Influence of 1-ethyl-3-methylimidazolium bis (trifluoromethyl sulfonyl) imide plasticization on zinc-ion conducting PEO/PVdF blend gel polymer electrolyte

The influence in terms of plasticizer on zinc-ion conducting polymer blend electrolyte system, [PEO (90 wt%)/PVdF (10 wt%)]-15 wt% Zn (CF₃SO₃)₂] with various concentrations of 1-ethyl-3-methylimidazolium bis (trifluoromethylsulfonyl) imide (EMIMTFSI) was investigated. The freshly-prepared thin films of [PEO (90 wt%)/PVdF (10 wt%)]-15 wt% Zn (CF₃SO₃)₂)?+?x wt% EMIMTFSI, where x?=?1, 3, 5, 7, and 10 wt%] were characterized by means of X-ray diffraction (XRD), Fourier transformed infrared (FTIR), scanning electron microscopy (SEM), differential scanning calorimetry (DSC) and impedance analysis techniques. The room temperature XRD patterns tend to support the enhanced amorphous phase as a result of deducing the degree of crystallinity of the polymer blend–salt system by the addition of 7 wt% EMIMTFSI. The relevant SEM images of 7 wt% EMIMTFSI incorporated gel polymer electrolyte exhibit a minimised spheurilite structure when compared to that of the polymer blend–salt system. Unusually, the highest ionic conductivity realized in the case of the typical gel polymer electrolyte system, [PEO/PVdF-Zn (CF₃SO₃)₂ + 7 wt% EMIMTFSI] is found to be 1.63?×?10^?4 S cm^?1 at room temperature. The temperature dependence of conductivity has been examined based on the Vogel–Tammann–Fulcher (VTF) equation, thereby suggesting the segmental chain motion and free volume changes. The occurrence of ion dynamics and dielectric relaxation behaviour in the chosen system has been analysed in a detailed fashion at room temperature using frequency response impedance formalisms involving electric modulus and dielectric permittivity features.     

Facile and green synthesis of ZnO nanostructures in a room-temperature ionic liquid 1-hexyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide

Pure hexagonal phase of ZnO nanoparticles have been successfully synthesized via microwave assisted decomposition of zinc acetate precursor in a green solvent, the ionic liquid, 1-hexyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide in a very short time scale. The ZnO nanoparticles were characterized by powder X-ray diffraction, scanning electron microscopy, transmission electron microscopy, and selected area electron diffraction.     

Sputter-deposition of silver nanoparticles into ionic liquid as a sacrificial reservoir in antimicrobial organosilicate nanocomposite coatings

We present a new approach for fabricating robust, regenerable antimicrobial coatings containing an ionic liquid (IL) phase incorporating silver nanoparticles (AgNPs) as a reservoir for Ag(0)/Ag(+) species within sol-gel-derived nanocomposite films integrating organosilicate nanoparticles. The IL serves as an ultralow volatility (vacuum-compatible) liquid target, allowing for the direct deposition and dispersion of a high-density AgNP "ionosol" following conventional sputtering techniques. Two like-anion ILs were investigated in this work: methyltrioctylammonium bis(trifluoromethylsulfonyl)imide, [N(8881)][Tf(2)N], and 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide, [emim][Tf(2)N]. Silver ionosols derived from these two ILs were incorporated into silica-based sol-gel films and the resultant antimicrobial activity evaluated against Pseudomonas aeruginosa bacteria. Imaging of the surface morphologies of the as-prepared films established a link between an open macroporous film architecture and the observation of high activity. Nanocomposites based on [N(8881)][Tf(2)N] displayed excellent antimicrobial activity against P. aeruginosa over multiple cycles, reducing cell viability by 6 log units within 4 h of contact. Surprisingly, similar films prepared from [emim][Tf(2)N] presented negligible antimicrobial activity, an observation we attribute to the differing abilities of these IL cations to infiltrate the cell wall, regulating the influx of silver ions to the bacterium's interior.     

Studies on electrical double layer capacitor with a low-viscosity ionic liquid 1-ethyl-3-methylimidazolium tetracyanoborate as electrolyte

The performance of an electrical double layer capacitor (EDLC) composed of high surface area activated carbon electrodes and a new ionic liquid, 1-ethyl-3-methylimidazolium tetracyanoborate, [EMIm]TCB, as the electrolyte has been investigated by impedance spectroscopy, cyclic voltammetry and galvanostatic charge–discharge studies. The high ionic conductivity (~1·3 × 10^???2 S cm^???1 at 20 °C) and low viscosity (~22 cP) of the ionic liquid, [EMIm]TCB, make it attractive as electrolyte for its use in EDLCs. The optimum capacitance value of 195·5 F g^???1 of activated carbon has been achieved with stable cyclic performance.     

Wide electrochemical window at the interface between water and a hydrophobic room-temperature ionic liquid of tetrakis[3,5-bis(trifluoromethyl)phenyl]borate

Ionic liquids composed of a hydrophobic anion, tetrakis[3,5-bis(trifluoromethyl)phenyl]borate (TFPB-), and various aromatic and aliphatic ammonium have been prepared. TFPB salts of N-octadecylisoquinolinium (C18Iq+) and trioctylmethylammonium (TOMA+) show low melting points of 31 and 36 degrees C, respectively, whereas TFPB-based ionic liquids of 1-alkyl-3-methylimidazolium with the alkyl chain length of 5-12 show melting points lower than 90 degrees C. The [C(18)Iq][TFPB]|water (W) and [TOMA][TFPB]|W interfaces have the polarized potential window (ppw) of 0.8 V at 56 degrees C, which is twice as wide as the ppw at the interface between W and room-temperature ionic liquids of bis(perfluoroalkylsulfonyl)imide so far reported. The extension of the ppw by more than 0.4 V to the positive direction enables voltammetric measurements of the ion transfer of relatively hydrophobic anions such as bis(trifluoromethylsulfonyl)imide and bis(pentafluoroethylsulfonyl)imide and of hydrophilic cations such as tetraethylammonium and acetylcholine ions.     

Viscosity of Imidazolium-Based Ionic Liquids at Elevated Pressures: Cation and Anion Effects

The viscosity of imidazolium-based ionic liquids with four different cations and three different anions was measured to pressures of 126 MPa and at three temperatures (298.15 K, 323.15 K, and 343.15 K). The high-pressure viscosity of 1-ethyl-3-methylimidazolium ([EMIm]), 1-n-hexyl-3-methylimidazolium ([HMIm]), and 1-n-decyl-3-methylimidazolium ([DMIm]) cations with a common anion, bis(trifluoromethylsulfonyl)imide ([Tf₂N]), was measured to determine the alkyl-chain length effect of the cation. An increase in the alkyl-chain length increased the viscosity at elevated pressures. [DMIm] exhibited a larger nonlinear increase with pressure over the shorter alkyl substituents. Anion effects were investigated with [HMIm] as a common cation and anions of [Tf₂N], hexafluorophosphate ([PF₆]), and tetrafluoroborate ([BF₄]). [HMIm][PF₆], with the highest viscosity, demonstrated a very nonlinear pressure dependence even at relatively moderate pressures (to 30 MPa), similar to the results for [BMIm][PF₆]. A combined Litovitz and Tait equation was utilized to describe the viscosity of the ionic liquids with pressure and temperature and demonstrated good correlation with the experimental data.     

Direct-on-barrier copper electroplating on ruthenium from the ionic liquid 1-ethyl-3-methylimidazolium dicyanamide

The "direct-on-barrier" electroplating of copper on ruthenium from a 1 mol dm⁻³ solution of CuCl in the ionic liquid 1-ethyl-3-methylimidazolium dicyanamide, [C₂mim][N(CN)₂], is reported. Continuous layers of copper with a preferential Cu(111) orientation were obtained from this electrolyte. The copper coatings were investigated by top view scanning electron microscopy (SEM), X-ray diffraction (XRD), and focused ion beam transmission electron microscopy (FIB-TEM). The nucleation density was both theoretically and experimentally evaluated by the Scharifker-Hills model and transmission electron microscopy, respectively. The direct plating of copper on resistive substrates for advanced interconnects and package is a promising new application of ionic liquids.     

Polymer Sensitized Quasi Solid-State Photovoltaic Cells Using Derivatives of Polythiophene

Substituted thiophene sensitized, nanocrystalline TiO2-based quasi solid-state solar cells were fabricated by using either poly （3-thiophene acetic acid） （P3TAA） or a copolymer with poly （3-thiophene acetic acid）-poly （hexyl thiophene） （P3TAA-PHT） polymers and copper iodide （Cul） as a hole conducting material together with an ionic liquid 1-ethyl-3-methylimidazolium bis （trifluoromethylsulfonyl） amide and lithium bis （triflu- oromethanesulfone） imide as additives for charge transport promotion. Dramatic enhancements in the cell performances were observed with the additives in Cul. While the cell sensitized with P3TAA generated a short-circuit photocurrent of -1.45 mA.cm^-2, an open-circuit photovoltage of -345 mV with a total power conversion efficiency of -0.3% under simulated full sunlight of 100 mW-cm^-2 （air mass： 1.5）, the cell sensitized with copolymer P3TAA-PHT delivered -0.25% efficiency under the same conditions with -1.23 mA-cm^-2 as photocurrent and -371 mV as photovoltage.     

All-solid-state flexible supercapacitors based on papers coated with carbon nanotubes and ionic-liquid-based gel electrolytes

All-solid-state flexible supercapacitors were fabricated using carbon nanotubes (CNTs), regular office papers, and ionic-liquid-based gel electrolytes. Flexible electrodes were made by coating CNTs on office papers by a drop-dry method. The gel electrolyte was prepared by mixing fumed silica nanopowders with ionic liquid, 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([EMIM][NTf(2)]). This supercapacitor showed high power and energy performance as a solid-state flexible supercapacitor. The specific capacitance of the CNT electrodes was 135 F g(-1) at a current density of 2 A g(-1), when considering the mass of active materials only. The maximum power and energy density of the supercapacitors were 164 kW kg(-1) and 41 Wh kg(-1), respectively. Interestingly, the solid-state supercapacitor with the gel electrolyte showed comparable performance to the supercapacitors with ionic-liquid electrolyte. Moreover, the supercapacitor showed excellent stability and flexibility. The CNT/paper- and gel-based supercapacitors may hold great potential for low-cost and high-performance flexible energy storage applications.     

Preparation and characterization of zirconia and mixed zirconia/titania in ionic liquids

Zirconia and mixed zirconia/titania were synthesized in two different ionic liquids, namely, 1-butyl-1-methylpyrrolidinium bis(trifluoromethylsulfonyl) amide ([BMP]TFSA) and 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl) amide ([EMIm]TFSA) using sol–gel methods. The synthesized oxides were characterized by means of X-ray diffraction, scanning electron microscopy with energy dispersive X-ray (SEM-EDX)), thermogravimetric and differential thermal analyses (TGA–DTA). The results show that the as-synthesized ZrO₂ powders obtained either in [BMP]TFSA or in [EMIm]TFSA show amorphous behaviour, and calcination at 500 °C yields t-ZrO₂ which is subject to further phase transformation to m-ZrO₂ at 1000 °C. The type of the ionic liquid influences the morphology of the synthesized zirconia as the sample obtained from [BMP]TFSA showed a porous morphology with very fine particles in the nanometer regime, whereas micro-rods were obtained from [EMIm]TFSA. ZrO₂-TiO₂ nanorods with an average diameter of about 100 nm were synthesized in [EMIm]TFSA. The presence of zirconia in the mixed oxides stabilizes the anatase phase and elevates the temperature at which the phase transformation to rutile occurs.     

Thermal Conductivity of Ionic Liquids: Measurement and Prediction

This study reports thermal-conductivity data for a series of [EMIM] (1-ethyl-3-methylimidazolium)-based ionic liquids (ILs) having the anions [NTf₂] (bis(trifluoromethylsulfonyl)imide), [OAc] (acetate), [N(CN)₂] (dicyanimide), [C(CN)₃] (tricyanomethide), [MeOHPO₂] (methylphosphonate), [EtSO₄] (ethylsulfate), or [OcSO₄] (octylsulfate), and in addition for ILs with the [NTf₂]-anion having the cations [HMIM] (1-hexyl-3-methylimidazolium), [OMA] (methyltrioctylammonium), or [BBIM] (1,3-dibutylimidazolium). Measurements were performed in the temperature range between (273.15 and 333.15) K by a stationary guarded parallel-plate instrument with a total measurement uncertainty of 3 % (k = 2). For all ILs, the temperature dependence of the thermal conductivity can well be represented by a linear equation. While for the [NTf₂]-based ILs, a slight increase of the thermal conductivity with increasing molar mass of the cation is found at a given temperature, the [EMIM]-based ILs show a pronounced, approximately linear decrease with increasing molar mass of the different probed anions. Based on the experimental data obtained in this study, a simple relationship between the thermal conductivity, molar mass, and density is proposed for the prediction of the thermal-conductivity data of ILs. For this, also densities were measured for [EMIM][OAc], [EMIM][C(CN)₃], and [HMIM][NTf₂]. The mean absolute percentage deviation of all thermal-conductivity data for ILs found in the literature from the proposed prediction is about 7 %. This result represents a convenient simplification in the acquisition of thermal conductivity information for the enormous amount of structurally different IL cation/anion combinations available.     

1-己基-3-甲基咪唑六氟磷酸盐离子液体的微波辅助合成与结构表征

采用1-溴代己烷和N-甲基咪唑为原料,微波辅助快速合成了溴化1-己基-3-甲基咪唑([HMIM]Br)中间体,此步反应产率可达到95%。通过将中间体和六氟磷酸钾进行离子交换,制备了离子液体1-己基-3-甲基咪唑六氟磷酸盐([HMIM]PF6),产率约为48%。与传统方法相比,反应时间极大地缩短。产物的结构经傅立叶变换红外光谱(FT-IR)、超导脉冲傅立叶变换核磁共振氢谱(1HNMR)和超导脉冲傅立叶变换核磁共振碳谱(13CNMR)确认,纯度经高效液相色谱法(HPLC)分析达到99.0%以上。     

Composite electronic materials based on poly(3,4-propylenedioxythiophene) and highly charged poly(aryleneethynylene)-wrapped carbon nanotubes for supercapacitors

Supercapacitor charge storage media were fabricated using the semiconducting polymer poly(3,4-propylenedioxythiophene) (PProDOT) and single-walled carbon nanotubes (SWNTs) that were helically wrapped with ionic, conjugated poly[2,6-{1,5-bis(3-propoxysulfonicacidsodiumsalt)}naphthylene]ethynylene (PNES). These PNES-wrapped SWNTs (PNES-SWNTs) enable efficient dispersion of individualized nanotubes in a wide range of organic solvents. PNES-SWNT film-modified Pt electrodes were prepared by drop casting PNES-SWNT suspensions in MeOH; high stability, first-generation PProDOT/PNES/SWNT composites were realized via electropolymerization of the ProDOT parent monomer (3,4-propylenedioxythiophene) in a 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide/propylene carbonate solution at the PNES-SWNT-modified electrode. The electrochemical properties of PProDOT and PProDOT/PNES/SWNT single electrodes and devices were examined using cyclic voltammetric methods. The hybrid composites were found to enhance key supercapacitor figures of merit (charge capacity and capacitance) by approximately a factor of 2 relative to those determined for benchmark Type I devices that exploited a classic PProDOT-based electrode material. The charge/discharge stability of the supercapacitors was probed by repeated rounds of cyclic voltammetric evaluation at a minimum depth of discharge of 73%; these experiments demonstrated that the hybrid PProDOT/PNES/SWNT composites retained ~90% of their initial charge capacity after 21,000 charge/discharge cycles, contrasting analogous data obtained for PProDOT-based devices, which showed only 84% retention of their initial charge capacity.     

Sol–gel synthesis of vanadium pentoxide nanoparticles in air- and water-stable ionic liquids

Vanadium pentoxide (V₂O₅) nanoparticles were synthesized at moderate reaction temperatures by hydrolysis of VO[OCH(CH₃)₂]₃ in two different air- and water-stable ionic liquids with the same anion: 1-butyl-1-methyl pyrrolidinium bis(trifluoromethylsulfonyl)amide ([Py_1,4]Tf₂N) and 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)amide ([EMIM]Tf₂N) via the sol–gel method using acetone and isopropanol either as refluxing solvents or as co-solvents. The cation type of the ionic liquid affects the crystallinity, morphology, and surface area of the produced nanoparticles: [Py_1,4]Tf₂N gave products with higher crystallinity especially with acetone as a refluxing and co-solvent, while [EMIM]Tf₂N gave a clear mesoporous morphology with isopropanol as a refluxing solvent. Ionic liquids affect the key factors (morphology and surface area) that make V₂O₅ an attractive material as catalyst and/or cathodic material for lithium ion batteries.     

1，3-双（叠氮乙酰氧基）-2-乙基-2-硝基丙烷的合成与性能

以2-乙基-2-硝基-1,3-丙二醇为原料,经酯化、叠氮化两步反应,合成出了1,3-二(叠氮乙酰氧基)-2-乙基-2-硝基丙烷(ENPEA),总收率为83%。利用红外光谱、核磁共振、元素分析对ENPEA的结构进行了表征。探讨了叠氮化反应的影响因素,确定其最佳反应条件为:n(Na N3)n(ENPE)为2.21.0,混合溶剂中水占总体积的13%~20%,反应时间2 h;性能测试得到ENPEA的玻璃化转变温度为-43.4℃,热分解峰温为252.4℃,密度为1.34 g/cm3,特性落高为120.2 cm(落锤2 kg),爆炸概率为4%(摆角66°)。     

Infrared and Raman spectral signatures of aromatic nitration in thermoplastic urethanes

The spectral signatures of nitro attack of the aromatic portion of thermoplastic urethanes (TPU) were determined. Eight fragment molecules were synthesized that represent the nitrated and pristine methylenediphenyl section common to many TPUs. Infrared (IR) and Raman (785 nm illumination) spectra were collected and modeled using the B3LYP/6-31G(d)//B3LYP/6-31G(d) model chemistry. Normal mode animations were used to fully assign the vibrational spectra of each fragment. The vibrational assignment was used to develop a diagnostic method for aromatic nitro attack in thermoplastic urethanes. The symmetric NO(2) stretch coupled out of phase with the C-NO(2) stretch (1330 cm(-1)) was found to be free from spectral interferences. Spectral reference regions that enable correction for physical differences between samples were determined. The carbonyl stretch at 1700 cm(-1) was the best IR reference region, yielding a limit of quantitation (LOQ) of 0.66 +/- 0.02 g N/100 g Estane. Secondary IR reference regions were the N-H stretch at 3330 cm(-1) or the urethane nitrogen deformation at 1065 cm(-1). The reference region in the Raman was a ring stretching mode at 1590 cm(-1), giving an LOQ of 0.69 +/- 0.02 g N/100 g Estane. Raman spectroscopy displayed a larger calibration sensitivity (slope = 0.110 +/- 0.004) than IR spectroscopy (slope = 0.043 +/- 0.001) for nitration determination due to the large nitro Raman cross-section. The full spectral assignment of all eight molecules in the infrared and Raman is presented as supplemental material.     

Magnetic Properties of a Nitronyl Nitroxide Triradical as a Model for Single-Component Molecule-Based Ferrimagnets

IR and Raman spectra of neutral iodine substituted electron donors DIET, DIEDO and DIETS were measured. Their fundamental vibrational modes were calculated and compared with the experimental data. Additionally, we studied IR and Raman spectra of 2:1 charge-transfer salts formed by these donors with paramagnetic [Fe(bpca)(CN)₃] anions. Polarized IR reflectance spectra of DIET and DIEDO salts were also recorded.     

Ion Exchange Gels Allow Organic Electrochemical Transistor Operation with Hydrophobic Polymers in Aqueous Solution

Conjugated-polymer-based organic electrochemical transistors (OECTs) are being studied for applications ranging from biochemical sensing to neural interfaces. While new polymers that interface digital electronics with the aqueous chemistry of life are being developed, the majority of high-performance organic transistor materials are poor at transporting biologically relevant ions. Here, the operating mode of an organic transistor is changed from that of an electrolyte-gated organic field-effect transistor (EGOFET) to that of an OECT by incorporating an ion exchange gel between the active layer and the aqueous electrolyte. This device works by taking up biologically relevant ions from solution and injecting more hydrophobic ions into the active layer. Using poly[2,5-bis(3-tetradecylthiophen-2-yl) thieno[3,2-b]thiophene] as the active layer and a blend of an ionic liquid, 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide, and poly(vinylidene fluoride-co-hexafluoropropylene) as the ion exchange gel, four orders of magnitude improvement in device transconductance and a 100-fold increase in kinetics are demonstrated. The ability of the ion-exchange-gel OECT to record biological signals by measuring the action potentials of a Venus flytrap is demonstrated. These results show the possibility of using interface engineering to open up a wider palette of organic semiconductors as OECTs that can be gated by aqueous solutions.     

Phase Behavior of N2O and CO2 in Room-Temperature Ionic Liquids [bmim][Tf2N], [bmim][BF4], [bmim][N(CN)2], [bmim][Ac], [eam][NO3], and [bmim][SCN]

The gas solubility of nitrous oxide (N₂O) in room-temperature ionic liquids, 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide, 1-butyl-3-methylimidazolium tetrafluoroborate, 1-butyl-3-methylimidazolium dicyanamide, 1-butyl-3-methylimidazolium acetate, 1-butyl-3-methylimidazolium thiocyanate, and ethylammonium nitrate has been measured at isothermal conditions from about (283 to 348)K using a gravimetric microbalance. The observed pressure–temperature composition (PTx) data have been analyzed by use of a generic Redlich-Kwong equation-of-state (EOS) model, which has been successfully applied in our previous works. The interaction parameters have been determined using our measured vapor–liquid equilibrium data. Vapor–liquid–liquid equilibrium measurements have been made and validate EOS model predictions which suggest that these systems demonstrate Type III and Type V phase behavior, according to the classification of van Konynenburg and Scott. The global phase behavior of N₂O has also been compared with both the measured data from this study and literature data for carbon dioxide (CO₂) in each ionic liquid and Henry’s law constants are compared at room temperature (298.15 K).     

Electrical Conductivity and Viscosity of 1-Hexyl-3-methylimidazolium Bis(trifluorosulfonyl)imide, [C<Subscript>6</Subscript>mim] [(CF<Subscript>3</Subscript>SO<Subscript>2</Subscript>)<Subscript>2</Subscript>N] (CAS-RN# 382150-50-7)

The electrical conductivity and viscosity of 1-hexyl-3-methylimidazolium bis(trifluorosulfonyl)imide, [C₆mim] [(CF₃SO₂)₂N], were measured at atmospheric pressure, between 270 K and 350 K, for samples with an amount of water not exceeding 200 ppm, as part of International Union of Pure and Applied Chemistry Project 2002-005-1-100. Water content was monitored before and after measurements, by coulometric Karl–Fisher titration. Special care was taken with ionic liquid manipulation in view of the measurement uncertainty budget. The uncertainties of the electrical conductivity measurements and of the viscosity measurements are estimated to be better than 2.0 % and 0.5 %, respectively. Results were compared with data from other authors, and all data were correlated as a function of temperature.