Studies on Rat Liver Glutamine Synthetase

Rat liver glutamine synthetase is activated by Mg⁺⁺ and by Mn⁺⁺. Optimal activity of the Mg⁺⁺ activated synthetase occurred at about pH 7.8. The pH optimum of the Mn⁺⁺ activated enzyme varied from 6.2 at low Mn⁺⁺concentrations to 4.4 at high Mn⁺⁺concentrations. α-N-Ethyl-L-glutamine inhibits the synthetase activity. The inhibition is of a mixed type. The synthetase is also inhibited, to a lesser degree, by α-N-propyl-L-glutamine but not by α-N-butyl-L-glutamine.     

Copper(II)-catalyzed lipid peroxidation in liposomes and erythrocyte membranes

Cu⁺⁺ was uniquely capable of catalyzing the peroxidation of rat erythrocyte membrane lipid in the presence of 10 mM H₂O₂, whereas several other transition metal ions were without significant effect. In contrast, peroxidation of soybean phospholipid liposomes could be catalyzed with decreasing efficiency by Co⁺⁺, Cu⁺⁺, Pb⁺⁺, or Cr⁺⁺⁺ also in the presence of H₂O₂. The effect of imidazole on Cu⁺⁺-catalyzed lipid peroxidation was stimulatory in liposomes and inhibitory in membrane preparations, whereas EDTA, histidine, citrate and alanine inhibited peroxidation in both systems. EDTA could stop the peroxidation after initiation, but catalase could not, indicating that Cu⁺⁺ alone was necessary for the propagation of the chain reaction. Competitive inhibition studies with various scavengers of hydroxyl radicals or singlet oxygen and the absence of significant reaction enhancement by D₂O indicated that neither of these reactive oxygen species was a major mediator in the Cu⁺⁺-H₂O₂ oxidative system. A copper-oxygen complex may be directly involved in the initiation of peroxidation. Normal erythrocyte membranes and phospholipid liposomes also differ in their sensitivities toward external oxidative stress. In the absence of H₂O₂, Cu⁺⁺ (0.2 mM) was capable of catalyzing lipid peroxidation in liposomes, aged erythrocyte membranes and membranes from vitamin-E-deficient rats; however, freshly prepared membranes from control rats and liposomes containing α-tocopherol required H₂O₂ greater than 2 mM for the catalytic effect of Cu⁺⁺ to be observed.     

Metabolic studies in isolated rat liver cells: I. Lipid synthesis

Rat liver cells, isolated by chelate perfusion and extrusion through a tissue press, incorporated labeled acetate into cellular lipids and into lipids released into the suspending medium. Optimal rates of incorporation required supplementation of tris-KCl medium with Mg⁺⁺, Mn⁺⁺, succinate, citrate, nicotinamide, Coenzyme A, NADP and glucose-6-phosphate. The rate of acetate incorporation was markedly altered by changes in incubation media; tris-KCl was the most effective buffer. All the major classes of cellular lipids were labeled. ATP, BSA, inorganic phosphate, Ca⁺⁺, 2,4-dinitrophenol and sodium clofibrate were potent inhibitors of acetate incorporation. When added to the incubation mixture, several hormones altered the rate of acetate incorporation into lipids.     

The preparation of an immobilised glucose isomerase II. Immobilisation and properties of the immobilised enzyme

Glucose isomerase ex Lactobacillus brevis was successfully immobilised on microcrystalline cellulose, using the transition metal-link method. Immobilisation could be performed over a pH range of 5 to 9, and usually resulted in an apparent specific activity increase. The immobilised glucose isomerase generally displayed properties similar to those of the soluble enzyme, with the exception of the following differences:

• (i) a pH optimum at pH = 6, an acid shift of 0.5 units on immobilisation;
• (ii) an optimum reaction temperature at 50 °C, lower than that for the soluble enzyme;
• (iii) on incubation at 4 °C, a retention of 53% of the initial specific activity, when stored in 0.02 M, pH = 7, Tris buffer, after 8 weeks, compared with an apparent activation of the soluble enzyme after 10 and 19 weeks' storage.

Storage properties of the immobilised enzyme at 4 °C in Tris were apparently improved by the presence of Mn⁺⁺ and Co⁺⁺, although associated with some protein release. Storage at 4 °C in water alone, as opposed to Tris, resulted in a more rapid activity loss.     

Studies of selective adsorption resin. XXIV. Preparation and properties of macroreticular chelating resins containing both polyethylenepolyamine side chains and mercapto groups

The macroreticular chelating resins containing both polyethylenepolyamine side chains and mercapto groups were prepared by the reaction of 2,3-epithiopropyl methacrylate-divinylbenzene macroreticular copolymer beads with polyethylene-polyamine. The adsorption behavior of metal ions on the obtained resins was then investigated. The amination of the macroreticular copolymer beads could effectively be carried out by treatment of the polymer beads with polyethylenepolyamine in organic solvent (benzene, terahydrofuran) or in the absence of organic solvent at 80°C or 100°C for 60 min. It was found that the adsorption capacity of the resins for metal ions is not only affected by the ion exchange capacity of the resins but also by the porosity of the resins. Hg²⁺, Ag⁺, and Cu²⁺ were effectively adsorbed on the resins even at a pH below 3, whereas Co²⁺, Ni²⁺, and Cd²⁺ were adsorbed at a pH above 3, Mn²⁺ at a pH above 7, and Ca²⁺ at a pH above 8. These metal ions adsorbed on the resins could easily be eluted with dilute mineral acid solution or dilute mineral acid solution containing thiourea.     

Preparation of aminoalkyl celluloses and their adsorption and desorption of heavy metal ions

Aminoalkyl celluloses (AmACs) were prepared from 6-chlorodeoxycellulose and aliphatic diamines H₂N(CH₂)_mNH₂ (m = 2, 4, 6, 8). Their adsorption and desorption of divalent heavy metal ions such as Cu²⁺, Mn²⁺, Co²⁺, Ni²⁺ and their mixtures were also investigated in detail. Adsorption of metal ions on AmACs was remarkably affected by the pH of the solution, the metal ion and its initial concentration, and also the number of methylene units in the diamines. No adsorption of metal ions occurred on AmACs in strongly acidic solutions. However, metal ions were adsorbed rapidly on AmACs from weakly acidic solutions and the amount of adsorption increased with increasing pH. The effectiveness of AmACs as adsorbents decreased with increasing length of the methylene moiety, and AmACs from ethylenediamine (m = 2) was most effective. The adsorption of metal ions on AmACs was in the order Cu²⁺ > Ni²⁺ > Co²⁺ > Mn²⁺. Accordingly, their behavior followed the Irving-Williams series and Cu²⁺ ions were preferentially adsorbed from solutions containing metal ion mixtures. The adsorbed ions were easily desorbed from the AmACs by stirring in 0.1 M HCl.     

Metabolism of lysophosphatidylcholine by swine platelets

Incubation of intact platelets from Sinclair(S-1) miniature swine with³²P-labeled lysophosphatidylcholine (lyso PC) indicated the presence of an active lysophospholipase with a pH optimum of 8.0 for hydrolysis of the substrate. However, lyso PC was incorporated into the membrane phosphatidylcholines by the acyltransferase pathway upon addition of ATP, Mg⁺⁺ and CoA to the platelet suspension. These results suggest that intact platelets are able to resist the cytotoxic effects of lyso PC in plasma, and the phospholipids in platelet membranes are not readily affected by the lipid environment of the plasma. The acyltransfer reaction apparently is saturated with endogenous free fatty acids since arachidonic acid added exogenously did not further enhance the incorporation activity. Neither the acyltransferase nor the lysophospholipase activity was affected by Ca⁺⁺, but divalent metal ions such as Zn⁺⁺ inhibited the lysophospholipase activity. Cholesterol but not cholesteryl esters elicited a biphasic effect on both enzymes, stimulating at low concentration but inhibiting at a cholesterol to lyso PC ratio greater than 1. Serum albumin inhibited the lysophospholipase but gave a small biphasic effect to the acyltransferase.     

Metal ion catalysis of autoxidation in a lard gel

The prooxidant effects of transition metal compounds upon lard triglycerides in an aqueous heterogeneous model system were examined. Catalytic activity of a metal salt depended on its identity, the phase in which it is dissolved, the buffering salts and pH of the system. The iron and copper inorganic salts dissolved in the aqueous phase were powerful catalysts. Other transition metal salts had little positive effect on autoxidation at acid and neutral pH values. Manganous chloride had an inhibiting action. Freeze-drying reversed catalysis patterns, and Mn⁺⁺ and Co⁺⁺ became the strongest prooxidants. Cobaltous and manganese stearates were the most active of such compounds. Reversals in catalytic activity were due to the formation or disappearance of aquo ions. One of 28 papers presented at the Symposium “Metal-Catalyzed Lipid Oxidation,” presented at the ISF-AOCS World Congress, Chicago, September 1970. E. Market. Nutr. Res. Div., ARS, USDA.     

Synthetic resins. XX. Chelation ion exchange properties of resins derived from semicarbazone of 2-hydroxy acetophenone-substituted benzoic acid–formaldehyde

A number of resins have been synthesized by reacting orthohydroxy acetophenone-semicarbazone with substituted benzoic acid and formaldehyde in the presence of some acid and basic catalyst. The physicochemical properties of the resins have been reported. The ion exchange properties of the resins have been investigated. Influence of electrolytes on the metal uptake of Cu²⁺, Ni²⁺, Zn²⁺, Mg²⁺, and Mn²⁺ has been studied. The distribution of metal ions at different pH has also been reported. © 1992 John Wiley & Sons, Inc.     

An efficient far-red emission Sr2InSbO6:Mn4+, M (M = Li+, Na+, and K+) phosphors for plant cultivation LEDs

High-efficiency and far-red light phosphors based on Mn⁴⁺-doped inorganic luminescence materials are beneficial to plant cultivation. However, Mn⁴⁺-doped oxide phosphors have a common problem of low quantum efficiency. Alkali metal ion codoping can effectively improve the luminescence properties of Mn⁴⁺-activated oxide phosphors. Herein, a series of Sr₂InSbO₆:Mn⁴⁺, M (SISO:Mn⁴⁺, M) (M = Li⁺, Na⁺, and K⁺) far-red-emitting phosphors codoped alkali metal ions were first synthesized. Density functional theory calculation indicated that SISO is a kind of indirect bandgap material with a bandgap of ∼1.60 eV. The SISO:Mn⁴⁺ samples showed a far-red light at 698 nm upon 365 nm, which perfectly matched the absorption spectrum of the far-red-phytochrome (Pfr) of plants. The doping concentration of the SISO:Mn⁴⁺ samples was optimized to be 0.006 mol. The concentration quenching mechanism was defined as dipole–dipole interaction by combining the Dexter theory and the Inokuti–Hirayama model. Optimizing the sintering temperature and codoped with alkali metal ions (Li⁺, Na⁺, and K⁺) could improve the luminescent intensity of SISO:Mn⁴⁺. The optimum sintering temperature was 1300°C. The internal quantum efficiencies of SISO:0.006Mn⁴⁺ and SISO:0.006Mn⁴⁺, 0.006Li⁺ phosphors are 22.67% and 60.56%, respectively. SISO:Mn⁴⁺, Li⁺ phosphors-based plant growth light-emitting diodes (LEDs) demonstrate excellent optical stability and long lifetime. Thus, these phosphors are promising candidates for plant cultivation LEDs.     

Effect of adding other metal ions on the removal of Cd2+ by the CoAlPO4‐5/polysulfone membrane

Based on our previous work, performance of separation of Cd²⁺ by the CoAlPO₄‐5/polysulfone membrane was not as good as that of the other metal ions. This could be significantly improved by the addition of other metal ions into the Cd²⁺ solution. The metal ions added were those with larger hydrated radius than that of Cd²⁺. When Mg²⁺ and Ca²⁺ were added, the rejection rate of Cd²⁺ could be increased from about 50% ([Cd²⁺] = 50 ppm) to nearly 100% and the rate would increase with concentration of Mg²⁺ and Ca²⁺. However, when the added ions were Fe²⁺ and Mn²⁺, although the performance of Cd²⁺ removal was still high, the rejection rate would inversely decrease with increasing concentration of Fe²⁺ and Mn²⁺. These phenomena were mainly attributable to the effect of hydrated ion and the effect of lowered pH value induced by the hydrolysis of the solution. As to the addition of Al³⁺, although the rejection rate would decrease with increasing Al³⁺ concentration up to 100 ppm, an abrupt increase was observed at 150 ppm, which was thought to be attributable to the concentration polarization effect caused by the formation of the high valence [Al_n(OH)_m]^{(3[supi]n?[supi]m)+} complex. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 2172–2177, 2002     

The removal of copper,cadmium, and lead ions from dilute aqueous solutions using foam fractionation

The removal of copper, lead and cadmium ions from aqueous solution by foam fractionation using sodium dodecylbenzene sulphonate (NaDBS) has been experimentally studied and theoretically predicted for solutions with a pH less than 4. A mathematical model of the system consisting of the equilibrium relations of chemical reactions occurring in the system was solved for the equilibrium concentration of all ions in the solution. Based on this equilibrium concentration and the effective radius of the hydrated ion, a modified theory of the Gouy-Chapman diffuse double layer⁽⁹⁾ was used to predict the distribution factor of the metal ions. The work was extended to systems containing two metal ions for the determination of the separability of the ions with respect to each other. It was found that the distribution factor for solutions containing one metal ion could be predicted theoretically for a bulk solution pH less than four. Deviation of results above this pH was attributed to the limitations of the bulk solution reaction model because it did not include reactions for the formation of poly hydroxyl and poly nuclear hydroxyl complexes. Good agreement was also obtained between experiment and theory in the separability study. The results indicate that the order of removal of the ions from solution is Pb⁺⁺ > Cd⁺⁺ > Cu⁺⁺. This sequence is the reverse order of the effective radii of the hydrated ions. The results support the fact that the mechanism for removal of the ions from solution is that of electrical attraction and that selectivity depends upon the charge and size of the hydrated ion.     

Magnesium ferrite nanoparticles as a magnetic sorbent for the removal of Mn2+, Co2+, Ni2+ and Cu2+ from aqueous solution

The aim of this research was to prepare magnesium ferrite (MgFe₂O₄) magnetic nanoparticles and to investigate their sorption characteristics towards Mn²⁺, Co²⁺, Ni²⁺, Cu²⁺ ions in aqueous solution. MgFe₂O₄ was synthesized by glycine-nitrate combustion method and was characterized by low crystallinity with crystallite size of 8.2?nm, particle aggregates of 13–25?nm, BET surface area of 14?m²/g and pore size of 8.0?nm. Sorption properties of MgFe₂O₄ towards Mn²⁺, Co²⁺, Ni²⁺, Cu²⁺ ions were studied using one-component model solutions and found to be dependent on metal ions concentration, contact time, pH and conditions of regeneration experiment. The highest sorption capacity of MgFe₂O₄ was detected towards Co²⁺ (2.30?mmol?g¹) and Mn²⁺ (1.56?mmol?g^?1) and the lowest towards Ni²⁺ (0.89?mmol?g^?1) and Cu²⁺ (0.46?mmol?g^?1). It was observed that sorption equilibrium occurs very quickly within 20–60?min. The pH_zpc of sorbent was calculated to be 6.58. At studied pH interval (3.0–7.0) the sorption capacity of MgFe₂O₄ was not significantly affected. Regeneration study showed that the metal loaded sorbent could be regenerated by aqueous solution of 10^?3 M MgCl₂ at pH 6.0 within 120?min of contact time. Regeneration test suggested that MgFe₂O₄ magnetic sorbent can be efficiently used at least for four adsorption-desorption cycles. The high sorption properties and kinetics of toxic metal ion sorption indicates good prospects of developed sorbent in practice for wastewater treatment.     

Adsorption from aqueous solution by δ-manganese dioxide II. Adsorption of some heavy metal cations

The adsorption isotherms of M²⁺ ions (M²⁺ = Ni²⁺, Co²⁺, Cd²⁺, Zn²⁺ and Mn²⁺) on the K⁺-form of δ-MnO₂, at pH 6 and at different temperatures, fitted the Langmuir equation and an apparent heat of adsorption, Q, was found to be - 78, - 33, - 34, - 19 and - 15 kJ mol^?1 respectively. The adsorption capacity of δ-MnO₂ increased in the series: Ni²⁺ < Co²⁺ < Cd²⁺ ± Zn²⁺ < Mn²⁺. This was nearly the order of decrease in the radii, r′, of the hydrated ions, estimated from hydration enthalpies. An ionexchange mechanism between hydrated K⁺ ions in the outer Helmholtz layer and hydrated M²⁺ ions in the solution, suggests positive entropy contributions which offset the endothermic Q. The proposed mechanism is in agreement with the observed sequence of adsorption capacity and with the decrease in Q in the above series, except for Co²⁺ adsorption (possibly complicated by the oxidation of Co²⁺ by δ-MnO²). The adsorption of the cations is probably accompanied by the exchange with Mn ions from the solid. There was evidence of specific adsorption below the point of zero charge (pH 3.3). The adsorption isotherms of Mn²⁺ ions at pH 7 were higher than those at pH 6 and Q was found to be - 19 kJ mol^?1. As the ionic strength increased, the adsorption isotherm of Mn²⁺ ions at pH 7 and 298 K shifted to lower values. Adsorption isotherms of Cu(II)ions at pH 3.5 and of Fe(III) at pH 2 represent specific adsorption and Q was found to be - 74 and - 13 kJ mol^?1 respectively.     

Polymer pendant ligand chemistry, 4. Recovery of precious metal ions from strongly acidic solution with a polymer-supported o-phenylenediamine hydrochloride ligand

We report on the synthesis and reactivity of a polymer-supported o-phenylenediamine hydrochloride ligand, PS-PDHC, using macroporous 6% crosslinked polystyrene-divinylbenzene beads. The PS-PDHC ligand was found to be highly selective to AuCl₄⁻ ions in strongly acidic solutions in the presence of other precious metal ions, PdCl₄²⁻, PtCl₄²⁻, RhCl₆³⁻, and RuCl₅²⁻ (selectivity values: 2.5, Au/Pd; 7.5, Au/Pt; 7, Au/Rh; 2.2, Au/Ru) as well as other transition metal ions, Fe ³⁺, Cr³⁺, CU²⁺, Nit+, and Mn²⁺. The sorption capacity, selectivity, kinetics of removal and recovery, and solution isotherms have been determined for AuCl₄⁻ ions in competition with the above-mentioned metal ions. The relative ease of formation of the anionic complex in 0.5 M HCI, AuCl₄⁻ was thought to be the primary reason for its selective ability to bind to the PS-PDHC ligand by an anion-exchange mechanism. Therefore, the effect of the HCI concentration on the kinetics of AuCl₄⁻ ion removal from solution was also investigated to clearly show that raising the pH from 0 to 5 caused a dramatic decrease in rate. The AuCl₄⁻ ion can be recovered quantitatively from the PS-PDHC beads using a 5% thiourea solution in 0.1 M HCl, allowing the polymer-supported ligand to be reused.     

Phospholipid metabolism inNeisseria gonorrhoeae: Phospholipid hydrolysis in nongrowing cells

Hydrolysis of cell envelope phospholipids was demonstrated in cells of both autolytic and nonautolytic strains ofNeisseria gonorrhoeae that were labeled during growth in the presence of [³H] acetate. The label incorporated into the cellular phospholipids was located exclusively in the fatty acid acyl side chains. Labeled cells were incubated for 2 hr in N-2-hydroxyethylpiperazine-N′-2-ethanesulfonic acid buffer, pH 8.5, containing various additions, and then examined for distribution of³H in lipids. Ca⁺⁺ selectively stimulated the deacylation of phosphatidylethanolamine (PE), whereas Mn⁺⁺ stimulated the deacylation of phosphatidylglycerol (PG). Hydrolysis of phosphatidylethanolamine by phospholipase A was accompanied by the accumulation of lysophosphatidylethanolamine (LPE) and free fatty acids in the cells. Free fatty acids accumulated to a greater extent than lysophosphatidylethanolamine, suggesting that the latter was further hydrolyzed to glycerophosphorylethanolamine (GPE) and free fatty acids by a lysophospholipase. Methanol, ethanol, propanol, and isopropanol, added at concentrations which inhibited growth by 50%, stimulated phospholipase A, but not lysophospholipase activity. Differences in heat inactivation, metal ion requirements, and pH optima suggested that phospholipase A activities with phosphatidylethanolamine or phosphatidylglycerol as substrate and lysophospholipase may be separate enzymes.     

Preparation and adsorption properties of poly(N‐vinylformamide/acrylonitrile) chelating fiber for heavy metal ions

In this article we report a new chelating fiber that was prepared from a hydrolyzate of poly(N‐vinylformamide/acrylonitrile) by a wet‐spinning method. This fiber contains chelating groups, such as amidine groups, amino groups, cyano groups, and amide groups, with high densities. We examined the chelating abilities for several metal ions with this fiber, and present the morphological merit of the fibrous product compared with the globular resin. Based on the research results, it is shown that the fiber has higher binding capacities and better adsorption properties for heavy metal ions than the resin. The pH value of the metal ion solution shows strong influences on the adsorption of the metal ions. The maximum adsorption capacities of the fiber for Cu²⁺, Cr³⁺, Co²⁺, Ni²⁺, and Mn²⁺ are 112.23, 88.11, 141.04, 108.06, and 73.51 mg/g, respectively. In mixed metal ions solution, the fiber adsorbs Cr³⁺, Cu²⁺ and Co²⁺ efficiently. The adsorbed metal ions can be quantitatively eluted by hydrochloric acid. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 1378–1386, 2002     

Stability constants of metal ion complexes formed with N3-deprotonated uridine in aqueous solution

The acidity constant for the deprotonation of the (N3)H site of uridine (Urd) and the stability constants of the M(Urd–H)⁺ complexes with the metal ions M²⁺=Mg²⁺, Ca²⁺, Mn²⁺, Zn²⁺ or Cd²⁺ have been determined by potentiometric pH titrations in aqueous solution at 25 °C and I=0.1 M (NaNO₃). The stability constant of the Pb(Urd–H)⁺ complex could not be measured due to the hydrolysis of Pb(aq)²⁺. It is shown that previously determined and compiled stability constants are far too large; the reason being most likely the neglect of M(aq)²⁺ hydrolysis, at least in the cases of Mn²⁺, Zn²⁺ and Cd²⁺. Because of the low stability of the alkaline earth ion complexes, it is suggested that in these instances outersphere species are formed which most likely also involve the C2 and/or C4 carbonyl oxygens of the uracil residue.     

The Kinetics of Lignin Reactions During Oxygen Bleaching. IV. The Reactivities of Different Lignin Model Compounds and the Influence of Metal Ions on the Rate of Degradation

The reactivities of different lignin model compounds with oxygen in alkaline media have been compared. Generally, phenolic structures with a conjugated side chain like stilbene and enol ethers react very rapidly during oxygen bleaching, whereas structures like propylguaiacol and β-aryl ethers are more resistent. Some of the reaction mechanisms involved are probably of a radical type because new crosslinked structures can be formed with even lower reactivity.

The influence of metal ions on the reactivity has also been studied. We have found that Mg²⁺ and transition metal ions like Mn²⁺, Cu²⁺ and Fe²⁺ influence the rate of degradation as well as the rate of dimerization. Most of the metal ions gave a lower rate of degradation as measured at pH 11. The addition of a small amount of hydrogen peroxide to the oxygen alkali system increases the rate of degradation.     

Barium chloride crosslinked carboxymethyl guar gum beads for gastrointestinal drug delivery

A mild method for microencapsulation of sensitive drugs, such as proteins, employing a suitably derivatized carboxymethyl guar gum (CMGG) and multivalent metal ions like Ca⁺⁺ and Ba⁺⁺ is reported. Initially, guar gum is derivatized with carboxymethyl groups so that it forms durable, self‐standing microbeads when its solution is dropped into CaCl₂ or BaCl₂ solutions. The swelling data of Ca⁺⁺ and Ba⁺⁺ crosslinked beads suggest that Ba⁺⁺ crosslinks CMGG much more efficiently than Ca⁺⁺. The drug loading efficiency of these Ba⁺⁺/CMGG beads, as a function of concentration of both metal ion as well as drug, was then determined using Bovine Serum Albumin as a model drug. The ability of these beads to protect the drug from the acidic environment of the stomach was investigated. It was found that a very little amount of the drug is released from the beads when they are suspended in NaCl–HCl buffer of pH 1.2 for 6 h. The beads were also shown to release almost the entire encapsulated drug when exposed to TRIS–HCl buffer of pH 7.4. Thus, the results indicate that Ba⁺⁺ crosslinked carboxymethyl guar gum beads can be used for gastrointestinal drug delivery. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 82: 3084–3090, 2001