Techno-economic study of off-grid hybrid photovoltaic/battery and photovoltaic/battery/fuel cell power systems in Kunming,China

The objective of this study is to evaluate the technical and economic feasibility of stand-alone hybrid photovoltaic (PV)/battery and PV/battery/fuel cell (FC) power systems for a community center comprising 100 households in Kunming by using the Hybrid Optimization Model for Electric Renewable (HOMER) software. HOMER is used to define the optimum sizing and techno-economic feasibility of the system equipment based on the geographical and meteorological data of the study region. In this study, different hybrid power systems are analyzed to select the optimum energy system while considering total net present cost (NPC) and levelized cost of energy (COE). The results showed that the optimal hybrid PV/battery system comprised 500 kW PV modules, 1200 7.6-kWh battery units, and 500 kW power converters. The proposed system has an initial cost of $6,670,000, an annual operating cost of $82,763/yr, a total NPC of $7,727,992, and a levelized COE of $1.536/kWh. While the PV/battery/FC power system is possible, the cost increases were due to the investment cost of the FC system. The optimal PV/battery/FC system has an initial cost of $6,763,000, an annual operating cost of $82,312/yr, a total NPC of $7,815,223, and a levelized COE of $1.553/kWh.     

Sizing optimization of a stand-alone street lighting system powered by a hybrid system using fuel cell,PV and battery

Currently commercialised stand-alone street lighting systems based on the classical configuration coupling photovoltaic cells (PV) and battery cannot work all the year round in regions that are far from the equator. To improve the classical system, a hybrid system coupling a PV, a battery and a fuel cell is proposed. However, the sizing method of hybrid systems is a key issue in obtaining the cheapest system. To optimise the system, an original time-saving method is applied. Two optimization methods are used: first the genetic algorithms, then the simplex algorithms. A simulation model is used to evaluate the validity of the different hybrid configurations. After presenting the problem of stand-alone street lighting, the optimization methodology and the simulation model are detailed. Finally, an optimal configuration is obtained and shows that a 60 W street light would cost 7150€ with a lifetime of 25 years. The optimised parameters are also given and analysed.     

Modelling battery charge regulation for a stand-alone photovoltaic system

A new model for the charge and discharge characteristics of a lead–acid battery is presented which aims to model the effect on capacity of variable charge and discharge rates. This model has been implemented using the circuit simulator PSPICE, and is used to investigate the effect of the charge controller strategy on the performance of a stand-alone PV system. It is shown that a simple limit on charging voltage is probably adequate to achieve a high state of charge, although a two-level regulator may be needed to maintain battery condition. The benefits of maximum power point tracking are also investigated.     

Solid oxide fuel cell hybrid system: Control strategy for stand-alone configurations

The aim of this study is the development and testing of a control system for solid oxide fuel cell hybrid systems through dynamic simulations. Due to the complexity of these cycles, several parameters, such as the turbine rotational speed, the temperatures within the fuel cell, the differential pressure between the anodic and the cathodic side and the Steam-To-Carbon Ratio need to be monitored and kept within safe limits. Furthermore, in stand-alone conditions the system response to load variations is required to meet the global plant power demand at any time, supporting global load variations and avoiding dangerous or unstable conditions. The plant component models and their integration were carried out in previous studies. This paper focuses on the control strategy required for managing the net electrical power from the system, avoiding malfunctions or damage. Once the control system was developed and tuned, its performance was evaluated by simulating the transient behaviour of the whole hybrid cycle: the results for several operating conditions are presented and discussed.     

Study of hybrid energy system coupling fuel cell,solar thermal system and photovoltaic cell

The present work examines the combination of solar energy systems with Fuel cell. Indeed, fuel cells are green storage systems without any pollution effects. They are supplied by oxygen and hydrogen to produce electricity. That is why it is inescapable to find a source of hydrogen in order to use fuel cell. Several techniques can be adopted to produce hydrogen depending on the availability and the cost of the sources. One of the most utilized techniques is electrolysers. They allow to obtain hydrogen from water by several technologies among them proton exchange membrane (PEM) which is considered in this work. On the other hand, electrolysers need electrical power to operate. A green-green energy system can be constructed by using a renewable energy source to supply fuel cell trough electrolysers. A comparison between two solar systems (Photovoltaic and Parabolic Trough) coupled to fuel cell is performed. A case study on the Lebanese city of Tripoli is carried out. The study shows the performance of each of both combined systems for different parameters and proposes recommendations depending on the considered configuration.     

Power management system for a fuel cell/battery hybrid vehicle incorporating fuel cell and battery degradation

Optimization of fuel cell/battery hybrid vehicle systems has primarily focused on reducing fuel consumption. However, it is also necessary to focus on fuel cell and battery durability as inadequate lifespan is still a major barrier to the commercialization of fuel cell vehicles. Here, we introduce a power management strategy which concurrently accounts for fuel consumption as well as fuel cell and battery degradation. Fuel cell degradation is quantified using a simplified electrochemical model which provides an analytical solution for the decay of the electrochemical surface area (ECSA) in the fuel cell by accounting for the performance loss due to transient power load, start/stop cycles, idling and high power load. The results show that the performance loss based on remaining ECSA matches well with test data in the literature. A validated empirical model is used to relate Lithium-ion battery capacity decay to C-rate. Simulations are then conducted using a typical bus drive cycle to optimize the fuel cell/battery hybrid system. We demonstrate that including these degradation models in the objective function can effectively extend the lifetime of the fuel cell at the expense of higher battery capacity decay resulting in a lower average running cost over the lifetime of the vehicle.     

Dynamic modeling of a photovoltaic hydrogen fuel cell hybrid system

The objective of this paper is to mathematically model a stand-alone renewable power system, referred to as “Photovoltaic–Fuel Cell (PVFC) hybrid system”, which maximizes the use of a renewable energy source. It comprises a photovoltaic generator (PV), a water electrolyzer, a hydrogen tank, and a proton exchange membrane (PEM) fuel cell generator. A multi-domain simulation platform Simplorer is employed to model the PVFC hybrid systems. Electrical power from the PV generator meets the user loads when there is sufficient solar radiation. The excess power from the PV generator is then used for water electrolysis to produce hydrogen. The fuel cell generator works as a backup generator to supplement the load demands when the PV energy is deficient during a period of low solar radiation, which keeps the system's reliability at the same level as for the conventional system. Case studies using the present model have shown that the present hybrid system has successfully tracked the daily power consumption in a typical family. It also verifies the effectiveness of the proposed management approach for operation of a stand-alone hybrid system, which is essential for determining a control strategy to ensure efficient and reliable operation of each part of the hybrid system. The present model scheme can be helpful in the design and performance analysis of a complex hybrid-power system prior to practical realization.     

Bond graph modeling,design and experimental validation of a photovoltaic/fuel cell/ electrolyzer/battery hybrid power system

This work presents a complete bond graph modeling of a hybrid photovoltaic-fuel cell-electrolyzer-battery system. These are multi-physics models that will take into account the influence of temperature on the electrochemical parameters. A bond graph modeling of the electrical dynamics of each source will be introduced. The bond graph models were developed to highlight the multi-physics aspect describing the interaction between hydraulic, thermal, electrochemical, thermodynamic, and electrical fields. This will involve using the most generic modeling approach possible for managing the energy flows of the system while taking into account the viability of the system. Another point treated in this work is to propose. In this work, a new strategy for the power flow management of the studied system has been proposed. This strategy aims to improve the overall efficiency of the studied system by optimizing the decisions made when starting and stopping the fuel cell and the electrolyzer. It was verified that the simulation results of the proposed system, when compared to simulation results presented in the literature, that the hydrogen demand is increased by an average of 8%. The developed management algorithm allows reducing the fuel cell degradation by 87% and the electrolyzer degradation by 65%. As for the operating time of the electrolyzer, an increment of 65% was achieved, thus improving the quality of the produced hydrogen. The Fuel Cell's running time has been decreased by 59%. With the ambition to validate the models proposed and the associated commands, the development of this study gave rise to the creation of an experimental platform. Using this high-performance experimental platform, experimental tests were carried out and the results obtained are compared with those obtained by simulation under the same metrological conditions.     

A mobile off-grid platform powered with photovoltaic/wind/battery/fuel cell hybrid power systems

Cross utilization of photovoltaic/wind/battery/fuel cell hybrid-power-system has been demonstrated to power an off-grid mobile living space. This concept shows that different renewable energy sources can be used simultaneously to power off-grid applications together with battery and hydrogen energy storage options. Photovoltaic (PV) and wind energy are used as primary sources and a fuel cell is used as backup power. A total of 2.7 kW energy production (wind and PV panels) along with 1.2 kW fuel cell power is supported with 17.2 kWh battery and 15 kWh hydrogen storage capacities. Supply/demand scenarios are prepared based on wind and solar data for Istanbul. Primary energy sources supply load and charge batteries. When there is energy excess, it is used to electrolyse water for hydrogen production, which in turn can either be used to power fuel cells or burnt as fuel by the hydrogen cooker. Power-to-gas and gas-to-power schemes are effectively utilized and shown in this study. Power demand by the installed equipment is supplied by batteries if no renewable energy is available. If there is high demand beyond battery capacity, fuel cell supplies energy in parallel. Automatic and manual controllable hydraulic systems are designed and installed to increase the photovoltaic efficiency by vertical axis control, to lift up & down wind turbine and to prevent vibrations on vehicle. Automatic control, data acquisition, monitoring, telemetry hardware and software are established. In order to increase public awareness of renewable energy sources and its applications, system has been demonstrated in various exhibitions, conferences, energy forums, universities, governmental and nongovernmental organizations in Turkey, Austria, United Arab Emirates and Romania.     

Development of solid oxide fuel cell and battery hybrid power generation system

Solid oxide fuel cell hybrid generation system is the best scheme for the load tracking of off-grid monitoring stations. But there are still potential problems that need to be addressed: preventing fuel starvation and ensuring thermal safety while meeting load tracking in hybrid power generation system. In order to solve these problems, a feasible hybrid power generation system structure scheme is proposed which combined SOFC subsystem and Li-ion battery subsystem. Then a model of the hybrid power generation system is built based on the proposed system structure. On this basis, an adaptive controller, include the adaptive energy management algorithm and current feedforward gas supply strategy, is applied to manage the power-sharing in this hybrid system as well as keep the system operating within the safety constraints. The constraints, including maintaining the bus voltage at the desired level, keeping SOFC operating temperature in safety, and mitigating fuel starvation are explicitly considered. The stability of the proposed energy management algorithm is analyzed. Finally, the developed control algorithm is applied to the hybrid power generation system model, the operation result proves the feasibility of the designed controller strategy for hybrid generation system and effectively prevent fuel starvation and ensure thermal safety.     

Risk-constrained optimal operation of fuel cell/photovoltaic/battery/grid hybrid energy system using downside risk constraints method

Residential consumers have electrical and thermal loads. Therefore they can be utilized hybrid thermal and electrical energy systems to procure their required energy. In the proposed system, in order to supply residential loads, a hybrid energy system (HES) is proposed which consists of photovoltaic/solid oxide fuel cell/thermal and electrical storages/boiler. Also, the uncertain parameters such as thermal and electrical loads, electricity market price, and solar irradiation are considered in the stochastic formulation. Uncertain parameters can be led to financial risks in the system operation. In order to measure imposed risks, in this paper, a novel risk management method called downside risk constraints method is used to model the financial risks imposed from the uncertain parameters. According to obtained results, the operator of the hybrid energy system by utilization of the downside risk constraints method has obtained a strategy that is scenario independent. In other words, the downside risk constraints method by minimizing the imposed risks introduced a zero-risk strategy which operation cost would not increase by changing the scenario. Results are shown that system operators by paying 1.3% more expected cost ($ 40.22 instead of $ 39.69), can make its operation independent of the scenario. Also, risk-based operational strategies of the proposed hybrid energy system are reported in the results as graphical results. The proposed risk-measurement operation problem of the designed hybrid energy system is formulated as a mixed-integer linear programming (MILP) model and modeled by GAMS software using CPLEX solver.     

Supervisor control for a stand-alone hybrid generation system using wind and photovoltaic energy

A comprehensive supervisor control for a hybrid system that comprises wind and photovoltaic generation subsystems, a battery bank, and an ac load is developed in this paper. The objectives of the supervisor control are, primarily, to satisfy the load power demand and, second, to maintain the state of charge of the battery bank to prevent blackout and to extend the life of the batteries. For these purposes, the supervisor controller determines online the operation mode of both generation subsystems, switching from power regulation to maximum power conversion. Decision criteria for the supervisor based on measurable system variables are presented. Finally, the performance of the supervisor controller is extensively assessed through computer simulation using a comprehensive nonlinear model of the plant.     

Costing of a stand-alone photovoltaic system

We have used a life-cycle cost analysis for a stand-alone photovoltaic system with and without an auxiliary engine generator. Because of different published cost calculations, we apply average values or new estimates in the analysis based on examinations of component lifetimes, maintenance operations, fuel consumption, components costs, percentage of installation completed, and discount rates.     

A stochastic method for stand-alone photovoltaic system sizing

Photovoltaic systems utilize solar energy to generate electrical energy to meet load demands. Optimal sizing of these systems includes the characterization of solar radiation. Solar radiation at the Earth’s surface has random characteristics and has been the focus of various academic studies. The objective of this study was to stochastically analyze parameters involved in the sizing of photovoltaic generators and develop a methodology for sizing of stand-alone photovoltaic systems. Energy storage for isolated systems and solar radiation were analyzed stochastically due to their random behavior. For the development of the methodology proposed stochastic analysis were studied including the Markov chain and beta probability density function. The obtained results were compared with those for sizing of stand-alone using from the Sandia method (deterministic), in which the stochastic model presented more reliable values. Both models present advantages and disadvantages, however, the stochastic one is more complex and provides more reliable and realistic results.     

Power management strategy for vehicular-applied hybrid fuel cell/battery power system

In this paper, a control strategy for a hybrid PEM (proton exchange membrane) fuel cell/BES (battery energy system) vehicular power system is presented. The strategy, based on fuzzy logic control, incorporates the slow dynamics of fuel cells and the state of charge (SOC) of the BES. Fuel cell output power was determined according to the driving load requirement and the SOC, using fuzzy dynamic decision-making and fuzzy self-organizing concepts. An analysis of the simulation results was conducted using Matlab/Simulink/Stateflow software in order to verify the effectiveness of the proposed control strategy. It was confirmed that the control scheme can be used to improve the operational efficiency of the hybrid power system.     

Comparative study of artificial intelligence techniques for sizing of a hydrogen-based stand-alone photovoltaic/wind hybrid system

As non-polluting reliable energy sources, stand-alone photovoltaic/wind/fuel cell (PV/wind/FC) hybrid systems are being studied from various aspects in recent years. In such systems, optimum sizing is the main issue for having a cost-effective system. This paper evaluates the performance of different artificial intelligence (AI) techniques for optimum sizing of a PV/wind/FC hybrid system to continuously satisfy the load demand with the minimal total annual cost. For this aim, the sizing problem is formulated and four well-known heuristic algorithms, namely, particle swarm optimization (PSO), tabu search (TS), simulated annealing (SA), and harmony search (HS), are applied to the system and the results are compared in terms of the total annual cost. It can be seen that not only average results produced by PSO are more promising than those of the other algorithms but also PSO has the most robustness. As another investigation, the sizing is also performed for a PV/wind/battery hybrid system and the results are compared with those of the PV/wind/FC system.     

Optimisation of a photovoltaic battery ultracapacitor hybrid energy storage system

Autonomous photovoltaic panels are intermittent sustainable energy sources which require energy storage to balance generation and demand, as photovoltaic generation is time and weather dependent. Traditionally batteries are the most common storage technology for photovoltaic systems. Photovoltaic batteries can encounter extended periods of low State of Charge (SOC), resulting in sulphation and stratification, reducing battery lifetime.Standalone photovoltaic systems are often used in remote areas away from the national grid for water irrigation system, requiring dc motor starting resulting in high inrush current, cathodic protection systems for oil and gas pipelines, emergency phones, warning signs, and telecommunication repeater stations, resulting in pulse discharging of the battery. A combination of depleted battery SOC and high burst current can result in premature loss of load due to stringent battery Low Voltage Disconnect (LVD) limits implemented by the battery management system.A combination of Valve Regulated Lead Acid (VRLA) batteries and ultracapacitors in a Hybrid Energy Storage System (HESS), which increases the power density of the overall system, is examined. Operating the ultracapacitor bank under high power conditions reduces the strain of large current extraction from the battery bank. The addition of the ultracapacitor bank presents the need for a methodology to optimise the photovoltaic system to prevent excess battery storage.This paper outlines the methodology utilised to optimise the combination of photovoltaic panels, batteries, and ultracapacitors for a given solar radiation and load profile employing Matlab software.     

Optimal energy management system for stand-alone wind turbine/photovoltaic/hydrogen/battery hybrid system with supervisory control based on fuzzy logic

This paper presents a novel hourly energy management system (EMS) for a stand-alone hybrid renewable energy system (HRES). The HRES is composed of a wind turbine (WT) and photovoltaic (PV) solar panels as primary energy sources, and two energy storage systems (ESS), which are a hydrogen subsystem and a battery. The WT and PV panels are made to work at maximum power point, whereas the battery and the hydrogen subsystem, which is composed of fuel cell (FC), electrolyzer and hydrogen storage tank, act as support and storage system. The EMS uses a fuzzy logic control to satisfy the energy demanded by the load and maintain the state-of-charge (SOC) of the battery and the hydrogen tank level between certain target margins, while trying to optimize the utilization cost and lifetime of the ESS. Commercial available components and an expected life of the HRES of 25 years were considered in this study. Simulation results show that the proposed control meets the objectives established for the EMS of the HRES, and achieves a total cost saving of 13% over other simpler EMS based on control states presented in this paper.     

Development of hybrid photovoltaic-fuel cell system for stand-alone application

In this paper we present firstly the different hybrid systems with fuel cell. Then, the study is given with a hybrid fuel cell–photovoltaic generator. The role of this system is the production of electricity without interruption in remote areas. It consists generally of a photovoltaic generator (PV), an alkaline water electrolyzer, a storage gas tank, a proton exchange membrane fuel cell (PEMFC), and power conditioning units (PCU) to manage the system operation of the hybrid system. Different topologies are competing for an optimal design of the hybrid photovoltaic–electrolyzer–fuel cell system. The studied system is proposed. PV subsystem work as a primary source, converting solar irradiation into electricity that is given to a DC bus. The second working subsystem is the electrolyzer which produces hydrogen and oxygen from water as a result of an electrochemical process. When there is an excess of solar generation available, the electrolyzer is turned on to begin producing hydrogen which is sent to a storage tank. The produced hydrogen is used by the third working subsystem (the fuel cell stack) which produces electrical energy to supply the DC bus. The modelisation of the global system is given and the obtained results are presented and discussed.