Synthesis and properties of copolymers of poly(ether ketone ketone) and poly(ether amide ether amide ether ketone ketone)

Poly(aryl ether ketone)s (PAEKs) are a class of high‐performance engineering thermoplastics known for their excellent combination of chemical, physical and mechanical properties, and the synthesis of semicrystalline PAEKs with increased glass transition temperatures (T_g) is of much interest. In the work reported, a series of novel copolymers of poly(ether ketone ketone) (PEKK) and poly(ether amide ether amide ether ketone ketone) were synthesized by electrophilic solution polycondensation of terephthaloyl chloride with a mixture of diphenyl ether and N,N′‐bis(4‐phenoxybenzoyl)‐4,4′‐diaminodiphenyl ether (BPBDAE) under mild conditions. The copolymers obtained were characterized using various physicochemical techniques. The copolymers with 10–35 mol% BPBDAE are semicrystalline and have markedly increased T_g over commercially available poly(ether ether ketone) and PEKK due to the incorporation of amide linkages in the main chain. The copolymers with 30–35 mol% BPBDAE not only have high T_g of 178–186 °C, but also moderate melting temperatures of 335–339 °C, having good potential for melt processing. The copolymers with 30–35 mol% BPBDAE have tensile strengths of 102.4–103.8 MPa, Young's moduli of 2.33–2.45 GPa and elongations at break of 11.7–13.2%, and exhibit high thermal stability and good resistance to organic solvents. Copyright © 2010 Society of Chemical Industry     

The absorption behavior and crystallization of poly(aryl ether ketone) films

The absorption and subsequent desorption behaviors of amorphous polymer films of PEEK poly(ether ether ketone), PEEKK poly(ether ether ketone ketone), and PEKK poly(ether ketone ketone) in solvent of 1,2-dichloroethane (C₂H₄Cl₂) are investigated and compared. The equilibrium absorption weight (M_∞) of these polymers is related to their molecular ketone content or molecular chain rigidity and also to the experimental conditions. Especially, at a certain temperature, the molecular chains in the solvent can be polarized, which leads to producing greater M_∞ for polymer films; for example, at 60°C, M_∞ = 46% for PEEK and M_∞ = 65% for PEKK. The pseudodiffusion coefficients for PEEK, PEEKK, and PEKK all surpass the 6.0 × 10⁻¹² m² s⁻¹. The polymer's molecular polarization has been proved in concentrated sulfur acid. Results also show that amorphous resin's films become white and creeped in dichloroethane, which is more serious when metaphenyl links are introduced into PEEKK or PEKK molecular main chains. The residual solvent of 1% or so often exists in the films, even though a long desorption time (over 100 h) has been proceeded. Absorption has induced crystallization of amorphous polymer films, but this crystallization process is slightly different from that of the films crystallized from both the glassy state and the melting state in the solvent, which makes the amorphous interlayers grow progressively and more condensely; thus, the crystallized films will have higher T_g's than these crystallized under annealing condition. The morphology results have shown that the solvent-crystallized films are less toughened than the amorphous ones because of the intermediate layer between the induced crystallized area and the amorphous area in the core. © 1998 John Wiley & Sons, Inc. J Appl Polym Sci 67:2065–2075, 1998     

Rheological and crystallization behaviors of low processing temperature poly(aryl ether ketone)

A new low melting temperature poly(aryl ether ketone) (PAEK) thermoplastic polymer (Victrex AE 250) was investigated through thermal and rheological analysis of films and flakes. DSC was assigned to evaluate the influence of cooling rate on crystallinity and thermal transitions. Rheometry was used to assess its flowing behavior through the evaluation of dynamic moduli and complex viscosity in the melted state. The relaxation times were found from the rheological curves: they are between a few ms to 200 ms for AE 250, lower than those found for PEEK 450, meaning a faster mobility of macromolecules. The thermal activation energy, E_a obtained from Time Temperature Superposition is the same for films and flakes in spite of a lower viscosity for flakes. The molecular weight between entanglements is evaluated at 8000 g.mol⁻¹ for FMc and 13,000 for FLc, it is compared to the value of about 2000 g.mol⁻¹ found for PEEK 450 with the same procedure. Also, the viscosity was compared to other commercial PAEK such as PEEK and PEKK based on data from the literature. This polymer appears very efficient to compete with high performance thermoplastics to be processed by compression molding, out of autoclave consolidation, additive manufacturing, and welding.     

Synthesis and characterization of poly(ether ketone ketone) (PEKK)/sodium sulfonated poly(arylene ether ketone) (S‐PAEK) block copolymers

A series of well‐defined poly(ether ketone ketone) (PEKK)/sodium sulfonated poly(aryl ether ketone) (S‐PAEK) block copolymers of high molecular weights was prepared by direct nucleophilic polymerization of hydroquinone with sodium 5,5′‐carbonylbis(2‐fluorobenzene sulfonate) ( 1 ) and PEKK oligomer ( 2 ). Varying the ratio of 1 to 2 used in polymerization can be used to control the degree of polymer sulfonation, which correspondingly affects the polymer solubility in solvents. Increasing content of 1 in the copolymers, slightly decreases their thermal stability which is nevertheless thermally stable up to 400 °C. Two T_g values, or one broad T_g, were observed in the DSC measurements of the block copolymers, indicating the existence of phase separation, which was further proved by phase‐separated morphologies as shown in atomic force microscopy images. © 2001 Society of Chemical Industry     

Morphology and dynamical mechanical properties of poly ether ketone ketone (PEKK) with meta phenyl links

Poly ether ketone ketone (PEKK) with different proportion of meta phenyl links were investigated by combining differential scanning calorimetry and dynamic mechanical analysis. The influence of the Terephthalyl/Isophthalyl isomers (T/I) ratio on the vitreous phase is mild, the shift of the glass transition is limited to a few degrees and the vitreous G′ is only sensitive to the content of the crystalline phase. Contrarily, the increase of meta isomers is responsible for a significant decrease of the melting temperature (T_m) by 60 °C, which considerably facilitates processing. The modification of interchain interactions in the crystalline phase might be implied. A series of thermal protocols evidenced that the difference of crystallization behavior is also dependent upon the T/I isomer ratio. A time and temperature dependence of annealing on the double melting behavior of PEKK was observed. Regarding the mechanical behavior, the observed reinforcing effect due to the crystalline phase was more prominent in the rubbery state than in the glassy state. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43396.     

Rheological properties of phenophthalein poly(ether ether ketone)

The rheological properties of the novel engineering thermoplastic phenophthalein poly(ether ether ketone) (PEK-C) have been investigated using both a rotational and a capillary rheometer. The dependence of the viscosity on the shear rate and temperature was obtained. The activation energy was evaluated both from the Arrhenius and the Williams-Landel-Ferry (WLF) equation. An estimate for the proper E_η (dependent only on the chemical structure of the polymer) has been found from the WLF equation at temperatures about T_g + 200°C. Measurements of the die swell have been performed. The first normal stress differences were evaluated from the die swell results and compared with the values obtained from the rotational rheometer at low shear rates.     

Improvement of the processability of poly(ether ketone ketone) by the addition of a thermotropic liquid crystalline polymer

The addition of a thermotropic liquid crystalline, wholly aromatic copolyester, TLCP, improved the melt processability of poly(ether ketone ketone), PEKK. The tensile strength and modulus of the blends also improved with increasing TLCP, but the elongation at break decreased significantly. The blends were phase‐separated, but the polymers were partially miscible as evident from shifts of the glass transition temperature (T_g) of each component towards that of the other component in the blend. Similarly, the melting points (T_m) of both components were depressed by blending. When the crystallization temperature was above T_m of the TLCP, the PEKK crystallization rate in the blend was slower than for the pure material, while crystallization was faster when the temperature was below T_m of the TLCP. Polym. Eng. Sci. 44:541–547, 2004. © 2004 Society of Plastics Engineers.     

Synthesis and properties of novel copolymers of poly(ether ketone diphenyl ketone ether ketone ketone) and poly(ether amide ether amide ether ketone ketone)

New monomers, 4,4′‐bis(4‐phenoxybenzoyl)diphenyl (BPOBDP) and N,N′‐bis(4‐phenoxybenzoyl)?4,4′‐diaminodiphenyl ether (BPBDAE), were conveniently synthesized via simple synthetic procedures from readily available materials. Novel copolymers of poly(ether ketone diphenyl ketone ether ketone ketone) (PEKDKEKK) and poly(ether amide ether amide ether ketone ketone) (PEAEAEKK) were synthesized by electrophilic Friedel‐Crafts solution copolycondensation of isophthaloyl chloride (IPC) with a mixture of BPOBDP and BPBDAE, over a wide range of BPOBDP/BPBDAE molar ratios, in the presence of anhydrous AlCl₃ and N‐methylpyrrolidone (NMP) in 1,2‐dichloroethane (DCE). The copolymers obtained were characterized by different physico‐chemical techniques. The copolymers with 10–40 mol% BPBDAE are semicrystalline and had remarkably increased T_gs over commercially available PEEK and PEKK due to the incorporation of amide and diphenyl linkages in the main chains. The copolymers IV and V with 30–40 mol% BPBDAE had not only high T_gs of 185–188°C, but also moderate T_ms of 326–330°C, having good potential for the melt processing. The copolymers IV and V had tensile strengths of 101.7–102.3 MPa, Young's moduli of 2.19–2.42 GPa, and elongations at break of 13.2–16.6% and exhibited high thermal stability and excellent resistance to organic solvents. POLYM. ENG. SCI., 54:1757–1764, 2014. © 2013 Society of Plastics Engineers     

Synthesis and properties of novel copolymers of poly(ether ketone ether ketone ketone) and poly(ether ketone ketone ether ketone ketone) containing 1,4‐naphthylene moieties

A new monomer, 1,4‐bis(4‐phenoxybenzoyl)naphthalene (BPOBN), was conveniently synthesized via a simple synthetic procedure from readily available materials. A series of novel copolymers of poly(ether ketone ether ketone ketone) and poly(ether ketone ketone ether ketone ketone) containing 1,4‐naphthylene moieties were prepared by the Friedel‐Crafts acylation solution copolycondensation of terephthaloyl chloride (TPC) with a mixture of BPOBN and 4,4′‐diphenoxybenzophenone (DPOBPN), over a wide range of BPOBN/DPOBPN molar ratios, in the presence of anhydrous AlCl₃ and N‐methylpyrrolidone in 1,2‐dichloroethane. The copolymers with 10–40% BPOBN are semicrystalline and had remarkably increased T_gs over the conventional PEEK and PEKK due to the incorporation of 1,4‐naphthylene moieties in the main chains. The copolymers with 30–40 mol% BPOBN had not only high T_gs of 176–177°C, but also moderate T_ms of 332–338°C, which are suitable for the melt processing. These polymers had tensile strengths of 101.5–104.7 MPa, Young's moduli of 2.49–2.65 GPa, and elongations at break of 13.3–15.7% and exhibited high thermal stability and excellent resistance to organic solvents. POLYM. ENG. SCI., 56:566–572, 2016. © 2016 Society of Plastics Engineers     

Effect of PEKK oligomers sizing on the dynamic mechanical behavior of poly(ether ketone ketone)/carbon fiber composites

Poly(ether ketone ketone) (PEKK)/unidirectional carbon fiber (CF) composites have a poor interface. Accordingly, PEKK oligomer (PEKKo) sizing with a chemical compatibility with PEKK is proposed for promoting interfacial interactions in order to enhance mechanical performances. The thermal stability until 500 °C has been shown by thermogravimetric analysis (TGA). In order to compare static and dynamic sizing methods, “lab sizing” and “pilot sizing” were carried out. Scanning electron microscopy images of freeze fractures of PEKK/unsized CF, PEKK/PEKKo lab-sized CF and PEKK/PEKKo pilot-sized CF show that the PEKKo sizing causes an improvement of fiber/PEKK interactions, regardless of the sizing method. Indeed, in both cases, there is a continuity of matter at the interface while we observe a poor wetting of CF by matrix in PEKK/unsized CF. Dynamic mechanical relaxations in shear were analyzed as a function of temperature. The increase of storage modulus upon sizing is observed for both methods but it is more important for PEKKo pilot sizing. In the same way, the mechanical energy loss increases, it reflects the optimization of stress transfer between matrix and fibers. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48818.     

Synthesis and characterization of poly(ether amide ether ketone)/poly(ether ketone ketone) copolymers

A new monomer, N,N′‐bis(4‐phenoxybenzoyl)‐m‐phenylenediamine (BPPD), was prepared by condensation of m‐phenylenediamine with 4‐phenoxybenzoyl chloride in N,N‐dimethylacetamide (DMAc). A series of novel poly(ether amide ether ketone) (PEAEK)/poly(ether ketone ketone) (PEKK) copolymers were synthesized by the electrophilic Friedel‐Crafts solution copolycondensation of terephthaloyl chloride (TPC) with a mixture of diphenyl ether (DPE) and BPPD, over a wide range of DPE/BPPD molar ratios, in the presence of anhydrous AlCl₃ and N‐methylpyrrolidone (NMP) in 1,2‐dichloroethane (DCE). The influence of reaction conditions on the preparation of copolymers was examined. The copolymers obtained were characterized by different physicochemical techniques. The copolymers with 10–25 mol % BPPD were semicrystalline and had remarkably increased T_gs over commercially available PEEK and PEKK due to the incorporation of amide linkages in the main chains. The copolymers III and IV with 20–25 mol % BPPD had not only high T_gs of 184–188°C, but also moderate T_ms of 323–344°C, having good potential for the melt processing. The copolymers III and IV had tensile strengths of 103.7–105.3 MPa, Young's moduli of 3.04–3.11 GPa, and elongations at break of 8–9% and exhibited outstanding thermal stability and good resistance to organic solvents. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Binary blends of metallocene polyethylene with conventional polyolefins: Rheological and morphological properties

The rheology and morphology of four sets of binary blends of polyethylene synthesized with metallocene catalysis (metallocene polyethylene: MCPE) with polyolefins prepared using Ziegler‐Natta catalysts have been investigated. The blend systems are MCPE with high density polyethylene (MCPE‐HDPE), polypropylene (MCPE‐PP), poly(propylene‐co‐ethylene) (MCPE‐CoPP), and poly(propylene‐co‐ethylene‐co‐1‐butylene) (MCPE‐TerPP). Cole‐Cole plots [storage melt viscosity (η′) versus loss melt viscosity (η″)], plots of the dynamic storage modulus (G′) versus the dynamic loss modulus (G″), and plots of the log melt viscosity (η*, η′, and η″) versus blend compositions were constructed. The morphology of the blends after microtoming and etching was studied. The phase morphology of MCPE‐HDPE appeared homogeneous, whereas the other three blends were heterogeneous. Rheological and morphological investigations indicated that the MCPE‐HDPE blend was miscible, but the other three blends were immiscible in the melt as well as in the solid state. These observations can be rationalized in terms of the similarity of the chemical structures of the polyolefins.     

Investigations of the practical routes,structure, and properties for poly(aryl ether ketone ketone) polymers

Different routes for preparing poly(aryl ether ketone)s (PEKKs) are presented and compared. The properties of PEKKs are related to the content of metaphenyl links in the molecular main chains, the molecular chain branching degree, the gelation content by molecular crosslinks, and, especially, the relative content of crystal form II to crystal form I of the PEKK polymorphism. When the molecular T/I ratio of 50/50 in the polymer chains is reached, the obtained PEKK has a lower melting point and gelation content (2% or so). The PEKKs prepared from the electronical substitution route (E route) often have a 0–30% content of crystal form II (relative to the mixed form I and form II), which is much more than that in PEKKs from the nucleophilic substitution route (N route, form II accounts for 0–20%). The relatively unstable crystal form II resulted in the unstable and difficultly predicted thermal properties of PEKKs. PEKKs from different routes provide samples with melting points from 360 to 397°C (T_m) and glassy transition temperatures (T_g) from 167 to 176°C and the equilibrium melting point of 411°C for para-PEKK, while the tensile strength of the homopolymer PEKK and copolymers of PEEKK (poly(aryl ether ether ketone ketone)–PEKK can reach 100 MPa prepared by the N route. The high T_g makes PEKK polymers practically useful while too high T_m and a very small difference between T_m and T_d (degradation temperature) produce obstacles to its wide application. The reaction mechanisms of both electrophilic and nucleophilic routes are investigated and discussed in detail. Results show that the molecular chain branched by solvents and monomers with many activated points may be partly reduced to some extent by the oligomer and extruding route. © 1998 John Wiley & Sons, Inc. J Appl Polym Sci 67: 659–677, 1998     

Enhancing resistance of poly(ether ketone ketone) to high-temperature steam through crosslinking and crystallization control

Poly(aryl ether ketone)s (PAEKs) are promising materials for harsh environments, such as in high-temperature steam applications. Here, the effect of high-temperature steam on the crystallinity and mechanical properties of existing poly(ether ether ketone) (PEEK) and PEKK(T/I) polymers is investigated. Differential scanning calorimetry (DSC), wide-angle X-ray scattering or diffraction (WAXD), and dynamic mechanical analysis experiments show these materials undergo significant crystallization and reorganization after prolonged exposure to steam and suffer from embrittlement. In addition, we show that xanthydrol-based crosslinks can provide the dimensional stability and stabilize the PEKK crystal structure. Mechanical tests demonstrate that the ductility is preserved for longer exposures to steam compared to neat PEKK, whereas DSC and WAXD data indicate xanthydrol crosslinks effectively stabilize the crystal structure against steam-assisted crystallization. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47727.     

Morphologies,Mechanical Properties and Wear of Poly(ether ketone ketone) (PEKK) and its Composites Reinforced with Mica

Poly(ether ketone ketone) (PEKK) composites were developed using mica as a filler. Sulfonated poly(ether ketone ketone) (S‐PEKK), a possible interfacial modifier, was coated on the mica surface with ca. 50 nm thickness, as observed by contact atomic force microscope (AFM). The morphologies of these materials were examined by scanning electron microscopy (SEM). In comparison with PEKK, significantly improved mechanical properties were obtained for the composite materials. With increasing content of mica in the materials, tensile modulus of the materials increased and ultimate elongation decreased. The composites containing 30 wt.‐% of mica exhibited a maximum tensile strength of about 200 MPa while pure PEKK showed a tensile strength of 102 MPa. The composites filled with mica treated by S‐PEKK displayed somewhat higher values of tensile strength and ultimate elongation than those generated using pure mica. The glass transition behavior and thermal stability of PEKK were not affected by the composition of the materials. The amount of mica used in the composites showed some influence on the coefficient of friction and wearing rate of these materials.     

Synthesis and properties of poly(aryl ether sulfone ether ketone ketone) (PESEKK)

4,4′‐bis(Phenoxy)diphenyl sulfone (DPODPS) was synthesized by reaction of phenol with bis(4‐chlorophenyl) sulfone in tetramethylene sulfone in the presence of NaOH. Two poly(aryl ether sulfone ether ketone ketone)s (PESKKs) with high molecular weight were prepared by low temperature solution polycondensation of DPODPS and terephthaloyl chloride (TPC) or isophthaloyl chloride (IPC), respectively, in 1,2‐dichloroethane and in the presence of aluminum chloride (AlCl₃) and N‐methylpyrrolidone (NMP). The resulting polymers were characterized by various analytical techniques, such as FT‐IR, ¹H‐NMR, DSC, TG, and WAXD. The results show that the T_g and T_d of PESEKKs are much higher, but its T_m is lower than those of PEKK. The other results indicate that PESEKKs exhibit excellent thermostabilities at 300 ± 10°C. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 96: 489–493, 2005     

Synthesis and properties of novel poly(aryl ether ketone)s containing imide linkages in the main chains

A new monomer containing imide linkages, bis[4-(p-phenoxybenzoyl)-1,2-benzenedioyl]-N,N,N′,N′-4,4′-diaminodiphenyl ether (BPBDADPE), was prepared by the Friedel–Crafts reaction of bis(4-chloroformyl-1,2-benzenedioyl)-N,N,N′,N′-4,4′-diaminodiphenyl ether (BCBDADPE) with diphenyl ether (DPE). Novel poly(aryl ether ketone)s containing imide linkages in the main chains (PEK-I) were synthesized by electrophilic Friedel–Crafts solution copolycondensation of terephthaloyl chloride (TPC) with a mixture of DPE and BPBDADPE. The polymers were characterized by different physico-chemical techniques. The polymers with 10–40 mol% BPBDADPE are semicrystalline and had increased T _gs over commercially available poly(ether ether ketone) (PEEK) and poly(ether ketone ketone) (PEKK) (70/30) due to the incorporation of imide linkages in the main chains. The polymers IV and V with 30–40 mol% BPBDADPE had not only high T _gs of 182–183 °C, but also moderate T _ms of 341–343 °C, having good potential for melt processing and exhibited high thermal stability and good resistance to common organic solvents.     

Influence of annealing on structure of poly(aryl ether ether ketone ketone) revealed by SAXS

Structural studies of poly(aryl ether ether ketone ketone) (PEEKK) using small-angle X-ray scattering and one-dimensional electron density correlation function methods revealed that its aggregated state structure was significantly influenced by the annealing temperature. The long period L, the average thickness of the lamellae d, the electron density difference between the crystalline and amorphous regions η_c − η_a, and the invariant Q increased with increasing annealing temperature, but it was opposite to the case of the specific inner surfaces O_s. A transition zone existed between the traditional “two phases” with a dimension about 0.5 nm for semicrystalline PEEKK. © 1998 John Wiley & Sons, Inc. J Appl Polym Sci 69: 1829–1835, 1998     

Synthesis and characterization of novel copolymers of poly(ether ketone ketone) and poly(ether ketone sulfone imide)

A new monomer containing sulfone and imide linkages, bis{4-[4-(p-phenoxyphenylsulfonylphenoxy)benzoyl]-1,2-benzenedioyl}-N,N,N′,N′-4,4′-diaminodiphenyl ether (BPSPBDADPE), was prepared by the Friedel–Crafts reaction of bis(4-chloroformyl-1,2-benzenedioyl)-N,N,N′,N′-4,4′-diaminodiphenyl ether with 4,4′-diphenoxydiphenyl sulfone. Novel copolymers of poly(ether ketone ketone) and poly(ether ketone sulfone imide) were synthesized by electrophilic Friedel–Crafts solution copolycondensation of terephthaloyl chloride with a mixture of DPE and BPSPBDADPE. The polymers were characterized by different physico-chemical techniques. The polymers with 10–25?mol% BPSPBDADPE are semicrystalline and had increased T _gs over commercially available PEEK and PEKK (70/30) due to the incorporation of sulfone and imide linkages in the main chains. The polymer IV with 25?mol% BPSPBDADPE had not only high T _g of 194?°C but also moderate T _m of 338?°C, having good potential for melt processing and exhibited high thermal stability and good resistance to common organic solvents.     

Synthesis and properties of poly(aryl ether ketone)s containing both biphenylene moieties and sulfone linkages in the main chain

Two monomers, 4,4′‐bis(4‐phenoxybenzoyl)biphenyl (BPOBBP) and 4,4′‐diphenoxydiphenyl sulfone (DPODPS), were conveniently synthesized via simple synthetic procedures from readily available materials. A series of novel poly(aryl ether ketone)s containing both biphenylene moieties and sulfone linkages in the main chain were synthesized by the modified electrophilic Friedel‐Crafts acylation copolycondensation of isophthaloyl chloride (IPC) with a mixture of BPOBBP and DPODPS, over a wide range of BPOBBP/DPODPS molar ratios. The resulting polymers were characterized by Fourier transform infrared spectroscopy (FT‐IR), wide‐angle X‐ray diffraction (WAXD), differential scanning calorimetry (DSC), and thermogravimetric analysis (TGA), etc. The results indicated that the copolymers with 30 to 35 mol% DPODPS were semicrystalline and had remarkably increased glass transition temperatures (T_gs) over the conventional poly(ether ether ketone) (PEEK) and poly(ether ketone ketone) (PEKK) due to the incorporation of biphenylene units and sulfone linkages in the main chain. The copolymers with 30 to 35 mol% DPODPS had not only high T_gs of 176 to 177°C, but also moderate melting temperatures (T_ms) of 334 to 337°C, having good potential for the melt processing. The semicrystalline copolymers II to V had tensile strengths of 99.8 to 103.1 MPa, Young's moduli of 2.26 to 2.79 GPa, and elongations at break of 16.8 to 26.5% and exhibited outstanding thermal stability and good resistance to organic solvents. POLYM. ENG. SCI., 55:2140–2147, 2015. © 2015 Society of Plastics Engineers