13C-NMR-Spektroskopie von bromierten 3-Keto- und 3β-Acetoxy-5α-cholestan-Verbindungen

¹³C-NMR Spectroscopic Investigations of Brominated 3-Keto- and 3β-Acetoxy-5α-cholestane Derivatives The chemical shifts of some brominated 3-keto- and 3β-acetoxy-5α-cholestane derivatives are determined. The substituent effects of bromine atoms on chemical shifts (SCS) and their additive behaviour, especially γ-SCS, are discussed.     

Enzyme-catalyzed polymerization and degradation of copolyesters of ε-caprolactone and γ-butyrolactone

Copolymers of γ-butyrolactone (γ-BL) and ε-caprolactone (ε-CL) were successfully synthesized by ring-opening polymerization using Novozyme-435 (immobilized lipase B from Candida antartica) as catalyst. Copolymers with different compositions were obtained and characterized by ¹H NMR, ¹³C NMR, GPC, DSC and X-ray diffraction. Increasing the [BL]/[CL] feed ratio resulted in decreases of molecular weight (M_n) of copolymers and reaction yield. Moreover, the BL contents in the copolymers varied according to the feed ratio. The T_m of the copolymers decreased from 58 to 49 °C with increase in BL content from 0 to 14%. The resulting copolymers were all semicrystalline with a PCL-type crystalline structure. Solution cast films were allowed to degrade in a pH 7.0 phosphate buffer solution containing Pseudomonas lipase. Weight loss data showed that the degradation rate of copolymers in the presence of Pseudomonas lipase decreased with the increase of BL contents.     

Intermediates of Prostanoid Synthesis. Stereospecific conversion of (+)-5β-hydroxycyclopenten-2-yl-1β-acetic acid γ-lactone into (+)-1β-methoxycarbonylmethyl-2β,3β-(p-nitrobenzylidene)-dioxycyclopentan-5-one

Starting from (+)-5β-hydroxycyclopenten-2-yl-1β-acetic acid γ-lactone ( 1 ), (+)-1β-methoxycarbonylmethyl-2β, 3β-(p-nitrobenzylidene)-dioxycyclopentan-5-one ( 7 ) was prepared within 4 steps. Subsequent cleavage of the latter gives (−)-3β-hydroxy-1-methoxy-carbonylmethylcyclopent-1-en-5-one ( 8a ). Hydroxylation of the lactone ( 1 ) was found to give (+)-2β,3β,5β-trihydroxycyclopentyl-1β-acetic acid γ-lactone ( 2a ) with cis-oriented hydroxy groups in respect to the lactone ring. No formation of the trans-isomer, as has been reported earlier [4], was observed.     

Quasi‐alternating polyesteramides from ε‐caprolactone and α‐amino acids

Glycine‐ɛ‐caprolactone‐based and α‐alanine‐ɛ‐caprolactone‐based polyesteramides with a strong tendency to form alternating sequences (degree of randomness = 1.64 and 1.31) were synthesized by melt polycondensation of intermediate hydroxy‐ and ethyl ester‐terminated amides. These intermediates were synthesized by the reaction of equimolar amounts of ɛ‐caprolactone and glycine or L‐α‐alanine ethyl esters in mild conditions. The structure and microstructure of these polyesteramides are discussed on the basis of an in‐depth nuclear magnetic resonance study. Both polyesteramides are semi‐crystalline, but the glycine‐based one presents the highest melting enthalpy. This polyesteramide also exhibits higher Young's modulus and stress at break than its α‐ and β‐alanine counterparts. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 44220.     

Poly(α,α,α′,α′-tetrafluoro-p-xylylene)

Poly(α,α,α′,α′-tetrafluoro-p-xylylene) was prepared by the pyrolysis of cyclo-di-(α,α,α′,α′-tetrafluoro-p-xylylene) and by the pyrolysis of α,α′-bis(alkylsulfonyl)-α,α,α′,α′-tetrafluoro-p-xylene. The pyrolysis of α,α′-dibromo-α,α,α′,α′-tetrafluoro-p-xylylene also gave the polymer, but the method is less satisfactory. Poly(α,α,α′,α′-tetrafluoro-p-xylylene) shows remarkable thermal and oxidative stability at elevated temperatures. Useful mechanical and electrical properties are retained after aging for 3000 hr at 250° in air. After initial change due to crystallization, tensile strength remains near 10,000 psi, elongation above 5%, and dielectric constants and dissipation factors at approximately 2.4 and .001, respectively.     

Untersuchung des Prall‐ und Druckverhaltens feuchter γ‐Al2O3‐Granulate

The material behavior of dominant elastic‐plastic γ‐Al₂O₃ granules has been experimentally studied by means of quasi static compression tests and dynamic impact tests until fracture. The obtained distributions of breakage velocity and specific breakage energy are compared. Thus, velocity‐dependent influences at stressing like viscous behaviour can be derived. Additionally, the influence of particle size and moisture content are investigated.     

Synthesis of γ‐Fluoro‐α, β‐unsaturated Carboxylic Esters from Saturated α‐Fluoro Aldehydes

γ‐Fluoro‐α, β‐unsaturated carboxylic esters 7a, 7b and 7d and 4‐fluoro‐4‐phenylbut‐3‐enoic ester ( 8 ) are obtained by two alternative pathways from 2‐fluoro aldehydes 5a—d , either by Horner—Wadsworth—Emmons reaction or by Wittig reaction. The aldehydes 5a—d are prepared by Swern oxidation of the corresponding fluorohydrins 4a—d . These are available from α‐olefins by bromofluorination, bromineby‐acetate replacement and subsequent hydrolysis.     

An efficient Synthesis of Acetylenic γ- and δ-Hydroxy Ketones, γ- and δ-keto acids,and γ- diketones via addition of 1-alkinyllithium compounds to γ- and δ-lactones

2-Hydroxy-6-alkyn-5-ones 3 , 1-hydroxy-5-alkyn-4-ones 4 , and 1-hydroxy-6-alkyn-5-ones 5 are conveniently obtained in excellent yields through a highly selective monoaddition of an 1-alkynyllithium compound 2 to γ-valerolactone (1a) , γ-butyrolactone (1b) or δ-valerolactone (1c) . They are oxidized by pyridinium dichromate or Jones reagent to the corresponding acetylenic 1,4-diketones 6 , 4-oxo carboxylic acids 7 , and 5-oxo carboxylic acids 8 , respectively.     

Efficient wound odor removal by β‐cyclodextrin functionalized poly (ε‐caprolactone) nanofibers

Polymer‐cyclodextrin (CD) composite nanofibers, by virtue of the hollow cavities and abundant hydroxyl groups present in CDs, have tremendous potential in a variety of biomedical applications. However, in most cases, especially in aliphatic polyesters, polymer chains thread readily into CD cavities, therefore its potential has not yet been fully realized. Herein, we report the formation of poly(ε‐caprolactone) (PCL)/β‐CD functional nanofibers by electrospinning their mixture from chloroform/N,N‐dimethylformamide (60 : 40). The fiber diameters of the neat PCL and β‐CD functionalized fibers were measured from the images obtained from a scanning electron microscope and were found to be about 500 nm. The efficiency of wound odor absorbance by these composite fibers was studied using a simulated wound odor solution, consisting of butyric and propionic acids in ethanol. Immersion tests indicated that even under less than ideal test conditions, the nanofibers containing β‐CDs were very efficient in masking the odor. The odor masking capability of the β‐CD functionalized PCL nanofibers were further confirmed by thermogravimetric analyses and GC observations, with the former method showing unique degradation patterns. The PCL/β‐CD nanocomposites, by virtue of having their β‐CD cavities free and unthreaded by PCL, could potentially be an ideal substrate for removing wound odors through formation of inclusion compounds with odorants, while providing an ideal environment for the wound to heal. These results suggest tailoring polymer‐CD nanostructures for specific applications in wound odor absorbance, surface grafting of chemical moieties, and vehicles for drug delivery, as examples. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42782.     

One‐Pot Quinine‐Catalyzed Synthesis of α‐Chiral γ‐Keto Esters: Enantioenriched Precursors of cis‐α,γ‐Substituted‐γ‐Butyrolactones

A highly enantioselective one‐pot synthesis of important building blocks, α‐chiral γ‐keto esters, has been developed by combining a quinine‐catalyzed Michael addition of malononitrile to trans‐enones followed by magnesium monoperoxyphthalate (MMPP) oxidation. These synthons proved to be useful reagents for a simple access to challenging cis‐α,γ‐disubstituted γ‐butyrolactones in good diastereoselectivity and high enantiocontrol.

     

Radiation-induced copolymerization of α,β,β-trifluoroacrylonitrile with α-olefin

Homopolymerization and copolymerization of α,β,β-trifluoroacrylonitrile (FAN) with γ-olefins were carried out in bulk by γ-ray irradiation at 25°C. FAN gives very small quantities of brown and greasy low molecular weight polymer. Cyano groups in FAN polymer were found to be readily hydrolyzed to acid amide groups in the atmosphere. FAN was found to copolymerize with ethylene, propylene, and isobutylene via a radical mechanism to form equimolar copolymers in a wide range of monomer compositions. The polymerization rate increases linearly with FAN fraction in the monomer mixture. These copolymers are also hydrolyzed in the atmosphere, and the hydrolysis proceeds with more difficulty for the copolymer with higher α-olefin. The reactivity ratios r₁ (FAN) and r₂ (α-olefin) were determined to be 0.01 and 0.12 for the FAN/ethylene copolymerization and 0.01 and 0.07 for the FAN/propylene copolymerization. These results confirm that an alternating copolymerization takes place in the FAN/α-olefin system.     

Preparation and characterization of electrospun poly(ε‐caprolactone)–pluronic–poly(ε‐caprolactone)‐based polyurethane nanofibers

In this study, amphiphilic poly(ε‐caprolactone)–pluronic–poly(ε‐caprolactone) (PCL–pluronic–PCL, PCFC) copolymers were synthesized by ring‐opening copolymerization and then reacted with isophorone diisocyanate to form polyurethane (PU) copolymers. The molecular weight of the PU copolymers was measured by gel permeation chromatography, and the chemical structure was analyzed by ¹H‐nuclear magnetic resonance and Fourier transform infrared spectra. Then, the PU copolymers were processed into fibrous scaffolds by the electrospinning technology. The morphology, surface wettability, mechanical strength, and cytotoxicity of the obtained PU fibrous mats were investigated by scanning electron microscopy, water contact angle analysis, tensile test, and MTT analysis. The results show that the molecular weights of PCFC and PU copolymers significantly affected the physicochemical properties of electrospun PU nanofibers. Moreover, their good in vitro biocompatibility showed that the as‐prepared PU nanofibers have great potential for applications in tissue engineering. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43643.     

Synthesis and biological activities of 3-polyamino-5β-cholane-7α,24-diols

A series of 3-polyaminochenodeoxycholic acid derivatives were synthesized and their in vitro antimicrobial and antifungal activities were assessed. The antimicrobial activity was evaluated against Gram-positive and Gram-negative bacteria, and the antifungal activity was assessed against two strains Candida albicans (ATCC MYA-1003) and Aspergillus fumigatus (ATCC 16424). The introduction of an amine group to steroid was accomplished by reductive amination of 3-oxosteroid 9 with Boc-spermidine and Boc-spermine, in the presence of NaBH(OAc)₃. This afforded a high yield of 3-polyaminosteroids of 10–13. The 3β-sperminyl-5β-cholane 6 showed the highest antimicrobial activity against Streptococcus pyogenes 308A, Staphylococcus aureus 503, Escherichia coli DC2 and Pseudomonas aeruginosa 9027 with a MIC value of 3.13 μg/mL.     

Photochemistry of α,α′-Disubstituted Azoalkanes. I. Photosolvolytic Inversion and Substitution of α,α′-Dichloro- and α,α′-Dialkoyloxyazoalkanes

A series of α,α′-dichloro (α DClA), α,α′-dialkoyloxy- (αDAlA) and α,α′-dibenzoxy-azoalkanes (αDBeA) without α-aryl substituents was found to undergo meso ? dl photointerconversion upon direct irradiation through Pyrex in the presence of oxygen in a number of solvents. Furthermore, irradiation of α,α′-dipropionoxy-azoalkanes in benzene in the presence of excess acetic acid leads to substitution of the propionoxy groups by acetoxy groups in addition to meso ? dl photointerconversion. Similar irradiation in the presence of CH₃CO₂D does not lead to deuterium substitution of the β-hydrogens. The presence of benzenethiol radical scavenger does not affect the course of these photoreactions. Photosolvolysis schemes involving heterolysis (in the case of αDAlA and αDBeA) or an unstable intermediate (in the case of αDClA) are proposed.     

Synthesis of α, α′, β-trideuterovinyl acetate

Reaction conditions for the synthesis of α, α′, β-trideuterovinyl acetate by the continuous vapour phase catalytic reaction of deuteroacetylene and acetic acid-d (CH₃COOD) are described.