Synthesis,tunable luminescence and thermal stability of Mg<Subscript>2</Subscript>Al<Subscript>4</Subscript>Si<Subscript>5</Subscript>O<Subscript>18</Subscript>:Ce<Superscript>3+</Superscript>/Mn<Superscript>2+</Superscript> phosphors

Ce³⁺/Mn²⁺ singly doped and codoped Mg₂Al₄Si₅O₁₈ phosphors were synthesized by a solid state reaction. The phase, luminescent properties and thermal stability of the synthesized phosphors were investigated. Ce³⁺ and Mn²⁺ singly doped Mg₂Al₄Si₅O₁₈ phosphors show emission bands locating in blue and yellow–red regions, respectively. In Ce³⁺ and Mn²⁺ codoped Mg₂Al₄Si₅O₁₈, tunable luminescence was obtained because of the energy transfer from Ce³⁺ to Mn²⁺. In Mg₂Al₄Si₅O₁₈:Ce³⁺/Mn²⁺ phosphors with a fixed Ce³⁺ concentration, energy transfer efficiency increases with the increasing Mn²⁺ concentration, which is confirmed by the continually decreasing intensity and shortening decay time of Ce³⁺ emission. Moreover, the luminescent properties and thermal stability provide a great significance on the applications in the field of light emitting diodes.     

Influence of Mn<Superscript>2+</Superscript> on the up-conversion emission performance of Mn<Superscript>2+</Superscript>, Yb<Superscript>3+</Superscript>, Er<Superscript>3+</Superscript>: ZnWO<Subscript>4</Subscript> green phosphors

The Mn²⁺, Yb³⁺, Er³⁺: ZnWO₄ green phosphors are synthesized successfully through the high temperature solid state reaction method. The micro-structure and morphology have been investigated by means of XRD and EDS. The doped concentrations of Mn²⁺, Yb³⁺, Er³⁺ are measured by ICP. The absorption spectra and emission spectra with different doped concentrations of Mn²⁺ are presented to reveal the influence of Mn²⁺ on the green up-conversion performance. Excited with 970 nm LED, the up-conversion emission peak at 547 nm is obtained and the CIE spectra as well as the green light photo are also presented. The results indicate that the Mn²⁺ ions play the role of the luminescence adjustment in the up-conversion process, which can improve the up-conversion green emission intensity effectively. The luminescence adjustment mechanism of Mn²⁺ ions in Mn²⁺, Yb³⁺, Er³⁺: ZnWO₄ green phosphors has been discussed. The crystal parameters of Dq, B and C are calculated to evaluate the energy level split effect.     

Synthesis and photoluminescence study of narrow-band UVB-emitting LiSr<Subscript>4</Subscript>(BO<Subscript>3</Subscript>)<Subscript>3</Subscript>:Gd<Superscript>3+</Superscript>, Pr<Superscript>3+</Superscript> phosphor

A series of Pr³⁺, Gd³⁺ and Pr³⁺–Gd³⁺-doped inorganic borate phosphors LiSr₄(BO₃)₃ were successfully synthesized by a modified solid-state diffusion method. The crystal structures and the phase purities of samples were characterized by powder X-ray diffraction. Surface morphology of the sample was studied by scanning electronic microscopy (SEM). The optimal concentrations of dopant Gd³⁺ ions in compound LiSr₄(BO₃)₃ were determined through the measurements of photoluminescence (PL) spectra of phosphors. Gd³⁺-doped phosphors LiSr₄(BO₃)₃ show strong band absorption in UV spectral region and narrow-band UVB emission under the excitation of 276 nm was only due to ⁶P _J → ⁸S_7/2 transition of Gd³⁺ ions. The effect of Pr³⁺ ion on excitation of LiSr₄(BO₃)₃:Gd³⁺ was also studied. The excitation of LiSr₄(BO₃)₃:Gd³⁺, Pr³⁺ gives a broad-band spectra, which show very good overlap with the Hg 253.7 nm line. The photoluminescence spectra of LiSr₄(BO₃)₃ with different doping concentrations Pr³⁺ and keeping the concentration of Gd³⁺ constant at 0.03 mol have also been studied. The emission intensity of LiSr₄(BO₃)₃:Pr³⁺–Gd³⁺ phosphors increases with increasing Pr³⁺ doping concentration and reaches a maximum at 0.01 mol. From the photoluminescence study of LiSr₄(BO₃)₃:Gd³⁺, Pr³⁺ we conclude that there was efficient energy transfer from Pr³⁺→ Gd³⁺ ions in LiSr_4?x?y Pr _x Gd _y (BO₃)₃ phosphors.     

Cr<Superscript>3+</Superscript> activated Zn<Subscript>3</Subscript>Al<Subscript>2</Subscript>Ge<Subscript>3</Subscript>O<Subscript>12</Subscript>: a novel near-infrared long persistent phosphor

The near-infrared (NIR) long persistent phosphors have gained considerable attention owing to the potential applications in in vivo imaging. A novel NIR long-persistent phosphors Zn₃Al₂Ge₃O₁₂:Cr³⁺ was successfully synthesized by a high temperature solid-state reaction. The luminescent properties and the afterglow behaviors of the Zn₃Al₂Ge₃O₁₂:Cr³⁺ were investigated in detail. On the basis of thermoluminescence analyses, the mechanism of the persistent afterglow of the phosphors was also discussed briefly. The afterglow duration of this phosphor can last more than 12 h with the 650–750 nm emission range after stoppage of 254 nm ultraviolet light irradiation. Specifically, the persistent luminescence intensity and duration were regulated by changing Cr³⁺ doping concentration. All the results indicate that the Cr³⁺ activated Zn₃Al₂Ge₃O₁₂ has promising potential of practical applications.     

Synthesis and photoluminescence properties of LiEu(W,Mo)<Subscript>2</Subscript>O<Subscript>8</Subscript>:Bi<Superscript>3+</Superscript> red-emitting phosphor for white-LEDs

LiEu_1−x (W_2−y Mo _y )O₈:xBi³⁺ series red-emitting phosphors were synthesized by solid state reaction. The structure, morphology, and photoluminescent properties of phosphors were studied by X-ray powder diffraction, scanning electron microscopy, and photoluminescence spectrum, respectively. X-ray powder diffraction analysis showed that the as-obtained phosphors belong to the scheelite structure. The average particle size of the investigated phosphor was about 8 μm. The excitation spectrum exhibits a charge-transfer broad band along with some sharp peaks from the typical 4f–4f transitions of Eu³⁺. Under excitation of UV, near-UV, or blue light, these phosphors showed strong red emission at 615 nm due to ⁵D₀–⁷F₂ transition of Eu³⁺. The incorporation of Mo⁶⁺ into LiEuW₂O₈:Bi³⁺ could induce red-shift of the charge-transfer broad band and a remarkable increase of photoluminescence. The highest red-emission intensity was observed with LiEu_0.80Mo₂O₈:0.20Bi³⁺. Compared with the commercial red-emitting phosphor, Y₂O₂S:Eu³⁺, the emission intensity of LiEu_0.80Mo₂O₈:0.20Bi³⁺ phosphor is much stronger than that of Y₂O₂S:Eu³⁺ and its chromaticity coordinates are closer to the standard values than that of the commercial phosphor. The optical properties of LiEu_0.80Mo₂O₈:0.20Bi³⁺ phosphor make it attractive for the application in white-light-emitting diodes (LEDs), in particular for near-UV InGaN-based white-LEDs.     

Single phased Sr<Subscript>3</Subscript>La(PO<Subscript>4</Subscript>)<Subscript>3</Subscript>:Eu<Superscript>2+</Superscript>/Mn<Superscript>2+</Superscript> phosphors: solid state synthesis,tunable luminescence and potential applications in white light LEDs

A series of Sr₃La(PO₄)₃:Eu²⁺/Mn²⁺ phosphors were synthesized by a solid state reaction. The phase and the optical properties of the synthesized phosphors were investigated. The XRD results indicate that the doped Eu²⁺ and Mn²⁺ ions do not change the phase of Sr₃La(PO₄)₃. The peak wavelengths of Eu²⁺ single doped and Eu²⁺/Mn²⁺ codoped Sr₃La(PO₄)₃ phosphors shift to longer wavelength due to the larger crystal field splitting for Eu²⁺ and Mn²⁺. The increases of crystal field splitting for Eu²⁺ and Mn²⁺ are induced by the substitution of Sr²⁺ by Eu²⁺ and Mn²⁺ in Sr₃La(PO₄)₃ host. Due to energy transfer from Eu²⁺ to Mn²⁺ in Sr₃La(PO₄)₃:Eu²⁺/Mn²⁺ phosphors, tunable luminescence was obtained by changing the concentration of Mn²⁺. And the white light was emitted by Sr₃La(PO₄)₃:3.0 mol%Eu²⁺/4.0 mol%Mn²⁺ and Sr₃La(PO₄)₃:3.0 mol%Eu²⁺/5.0 mol%Mn²⁺ phosphors.     

Emission analysis of Pr<Superscript>3+</Superscript> &; Ho<Superscript>3+</Superscript>: Ca<Subscript>4</Subscript>GdO(BO<Subscript>3</Subscript>)<Subscript>3</Subscript> powder phosphors

Emission spectral results of Pr³⁺ & Ho³⁺ ions doped Ca₄GdO(BO₃)₃ powder phosphors are reported here. XRD, SEM and FTIR measurements have been carried out for them. The emission spectrum of Pr³⁺: Ca₄GdO(BO₃)₃ has shown an emission transition ¹D₂ → ³H₄ at 606 nm with λ_exci = 480 nm (³H₄ → ³P₀) and Ho³⁺: Ca₄GdO(BO₃)₃ phosphor has shown an emission transition ⁵S₂ → ⁵I₈ at 549 nm with λ_exci = 447 nm (⁵I₈ → ⁵F₁). Emission performances of these two phosphors have been explained in terms of energy level diagrams.     

Study of the effect of Li<Superscript>+</Superscript> concentration on the photoluminescence properties of Y<Subscript>2</Subscript>O<Subscript>3</Subscript>:Eu<Superscript>3+</Superscript> phosphors

Y₂O₃:Eu³⁺ phosphors were prepared by hydrothermal method. Effect of the doping concentration of Eu³⁺ on the photoluminescence properties of Y₂O₃:Eu³⁺ phosphor was studied in details. It was found that the strongest emission intensity is achieved as atomic ratio of Y³⁺ to Eu³⁺ is 8. As concentration of Eu³⁺ exceeds the critical concentration, the emission intensity decreases dramatically due to the concentration quenching of Eu³⁺. Also, the effect of Li⁺ on the photoluminescence performance of the Y₂O₃:Eu³⁺ phosphor is studied in this work. According to the results, the doping of Li⁺ may greatly improve the PL performance of the Y₂O₃:Eu³⁺ phosphors due to the flux effect and improved crystallinity caused by the doping of Li⁺.     

Synthesis and luminescent characterization of YAl<Subscript>3</Subscript>(BO<Subscript>3</Subscript>)<Subscript>4</Subscript>:Tb<Superscript>3+</Superscript> phosphors

YAl₃(BO₃)₄:Tb³⁺ phosphors were fabricated by the sol–gel method. The phosphor showed prominent luminescence in green due to the magnetic dipole transition of ⁵D₄–⁷F₅. Structural characterization of the luminescent material was carried out with X-ray powder diffraction (XRD) analysis. Luminescence properties were analyzed by measuring the excitation and photoluminescence spectra. Photoluminescence measurements indicated that the phosphor exhibited bright green emission at about 541 nm under UV excitation. It is shown that the 11% of doping concentration of Tb³⁺ ions in YAl₃(BO₃)₄:Tb³⁺ phosphors is optimum.     

Tunable luminescence properties and energy transfer of single-phase Ca<Subscript>4</Subscript>(PO<Subscript>4</Subscript>)<Subscript>2</Subscript>O: Dy<Superscript>3+</Superscript>, Eu<Superscript>2+</Superscript> multi-color phosphors for warm white light

The novel Ca_4?x(PO₄)₂O: xDy³⁺ and Ca_4?x?y(PO₄)₂O: xDy³⁺, yEu²⁺ multi-color phosphors were synthesized by traditional solid-state reaction. The crystal structure, particle morphology, photoluminescence properties and energy transfer process were investigated in detail. The X-ray diffraction (XRD) results demonstrate that the products showed pure monoclinic phase of Ca₄(PO₄)₂O when x < 0.1. The scanning electron microscopy (SEM) indicated that the phosphors were grain-like morphologies with diameters of ~ 3.7–7.0 μm. Under excitation of 345 nm, Dy³⁺-doped Ca₄(PO₄)₂O phosphors showed multi-color emission bands at 410, 481 and 580 nm originated from oxygen vacancies and Dy³⁺. Interestingly, Ca₄(PO₄)₂O: Dy³⁺, Eu²⁺ phosphors exhibited blue emission band at 481 nm and broad emission band from 530 to 670 nm covering green to red regions. The energy transfer process from Dy³⁺ to Eu²⁺ was observed for the co-doped samples, and the energy transfer efficiency reached to 60% when Eu²⁺ molar concentration was 8%. In particular, warm/cool/day white light with adjustable CCT (2800–6700 K) and high CRI (R_a > 85) can be obtained by changing the Eu²⁺ co-doping contents in Ca₄(PO₄)₂O: Dy³⁺, Eu²⁺ phosphors. The optimized Ca_3.952(PO₄)₂O: 0.04Dy³⁺, 0.008Eu²⁺ phosphor can achieve the typical white light with CCT of 4735 K and CRI of 87.     

The comparison: photoluminescence and afterglow behavior in CaSnO<Subscript>3</Subscript>:Dy<Superscript>3+</Superscript> and Ca<Subscript>2</Subscript>SnO<Subscript>4</Subscript>:Dy<Superscript>3+</Superscript> phosphors

This paper reports the comparison of photoluminescence and afterglow behavior of Dy³⁺ in CaSnO₃ and Ca₂SnO₄ phosphors. The samples containing CaSnO₃ and Ca₂SnO₄ were prepared via solid-state reaction. The properties have been characterized and analyzed by utilizing X-ray diffraction (XRD), photoluminescence spectroscope (PLS), X-ray photoelectron spectroscopy (XPS), afterglow spectroscopy (AS) and thermal luminescence spectroscope (TLS). The emission spectra revealed that CaSnO₃:Dy³⁺ and Ca₂SnO₄:Dy³⁺ phosphors showed different photoluminescence. The Ca₂SnO₄:Dy³⁺ phosphor showed a typical ⁴F_9/2 to ⁶H_j energy transition of Dy³⁺ ions, with three significant emissions centering around 482, 572 and 670 nm. However, the CaSnO₃:Dy³⁺ phosphor revealed a broad T₁ → S₀ transitions of Sn²⁺ ions. The XPS demonstrate the existence of Sn²⁺ ions in CaSnO₃ phosphor caused by the doping of Dy³⁺ ions. Both the CaSnO₃:Dy³⁺ and Ca₂SnO₄:Dy³⁺ phosphors showed a typical triple-exponential afterglow when the UV source switched off. Thermal simulated luminescence study indicated that the persistent afterglow of CaSnO₃:Dy³⁺ and Ca₂SnO₄:Dy³⁺ phosphors was generated by the suitable electron or hole traps which were resulted from the doping the calcium stannate host with rare-earth ions (Dy³⁺).     

Influence of Mg<Superscript>2+</Superscript>/Ga<Superscript>3+</Superscript> doping on luminescence of Y<Subscript>3</Subscript>Al<Subscript>5</Subscript>O<Subscript>12</Subscript>:Ce<Superscript>3+</Superscript> phosphors

Mg²⁺/Ga³⁺ doped Y₃Al₅O₁₂:Ce³⁺ phosphors were synthesized through a solid state reaction. The phase and luminescent of the synthesized phosphors were investigated. For Ga³⁺ codoped Y_2.96Ce_0.04Al_(5?x)Ga_xO₁₂ phosphors, the emission intensity increases with the increase of Ga³⁺ concentration up to Y_2.96Ce_0.04Al_4.80Ga_0.20O₁₂ and then decreases with a further increase of Ga³⁺ concentration, but the emission peak shifts to shorter wavelength continuously in the Ga³⁺ doping concentration range of 0.05–0.25. For Mg²⁺/Ga³⁺ codoped Y_2.96Ce_0.04Al_(4.8?y)Ga_0.20Mg_yO₁₂ phosphors, the emission intensity decreases and the emission peak shifts to longer wavelength continuously in the Mg²⁺ doping concentration range of 0.02–0.12. The emission spectra of Y_2.96Ce_0.04Al_(4.8?y)Ga_0.20Mg_yO₁₂ phosphors demonstrate that the codoped Mg²⁺/Ga³⁺ ions not only induce the enhancement of Y_2.96Ce_0.04Al₅O₁₂ emission intensity but also lead to the red shift of Y_2.96Ce_0.04Al₅O₁₂ emission peak. The decay lifetimes decrease in Mg²⁺/Ga³⁺ codoped Y_2.96Ce_0.04Al₅O₁₂ phosphors due to defects formed by substitutions of Y³⁺ by Mg²⁺/Ga³⁺.     

Enhanced red-emitting phosphor Na<Subscript>2</Subscript>Ca<Subscript>3</Subscript>Si<Subscript>2</Subscript>O<Subscript>8</Subscript>:Eu<Superscript>3+</Superscript> by charge compensation

A series of novel red-emitting Na₂Ca_3???x Si₂O₈:xEu³⁺ phosphors were synthesized by solid state reactions. The phosphors can strongly absorb 395 nm light, and show red emission with a good color purity. The excitation and emission spectra properties of Na₂Ca₃Si₂O₈:Eu³⁺ were characterized. Na₂Ca₃Si₂O₈:Eu³⁺ with self-compensated and alkali metal ions charge compensated approaches (2Ca²⁺→Eu³⁺ + M⁺, M?=?Li⁺, Na⁺, K⁺) have investigated, which found that the red emission of luminescent intensity can be greatly enhanced, and shows superior luminescent property to the commercial Y₂0₃S:Eu³⁺. The present work implies that the efficient charge compensated phosphors are promising candidates as red-emitting phosphor for w-LEDs.     

Ce and Eu activated Na<Subscript>2</Subscript>Zn<Subscript>5</Subscript>(PO<Subscript>4</Subscript>)<Subscript>4</Subscript>, a new promising novel phosphor

A new efficient phosphor, Eu²⁺/Eu³⁺ and Ce³⁺ activated Na₂Zn₅(PO₄)₄ has been synthesized by solid-state reaction technique at high temperature. X-ray powder diffraction analysis confirmed the formation of Na₂Zn₅(PO₄)₄ host lattice. Scanning electron microscopy indicated that the microstructure of the phosphor consisted of irregular fine grains with a size of about 0·5–2 μm. Photoluminescence excitation spectrum measurements of Ce³⁺ activated Na₂Zn₅(PO₄)₄ show that the phosphor can be efficiently excited by UV-Vis light from 280 to 310 nm to realize emission in the visible (blue) range due to the 5d-4f transition of Ce³⁺ ions which is applicable for scintillation purpose, whereas Eu²⁺/Eu³⁺ activated Na₂Zn₅(PO₄)₄ phosphor emits blue, green and red emission spectrum shows at 487 nm, 546 nm with a dominant peak at 611 nm respectively, due to Eu²⁺/Eu³⁺ ions which is promising candidate for solid state lighting. Therefore, newly synthesised, by low cost and easy technique prepared, novel phosphors may be useful as RGB phosphor for solid state lighting application.     

Structural and optical characterization of RE (Eu<Superscript>2+</Superscript>, Ce<Superscript>3+</Superscript>) doped SrMg<Subscript>2</Subscript>Al<Subscript>6</Subscript>Si<Subscript>9</Subscript>O<Subscript>30</Subscript> nanocrystalline phosphor

This article present the reports on optical study of Eu²⁺ and Ce³⁺ doped SrMg₂Al₆Si₉O₃₀ phosphors, which has been synthesized by combustion method at 550 °C. Here SrMg₂Al₆Si₉O₃₀:Eu²⁺ emission band observed at 425 nm by keeping the excitation wavelength constant at 342 nm, whereas SrMg₂Al₆Si₉O₃₀:Ce³⁺ ions shows the broad emission band at 383 nm, under 321 nm excitation wavelength, both the emission bands are assigned due to 5d–4f transition respectively. Further, phase purity, morphology and crystallite size are confirmed by XRD, SEM and TEM analysis. However, the TGA analysis is carried out to know the amount of weight lost during the thermal processing. The CIE coordinates of SrMg₂Al₆Si₉O₃₀:Eu²⁺ phosphor is observed at x?=?0.160, y?=?0.102 respectively, which may be used as a blue component for NUV-WLEDs. The critical distance of energy transfer between Ce³⁺ ions and host lattice is found to be 10.65 Å.     

Hydrothermal synthesis of blue-emitting YPO<Subscript>4</Subscript>:Yb<Superscript>3+</Superscript> nanophosphor

The blue-emitting YPO₄ phosphors doped with Yb³⁺ were prepared by a simple hydrothermal method. All the products were characterized by XRD and TEM, which revealed that they were zircon structure with leaf-like morphology. According to the analysis of photoluminescence spectra, upon ultraviolet (275 nm) excitation, the Yb³⁺ doped YPO₄ phosphor showed an intense blue emission composed of two main bands at 420 and 620 nm assigned to charge transfer state (CTS) → ²F_5/2 and CTS → ²F_7/2, respectively. Moreover, the optimum doping concentration of Yb³⁺ in YPO₄ phosphor was 1%, which exhibited the maximum emission intensity. The possible physical mechanism of concentration quenching was discussed, and the critical transfer distance determined to be 23.889 Å. In particular, the color purity of the as-synthesized Yb³⁺ doped YPO₄ phosphor was as high as 83%, which made it an excellent candidate for blue-emitting materials.     

Phase conversion and spectral properties of long lasting phosphor Zn<Subscript>3</Subscript> (PO<Subscript>4</Subscript>)<Subscript>2</Subscript>:Mn<Superscript>2+</Superscript>, Ga<Superscript>3+</Superscript>

A red long lasting phosphor Zn₃(PO₄)₂:Mn²⁺,Ga³⁺ (ZPMG) was prepared by ceramic method, and phase conversion and spectral properties were investigated. Results indicated that the phase conversion from α-Zn₃(PO₄)₂, β-Zn₃(PO₄)₂ toγ-Zn₃(PO₄)₂ occurs with different manganese concentration incorporated and sinter process. The structural change induced by the phase transformation results in a remarkable difference in the spectral properties. The possible luminescence mechanism for this red LLP with different forms has been illustrated.     

Synthesis and annealing effects on the optical spectroscopy properties of red-emitting Gd(P<Subscript>0.5</Subscript>V<Subscript>0.5</Subscript>)O<Subscript>4</Subscript>: x at.% Eu<Superscript>3+</Superscript>

In this work, Gd(P_0.5V_0.5)O₄: x at.% Eu³⁺ phosphors with different dopant concentrations (x?=?1, 3, 5, 6, 7, 9) were synthesized through chemical coprecipitation method. The phosphors were characterized by XRD, SEM, infrared spectroscopy, photoluminescence excitation, emission spectra and CIE. The results of XRD indicate that the obtained phosphors have the tetragonal phase structure. Eu³⁺ emission transitions arise mainly from the ⁵D₀ level to the ⁷F_J (J?=?0, 1, 2, 3, 4) manifolds. The emission intensity and crystalline of Gd(P_0.5V_0.5)O₄:x at% Eu³⁺ powders are increasing with annealing temperature at 600, 800, 1000, 1100, and 1200 °C, respectively. The introduction of VO₄^3? can broaden the range of UV excitation spectrum wavelength and enhance the transition between ⁵D₀ → ⁷F₁ to ⁵D₀ → ⁷F₂ for long wavelength emission. And the most dominant emission peak of Eu³⁺ for ⁵D₀ → ⁷F₂ transition is closer to pure red light at 622 nm. The maximum emission intensity of the phosphors is the concentration of 6 at.% Eu³⁺ because of the distance of the neighbor Eu³⁺ ions reaching a certain critical value and the influence of multipolar interaction. Compared to commercial phosphors Y₂O₃:Eu³⁺ and (Y,Gd)BO₃:Eu³⁺, our work yielded a longer wavelength red light emission intensity and a higher proportion of red light to orange light. All our results indicate that color purity of this phosphor turns it into a promising red phosphor in ultraviolet-pumped light-emitting diodes.     

New NaSrPO<Subscript>4</Subscript>:Sm<Superscript>3+</Superscript> phosphor as orange-red emitting material

Sm³⁺-activated NaSrPO₄ phosphors could be efficiently excited at 403 nm, and exhibited a bright red emission mainly including four wavelength peaks of 565, 600, 646 and 710 nm. The highest emission intensity was found for NaSr _1?x PO₄: xSm³⁺ with a composition of x = 0.007. Concentration quenching was observed as the composition of x exceeds 0.007. The decay time values of NaSr_1?x PO ₄ : xSm³⁺ phosphors range from around 2.55 to 3.49 ms. NaSr_1?x PO₄: xSm³⁺ phosphor shows a higher thermally stable luminescence and its thermal quenching temperature T ₅₀ was found to be 350°C, which is higher than that of commercial YAG:Ce³⁺ phosphor and ZnS:(Al, Ag) phosphor. Because NaSr_1?x PO₄: xSm³⁺ phosphor features a high colour-rendering index and chemical stability, it is potentially useful as a new scintillation material for white light-emitting diodes.     

Effect of Pr<Superscript>3+</Superscript> on the stokes luminescence of YPO<Subscript>4</Subscript>:Nd<Superscript>3+</Superscript> under IR excitation

We have identified general relationships between the spectral and kinetic properties of the IR Stokes luminescence bands of Y_{1 − x − y} Nd _x Pr _y PO₄ solid solutions in the spectral range 0.86–1.40 μm under 0.810-μm laser excitation. The results have been used to formulate technical requirements for the purity of rare-earth oxides for the fabrication of efficient YPO₄:Nd³⁺ IR phosphors and to develop a fast YPO₄:Nd³⁺, Pr³⁺ IR phosphor that allows the decay time of the Nd³⁺ IR Stokes luminescence bands in the range 0.86–1.40 μm to be tuned from 50 to 170 μs by varying the ratio of the Nd³⁺ and Pr³⁺ concentrations.