Visualizing the local optical response of semiconducting carbon nanotubes to DNA-wrapping

We studied the local optical response of semiconducting single-walled carbon nanotubes to wrapping by DNA segments using high resolution tip-enhanced near-field microscopy. Photoluminescence (PL) near-field images of single nanotubes reveal large DNA-wrapping-induced red shifts of the exciton energy that are two times higher than indicated by spatially averaging confocal microscopy. Near-field PL spectra taken along nanotubes feature two distinct PL bands resulting from DNA-wrapped and unwrapped nanotube segments. The transition between the two energy levels occurs on a length scale smaller than our spatial resolution of about 15 nm.     

Near-Field Surface-Enhanced Raman Imaging of Dye-Labeled DNA with 100-nm Resolution

Raman chemical imaging on a scale of 100 nm is demonstrated for the first time. This is made possible by the combination of scanning near-field optical microscopy (SNOM or NSOM) and surface-enhanced Raman scattering (SERS), using brilliant cresyl blue (BCB)-labeled DNA as a sample. SERS substrates were produced by evaporating silver layers on Teflon nanospheres. The near-field SERS spectra were measured with an exposure time of 60 s and yielded good signal-to-noise ratios (25:1). The distinction between reflected light from the excitation laser and Raman scattered light allows the local sample reflectivity to be separated from the signal of the adsorbed DNA molecules. This is of general importance to correct for topographic coupling that often occurs in near-field optical imaging. The presented data show a lateral dependence of the Raman signals that points to special surface sites with particularly high SERS enhancement.     

Near-Field Photothermal Heating with a Plasmonic Nanofocusing Probe

Noble metal nanostructures support plasmon resonances—collective oscillation of charge carriers at optical frequencies—and serve as effective tools to create bright light sources at the nanoscale. These sources are useful in broad application areas including, super-resolution imaging and spectroscopy, nanolithography, and near-field optomechanical transducers. The feasibility of these applications relies on efficient conversion of free-space propagating light to plasmons. Recently, we demonstrated a hybrid nanofocusing scheme for efficient coupling of light to plasmons at the apex of a scanning probe. In the approach, free-space light is coupled to propagating surface plasmon polaritons (SPPs) on the tapered shaft of the scanning probe. The SPPs propagate adiabatically towards the probe tip where they are coupled to localized plasmons (LSPs). The nanofocusing scheme was explored in a near-field scanning optical microscope for super-resolution imaging, near-field transduction of nanomechanical vibrations, and local detection of ultrasound. Owing to the strong concentration of light at the probe, significant heating of the tip and a sample positioned in the optical near-field is expected. This paper investigates the local heating produced by the plasmonic nanofocusing probe under steady-state conditions using the tip-enhanced Raman scattering approach. In addition, a finite element model is explored to study the coupling of free propagating light to LSPs, and to estimate the temperature rise expected in a halfspace heated by absorption of the LSPs. This study has implications for exploring the plasmonic nanofocusing probe in heat-assisted nanofabrication and fundamental studies of nanoscale heat transport in materials.     

Turn on Nanolight in a Tiny Gap

A new low-temperature scanning tunneling microscopy technique with laser optics allows for optical excitation and spectroscopy at the level of a single atom or molecule. Shape and material of the microscope's tip prove essential for these investigations; thus, the tip is produced with nanoscale precision by Focused Ion-Beam milling. The localized surface plasmon properties of the tips are engineered by altering the tip structures providing spectral tunability. Local optical excitation is performed by a wavelength-tunable laser source. This tip-enhanced resonance Raman spectroscopy provides a new approach for the atomic-scale optical characterization of local electron-phonon coupling and could ultimately lead to new nanoscale optoelectronic devices with exceptional high sensitivity and efficiency.     

Light depolarization induced by metallic tips in apertureless near-field optical microscopy and tip-enhanced Raman spectroscopy

We have investigated the depolarization effects of light scattered by sharp tips used for apertureless near-field optical microscopy. Dielectric and metal coated tips have been investigated and depolarization factors between 5 and 30% have been measured, changing as a function of the incident light polarization and of the tip shape. The experimental results are in good agreement with theoretical calculations performed by the finite element method, giving a near-field depolarization factor close to 10%. The effect of depolarization has been investigated in polarized tip-enhanced Raman spectroscopy (TERS) experiments; the depolarization gives rise to forbidden Raman modes in Si crystals.     

Vectorial modeling of near-field imaging with uncoated fiber probes: transfer function and resolving power

Using exact 3D vectorial simulations of radiation coupling into uncoated dielectric fiber probes, we calculate amplitude transfer functions for conical single-mode fiber tips at the light wavelength of 633 nm. The coupling efficiency of glass fiber tips is determined in a wide range of spatial frequencies of the incident radiation for opening angles varying from 30 degrees to 120 degrees . The resolution in near-field imaging with these tips is considered for field distributions limited in both direct and spatial-frequency space. The characteristics of the transfer functions describing the relation between probed optical fields and near-field images are analyzed in detail. The importance of utilizing a perfectly sharp tip is also examined.     

Intracavity laser spectroscopy for the identification of nanomedia

The optical absorption and emission spectra of heterogeneous plasma formations involved in the thermal synthesis of carbon-based nanomaterials have been studied. A characteristic relationship between parameters of the plasma-assisted synthesis of carbon nanotubes (CNTs) and the spectrum of giant Raman scattering is revealed. Operation of the intracavity laser spectroscopy setup in a near-field microscopy (tip-enhanced Raman spectroscopy) regime was observed. In this regime, a CNT formed in the laser plasma plays the role of a probe capable of enhancing the intensity of emission due to the Raman scattering.     

Spatially resolved analysis of small particles by confocal Raman microscopy: depth profiling and optical trapping

Raman microscopy is a powerful method to provide spatially resolved information about the chemical composition of materials. With confocal collection optics, the method is well suited to the analysis of small particles, either resting on a surface or optically trapped at a laser focus, where the confocal collection volume optimizes the signal from the particle. In this work, the sensitivity and spatial selectivity of detecting Raman scattering from single particles was determined as a function of particle size. An inverted confocal Raman microscope was used to acquire spectra of individual surface-bound and optically trapped polystyrene particles with sizes ranging between 200 nm and 10 microm. The particles are in contact with aqueous solution containing perchlorate ion that served as a solution-phase Raman-active probe to detect interferences from the surrounding medium. The collection volume is scanned through single particles that are attached to the surface of the coverslip, and the sensitivity and selectivity of detection are measured versus particle size. The results compare favorably with a theoretical analysis of the excitation profile and confocal collection efficiency integrated over the volumes of the spherical particles and the surrounding solution. This analysis was also applied to the detection of particles that are optically trapped and levitated above the surface of the coverslip. The results are consistent with the optical trapping of particles at or near the excitation beam focus, which optimizes excitation and selective collection of Raman scattering from the particle.     

Simultaneous topographic and fluorescence imaging of single DNA molecules for DNA analysis with a scanning near-field optical/atomic force microscope.

High-resolution fluorescence imaging of lambda-phage DNA molecules, intercalated with the dye YOYO-1, has been performed by a SNOM/AFM based on a bent-type optical fiber probe. A modified design of the optical probe has been made, and successful near-field optical resolution has been obtained for the strongly stretched lambda-phage DNA molecules. The best optical resolution was estimated at 45 nm for the dye-intercalated single lambda-DNA molecules by a mean width evaluation. In our comparison between the far-field fluorescence and high-resolution near-field fluorescence images for the DNA, it has been found that the near-field images much better defined the intercalation state of the dye. Finally, the relation between the DNA shapes and the dye distribution states, and the discrimination between the double-stranded and single-stranded DNA molecules, are discussed by comparing the topography and fluorescence images of the SNOM/AFM.     

Nanoscale chemical imaging using top-illumination tip-enhanced Raman spectroscopy

We present a new top-illumination scheme for tip-enhanced Raman spectroscopy (TERS) in a gap-mode configuration with illumination and detection in a straightforward fashion perpendicular to the sample surface. This illumination focuses the light tightly around the tip end, which effectively diminishes far-field background contributions during TERS measurements. The setup maintains the entire functionality range of both the scanning probe microscopy and the confocal optical microscopy of the setup. For the first time, we show large (64 × 64 up to 200 × 200 pixels), high-resolution TERS imaging with full spectral information at every pixel, which is necessary for the chemical identification of sample constituents. With a scanning tunneling microscope tip and feedback, these TERS maps can be recorded with a resolution better than 15 nm (most likely even less, as discussed with Figure 6). An excellent enhancement (～10(7)×, sufficient for detection of few molecules) allows short acquisition times (<1 s/pixel) and reasonably low laser power (in the microwatt regime) yielding spectroscopic images with high pixel numbers in reasonable time (128 × 128 pixels in <25 min). To the best of our knowledge, no Raman maps with similar pixel numbers and full spectral information have ever been published.     

Fabrication and interfacial electronic structure studies on polypyrrole/TiO2 nano hybrid systems for photovoltaic aspects

The progress in studying the interfacial electronic structures of the developing new class of hybrid organic/inorganic material systems have envisaged a new dimension into the field of photovoltaics, which could be of great help in understanding the nature of charge transfer in them. In this regard, electropolymerization of pyrrole monomers have been carried out at room temperature on the surface of TiO2 working electrodes (assisted by UV radiations) and their interfacial electronic structure has been studied as a function of the applied photo anodic potentials. The formation of polypyrrole deposits has been ensured using FT-IR and Raman spectroscopy. Surface analysis of the hybrid matrix revealed the tendency of polymer molecules to cover up the spherical surface of TiO2 nanoparticles that could help in improving the light absorption rate. Signals (bands) corresponding to pyrrole molecules observed in the ultraviolet photoelectron spectroscopy measurements have been correlated with the polaronic states formed and identified to shift as a function of the applied photo anodic potentials, revealing the decrease in work function of the hybrid system to take place (confirmed using cyclic voltammetry measurements). The decreasing trend in the work function elucidates the adjustment in electronic structure of the system (hybrid materials possessing smaller work functions are generally preferred for photovoltaic studies). The aforementioned behavioural aspects have been reasoned with the increase in overpotential values for polarization, from the decrease in up-take rate of the anionic dopant, which increases the current density values, thereby modifying the conductivity of the systems.     

Acousto-plasmonic and surface-enhanced Raman scattering properties of coupled gold nanospheres/nanodisk trimers

This work is devoted to the fundamental understanding of the interaction between acoustic vibrations and surface plasmons in metallic nano-objects. The acoustoplasmonic properties of coupled spherical gold nanoparticles and nanodisk trimers are investigated experimentally by optical transmission measurements and resonant Raman scattering experiments. For excitation close to resonance with the localized surface plasmons of the nanodisk trimers, we are able to detect several intense Raman bands generated by the spherical gold nanoparticles. On the basis of both vibrational dynamics calculations and Raman selection rules, the measured Raman bands are assigned to fundamental and overtones of the quadrupolar and breathing vibration modes of the spherical gold nanoparticles. Simulations of the electric near-field intensity maps performed at the Raman probe wavelengths showed strong localization of the optical energy in the vicinity of the nanodisk trimers, thus corroborating the role of the interaction between the acoustic vibrations of the spherical nanoparticles and the surface plasmons of the nanodisk trimers. Acoustic phonons surface enhanced Raman scattering is here demonstrated for the first time for such coupled plasmonic systems. This work paves the way to surface plasmon engineering for sensing the vibrational properties of nanoparticles.     

Multimodal atomic force microscopy: Biological imaging using atomic force microscopy combined with light fluorescence and confocal microscopies and electrophysiologic recording

Because the atomic force microscope (AFM) allows molecular resolution imaging of hydrated specimens, it provides a unique window to the microscopic biological world. A high signal-to-noise ratio in AFM images sets them apart from the images obtained from other techniques: One does not need extensive image analyses often required by other techniques to obtain high-resolution information. AFM can provide molecular details on crystalline as well as amorphous materials. However, it is often limited in providing identity of the imaged structures, especially in a complex system such as a cellular membrane. AFM's application for biological imaging will rely on an unambiguous identification of imaged structures. For mixed macromolecules, it may be essential to make critical comparisons of the same structural features imaged with AFM and other techniques such as light fluorescence and confocal microscopies, electron microscopy and X-ray diffraction, and biochemical, immunologic, and pharmacologic techniques and electrophysiologic recordings. Significantly, the simple design of AFM allows it to be integrated with other techniques for simultaneous multimodal imaging. Recent combined multimodal imaging include light fluorescence, confocal, and near-field optical imaging as well as electrophysiologic recordings. Preliminary studies from such multimodal imaging include 1) an independent identification of macromolecules in a complex specimen using appropriately labeled markers such as fluorescent-dye labeled antibodies or dark-field microscopy; 2) imaging real-time reorganization of surface features using laser confocal and AFM; 3) a direct correlation of structural features and ion transfer via pores in a membrane; and 4) macromolecular complexes such as receptor-ligand and antigen-antibody. These features of a multimodal imaging system will provide new and significant avenues for a direct real-time structure-function correlation studies of biological macromolecules. © 1997 John Wiley & Sons, Inc. Int J Imaging Syst Technol, 8, 293–300, 1997     

Surface states in TiO2 submicrosphere films and their effect on electron transport

Owing to their special three-dimensional network structure and high specific surface area,TiO2 submicrospheres have been widely used as electron conductors in photoanodes for solar cells.In recent years,utilization of TiO2 submicrospheres in solar cells has greatly boosted the photovoltaic performance.Inevitably,however,numerous surface states in the TiO2 network affect electron transport.In this work,the surface states in TiO2 submicrospheres were thoroughly investigated by charge extraction methods,and the results were confirmed by the cyclic voltammetry method.The results showed that ammonia can effectively reduce the number of surface states in TiO2 submicrospheres.Furthermore,in-depth characterizations indicate that ammonia shifts the conduction band toward a more positive potential and improves the interfacial charge transfer.Moreover,charge recombination is effectively prevented.Overall,the cell performance is essentially dependent on the effect of the surface states,which affects the electron transfer and recombination process.     

Nanoscale optical imaging of excitons in single-walled carbon nanotubes

We present simultaneous near-field photoluminescence (PL) and Raman imaging of single-walled carbon nanotubes (SWNTs) with a spatial resolution better than 15 nm. Highly localized excitation is used to visualize the spatial extent of the contributing excited states. For SWNTs on glass, we typically observe highly confined PL from short segments of about 20 nm in length. The PL from micelle-encapsulated SWNTs on mica is extended along the tube up to several hundreds of nanometers. We find that near-field enhancement is much stronger for photoluminescence than for Raman scattering, an observation that is explained by the low intrinsic quantum yield of SWNTs.     

Optical near-field Raman imaging with subdiffraction resolution

We report optical near-field Raman imaging with subdiffraction resolution (approximately 120 nm) without field enhancement effects. Chemical discrimination on tetracyanoquinodimethane organic thin films showing localized salt complexes is accomplished by detailed Raman maps. Acquisition times that are much shorter than previously reported are due to the high Raman efficiency of the materials and to careful collection and detection of the optical signals in our near-field Raman spectrometer.     

Nanoscale uniaxial pressure effect of a carbon nanotube bundle on tip-enhanced near-field Raman spectra

In situ measurement of tip-enhanced near-field Raman spectra of an isolated single-wall carbon nanotube (SWNT) bundle has been demonstrated by applying a uniaxial pressure up to approximately 2 GPa to the bundle via a metal-coated atomic force microscope tip. We investigated the pressure dependences of Raman frequencies and the intensity of the radial breathing mode bands, the D-band and the G-band, which were related to deformation of SWNTs caused by the tip pressure.     

Enhancement of Raman signals with silver-coated tips

Silver coated SiN and SiO(2) tips have been fabricated for use with a bottom-illumination tip-enhanced Raman spectroscopy (TERS) setup with a 488 nm laser excitation. SiN tips with 50-60 nm of deposited Ag give the best TERS enhancements for brilliant cresyl blue test analyte spin-coated on a glass slide. Ag nanoparticles on SiN or SiO(2) rather than Si tips are better for TERS because of the proximity of the wavelengths of their surface plasmon resonance to 488 nm. Adjustments of tilt angle of the metallized tip with respect to the surface plane is shown to considerably raise the intensities of the TERS signals, even from tips that initially appear to be rather non-enhancing. This work helps to enable the more frequent use of the 488 nm laser for nanoscale chemical analysis with both TERS and fluorescence imaging in the same setup.     

Hyperspectral nanoscale imaging on dielectric substrates with coaxial optical antenna scan probes

We have demonstrated hyperspectral tip-enhanced Raman imaging on dielectric substrates using linearly polarized light and nanofabricated coaxial antenna tips. A full Raman spectrum was acquired at each pixel of a 256 by 256 pixel contact-mode atomic force microscope image of carbon nanotubes grown on a fused silica microscope coverslip, allowing D and G mode intensity and D-mode peak shifts to be measured with ～20 nm spatial resolution. Tip enhancement was sufficient to acquire useful Raman spectra in 50-100 ms. Coaxial scan probes combine the efficiency and enhanced, ultralocalized optical fields of plasmonically coupled antennae with the superior topographical imaging properties of sharp metal tips. The yield of the coaxial tip fabrication process is close to 100%, and the tips are sufficiently durable to support hours of contact-mode force microscope imaging. Our coaxial probes avoid the limitations associated with the "gap-mode" imaging geometry used in most tip-enhanced Raman studies to date, where a sharp metal tip is held ～1 nm above a metallic substrate with the sample located in the gap.     

Ion beam surface nanostructuring of noble metal films with localized surface plasmon excitation

Noble metal nanoparticles strongly adhered to dielectric matrices have been extensively studied because of their potential applications in plasmonic devices based on tunable localized surface plasmon (LSP) excitation. Compared with conventional synthesis methods, the noble metal nanoparticles formed by ion-beam irradiation draw significant interest in recent years because a single layer dispersion of nanoparticles strongly bonded on the dielectric substrate can be obtained. In this paper, important phenomena related to ion-beam surface nanostructuring including ion-induced reshaping of metal nanoparticles, ion-induced core-satellite structure formation, and ion-induced burrowing of these nanoparticles are discussed, with their individual effects on LSP excitation. Consequently, ion-induced surface nanostructuring of Ag-Au bimetallic films on amorphous silica glass and sapphire with tunable LSP excitation are presented. In addition, theoretical studies of far-field and near-field optical properties of these nanoparticles under ion irradiation are introduced, and the enhanced localized electric field (hot spot) is interpreted. Finally, the futures and challenges of the emerging plasmonic applications based on tunable LSP excitations in bio-sensing and surface enhanced Raman spectroscopy (SERS) are presented.