A novel radial self-rectifying air turbine for use in wave energy converters

The flow through the air turbine of an oscillating water column (OWC) wave energy converter is reciprocating and is random and highly variable. It is not surprising that the time-averaged efficiency of the air turbine is substantially lower than that of a conventional turbine working in nearly steady conditions. A new type of radial-flow self-rectifying turbine (named here biradial turbine) is described in the paper. The two inlet/outlet openings of the rotor are axially offset from each other and face radially the surrounding space. The turbine is symmetrical with respect to a plane perpendicular to its axis of rotation. The rotor blades are surrounded by a pair of radial-flow guide-vane rows. Each guide vane row is connected to the rotor by an axisymmetric duct whose walls are flat discs. A two-dimensional flow method is used first as a preliminary design tool for the turbine geometry. More detailed numerical results are then obtained with the aid of a commercial three-dimensional real-fluid CFD code, which allows a more refined geometry optimization to be carried out, and yields results for flow details through the turbine and for the turbine overall performance under several operating conditions.     

Effect of guide vanes on the performance of a self-rectifying air turbine with constant and variable chord rotors

A Wells turbine is a self-rectifying air flow turbine capable of converting pneumatic power of the periodically reversing air stream in Oscillating Water Column into mechanical energy. The Wells turbine has inherent disadvantages; lower efficiency, poorer starting characteristics, higher axial force and low tangential force in comparison with conventional turbines. Guide vanes before and after the rotor suggest a means to improve the tangential force, hence its efficiency. Experimental investigations are carried out on a Wells turbine with the constant chord and variable chord blade rotors fitted with inlet and outlet guide vanes to understand the aerodynamics. Experiments were also conducted for the above said rotors with various stagger angles to validate the design stagger angle. In addition, the starting and running characteristics of the rotors have been studied and compared with the case without guide vanes. Studies were done at various flow coefficients covering the entire range of flow coefficients over which the turbine is operable. The efficiency, starting characteristics of the turbines with guide vanes have improved when compared with the respective turbines without guide vanes.     

Effect of Guide Vanes on the Performance of a Variable Chord Self—Rectifying Air Turbine

INTRODUCTIONWiththeconventionalenergyresourceslikelytogetexhaustedinafewdecades,theinexhaustiblesourcesofenergyhavetotaketheirplace.Alternateenergyfromtheoceanisattractingtheattelltionoftheresearchersinrecentyearsduetoitsperennialavailabilityandminimumhealthhazards.Ofthemanypossibleformsofoceanenergy,waveenergyispromising.Waveenergyisanalternateformenergy,whichispollutantfreeandinnearfutureitislikelytobeeconomicallyviable.Countrieswhicharesurroundedbyseaandpossessremotelysituatedislandcom…     

Comparison of Performances of Turbines for Wave Energy Conversion

The Wells turbine for a wave power generator is a self-rectifying air turbine that is available for an energy conversion in an oscillating water-air column without any rectifying valve. The objective of this paper is to compare the performances of the Wells turbines in which the profile of blade are NACA0020, NACA0015, CA9 and HSIM15-262123-1576 in the small-scale model testing. The running characteristics in the steady flow, the start and running characteristics in the sinusoidal flow and the hysteretic characteristics in the sinusoidal flow were investigated for four kinds of turbine. As a conclusion, the turbine in which the profile of blade is NACA0020 has the best performances among 4 turbines for the running and starting characteristics in the small-scale model testing.     

A review of impulse turbines for wave energy conversion

Oscillating Water Column based wave energy plants convert wave energy into low pressure pnuematic power in the form of bi-directional air flows. Air turbines which are capable of rotating uni-directionally in bi-directional air flow, otherwise also known as self-rectifying turbines, are used to extract mechanical shaft power which is further converted into electrical power by a generator. This paper reviews the state of the art in self-rectifying impulse air turbines. New results on optimum parameters for the fixed-guide-vane impulse turbine are also presented. Starting characteristics and conversion efficiencies of two types of impulse turbines are compared with the well known Wells turbine.     

气冷涡轮转子变叶尖间距性能试验及数值研究

为量化评估工程应用的气冷低压涡轮带冠转子叶片的叶尖间距大小对涡轮气动性能的影响,综合现有涡轮部件试验能力,以单级轴流低压涡轮性能试验件为基础,通过控制圆度的机加方式磨削转子外环内壁以实现叶尖间距的变化,采用控制冷气流量比的方法,开展5次不同叶尖间距大小的涡轮级性能试验,得到多工况下涡轮效率、换算流量和换算功率等特性参数。采用加载冷气及考虑转子叶冠结构的数值模型进行三维仿真计算,并与试验结果对比分析。研究表明：叶尖间距由0.6 mm增加至3.2 mm,低压涡轮流通能力增大1%,叶冠泄漏量增多3.4%,但做功能力下降2.3%。涡轮效率变化与叶尖间距大小近似呈线性关系,叶尖间距每增加1 mm,效率约降低0.7%,同时,叶尖间距的增加导致了叶冠腔的旋涡结构、气流掺混及主流入侵强度逐渐增大,引起动叶总压损失的增大,叶尖间距增加至3.2 mm导致叶间位置总压损失由0.88增至2.3。     

变几何涡轮可调导叶瞬时转动气动特性研究

为探究单级变几何涡轮(VGT)在导叶转动过程中的过渡态性能,对某动力涡轮进行了非定常数值计算,应用动网格技术实现导叶转角的改变,并对导叶通道开大或关小过渡过程中涡轮性能进行了分析。结果表明：导叶转角从0°变化到-5°时,单级涡轮效率逐渐下降1.6%,从0°变化到6°时,效率逐渐提高0.5%;质量流量和导叶出口绝对气流角随转角改变接近线性变化,而动叶出口相对气流角、熵增、效率和导叶出口总压损失等随转角改变呈抛物线型变化;过渡态下导叶流场内损失变化主要受上、下端壁处间隙泄漏涡影响,动叶出口熵增变化规律主要受动叶吸力侧泄漏涡和下部通道涡影响,其中下部通道涡的改变是引起熵增变化的主要原因。     

Effect of guide vane shape on the performance of a Wells turbine

A Wells turbine has inherent disadvantages: lower efficiency and poorer starting characteristics. Providing guide vanes on either side of the rotor could be one of the most effective ways of improving its performance. Several papers have demonstrated the usefulness of 2D guide vanes so far. In order to achieve further improvement in the performance of the Wells turbine, the effect of 3D guide vanes has been investigated experimentally by testing a model under steady flow conditions. Then, the running and starting characteristics under irregular flow conditions have been obtained by a computer simulation using quasi-steady analysis. It is found that the running and starting characteristics of the Wells turbine with 3D guide vanes are superior to those with 2D guide vanes.     

Performance of an impulse turbine with fixed guide vanes for wave power conversion

A simple fixed geometry impulse turbine has been studied as a suitable power converter in Oscillating Water Column based wave power plants. Comparison with the Wells turbine, which is the commonly used self-rectifying turbine in such applications, shows it to be superior in performance under irregular flow conditions. Optimum guide vane angle for maximum efficiency has been arrived at based on the five angles tested.     

The performance of Wells turbine under bi-directional airflow

This paper presents the performance of a Wells turbine operating under unsteady bi-directional airflow conditions. In this study, four kinds of blade profile were selected, NACA0020, NACA0015, CA9 and HSIM 15-262123-1576. The experiments have been carried out for two solidities under sinusoidal and irregular unsteady flow conditions based on Irish waves (Site2). It was found that for a Wells turbine operating under bi-directional air flow, the rotor geometry preferred is the blade profile of CA9 with rotor solidity σ=0.64. In addition, the efficiency curve of the Wells turbine under unidirectional flow conditions fails to present the rapid rise in the instantaneous efficiency which occurs at low flow coefficient of bi-directional flow condition. A comparative analysis between the numerical simulation results and experimental results was carried out. As a result, an excellent agreement was found between the numerical and experimental results. In addition, the effect of blade profile and rotor solidity on hysteretic characteristics of the turbine has been clarified experimentally under bi-directional airflow.     

Computational analysis of performance and flow investigation on wells turbine for wave energy conversion

Wells turbine is a self-rectifying airflow turbine capable of converting pneumatic power of the periodically reversing air stream in oscillating water column into mechanical energy. This paper reports the computational analysis on performance and aerodynamics of Wells turbine with the NACA 0021 constant chord blades. Studies have been made at various flow coefficients covering the entire range of flow coefficients over which the turbine is operable. The present computational model can predict the performance and aerodynamics of the turbine quantitatively and qualitatively. The model also predicted the flow coefficient at which the turbine stalls, with reasonable accuracy.     

变几何低压涡轮级多工况气动性能研究

为明确变几何低压涡轮级在多转角工况下气动性能变化情况,通过RANS方法并结合SST湍流模型,研究了可调导叶转角分别为-6°,-3°,0°,3°和6°条件下低压涡轮级的气动性能变化。结果表明：可调导叶旋转角度的变化会明显改变导叶叶顶及动叶通道内的流动情况,角度变大会增加涡轮级流量,并使导叶叶顶处负荷后移,上端区二次流强度增加,叶顶泄漏情况减弱,还会减小动叶进口相对气流角,使动叶压力面出现明显分离;角度变小对低压涡轮级流场的影响与之相反。当导叶转角从-6°变化到+3°时,涡轮级等熵滞止效率提升了约6.7%;当导叶转角从+3°变化到+6°时,涡轮级效率却下降了约0.19%。     

Computed effect of guide vane shape on performance of impulse turbine for wave energy conversion

This paper deals with the computational fluid dynamics (CFD) analysis on effect of guide vane shape on performance of impulse turbine for wave energy conversion. Initially, experiments have been conducted on the impulse turbine to validate the present CFD method and to analyse the aerodynamics in rotor and guide vanes, which demonstrates the necessity to improve the guide vanes shape. The results showed that the downstream guide vanes make considerable total pressure drop leads low performance of the turbine and hence three‐dimensional (3‐D) inlet and downstream guide vanes have been designed based on well‐known vortex theory to improve the efficiency of the turbine. In order to prove the improvement in efficiency due to 3‐D guide vanes, CFD analysis has been made on impulse turbine with 2‐D and 3‐D guide vanes for various flow coefficients. As a result, it is seen that the present CFD model can predict the experimental values with reasonable accuracy. Also, it is showed from the numerical results that the efficiency of the turbine can be improved by average of 4.5 percentage points by incorporating 3‐D guide vanes instead of 2‐D guide vanes. The physical reason for improvement in efficiency of the turbine due to 3‐D guide vanes has been explained with the CFD flow insight pictures. As the turbine operates in fluctuating flow conditions, the performance of the turbine with 2‐D and 3‐D guide vanes have been calculated numerically using quasi‐steady analysis. Furthermore, the performance of the turbine has been predicted for one year based on Irish wave climate to show the feasibility of using 3‐D guide vanes in actual sea wave conditions. Copyright © 2005 John Wiley & Sons, Ltd.     

Performance of Wells Turbine with Guide Vanes for Wave Energy Conversion

ＰｅｒｆｏｒｍａｎｃｅｏｆＷｅｌｌｓＴｕｒｂｉｎｅｗｉｔｈＧｕｉｄｅＶａｎｅｓｆｏｒＷａｖｅＥｎｅｒｇｙＣｏｎｖｅｒｓｉｏｎＭａｎａｂｕＴａｋａｏ；ＴｏｓｈｉａｋｉＳｅｔｏｇｕｃｈｉ；ＫｅｎｊｉＫａｎｅｋｏ（ＤｅｐａｒｔｍｅｎｔｏｆＭｅｃｈａｎｉｃａ...     

Study of turbine with self-pitch-controlled blades for wave energy conversion

The objective of this paper is to clarify the performance of a Wells air turbine using self-pitch-controlled blades under the real sea conditions and to obtain the useful information about the optimum setting angle. Experimental investigations were performed by model testing of a rotor with fixed blades under steady flow conditions. Then, the running and starting characteristics under sinusoidally oscillating flow conditions were obtained by a computer simulation using a quasi-steady analysis. As a result, the performances of the air turbine using self-pitch-controlled blades under the real sea conditions were clarified, and a suitable choice of design factor has been suggested for the setting angle of the rotor.     

An improved radial impulse turbine for OWC

Traditionally, wells turbines have been widely used in OWC plants. However, an alternative has been studied over recent years: a self-rectifying turbine known as an impulse turbine. We are interested in the radial version of the impulse turbine, which was initially proposed by M. McCormick. Previous research was carried out using CFD (FLUENT^®), which aimed to improve knowledge of the local flow behavior and the prediction of the performance for this kind of turbine. This previous work was developed with a geometry taken from the literature, but now our goal is to develop a new geometry design with a better performance. To achieve this, we have redesigned the blade and vane profiles and improved the interaction between them by means of a new relation between their setting angles. Under sinusoidal flow conditions the new design improves the turbine efficiency by up to 5% more than the geometry proposed by Professor Setoguchi, in 2002. In this paper, the design criteria we have used is described, and the flow behavior and the performance of this new design are compared with the previous one.     

Impulse Turbine with 3D Guide Vanes for Wave Energy Conversion

In this study, in order to achieve further improvement of the performance of an impulse turbine with fixed guide vanes for wave energy conversion, the effect of guide vane shape on the performance was investigated by experiment. The investigation was performed by model testing under steady flow condition. As a result, it was found that the efficiency of the turbine with 3D guide vanes are slightly superior to that of the turbine with 2D guide vanes because of the increase of torque by means of 3D guide vane, though pressure drop across the turbine for the 3D case is slightly higher than that for the 2D case.     

Testing and control of a power take-off system for an oscillating-water-column wave energy converter

The paper concerns the development of the PTO (power take-off) control of an OWC (oscillating-water-column) spar-buoy wave energy converter. The OWC spar-buoy is an axisymmetric device consisting of a submerged vertical tail tube open at both ends, rigidly fixed to a floater that moves essentially in heave. The oscillating motion of the internal free surface relative to the floater-tube set, produced by the incident waves, makes the air flow through a novel self-rectifying air turbine: the biradial turbine. To reduce the losses of the PTO system at partial load, an electrical generator with a rated power twice the maximum expected average power conversion of the buoy was adopted. The control of the turbine-generator set under highly energetic sea-state conditions was experimentally investigated by means of tests performed in a PTO test rig. In the reported tests, the hydrodynamics of the OWC spar-buoy and the aerodynamics of the air turbine were numerically simulated in real-time and coupled with the experimental model of the turbine/electrical generator set in a hardware-in-the-loop configuration. The experimental results allowed the dynamic behaviour of the PTO to be characterized and provided validation of the proposed control algorithms that ensure operation within safe limits.     

Numerical analysis of 3-D unsteady flow in a vaneless counter-rotating turbine

To reveal the unsteady flow characteristics of a vaneless counter-rotating turbine (VCRT), a three-dimensional, viscous, unsteady computational fluid dynamics (CFD) analysis was performed. The results show that unsteady simulation is superior to steady simulation because more flow characteristics can be obtained. The unsteady effects in upstream airfoil rows are weaker than those in downstream airfoil rows in the VCRT. The static pressure distribution along the span in the pressure surface of a high pressure turbine stator is more uniform than that in the suction surface. The static pressure distributions along the span in the pressure surfaces and the suction surfaces of a high pressure turbine rotor and a low pressure turbine rotor are all uneven. The numerical results also indicate that the load of a high pressure turbine rotor will increase with the increase of the span. The deviation is very big between the direction of air flow at the outlet of a high pressure turbine rotor and the axial direction. A similar result can also be obtained in the outlet of a low pressure turbine rotor. This means that the specific work of a high pressure turbine rotor and a low pressure turbine rotor is big enough to reach the design objectives. Translated from Journal of Engineering Thermophysics, 2006, 27(1): 35–38 [译自: 工程热物理学报]     

Flow analysis and performance improvement of a radial inflow turbine with back cavity under variable operation condition of compressed air energy storage

Radial inflow turbine is an important working output device in compressed air energy storage (CAES) system. It influences the system's efficiency significantly. However, the investigation about effect of back cavity leakage flow on flow loss in radial unshrouded rotor is still needed, especially under variable operation condition of CAES system. Therefore, the performance of radial turbine with back cavity at different total expansion ratio is revealed in the present work. Results illustrate that the variation of labyrinth seal clearance in the original back cavity has limited impact on the leakage flow and the isentropic efficiency. The isentropic efficiency only reduced by 0.11%, and the leakage flow rate is only increased by 0.017 kg/s when labyrinth seal size varies from 0.09 to 0.20 mm. The fluid in back cavity intends to leak into the rotor channel and causes more flow loss; the isentropic efficiency under different total expansion ratio is thus decreased, and a maximum isentropic efficiency reduction of 1.5% is obtained when total expansion ratio is 2.89. To control the flow loss, a “rotor‐back cavity seal” is proposed, and a maximum isentropic efficiency increment of 1.12% is achieved when total expansion ratio is 2.89.