Photo-induced graft copolymerization. XV. Graft copolymerization of methyl methacrylate onto nylon-6 using erythrosin as photoinitiator

The photo-induced graft copolymerization of methyl methacrylate onto nylon-6 was investigated using erythrosin as the photoinitiator. The systems were buffered with phosphate citrate buffer (Na₂HPO₄/citric acid). The graft copolymerization was carried out within the temperature range of 35–50°C and from the corresponding Arrhenius plot, the energy of activation was evaluated. The effect of monomer, initiator, ascorbic acid, etc. on the graft yield has been investigated. Further, the effect of solvent on the rate of grafting has been investigated and the chain transfer constant (C_s) of the solvent has been evaluated. The kinetic data and other events indicate that the overall polymerization takes place by a radical mechanism. A suitable mechanism has been suggested and rate expressions have been derived.     

Grafting vinyl monomers onto silk fibers. XV. Graft copolymerization of methyl methacrylate onto silk using thallium (III) as initiator

The graft copolymerization of methyl methacrylate onto silk initiated by thallium (III) perchlorate was investigated in aqueous medium. The rate of grafting was evaluated varying the concentration of monomer, initiator, and acid, and the temperature. The graft yield was found to increase with increasing the monomer and initiator concentrations. The graft yield was found to decrease with increasing the acid concentration. The effect of inhibitors and various solvents on the graft yield was studied. From the Arrhenius plot the overall activation energy was found to be 4.2 kcal/mol. A suitable kinetic scheme has been proposed, and a rate equation has been derived.     

Photo-induced graft copolymerization: XVI: Graft copolymerization of methyl methacrylate onto nylon-6 using isoquinoline-sulfur dioxide and α-picoline-sulphur dioxide charge-transfer complexes as photoinitiators

The photo-induced graft copolymerization of methyl methacrylate onto nylon-6 fiber was investigated using isoquinoline-sulfur dioxide and α-picoline-sulfur dioxide charge-transfer complexes as the photoinitiators. The graft copolymerization was carried out within the temperature range of 35–50°C and from the corresponding Arrhenius plot, the energy of activation has been evaluated. The effect of monomer, initiators, inhibitors, etc. on the graft yield has been investigated. The effect of solvent on the rate of grafting has also been investigated from which the chain-transfer constant (C_s) of the solvent has been evaluated. The kinetic data and other evidence indicate that the overall polymerization takes place by a radical mechanism. The suitable mechanism has been suggested and the kinetic rate expression has been derived.     

Radiation-Induced graft copolymerization,I. Graft copolymerization of methyl methacrylate onto nylon-6

The radiation-induced graft copolymerization of methyl methacrylate onto nylon fibers was investigated at room temperature. The homopolymer was separated by soxhlet extraction. The graft yield increases with increase of dose rate from 0.1768 to 0.7072 Mrad. The percentage of grafting increase with increasing monomer concentration. Addition of copper sulphate and a non-ionic surfactant, sodium lauryl sulphate, supresses the formation of homopolymer. The value of G_b, the number of branches per 100 eV of energy absorbed in the substrate polymer, and the value of α, the fraction of substrate polymer grafted, have been computed. A kinetic scheme has been suggested.     

Graft copolymerization of methyl methacrylate onto wool using thallium (III) ions as initiator

The graft copolymerization of methyl methacrylate onto wool initiated by thallium (III) perchloric was investigated in aqueous perchloric acid medium. The rate of grafting was evaluated varying the concentrations of the monomer, initiator, acid, and temperature. The rate of grafting was found to increase with the increase of the monomer and the initiator concentration. The graft yield was found to decrease upon increasing the acid concentration. Increase of temperature was accompanied with the increase of the graft yield. From the Arrhenius plot the overall activation energy was calculated to be 4.7 kcal/mol. The effect of inhibitors, various solvents, cationic and anionic surfactants, and different inorganic salts on the graft yield was studied. The grafting was considerably influenced by chemical modification of wool prior to grafting. A suitable kinetic scheme has been proposed, and a rate equation has been derived.     

Grafting vinyl monomers onto cellulose. I. Graft copolymerization of methyl methacrylate onto cellulose using quinquevalent vanadium ion

Graft copolymerization of methyl methacrylate on cellulosic materials with the use of quinquevalent vanadium as an initiator was studied. Increase of V⁵⁺ion concentration up to 0.0025 mole/liter increases graft yield, and with further increase of the initiator the graft yield decreases. The graft yield increases with increase of monomer concentration. The increase of acid concentration is accompanied by decrease of graft yield. A measurable increase in graft yield was observed with increase in temperature from 65 to 75°C. The graft yield is medium and substrate dependent. A suitable kinetic scheme has been pictured and a rate equation has been derived.     

Graft copolymerization onto rubber. VII. Graft copolymerization of methyl methacrylate onto rubber using potassium peroxydisulfate catalyzed by silver ion

The graft copolymerization of methyl methacrylate onto natural rubber (NR) was carried out varying the concentration of monomer, initiator, thiourea, and silver nitrate over a wide range. The grafting reaction was temperature-dependent. From the Arrhenius plot, the overall energy of activation was computed. A suitable reaction scheme and rate expression for the rate of polymerization was suggested.     

Graft copolymerization of methyl methacrylate onto poly(ethylene terephthalate) fibers using thallium(III) ions as initiator

Graft copolymerization of methyl methacrylate onto poly(ethylene terephthalate) fibers was investigated in aqueous perchloric acid medium using thallium(III) ions as initiator. The rate of grafting was evaluated varying the concentrations of monomer, initiator, and acid and the temperature. The rate of grafting was found to increase with increase in monomer and initiator concentrations. The graft yield was found to increase with increase in the acid concentration up to 0.49 mL^?1, and beyond this concentration it was found to decrease. Increase in temperature resulted in increase in graft yield. From the Arrhenius plot the overall activation energy was found to be 3.76 kcal/mol. The effect of additives such as swelling agents, inorganic salts, different solvents, and inhibitors on graft yield was studied. A suitable kinetic scheme is proposed and a rate equation derived.     

Grafting vinyl monomers into nylon-6. II. Graft copolymerization of methyl methacrylate onto nylon-6 by hexavalent chromium ion

The feasibility of chromium(VI) to induce graft copolymerization of methyl methacrylate onto nylon-6 was investigated in the presence of nitrogen. The rate of grafting was determined by varying monomer concentration, chromium(VI) concentration, temperature, acidity of the medium, solvents, inorganic salts, and redox system. The graft yield increases significantly by increasing the monomer concentration. The graft yield increases with increase of [Cr(VI)] up to 0.025 mole/liter. With further increase of [Cr(VI)], the graft yield decreases. The increase of acid concentration up to 0.395 mole/liter results the increase in graft yield. Beyond this concentration the graft yield decreases. The graft yield increases with increase in temperature up to 55°C and thereafter it decreases. The graft yield is medium dependent. The graft yield increases with increasing thiourea concentration upto 0.0025 mole/liter but beyond this concentration, the percentage graft yield decreases. A suitable kinetic scheme has been proposed and the rate equation has been evaluated.     

Photoinduced graft copolymerization. IX. Graft copolymerization of methyl methacrylate onto nylon 6 in the presence of pyridine–bromine charge–transfer complex as photoinitiator

Photoinduced graft copolymerization of methyl methacrylate onto nylon 6 was investigated by using pyridine–bromine (Py–Br₂) charge–transfer complex as initiator. The graft yield increased with increasing monomer and initiator concentration at the initial stages, and therefore it decreased. The initiator exponent was computed to be 0.5. The reaction was carried out at three different temperatures, and the overall activation energy was computed. A suitable mechanism has been suggested.     

Graft copolymerization of polyacrylonitrile (PAN) onto polyester (PET) and simultaneous homopolymerization: A kinetic study. I

The kinetics of graft copolymerization of polyacrylonitrile (PAN) onto polyester (PET) and the simultaneous homopolymerization initiated by the potassium penoxomonosulfate (PMS)–ascorbic acid (H₂A) redox system were studied separately. Results on the graft copolymerization was adequately explained by a mechanism which also accounts for the reason for simultaneous homopolymerization. The observed homopolymerization results agreed with the proposal. Kinetic chain-length measurements on the graft copolymer and homopolymerization were used to evaluate the kinetic parameters. © 1995 John Wiley & Sons, Inc.     

Studies on graft copolymerization of cyclohexyl methacrylate onto 1,2-polybutadiene

The free radical grafting of cyclohexyl methacrylate (CMA) onto 1,2-polybutadiene (1,2-PBD) in benzene solution at 60°C was studied. The graft copolymer was characterized by IR, NMR, DSC, and intrinsic viscosity measurements. The polymerization of CMA shows normal kinetic behavior when the PBD concentration is kept below 1.0 monomer mol/L. The rate of grafting was determined at different reaction times, monomer concentrations, initiator concentrations, backbone concentrations, temperatures, and concentrations of the zinc chloride additive. The performance of the graft copolymer used as adhesive was also investigated for bonding of PVC/PVC film.     

Graft copolymerization of poly(vinyl chloride) with styrene. II. Thermal behavior

Thermal behavior of graft copolymers of polyvinyl chloride with polystyrene prepared by using a cationic initiator (AlCl₃) was evaluated by measurement of rates of dehydrochlorination in nitrogen atmosphere. With increase in the extent of grafting the rates were found to decrease. Dynamic thermogravimetric analysis revealed an overall improvement in thermal stability of copolymers. Development of polyene sequences in degraded polymer samples was evaluated by measurement of electronic absorption spectra. In comparison to PVC, graft copolymer samples had fewer conjugated double bonds.     

Grafting vinyl monomers onto wool fibers. I. Graft copolymerization of methyl methacrylate onto wool using V5+–thiourea redox system

The graft copolymerization of methyl methacrylate in wool fibers was investigated in aqueous solution using V⁵⁺—thiourea redox system. The rate of grafting was determined by varying monomer, thiourea, acidity of the medium, temperature, nature of wool, different acrylic monomers, and reaction medium. The graft yield increases significantly by increasing reaction time in the initial stages of the reaction but it does slow down on prolonging the duration of grafting. The effect of increasing monomer concentration brings about a significant enhancement in the graft yield. The graft yield increases with increasing thiourea concentration, but beyond 0.0075M, the percentage graft yield decreases. The graft yields are considerably influenced by chemical modification prior to grafting. Wool reduced with thioglycolic acid is more susceptible to grafting than untreated wool; the opposite effect is noted in the case of trinitrophenylated and esterified wools. A suitable kinetic scheme has been proposed and the rate equation has been evaluated.     

Grafting vinyl monomers onto wool fibers,IX. Graft copolymerization of methyl methacrylate onto wool using peroxydiphosphate-cysteine redox system

The graft copolymerization of methyl methacrylate onto wool was studied at 50°C using peroxydiphosphate-cysteine redox system as initiator. The rate of grafting was determined by varying monomer, initiator, cysteine, acid and temperature. The grafting is considerably influenced by chemical modification prior to grafting. A suitable kinetic path has been pictured and a rate expression has been derived.     

Grafting vinyl monomers onto polyester fibers. VI. Graft copolymerization of methyl methacrylate onto PET fibers using tetravalent cerium as initiator

The graft copolymerization of methyl methacrylate onto polyester fibers (PET) was investigated using tetravalent cerium as the initiator. The rate of grafting was found to increase progressively with the initiator and monomer concentrations up to 2.5 × 10^?2M and 70.41 × 10^?2M, respectively. The reaction was found to be catalysed by acid up to 15.0 × 10^?2M. The graft yield increased by increasing temperature. The effect of addition of some solvents and thiourea on the rate of grafting was also investigated. A suitable kinetic scheme has been pictured, and rate equations have been derived.     

A study on graft copolymerization of methyl methacrylate onto jute fiber

A kinetic study of the graft copolymerization of methyl methacrylate onto jute fiber using KMnO₄–malonic acid redox initiator system has been made. Effects of the concentrations of malonic acid, monomer, and KMnO₄ on graft yield have been studied. Besides, the effects of temperature, acid, and reaction medium, some inorganic salts on graft yield have been investigated. The most remarkable features of the investigation include the proposition of a mechanism, derivation of rate expression for the grafting process, and characterization of the grafted fiber by thermogravimetric analysis.     

Radiation-induced graft copolymerization of mixtures of styrene and n-butyl acrylate onto cellulose and cellulose triacetate

Mixtures of styrene and n-butyl acrylate of various compositions were grafted onto cellulose and cellulose triacetate fibers preirradiated with γ-rays at 0°C in air. Monomer reactivity ratios of the grafted copolymers were found to be different from those of the nongrafted copolymers or those of AIBN-initiated copolymers. The active species initiating the graft copolymerization were trapped radicals for cellulose and peroxides for cellulose triacetate. Kinetic investigations of the graft copolymerization of styrene onto preirradiated cellulose triacetate fibers were also carried out, and it was found that the kinetic scheme for radical polymerization is also applicable to graft copolymerization in a heterogeneous system.     

Graft copolymerization of glycidylmethacrylate onto modified nylon‐6 fibers

The graft copolymerization of glycidylmethacrylate (GMA) onto modified nylon‐6 fibers containing polydiallyldimethylammonium chloride (PDADMAC) groups in the presence of (Cu ²⁺–K₂S₂O₈) as a redox initiating system was carried out, with very high extent and almost without homopolymer formation. The mechanism of the graft polymerization induced by this system was suggested. The rate of grafting was determined by varying the monomer, K₂S₂O₈, and cupric ion concentrations as well as the amount of PDADMAC. The kinetic investigation revealed that the rate of grafting (Rp) of GMA onto modified nylon‐6 fibers is proportional to [GMA]^1.83, [CuSO₄·5H₂O]^0.46, [PDADMAC]^0.4, and [K₂S₂O₈]^1.43. The overall activation energy was 134.7 kJ/mol. The fine structure and thermal properties of the grafted nylon‐6 fibers were investigated. investigated. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 99: 613–618, 2006     

Ionic graft copolymerization. III. Graft copolymerization of β-propiolactone onto polyacrylonitrile containing diketene units

Polyacrylonitrile (PAN)–β-propiolactone (βPL) graft copolymer was synthesized by means of the ionic polymerization of βPL in the presence of polyacrylonitrile containing diketene units by using basic catalysts. A graft copolymer was produced by the copolymerization of βPL with the lactone ring in the trunk polymer. In this graft copolymerization method, the grafting efficiency was low. However, grafting efficiency increased with the mole ratio of polymeric lactone to βPL; also higher molecular weight of PβPL favored higher grafting efficiency. The reactivity ratio of polymeric lactone to βPL was estimated to be in the range of 0.1–0.3.