Effect of waves on the tidal energy resource at a planned tidal stream array

Wave–current interaction (WCI) processes can potentially alter tidal currents, and consequently affect the tidal stream resource at wave exposed sites. In this research, a high resolution coupled wave-tide model of a proposed tidal stream array has been developed. We investigated the effect of WCI processes on the tidal resource of the site for typical dominant wave scenarios of the region. We have implemented a simplified method to include the effect of waves on bottom friction. The results show that as a consequence of the combined effects of the wave radiation stresses and enhanced bottom friction, the tidal energy resource can be reduced by up to 20% and 15%, for extreme and mean winter wave scenarios, respectively. Whilst this study assessed the impact for a site relatively exposed to waves, the magnitude of this effect is variable depending on the wave climate of a region, and is expected to be different, particularly, in sites which are more exposed to waves. Such effects can be investigated in detail in future studies using a similar procedure to that presented here. It was also shown that the wind generated currents due to wind shear stress can alter the distribution of this effect.     

Wave power for La Isla Bonita

The island of La Palma (Spain), dubbed La Isla Bonita for its beauty, is a UNESCO Biosphere Reserve in the Atlantic Ocean. The island’s authorities are aiming for energy self-sufficiency based on wave energy and other renewables. In this research its wave resource is investigated using a 44-years hindcast dataset obtained through numerical modelling and validated with wave buoy records. First, its distribution around La Palma is studied. Significant variations are found, with the largest resource occurring off the north and northwest coasts; the northwest presents operational advantages (proximity to a port). Second, the seasonal variations in this area are studied. Wave energy is provided essentially by powerful NNW-NW swells in winter and autumn, by less energetic NNE-N waves in summer and spring. Finally, the resource is characterised in terms of sea states; it is found that the bulk of the energy is provided by waves between 9.5 s and 13.5 s of energy period and 1.5 m and 3.5 m of significant wave height, so the selection of the Wave Energy Converters to be installed should guarantee maximum efficiency in these ranges.     

Wave energy potential along the northern coasts of the Gulf of Oman, Iran

This study aims to investigate wave power along the northern coasts of the Gulf of Oman. To simulate wave parameters the third generation spectral SWAN model was utilized, and the results were validated with buoy and ADCP data. First, annual energy was calculated in the study region with the hindcast data set covering 23 years (1985-2007). The areas with the highest wave resource were determined and the area proximity to the port of Chabahar is suggested as the best site for the installation of a wave farm. Second, the average monthly wave energy in this area was investigated. The most energetic waves are provided by the southeast Indian Ocean monsoon from June to August. Finally, the wave energy resource was characterized in terms of sea state parameters. It was found that the bulk of annual wave energy occurs for significant wave heights between 1 and 3 m and energy periods between 4 and 8 s in the direction of SSE.     

Assessments of wave energy in the Bohai Sea,China

Wave fields in the Bohai Sea are continuously simulated by the third-generation wave model SWAN in order to determine the wave energy resources from 1985 to 2010. The wind parameters used to simulate waves are obtained by the Regional Atmospheric Modeling System (RAMS). Comparisons of significant wave heights between simulations and observations show good agreement. The spatial distributions of mean monthly and annual averaged significant wave height and wave power flux are presented. Wave energy roses and temporal variations of average wave power density at five typical points in the Bohai Sea are calculated. Furthermore, the correlations between significant wave height and wave energy period are studied in scatter and energy diagrams.     

Prototype testing of the wave energy converter wave dragon

The Wave Dragon is an offshore wave energy converter of the overtopping type. It consists of two wave reflectors focusing the incoming waves towards a ramp, a reservoir for collecting the overtopping water and a number of hydro turbines for converting the pressure head into power.In the period from 1998 to 2001 extensive wave tank testing on a scale model was carried at Aalborg University. Then, a 57×27 m wide and 237 tonnes heavy (incl. ballast) prototype of the Wave Dragon, placed in Nissum Bredning, Denmark, was grid connected in May 2003 as the world's first offshore wave energy converter.The prototype is fully equipped with hydro turbines and automatic control systems, and is instrumented in order to monitor power production, wave climate, forces in mooring lines, stresses in the structure and movements of the Wave Dragon.In the period May 2003 to January 2005 an extensive measuring program has been carried out, establishing the background for optimal design of the structure and regulation of the power take off system. Planning for deployment of a 4 MW power production unit in the Atlantic by 2007 is in progress.     

Wave energy exploitation in the Ionian Sea Hellenic coasts: spatial planning of potential wave power stations

Wave energy represents the ‘new entry’ to Renewable Energy Sources discussion, in the context of clean and sustainable energy solutions in the electricity production sector. This research describes a geo-spatial Multiple-Criteria Decision Analysis, based on the Geographic Information Systems technology, for the identification of the best location to deploy a potential Wave Energy Farm in the Ionian Sea, an area offshore the Greek mainland West coast. For this purpose, several factors are taken into consideration; restrictions such as protected areas, military exercise areas etc. and weighted factors such as distance to power grid, wave height etc. The wave resource assessment is completed through real data measurements and numerical wave model approximations. The results pinpoint the most suitable areas for installing the proposed wave power plants, i.e. near the SW coast of Corfu, in the West side of the Straits between Kefallonia and Zakynthos and near the broader area of Pylos, in the SW coast of Peloponnesus. The suggested methodology can be equally applied in other spatial planning cases too, being considered as a checklist, addressed to policy-makers and private investors.     

Wave energy potential in the Baltic Sea and the Danish part of the North Sea, with reflections on the Skagerrak

Wave power, along with renewable energy-generating sources like tides and streams, is underestimated considering its advantageous physical properties and predictability. This paper examines possible examples of wave power installations in the Baltic Sea and the Danish part of the North Sea. Hindcasting data is used allowing estimations of wave energy generated and results show promising areas in the North Sea, but also several parts of the Baltic Sea are of interest. The study is based upon linear generator technique, placed on the seabed using point-absorbers arranged in arrays of up to several thousand units. The study aims at showing the physical possibilities of wave energy, including economical feasibility and environmental advantages of wave energy even in moderate wave climates. With discussion from two examples in the Baltic Sea, one in the Danish North Sea and a new pilot study site in the Swedish part of Skagerrak, this study show feasible illustrations of wave energy takeouts. Project examples vary in size due to distance to grid, grid voltage, and may thus be economically feasible. Examples also show considerations in societal and nature conservation matters, including aspects such as industrial and military interests, archaeological or marine reserves and local geology. The authors conclude that wave energy electric conversion is an option that needs more attention and which has several advantages compared to conventional renewable sources. Sound engineering, in combination with producer, consumer and broad societal perspective is advised for a sustainable development of wave energy conversion.     

Offshore wave energy resource assessment in the East China Sea

The offshore wave energy resource in the East China Sea (ECS) off the coast of the southern East China is assessed using wave buoy data covering the period of 2011−2013. It is found that the averaged offshore wave power was approximately 13 kW m⁻¹ in the region of interest. Most of the offshore wave energy in the ECS is contributed by the sea states with significant wave heights between 1.5 m and 3.5 m and with wave energy periods between 6 s and 8 s. Seasonal variations are detected in the wave characteristics of significant wave height and wave power. The predominant wave directions are mainly from the II quadrant and the IV quadrant, respectively, in winter and summer, in accordance with the monsoon characteristics in the ECS. Wave heights, periods and power are generally higher in winter and autumn, and weaker in spring and summer; however, extreme values occur in some summer and autumn months due to the extreme conditions caused by typhoons passing over this region. These extreme sea states do not contribute much to the total annual energy, mainly because of their low occurrence, but may bring risks to the wave energy converters.     

Iran atlas of offshore renewable energies

The aim of the present study is to provide an Atlas of IRAN Offshore Renewable Energy Resources (hereafter called ‘the Atlas’) to map out wave and tidal resources at a national scale, extending over the area of the Persian Gulf and Sea of Oman. Such an Atlas can provide necessary tools to identify the areas with greatest resource potential and within reach of present technology development.To estimate available tidal energy resources at the site, a two-dimensional tidally driven hydrodynamic numerical model of Persian Gulf was developed using the hydrodynamic model in the MIKE 21 Flow Model (MIKE 21HD), with validation using tidal elevation measurements and tidal stream diamonds from Admiralty charts. The results of the model were used to produce a time series of the tidal stream velocity over the simulation period.Moreover, to assess the potential of the wave energy in this site, a model was developed based on six-hourly data from a third generation ocean wave model (ISWM-Iranian Sea Wave Model) covering the period 1992–2003.To ensure the information provided to the Atlas is managed and maintained most effectively, all the derived marine resource parameters have been captured in a structured database, within a Geographical Information System (GIS), so enabling effective data management, presentation and interrogation.     

Shape optimisation of floating wave energy converters for a specified wave energy spectrum

Ocean wave energy is one of the world's most powerful forms of energy and the energy density in ocean waves is the highest among renewable energy sources. Wave energy converters are employed to harness this energy and convert it into usable electrical energy. However, in order to efficiently extract the energy, the wave energy converter must be optimised in the design stage. Therefore, in this paper, a methodology is presented which aims to optimise the structural geometric configuration of the device to maximise the average power extraction from its intended deployment site. Furthermore, a case study of the Atlantic marine energy test site, off the west coast of Ireland, is undertaken in order to demonstrate the methodology. Using the average annual wave energy spectrum at this site as the input, the optimum structural geometric configuration was established, along with an analysis of the optimum configuration for different radius devices. In addition, the optimum damping coefficient of the PTO mechanism is determined and the total mean absorbed power for the structure at the site over the entire scatter diagram of data is calculated.     

Choosing the site for the first wave farm in a region: A case study in the Galician Southwest (Spain)

Where should the first wave farm in a region be installed? The nearshore area with the largest resource is the prime candidate. But how should this area be determined? Wave resource analyses typically consider a small number of wave patterns. Does the number of wave patterns influence the outcome? And, more generally, what is the best procedure for selecting the area? This work proposes an approach based on a large number of nearshore wave patterns and applies it to the Galician Southwest, where the first administrative concession for a wave farm (at a site to be determined) is expected to be issued shortly. The sensitivity of the results to the number of wave patterns, hence to the percentages of the total annual energy and time covered in the analysis, is investigated. It is found that the area that emerges as having the largest resource does depend on these percentages. For this reason, conventional analyses based on a small number of wave patterns are not sufficient to reliably determine the area with the largest resource. It is necessary to ensure that a sufficiently large percentage of the total energy is considered, using a procedure like the one proposed in this work.     

Wave energy resources in sheltered sea areas: A case study of the Baltic Sea

Wave energy is a renewable source, which has not yet been exploited to a large extent. So far the main focus of wave energy conversion has been on the large wave energy resources of the great oceans on northern latitudes. However, large portions of the world potential wave energy resources are found in sheltered waters and calmer seas, which often exhibit a milder, but still steady wave climate. Examples are the Baltic Sea, the Mediterranean and the North Sea in Europe, and ocean areas closer to the equator. Many of the various schemes in the past consist of large mechanical structures, often located near the sea surface. In the present work we instead focus on wave power plants consisting of a number of small wave energy converters, forming large arrays. In this context, we look at advantageous arrangements of point absorbers, and discuss the potential of the Baltic Sea as a case study.     

22-Year wave energy hindcast for the China East Adjacent Seas

In order to investigate the wave energy resource, the third-generation wave model SWAN is utilised to simulate wave parameters of the China East Adjacent Seas (CEAS) including Bohai, Yellow and East China Sea for the 22 years period ranging from 1990.1 to 2011.12. The wind parameters used to simulate waves are obtained by the Weather Research & Forecasting Model (WRF). The results are validated by observed wave heights of 7 stations. The spatial distributions of wave energy density in the CEAS are analysed under the 22-year largest envelop, mean annual and season averaged wave conditions. Along China east coastal, the largest nearshore wave energy flux occurs along the nearshore zones between Zhoushan Island and south bound of CEAS area. The wave energy resources at Liaodong Peninsula Headland and East Zhoushan Island where economy develops rapidly are also studied in detail. For the two sites, the monthly averaged wave energy features of every year for the 22 years are investigated. The wave energy resources of the two potential sites are characterised in terms of wave state parameters. The largest monthly averaged density for the two sites occurs at Zhoushan Island adjacent sea and amounts to 29 kW/m.     

Wave electricity production in Italian offshore: A preliminary investigation

In this paper the feasibility of wave energy exploitation off the Italian coasts is investigated. At this aim, the energy production and the performance characteristics of three of the most promising and documented wave energy converters (AquaBuOY, Pelamis and Wave Dragon) are estimated for two of the most energetic Italian locations. The sites are Alghero, on the western coast of Sardinia and Mazara del Vallo, on the Sicily Strait and they have respectively an average annual wave power of 10.3 kW/m and 4 kW/m, and an available annual wave energy of 90 MWh/m and 35 MWh/m.The energy production of the hypothetical wave farms is calculated based on the performance matrices of the wave energy converters (WECs) and on 21 years of wave buoy records, covering the period from 1990 to 2011. The estimated capacity factors are low (between 4% and 9%) compared to the ones obtained for the same wave energy converters in other locations and are affected by a strong seasonal variability. This indicates that the considered WECs are oversized with respect to the local wave climate and that a more efficient energy conversion would be obtained if they were downscaled according to the typical wave height and period of the study sites. As a consequence of the optimization of the device scale, at Alghero the deployment of 1:2.5 AquaBuOY, Pelamis or Wave Dragon devices would result in capacity factors around 20% and in a quite constant energy production throughout the year. In fact, the size reduction of the wave energy converters allows to capture the energy of the small waves which would otherwise be lost with the original WECs.The results of the present work suggest that deploying classic wave energy converters in Italian seas would not be cost effective but if the devices could accommodate a proper downscaling, their performance in energy conversion would become economically attractive also for some Italian locations.     

Wave energy potential along the western Portuguese coast

An assessment of nearshore wave energy resource along the Portuguese coast is presented, focusing on identify appropriate locations for testing and developing Wave Energy Converter (WEC) for commercial exploit. The analysis covers the whole west seaside, to which a partition defined by 7 linear sections parallel to the coastline at 50 m depth was considered. Available wave energy at each linear sector was calculated from nearshore wave parameters, using as input the offshore wave conditions provided by a 15-year ocean wind-wave model simulation and considering a simplified but well-established analytical procedure for shoreward wave transformation. Two alternative measures of the nearshore wave energy resource were considered, the standard omni-directional wave power density and the more restricted normally-directed wave energy flux.Offshore wave direction combine to shoreline orientation proved to be determinant on the evaluation of the wave energy resource in each section, since sectors of the shoreline directly facing the offshore annual average wave direction have limited reduction in available wave energy as compare to offshore values. Independently of the wave energy measured criteria used, the analysis suggests that the sector from Peniche to Nazaré is the more suitable location for nearshore wave energy exploitation, with annual wave energy around 200 MWh m⁻¹, closely followed by the adjacent sector from Nazaré to Figueira da Foz.     

Application of the time-dependent mild-slope equations for the simulation of wake effects in the lee of a farm of Wave Dragon wave energy converters

Time-dependent mild-slope equations have been extensively used to compute wave transformations near coastal and offshore structures for more than 20 years. Recently the wave absorption characteristics of a Wave Energy Converter (abbreviated as WEC) of the overtopping type have been implemented in a time-dependent mild-slope equation model by using numerical sponge layers. In this paper the developed WEC implementation is applied to a single Wave Dragon WEC and multiple Wave Dragon WECs. The Wave Dragon WEC is a floating offshore converter of the overtopping type. Two wave reflectors focus the incident wave power towards a ramp. The focussed waves run up the ramp and overtop in a water reservoir above mean sea level. The obtained potential energy is converted into electricity when the stored water drains back to the sea through hydro turbines. The wave reflectors and the main body (ramp and reservoir) are simulated as porous structures, exhibiting the same reflection, respectively absorption characteristics as obtained for the prototype Wave Dragon WEC. The wake effects behind a single Wave Dragon WEC are studied in detail for uni- and multidirectional waves. The shadow zone indicating the wake effect is decreasing with increasing directional spreading. The wake in the lee of a farm of five Wave Dragon WECs, installed in a staggered grid (3 WECs in the first row and 2 WECs in the second row), is calculated for three in-between distances of respectively D, 2D and 3D, with D the distance between the tips of the wave reflectors of a single WEC. As a result, a farm of five Wave Dragon WECs installed in a staggered grid with an in-between distance of 2D is preferred, when taking cost and spatial considerations into account.     

Master-slave wave farm systems based on energy filter with smoothed power output

Wave energy is an important renewable energy source. Previous studies of wave energy conversion (WEC) have focused on the maximum power take-off (PTO) techniques of a single machine. However, there is a lack of research on the energy and power quality of wave farm systems. Owing to the pulsating nature of ocean waves and popular PTO devices, the generated electrical power suffers from severe fluctuations. Existing solutions require extra energy storage and overrated power converters for wave power integration. In this study, we developed a master-slave wave farm system with rotor inertia energy storage; this system delivers self-smoothed power output to the grid and reduces the number of converters. Two control methods based on the moving average filter (MAF) and energy filter (EF) are proposed to smooth the output power of wave farms. RTDS simulations show that the proposed systems and control methods facilitate simple and smooth grid integration of wave energy.     

Offshore and nearshore wave energy assessment around the Korean Peninsula

A wave resource assessment is presented for the region around the Korean peninsula. Offshore wave power was obtained from significant wave heights and peak periods, and wave directions hindcast for the period of 1979-2003. The spatial distributions for the seasonal and annual averaged wave power were obtained on a 1/6° grid covering the longitudes of 117-143°E and latitudes of 20-50°N. The highest monthly averaged wave power (25 kW/m) was observed on the southwestern side of the peninsula in winter. In order to obtain the wave power around Hongdo, numerical simulations were performed with respect to the monthly averaged waves. The correlation between the significant wave height and energy period was considered to adjust the nearshore wave power obtained by the numerical simulation. The correction procedure was validated from comparing the simulated data with wave buoy data.     

Oscillating-water-column wave energy converters and air turbines: A review

The ocean waves are an important renewable energy resource that, if extensively exploited, may contribute significantly to the electrical energy supply of countries with coasts facing the sea. A wide variety of technologies has been proposed, studied, and in some cases tested at full size in real ocean conditions. Oscillating-water-column (OWC) devices, of fixed structure or floating, are an important class of wave energy devices. A large part of wave energy converter prototypes deployed so far into the sea are of OWC type. In an OWC, there is a fixed or floating hollow structure, open to the sea below the water surface, that traps air above the inner free-surface. Wave action alternately compresses and decompresses the trapped air which is forced to flow through a turbine coupled to a generator. The paper presents a comprehensive review of OWC technologies and air turbines. This is followed by a survey of theoretical, numerical and experimental modelling techniques of OWC converters. Reactive phase control and phase control by latching are important issues that are addressed, together with turbine rotational speed control.