butyric acid

Unusually photoluminescent undoped oligomers and doped electrically conducting polymers of 4‐(3‐Pyrrolyl)butyric acid have been enzymatically synthesized using the oxidoreductase soybean peroxidase as a catalyst. This biocatalytic approach provides a direct route to a fluorescent‐undoped oligomer of pyrrole that requires no protection/deprotection chemistry. The synthesis is carried out in aqueous media that requires only monomer, enzyme, and hydrogen peroxide. The undoped oligomer exhibits stable emission properties and is highly sensitive to the presence of environmentally important metal ions, such as Co(II), Hg(II), and Cu(II) in solution. Electrically conducting polymers can also be obtained by adding a dopant to a buffered reaction solution prior to initiating the polymerization. Polymers doped with camphor‐10‐sulfonic acid exhibit conductivity values as high as 10^?2 S/cm. Additionally, polymers synthesized in the presence of a biobased cationic template, N,N,N‐trimethylchitosan chloride, exhibit conductivity values that are an order of magnitude greater than polymers synthesized with the anionic polymeric template, poly(styrene sulfonic acid)‐sodium salt. The biobased synthetic strategy described here is the first report of directly obtaining an undoped, fluorescent conjugated oligomer of a pyrrole in aqueous solution. Unlike conventional chemical catalysts, the enzyme does not dope the oligomer and therefore provides the opportunity to directly obtain fluorescent conjugated species. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 41035.     

Fluorescent chemosensor based on the conjugated polymer incorporating 2,2′‐bipyridyl moiety for transition metal ions

A fluorescent conjugated polymer was synthesized by the polymerization of 1,4‐dibromo‐2,3‐bisbutoxynaphthalene ( M‐2 ) with 5,5′‐divinyl‐2,2′‐bipyridine ( M‐3 ) via Heck reaction. The conjugated polymer shows strong blue–green fluorescence because of the extended π‐electronic structure between the repeating unit 2,3‐bisbutoxynaphthyl group and the conjugated linker 2,2′‐bipyridyl (bpy = 2,2′‐bipyridine) moiety via vinylene bridge. The responsive properties of the conjugated polymer on transition metal ions were investigated by fluorescent and UV–vis spectra. The results show that Cu²⁺ and Ni²⁺ can form nonradiative metal‐to‐ligand charge‐transfer complexes with the polymer, whereas, Zn²⁺ and Cd²⁺ do not produce the pronounced differences from the polymer fluorescence and UV–vis spectra. The fluorescent quenching can probably be attributed to the intramolecular photoinduced electron transfer (PET) or photoinduced charge transfer (PCT). The results can also suggest that 2,2′‐bipyridyl moiety in the main chain backbone of the conjugated polymer can act as the recognition site of a special fluorescent chemosensor for sensitive detection of transition metal ions. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Water‐soluble fluorescent nanoparticles without distinct aggregation of conjugated polymer chains

In a previous study, we reported water‐soluble light‐emitting nanoparticles with distinct interchain aggregation states of the constituent conjugated polymers. These interchain states usually result in strong self‐quenching, dramatically reducing the quantum efficiency of fluorescence. In the work reported in the present study, we developed new water‐soluble fluorescent nanoparticles without distinct aggregation of the conjugated polymer chains, which demonstrated distinctive morphologies and optical properties. ‘Strawberry’ morphologies of the nanoparticles were directly observed using transmission electron microscopy. The conjugated polymers were dispersed in the individual cores of the nanoparticles and the majority of the core diameters were in the range 8–12 nm. The primary optical properties of the conjugated polymers in tetrahydrofuran still remained in the nanoparticles. The results suggest that the conjugated polymer chains formed a possible unimolecular structure without distinct aggregation in the nanoparticles. Copyright © 2010 Society of Chemical Industry     

Hyperbranched polymer based on triphenylamine and pyridine: Fluorescent chemosensors for palladium ions

Two new hyperbranched fluorescent conjugated polymers containing pyridine units were synthesized via Heck coupling reaction and Sonogashira coupling reaction, respectively, and characterized by ¹H NMR, ¹³C NMR, FTIR, and GPC. The copolymers are readily soluble in common organic solvents such as chloroform, THF, and DMF. Thermal analysis revealed that the copolymers had good thermal stability. The fluorescence quenching behaviors of the hyperbranched copolymers by metal ions were studied. It was found that the fluorescence of the copolymers can be effectively quenched by Pd²⁺. Moreover, the two hyperbranched copolymers exhibited different quenching efficiency, which may be related to difference in the hindrance for the chelation of pyridine unit with metal ions of the two polymers. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Detection of heavy metal ions using a water‐soluble conjugated polymer based on thiophene and meso‐2,3‐dimercaptosuccinic acid

This work reports the synthesis of a new water‐soluble conjugated polymer, which interacts specifically with heavy metal ions such as lead and mercury. In order to produce such a material, the fluorescent properties of polythiophene, which constitutes the polymer backbone, were combined with the chelating capacity of meso‐2,3‐dimercaptosuccinic acid, which forms the side‐chain of the conjugated polymer. Thus, the new polymer acts as chemical complexing agent, the fluorescence of which is quenched in the presence of heavy metal ions. A possible explanation of the mechanism of such a variation is also discussed. The system presented is envisaged to be used as a sensor for heavy metal ions that appear as pollutants in the environment .     

荧光共轭聚合物的结构设计与合成方法研究

荧光共轭聚合物既有机小分子荧光材料优良的光学品质,又具有高分子材料优越的可加工性能,成为了荧光材料的研究热点。因此,荧光共轭聚合物在开发新型化学、生物及爆炸物传感器等方面具有非常广阔的应用前景。本文介绍了几种典型的荧光聚合物,重点介绍了聚合物中荧光发色团的合成,从分子结构设计、应用及优缺点等方面对各种合成方法进行阐述比较。并且展望了今后荧光共轭聚合物的发展前景。     

A fluorescent chemosensor based on optically active 2,2′‐binaphtho‐20‐crown‐6 for metal ions

A chiral conjugated polymer can be obtained by the polymerization of (S)‐6,6′‐dibromo‐2,2′‐binaphtho‐20‐crown‐6 and 1,4‐divinyl‐2,5‐dibutoxybenzene via a palladium‐catalyzed Heck cross‐coupling reaction. The chiral conjugated polymer shows strong green‐blue fluorescence. The responsive properties of the chiral polymer to metal ions were investigated using fluorescence and UV‐visible absorption spectra. K⁺, Pb²⁺, Cd²⁺ and Ba²⁺ enhance the fluorescence of the polymer; in contrast, Hg²⁺ causes effective quenching of the fluorescence of the polymer. The obvious influences on the fluorescence indicate that the 2,2′‐binaphtho‐20‐crown‐6 moiety plays an important role in fluorescence recognition for Hg²⁺ due to the effective photo‐induced electron transfer or charge transfer between the conjugated polymer backbone and the receptor ions. The responsive properties of the polymer to metal ions show that the chiral conjugated polymer incorporating 2,2′‐binaphtho‐20‐crown‐6 moieties in the main‐chain backbone as recognition sites can act as an excellent fluorescent probe for the sensitive detection of Hg²⁺. Copyright © 2010 Society of Chemical Industry     

Smart anionic polyelectrolytes based on natural polymer for complexation of cationic surfactant

The thermosensitive polyelectrolytes were obtained by grafting 2‐acrylamido‐2‐methyl‐1‐propanesulfonic acid (AMPS) onto hydroxypropylcellulose (HPC), a biodegradable polysaccharide. The interactions of the polymers with dodecyltrimethylammonium chloride (DTAC), a model cationic surfactant, were studied. It was found by the measurements of the surface tension and the analysis of fluorescence emission of pyrene used as a fluorescent probe, that the HPC–AMPS graft polymers strongly interact with DTAC with the formation of polymer–surfactant complexes. The critical aggregation concentrations of these polymer–surfactant systems were found to be of the order of 10^?5 mol/dm³. The polymers were found to be potentially useful in the purification of water from cationic surfactants. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 2401–2407, 2006     

Fluorescent chemosensor for metal ions based on optically active polybinaphthyls and 1,3,4-oxadiazole

Linear chiral polymers P-1 and P-2 were synthesized by the polymerization of (R)-5,5′-dibromo-6,6′-di(4-methylphenyl)-2,2′-bisoctoxy-1,1′-binaphthyl (R-M-1) with 2,5-di(4-vinylphenyl)-1,3,4-oxadiazole (M-2) and 2,5-di(4-tributylstannylphenyl)-1,3,4-oxadiazole (M-3) via Heck and Stille cross-coupling reaction, respectively. The chiral conjugated polymer P-1 can show strong green-blue fluorescence, and the chiral polymer P-2 shows strong blue fluorescence. While the conjugated polymers P-1 and P-2 were used as fluorescent chemosensor for metal ions, their fluorescence can be efficiently quenched on the addition of different metal ions. The obvious quenching effect of the polymers P-1 and P-2 indicates that the intramolecular photoinduced electron transfer (PET) or photoinduced charge transfer (PCT) between the polymer backbone and receptor-ions in the main chain of fluorescent chemosensor can lead to the pronounced fluorescence quenching. The results also show that the chiral polymers P-1 and P-2 incorporating 1,3,4-oxadiazole moiety as the recognition site can act as a special fluorescent chemosensor for the appropriate detection of the sensitive and selective sense of metal ions.     

Pyrene‐functional star polymers as fluorescent probes for nitrophenolic compounds

Novel tetra‐armed star‐shaped styrenic copolymers with pyrene side groups [ (S1‐S3)‐Pyr ] were prepared and employed as fluorescence sensing probe for fast and sensitive determination of nitroaromatic compounds. (S1‐S3)‐Pyr depicted characteristic pyrene monomer emission signals as well as broad excimer bands in their fluorescence emission spectra due to close proximity of the pyrene groups on the polymer chains and the ratio of monomer to excimer emission intensities gradually decreased as the pyrene content of the star polymers were increased from S1‐Pyr to S3‐Pyr . The highest quenching efficiency in the presence of 25 equivalent nitroaromatics was observed for 2,4,6‐trinitrophenol/picric acid (99.4%) followed by 2,4‐dinitrophenol (84.2%), 4‐nitrophenol (82.6%), 2,4,6‐trinitrotoluene (44.0%), 2,4‐dinitrotolunene (32.6%), and 4‐nitrotoluene (28.8%). Superior quenching efficiencies of nitrophenolic compounds were ascribed to their strong binding affinity for (S1‐S3)‐Pyr due to the acidity of phenolic hydroxyl units. Besides, quenching ratios of S1‐Pyr , S2‐Pyr , and S3‐Pyr were measured to be very close to each other. Thus, (S1‐S3)‐Pyr are considered to be highly selective and sensitive fluorescence probes for phenolic nitroaromatic compounds. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46310.     

Synthesis and characterisation of fluorescent pyrene‐end‐capped polylactide fibres

Fluorescent markers are critical for tracking the position and movement of molecules both in vivo and in vitro. Conventionally, synthetic dyes are non‐covalently added to polymers for fluorescent tracking, but often diffuse away. Here we demonstrate, for the first time, a facile method for the synthesis of fluorescent poly(lactic acid) nano‐/microfibres for biomedical applications using solution spin blowing. Pyrene‐end‐capped poly(l ‐lactide) (PLLA) derivatives were synthesised using the ring‐opening polymerisation of l ‐lactide and they were characterised using spectroscopic and thermal analyses. Submicrometre‐sized fluorescent fibres were produced from these PLLA derivatives using solution blow spinning techniques generating polymer blends and core–shell fibres. Such system could be further exploited to incorporate electrically conductive carbon allotropes via the pyrene aromaticity, producing fluorescent and electrically active fibres for in vitro monitoring and electrical stimulation. © 2018 Society of Chemical Industry     

Fluorescent polyelectrolytes as protein sensors

This review discusses recent advances in protein sensing using fluorescent polyelectrolytes that are mainly water‐soluble conjugated polymers. A quencher‐labeled substrate or fluorophore‐labeled substrate is generally used as a probe. In the presence of an enzyme, the linker between substrate and quencher/fluorophore is cleaved and fluorescence of the polymer is either ‘turned on’ or ‘turned off’. Fluorescence behavior of these conjugated polymers is highly sensitive to conformation of the polymeric chains. Since upon binding with proteins the conformation is perturbed and fluorescence is affected, these polyelectrolytes have been used to study conformational changes in proteins. The conformation‐dependent fluorescence is also a limitation for these sensors in some cases and non‐conjugated polyelectrolytes have been shown to provide an alternative. Copyright © 2006 Society of Chemical Industry     

Facile catalytic ring opening polymerization of lactic acid: Comparing the performance of Fe and Zn metal species

As a bio‐compatible/degradable polymer, poly(lactic acid) (PLA) has been widely noticed in tissue engineering and medical applications. Proper catalytic ring‐opening polymerization of lactic acid is pertinent to development of active metal species capable of producing high‐molecular‐weight polymers. In this work, ligand catalyst (2,4‐di‐tertio‐butyl‐6‐{[(2‐di‐methyl‐amino ethyl) methyl amino] methyl} phenol) was synthesized and then attached to Fe‐based and Zn‐based metal substitutes, and performance of metal species toward ring opening polymerization of lactic acid has been investigated. Regulation of reaction condition at 180°C for 36 h with Zn‐based catalyst allowed for late‐stage production of a high‐molecular‐weight PLA, while Fe‐based facilitated polymerization at early stages leading to PLAs with comparatively twofold higher molecular weight at lower time, monomer‐to‐initiator ratio, and temperature (at 170°C). A ratio of monomer to initiator of 5000 with Fe catalyst resulted in the highest molecular weight. Thus, polymerization has been facilitated by the use of Fe‐based catalyst. For this class of catalyst with Fe substitute, the product was characterized by means of ¹H‐NMR, Fourier transform infrared spectroscopy, and differential scanning calorimetry analyses. J. VINYL ADDIT. TECHNOL., 25:215–224, 2019. © 2018 Society of Plastics Engineers     

Fluorescent products and polyunsaturated fatty acids of human testes

Lipid soluble fluorescent pigments from human testis were fractionated by silicic acid column chromatography and silica gel thin layer chromatography. Fluorescence analyses revealed a family of at least 3 compounds with similar fluorescence properties, including excitation and emission maxima, reversible fluorescence quenching by alkaline pH, and fluorescence quenching by heavy metal chelation. These fluorescence characteristics strongly indicated the presence of the conjugated Schiff base fluorophore-N=C-C=C-N-. The chromatographic separations employed enabled a more definitive fluorescence characterization of the lipid soluble pigments known to accumulate late in tissues with age and as a result of lipid peroxidation. Total lipids and fatty acid composition of the total lipids were determined. Polyenoic acids constituted about 40% of the total fatty acids. Histological examination of the tissues revealed some degeneration and edema, but significant spermatogenesis and normal complement of Leydig cells.     

Optical sensor based on fluorescent PMMA/PFO electrospun nanofibers for monitoring volatile organic compounds

The development of polymeric materials with superior electrical and/or optical properties is highly demanded for designing optical gas sensors, where conjugated polymers play an important role due to their π‐electron conjugation. However, usually the low processability and high cost of these materials hinder technological applications. Here we report on a simple route to develop highly fluorescent electrospun nanofibers of poly(methyl methacrylate) (PMMA) containing low contents of polyfluorene (PFO). The PMMA_PFO nanofibers were characterized by scanning electron microscopy, Fourier transform infrared spectroscopy, and thermogravimetric analysis, while the luminescence properties changes were evaluated by exposing the PMMA_PFO nanofibers to distinct volatile organic compounds (VOCs) including ethanol, toluene, tetrahydrofuran, acetone, dichloromethane, and chloroform. The changes in luminescence properties, specifically fluorescence quenching, of PMMA_PFO nanofibers were analyzed in terms of conformational changes from glassy‐phase to β‐phase of PFO when the nanofibers were exposed to the VOCs. The developed nanostructured platform showed a suitable response to detect chloroform, with linear responses in the concentration range from 10 to 300 ppm and from 350 to 500 ppm and limits of detection of 47.9 and 15.4 ppm, respectively. The results suggest the PMMA_PFO electrospun nanofibers are highly potential materials for optical gas sensor applications based on luminescence quenching. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46128.     

Synthesis of a novel fluorene-based conjugated polymer with pendent bulky caged adamantane moieties and its application in the detection of trace DNT explosives

A novel fluorene-based conjugated polymer with phenylene spacers and steric bulky adamantane moieties in side chains has been synthesized by palladium-catalyzed Suzuki coupling reactions. This design strategy offers several advantages for the detection of trace 2,4-dinitrotoluene (DNT) vapor. The incorporation of the two groups into polymer side chains could retain an effective conjugation length and prevent the π-stacking of polymer chains. The detection of DNT vapor indicated that the polymer displayed higher fluorescence quenching sensitivity toward the explosives in films compared to reference polymers. The fluorescence quenching efficiency of the fluorescent polymer achieved 33.3% in 10 s and 71.1% in 60 s. The pathways or cavities generated by the two spacers are beneficial for the rapid diffusion of explosive vapor into the film interiors and increase the fluorescence quenching efficiency of the film.     

Organic acids catalyzed polymerization of ε‐caprolactone: Synthesis and characterization

Environmentally friendly organocatalytic synthesis of aliphatic polyesters was studied. The catalysis investigated is novel, and lends itself well to the potential production of valuable biodegradable products. The reactions were based on an organic acids‐catalyzed ring‐opening polymerization of ε‐caprolactone with fatty acid derivatives as the initiator and were performed in the absence of solvents. The chemical structures of the functionalized polymers were confirmed by ¹H and ¹³C‐NMR spectra. Polymers with different molecular weights, in the range 10,900–15,200 were obtained in the presence of fumaric acid as catalyst. The thermal properties of the functionalized PCLs were determined by modulated differential scanning calorimetry and thermogravimetric analysis. The MDSC results verified that the crystallinity and the melting point of the lipid‐functionalized polymers were lower than that of the unfunctionalized poly(ε‐caprolactone). The hydrolytic degradation of the functionalized polymer was also investigated. The result shows the degradation rate was affected by the presence of oleic acid derivatives in the polymer molecule. The lipid‐functionalized polymers synthesized by the metal‐free polymerization systems seem to be suitable biodegradable polyesters for use in biomedical and pharmacological applications. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Conjugated fluorescent polymer sensor for proteolytic activity detection with designed specificity

A portable fluorescence assay for direct endopeptidase activity detection has been developed with the use of a cyclophane‐based conductive conjugated fluorescent polymer and peptide substrates. The substrates, carrying internal quenching amino acid, were designed to be cleaved in a sequence‐specific manner by a protease of interest. Intact substrates were incapable of quenching the fluorescence of the polymer due to steric constraints. Upon specific cleavage, the quencher became exposed and could interact with the ring structure of the fluorescent polymer, disrupting the conjugation and quenching the fluorescence along the polymer chain. The approach was developed using a model Glu‐C endopeptidase from Staphylococcus aureus strain V8, detected in the picomolar to micromolar concentration range. The developed assay was tested for the detection of endopeptidase activity of botulinum toxin. The feasibility study showed that botulinum neurotoxin (BoNT)‐A could be detected down to picomolar concentration, with limit of detection of 5 pg, or 33 amol in 5 µL of sample, and a total assay time under 2 h. The assay exhibited high specificity and no cross‐reactivity with BoNT‐B was detected. Following this proof‐of‐concept work, the assay can be further optimized and expanded to differentiate between various botulinum toxin serotypes in their active proteolytic form, or modified for detection of proteases with other specificities. © 2015 Society of Chemical Industry     

Fluorescence Intensity Modulation in Photochromic Conjugated Polymer Systems

The ability to modulate fluorescence intensity with a light signal enables a variety of applications based on fluorescence imaging. One approach to fluorescence photomodulation involves using a photochromic moiety that responds to a light signal in conjunction with a nearby fluorophore. We employ conjugated polymers based on poly(p-phenylene vinylene) (PPV) as the fluorophore in photochrome-fluorophore systems for fluorescence modulation. Advantages of using conjugated polymers for this purpose include their intrinsic energy migration processes that enable amplified fluorescence quenching as well as their processability. Here we present examples of PPV-based photomodulation systems that employ photochromic dyes from three common photochromic families: azobenzenes, spironaphthoxazines, and diarylethenes. In all cases we observe reversible fluorescence quenching due to fluorescence resonance energy transfer to the photogenerated form of the photochrome. Examples of the photomodulation of photochromic PPV systems in organic solution, polymer films, and conjugated polymer nanoparticles are presented.