Preparation of block copolymers via metal‐free visible‐light‐induced ATRP for the detection of lead ions

Polyacrylamide‐b‐poly(methacrylic acid) was prepared on the surface of Au electrode (Au/PAM/PMAA) for Pb²⁺ ion electrochemical sensing via metal‐free visible‐light‐induced atom transfer radical polymerization, which was very simple, convenient, and environmentally friendly. Au/PAM/PMAA was carefully examined by cyclic voltammetry, electrochemical impedance spectroscopy, and X‐ray photoelectron spectroscopy. Further, Au/PAM/PMAA was successfully used for the determination of Pb²⁺ ion by differential pulse anodic stripping voltammetry. Under the optimal conditions, a linear response from 1.0 × 10^?11 to 1.0 × 10^?4 mol/L with detection limit of 2.5 × 10^?12 mol/L (S/N = 3) was achieved from the results of experiments. Comparing with similar Pb²⁺ sensors, the broader linear range and lower detection limit suggested the promising prospect of Au/PAM/PMAA. In a word, the work of this article had an important significance for the polymer‐modified electrodes and the sensitive detection of Pb²⁺. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 45863.     

Voltammetric determination of alkannin using an Au nanoparticles–poly(diallyldimethylammonium chloride)-functionalized graphene nanocomposite film

An electrochemical sensor based on Au nanoparticles (AuNPs)–poly(diallyldimethylammonium chloride) (PDDA)-functionalized graphene (AuNPs–PDDA-G) nanocomposite was fabricated for the sensitive detection of alkannin. The nanocomposite was characterized by X-ray diffraction, ultraviolet/visible spectra, scanning electron microscopy, and transmission electron microscopy. Cyclic voltammetry and differential pulse voltammetry were used to investigate the electrochemical behaviors of alkannin on the AuNPs–PDDA-G nanocomposite film-modified glassy carbon electrode. This electrochemical sensor displayed satisfactory analytical performance for alkannin detection over a range from 5.0 nmol L^?1 to 3.0 μmol L^?1 with a detection limit of 1.4 nmol L^?1 (S/N = 3). Moreover, the sensor also exhibited good reproducibility and stability, and could be used for the detection of alkannin in real samples with satisfactory results.     

<Emphasis Type="Italic">Meso</Emphasis>-Tetra-(3,5-Dibromo-4-Hydroxydroxyphenyl) Porphyrin Copper (II) Self-Assembled Modified Gold Electrode Through <Emphasis Type="SmallCaps">l</Emphasis>-Cysteine: The Preparation,Electrochemical Behavior and its Application

In this study, a sensor for the sensitive determination of ascorbic acid (AA) has been fabricated based on meso-tetra-(3,5-dibromo-4-hydroxydroxyphenyl) porphyrin copper (II) (T(DBHP)P-Cu) modified Au electrode through l-cysteine (l-cys). Firstly, l-cys modified Au electrode was prepared through self-assembled technology. Then T(DBHP)P-Cu was adsorbed on l-cys/Au through covalent binding. The fabrication process and electrochemical behavior of T(DBHP)P-Cu/l-cys/Au were studied by cyclic voltammetry and differential pulse voltammetry. The results showed that AA exhibited good electrochemical activity at T(DBHP)P-Cu/l-cys/Au. The oxidation peak current increased linearly with AA concentration in the range of 1.00 × 10⁻³–1.02 × 10⁻⁵ mol L⁻¹ with a detection limit of 5.41 × 10⁻⁷ mol L⁻¹. Additionally, the modified electrode could be applied to the detect AA in practical samples.     

Molecularly imprinted electrochemical sensor for the determination of ampicillin based on a gold nanoparticle and multiwalled carbon nanotube‐coated pt electrode

A novel molecularly imprinted electrochemical sensor was developed for the sensitive and selective determination of ampicillin (AMP). The sensor was prepared on a platinum electrode modified with multiwalled carbon nanotubes (MWCNTs), gold nanoparticles (AuNPs), and a thin film of molecularly imprinted polymers (MIPs). MWCNTs and AuNPs were introduced to enhance the sensor's electronic transmission and sensitivity. The molecularly imprinted polymer (MIP) was synthesized using AMP as the template molecule, methacrylic acid as functional monomer, and ethylene glycol maleic rosinate acrylate (EGMRA) as cross‐linker. The performance of the proposed imprinted sensor was investigated using cyclic voltammetry (CV), differential pulse voltammetry (DPV), and electrochemical impedance spectroscopy (EIS). The results showed that the imprinted film displayed a fast and sensitive response to AMP. Under optimal conditions, response peak current had a linear relationship with the concentration of AMP in the range of 1.0 × 10^?8 mol/L to 5.0 × 10^?6 mol/L and a detection limit of 1.0 × 10^?9 mol/L (S/N = 3). This imprinted sensor was used to detect AMP in food samples with recoveries of 91.4–105%. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40613.     

Construction of a novel sensor based on electropolymerization of carmine for voltammetric determination of 4‐nitrophenol

4‐Nitrophenol (4‐NP) has been determined with voltammetric technique based on a novel sensor fabricated by electropolymerization of carmine on a glassy carbon electrode (GCE). An obvious reduction peak located at about ?0.700 V and a couple of redox peaks that were not well‐defined were observed in the potential range of ?1.00 to 0.600 V. Compared with its voltammetric behavior on a bare GCE, the reduction peak potential shifted positively and the peak current increased significantly. All experimental parameters were optimized and linear sweep voltammetry was proposed for its determination. In the optimal conditions, the reduction peak current was proportional to the 4‐NP concentration over the concentration range from 5.00 × 10^?8 to 1.00 × 10^?5 mol L^?1, and the detection limit was 1.00 × 10^?8 mol L^?1 after 200 s of accumulation. The high sensitivity and selectivity of the sensor was demonstrated by its practical application for the determination of trace amounts of 4‐NP in lake water. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 3271–3277, 2007     

Preparation of poly(9‐aminoacridine)‐modified electrode and its application in the determination of dopamine and ascorbic acid simultaneously

A novel modified electrode was fabricated with 9‐aminoacridine by electropolymerization in the phosphate buffer solution (PBS) (pH 7.4) and was characterized by cyclic voltammetry (CV). The modified electrode showed excellent electrocatalytic effect and high stability toward the electrochemical oxidation of dopamine (DA) and ascorbic acid (AA). Also, it showed a high stability for the determination of DA and AA simultaneously. Well‐separated voltammetric peaks were observed for DA and AA on the modified electrode. The separation of two anodic peaks was 170 mV, which was large enough to eliminate the interference of AA and determine DA. The differential pulse voltammograms (DPV) were used for the measurement of DA by means of the poly(9‐aminoacridine)‐modified electrode in PBS at pH 7.4. A linear response toDA was observed in the concentration range from 1.5 × 10^?6 to 3.5 × 10^?3 mol L^?1 with a correlation coefficient of 0.9998 and a detection limit (S/N = 3) of 1.0 × 10^?7mol L^?1. The proposed method was used to determine DA in DA‐hydrochloride injection and showed excellent sensitivity and recovery. The ease of fabrication, good reproducibility, high stability, and low cost of the modified electrode are the promising features of the proposed sensor. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 3864–3870, 2007     

Zinc ion-imprinted polymer based on silica particles modified carbon paste electrodes for highly selective electrochemical determination of zinc ions

ABSTRACT

In this study, Zn(II) ion-imprinted polymer was prepared on the surface of vinyl silica particles and applied for detection of Zn(II) ions using differential pulse voltametry. The ion- imprinted polymer particles were prepared by free radical polymerization. The prepared particles were characterized by different morphological and elemental techniques. The ion-imprinted particles were used to fabricate the carbon paste electrode as a zinc ions sensor. The modified zinc sensor showed linear response in the concentration range 6.12 × 10^?9 to 4.59 × 10^?8 mol L^?1. The limit of detection and limit of quantification of the electrode were 1.351 × 10^?8 and 4.094 × 10^?8 mol L^?1, respectively.     

A Novel Amperometric Sensor for Salicylic Acid Based on Molecularly Imprinted Polymer-Modified Electrodes

A novel electrochemical MIP-sensor for salicylic acid (SA) has been synthesized firstly by electropolymerizing o-phenylenediamine on glassy carbon electrode in presence of template molecule (salicylic acid). The response of the sensor to SA is investigated by square wave voltammetry (SWV). The linearity is obtained over a concentration range of 6 × 10^?5 ～ 1 × 10^?4 mol/L (R² = 0.9961). And the detection limit of SA is about 2 × 10^?5 mol/L. The sensor exhibits good selectivity for salicylic acid by virtue of the interaction between molecularly imprinted binding sites and the template.     

Synthesis of cellulose/reduced graphene oxide/polyaniline nanocomposite and its properties

A series of conductive nanocomposites cellulose/reduced graphene oxide/polyaniline (cellulose/RGO/PANi) were synthesized via in situ oxidative polymerization of aniline on cellulose/RGO with different RGO loading to study the effect of RGO on the properties of nanocomposites. The results showed that when RGO is inserted into cellulose/PANi structure, its thermal stability and conductivity are increased. So that adding of only 0.3 wt% RGO into the cellulose/PANi structure, its conductivity is increased from 1.1 × 1 10^?1 to 5.2 × 110^?1 S/cm. Scanning electron microscopy results showed that the PANi nanoparticles are formed a continuous spherical shape over the cellulose/RGO template; this increases the thermal stability of nanocomposite.     

Ultrasound–assisted synthesis and characterization of polymethyl methacrylate/reduced graphene oxide nanocomposites

This article reports ultrasound–assisted synthesis of polymethyl methacrylate (PMMA)/reduced graphene oxide (RGO) nanocomposites by in situ emulsion polymerization coupled with in situ reduction of graphene oxide. The thermal degradation kinetics of the nanocomposites was also assessed with Criado and Coats‐Redfern methods. Intense microconvection generated by ultrasound and cavitation results in uniform dispersion of RGO in the polymer matrix, which imparts markedly higher physical properties to resulting nanocomposites at low (≤1.0 wt %) RGO loadings, as compared to nanocomposites synthesized with mechanical stirring. Some important properties of the PMMA/RGO nanocomposites synthesized with sonication (with various RGO loadings) are: glass transition temperature (0.4 wt %) = 124.5°C, tensile strength (0.4 wt %) = 40.4 MPa, electrical conductivity (1.0 wt %) = 2 × 10^?7 S/cm, electromagnetic interference shielding effectiveness (1.0 wt %) = 3.3 dB. Predominant thermal degradation mechanism of nanocomposites (1.0 wt % RGO) is 1D diffusion with activation energy of 111.3 kJ/mol. © 2017 American Institute of Chemical Engineers AIChE J, 64: 673–687, 2018     

Ordered mesoporous Co3O4 nanospheres / reduced graphene oxide composites for rutin detection

The ordered mesoporous Co₃O₄ nanospheres encapsulated with reduced graphene oxide (denoted as meso-Co₃O₄ / RGO) were synthesized via electrostatic interaction and firstly for the electrochemical detection of rutin with good sensing effects. The resultant meso-Co₃O₄ / RGO nanocatalyst not only possesses more active sites due to the high surface area deriving from the mesoporous structure, but also has benign conductibility due to the presence of RGO, both of which enhance the sensing properties for the electrochemical detection of rutin. The developed sensor displays low detection limit (0.03?μM) and large sensitivity (74.85?μA?μM^?1 cm^?2). Besides, the rutin sensor possesses good selectivity, stability and reproducibility.     

Novel Electrochemical Sensor Based on Molecularly Imprinted Polymers with MWCNTs-SiO2 for Selective and Sensitive Detecting 2,4-D

In this study, we introduced molecular imprinting combined with electrochemical method to determine trace 2,4-dichlorophenoxyacetic acid (2,4-D) herbicide in standard solution and actual samples. For this purpose, we synthesis of vinyl silica coated MWCNTs in alkaline environment with surfactant, molecularly imprinted polymers were prepared on the surface of MWCNTs by free radical polymerization, following the composite materials were dissolved in chitosan solution and dropped on the glassy carbon electrode. The functionalized materials were characterized by fourier transform infrared spectroscopy, scanning electron microscopy, transmission electron microscopy, thermogravimetry and nitrogen adsorption desorption. Electrochemical performance of molecularly imprinted membrane was characterized by cyclic voltammetry, electrochemical impedance spectroscopy and differential pulse voltammetry. Selectivity, stability and reproducibility of the sensors were also studied and discussed. A good linear relationship for supervising 2,4-D from 1.0?×?10^?4 to 1.0?×?10^?8 mol L^?1 with the correlation coefficient of 0.994 and a low LOD of 4.270?nmol?L^?1 (S/N?=?3). The electrochemical sensor has been successfully applied to detect 2,4-D with a recovery rate ranges from 96.2 to 102.4% and a relative standard deviation of less than 4.74%. This work provides potential ideas for detection of trace 2,4-D in real samples.

     

Sensitive detection of rutin based on β-cyclodextrin@chemically reduced graphene/Nafion composite film

An electrochemical sensor based on chemically reduced graphene (CRG) was developed for the sensitive detection of rutin. To construct the base of the sensor, a novel composite was initially fabricated and used as the substrate material by combining CRG and β-cyclodextrin (β-CD) via a simple sonication-induced assembly. Due to the high rutin-loading capacity on the electrode surface and the upstanding electric conductivity of graphene, the electrochemical response of the fabricated sensor was greatly enhanced and displayed excellent analytical performance for rutin detection from 6.0 × 10⁻⁹ to 1.0 × 10⁻⁵ mol L⁻¹ with a low detection limit of 2.0 × 10⁻⁹ mol L⁻¹ at 3σ. Moreover, the proposed electrochemical sensor also exhibited good selectivity and acceptable reproducibility and could be used for the detection of rutin in real samples. Therefore, the present work offers a new way to broaden the analytical applications of graphene in pharmaceutical analysis.     

Electrochemical sensing of NADH on NiO nanoparticles-modified carbon paste electrode and fabrication of ethanol dehydrogenase-based biosensor

In this work, an electrochemical β-nicotinamide adenine dinucleotide (NADH) sensor based on a carbon paste electrode modified with nickel oxide nanoparticles (NiONPs) was developed. The key highlights of this work are ease of preparation of the NiONPs-modified carbon paste electrode (NiONPs/MCPE), and its high sensitivity to NADH. The electrochemical characterization of NiONPs/MCPEs was performed via cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). The electrochemical oxidation response of NADH was investigated by differential pulse voltammetry and chronoamperometry. The results indicated that the electrocatalytic effects of NiONPs on the response current of NADH significantly facilitated the electron transfer and improved the performance of the biosensor. Compared to bare carbon paste electrode (BCPE), the oxidation potential was shifted toward more negative potentials and the oxidation current was increased remarkably. Under optimum conditions, NADH could be detected in the range from 1.0 × 10^?4 to 1.0 mmol L^?1 with lower detection limit (0.05 μmol L^?1). The proposed NADH sensor demonstrated fast and reproducible response. Furthermore, an ethanol biosensor was prepared using NiONPs and NAD⁺-dependent alcohol dehydrogenase enzyme giving linear responses over the concentration range of 1.6 and 38 mmol L^?1 of ethanol.     

Poly(crystal violet)/graphene-modified electrode for the simultaneous determination of trace lead and cadmium ions in water samples

A novel poly(crystal violet)/graphene-modified glassy carbon electrode (PCV/Gr/GCE) was fabricated for the simultaneous determination of Pb²⁺ and Cd²⁺. The electrochemical behavior of both species at the PCV/Gr/GCE was investigated employing cyclic voltammetry. In acetate buffer, the modified electrode showed an excellent electrocatalytical effect on the oxidation of both species and was further used for their determination. Under optimized analytical conditions, the oxidation peak currents of Pb²⁺ and Cd²⁺ obtained by differential pulse voltammetry in pH 4.6 acetate buffer showed a linear relationship with their concentrations in the ranges of 2.00 × 10^?8–1.95 × 10^?5 mol L^?1 and 4.00 × 10^?8–5.58 × 10^?5 mol L^?1, respectively. The developed method has excellent sensitivity, selectivity, reproducibility and has been successfully applied to the determination of Pb²⁺ and Cd²⁺ in water samples.     

Determination of epigallocatechin‐3‐gallate with a high‐efficiency electrochemical sensor based on a molecularly imprinted poly(o‐phenylenediamine) film

An electrochemical molecularly imprinted polymer (MIP) sensor for detecting the existence of epigallocatechin‐3‐gallate (EGCG) in tea and its products was successfully developed on the basis of a glassy carbon electrode modified with an electropolymerized nonconducting poly(o‐phenylenediamine) film. The properties of the electrode were characterized by cyclic voltammetry, differential pulse voltammetry, and infrared spectroscopy. The template molecules could be rapidly and thoroughly removed by methanol/acetic acid. The linear response range for EGCG was 5.0 × 10^?7–1.0 × 10^?4 mol/L, and the limit of detection was as low as 1.6 × 10^?7 mol/L. The prepared MIP sensor could discriminate between EGCG and its analogs. In addition, satisfactory results were obtained in the detection of real tea samples. The results of our investigation indicate that the MIP sensor was useful for the determination of EGCG with excellent selectivity, high sensitivity, repeatability, and reproducibility. This MIP sensor provides the potential for monitoring the variation of EGCG content during the industrial processes and for predicting the quality of tea and its products. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Electrochemical synthesis of ammonia from water and nitrogen catalyzed by nano-Fe<Subscript>2</Subscript>O<Subscript>3</Subscript> and CoFe<Subscript>2</Subscript>O<Subscript>4</Subscript> suspended in a molten LiCl-KCl-CsCl electrolyte

Nano-Fe₂O₃ and CoFe₂O₄ were suspended in molten salt of alkali-metal chloride (LiCl-KCl-CsCl) and their catalytic activity in electrochemical ammonia synthesis was evaluated from potentiostatic electrolysis at 600 K. The presence of nanoparticle suspension in the molten chloride resulted in improved production of NH₃, recording NH₃ synthesis rate of 1.78×10^?10 mol s^?1 cm^?2 and 3.00×10^?10 mol s^?1 cm^?2 with CoFe₂O₄ and Fe₂O₃, which are 102% and 240% higher than that without the use of a nanocatalyst, respectively. We speculated that the nanoparticles triggered both the electrochemical reduction of nitrogen and also chemical reaction between nitrogen and hydrogen that was produced from water electro-reduction on cathode. The use of nanocatalysts in the form of suspension offers an effective way to overcome the sluggish nature of nitrogen reduction in the molten chloride electrolyte.     

Determination of p-nitrophenol on carbon paste electrode modified with a nanoscaled compound oxide Mg(Ni)FeO

A novel electrochemical sensor for the determination of p-nitrophenol (PNP) was fabricated with the nanoscaled composite oxide Mg(Ni)FeO-modified carbon paste electrode (CPE), and its electrocatalytic performances were investigated using the cyclic voltammogram and differential pulse voltammetry techniques. The influential factors were optimized such as the mass ratio of Mg(Ni)FeO to graphite, the pH value of buffer solution and the accumulation time at open circuit. The indirect oxidation peak current of PNP was found to be proportional to its concentration between 2.0 × 10^?6 and 2.0 × 10^?4 M on the proposed sensor Mg(Ni)FeO/CPE under the optimal condition (10 % Mg(Ni)FeO/graphite, pH 5.0 HAc–NaAc, 120 s quiescence). The sensor Mg(Ni)FeO/CPE exhibited a high sensitivity of 811 μA mM^?1 cm^?2 and a low detection limit of 0.2 μΜ (S/N– = 3) for PNP detection, and got satisfactory results when it was applied to determine PNP in real samples. The results demonstrate that Mg(Ni)FeO/CPE based on the nanomaterial Mg(Ni)FeO with high specific area and mesoporous structure could be employed as an electrochemical sensor for PNP determination with simplicity, low cost, good selectivity, repeatability, and stability.     

Synthesis and photophysical properties of a novel green fluorescent polymer for Fe3+ sensing

BACKGROUND: In recent years, environmental pollution has become a major concern for industrial societies. The design of highly selective and sensitive sensor materials has become a very important scientific goal. RESULTS: A novel 4‐amino‐substituted 1,8‐naphthalimide dye with intense green fluorescence was synthesized. The dye was then copolymerized with methyl methacrylate. The presence of metal cations (Ca²⁺, Mg²⁺, Cr³⁺, Mn²⁺, Fe³⁺, Fe²⁺, Co²⁺, Ni²⁺, Cu²⁺ and Zn²⁺) could quench the fluorescence intensity of a tetrahydrofuran solution of the dye and the copolymer at different levels. The effect of Fe³⁺ was much stronger than that of the other cations. There was a good linear correlation between F₀/F (F₀ and F are the fluorescence intensities in the absence and presence of the metal ions, respectively) and the Fe³⁺ concentration in the range 1.33 × 10^?7–4.00 × 10^?4 mol L^?1. The polymeric sensor in a film state exhibited a dynamic response to Fe³⁺ in the concentration range from 3.44 × 10^?6 to 3.04 × 10^?3 mol L^?1 and the average response time was about 20 s. CONCLUSION: In view of the selectivity and rapid responsivity of the polymer sensor studied, it could be used as a new polymeric sensor for water pollution by Fe³⁺ cations. Copyright © 2008 Society of Chemical Industry     

Synthesis of liquid crystalline epoxy and its mechanical and electrical characteristics—curing reaction of LCE with diamines by DSC analysis

An aromatic liquid crystalline epoxy monomer based on biphenyl mesogen was synthesized and cured with three different aromatic diamines. The curing reaction characteristics were analyzed by DSC, and the data were introduced to the Kissinger equation to attain the kinetic parameters. Diglycidyl ether of 4,4′‐biphenyl (DGEBP)/4,4′‐diaminobiphenyl (DABP), and DGEBP/4,4′‐methylenediamine (MDA) systems showed an exotherm curing reaction after comelting of the monomers; the DGEBP/p‐phenylenediamine (PDA) system's curing reaction took place in the solid state without melting of monomers. The activation energy and preexponential factor for the DGEBP/DABP system were 55.6 kJ/mol and 4.0 × 10⁶ min^?1, respectively. Those values for DGEBP/MDA and DGEBP/PDA systems were 55.1 kJ/mol and 1.0 × 10⁶ min^?1 and 148.8 kJ/mol and 7.7 × 10¹⁹ min^?1, respectively. The rate constant at 100°C for DGEBP/PDA is 2 times higher than those for DGEBP/DABP and DGEBP/MDA, which have almost the same values. Strictly speaking, the rate constant of DGEBP/DABP is a little higher than that of DGEBP/MDA, and these results are in good agreement with the DSC curves. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 2419–2425, 2002