基于拥塞程度和能量状态的DSR路由协议的改进

无线Ad Hoc网络是由一些无线主机所组成的具有多跳、临时性等特征的网络,这些无线主机还带有无线收发装置;每个无线终端具有路由器和主机两种功能.网络中所有的节点地位平等.无线Ad Hoc网络组网的无基础设施性和自组织性,使它在特定的救灾抢险、军事指挥作战、野外科学考察等特殊场合下得到了广泛的应用.DSR路由协议具有使用源路由机制和路由缓存技术,并且支持中间节点路由回复应答,减少了路由开销等优点.文中主要解决了DSR路由协议节点拥塞、负载不均以及在选择路径时没有考虑节点的能量等问题,经仿真分析比原DSR路由协议在节点的拥塞状态和能量状态方面得到较大的改善.     

无线 Mesh 网络中多路径路由算法的研究

针对无线 Mesh 网络中传统单径路由协议的不足,提出一种基于动态源路由协议(DSR)的多路径路由算法(IDSR).该算法通过在路由发现过程引入带宽和最大转发次数等限制条件,保证了多条路由请求信息的获取;通过在节点不相交的多径选择过程中引入多 QoS 路由代价函数,有效地实现多路径的选择;通过提供多 QoS 保障,使算法具有较高的求解效率,避免了单径路由的不稳定等特点.实验结果表明,IDSR 算法在无线 Mesh 网络的路由中具有更好的 QoS 性能.     

一种安全的Ad Hoc On-demand路由协议

由于Ad Hoc网络固有的弱点,设计安全、有效的Ad Hoc路由协议是困难的.本文从新的角度设计了一个简单、安全的On-demand路由协议.在路径请求和响应阶段,源节点和目的节点的身份分别被隐藏,只有那些位于目的节点选择的最优路径上的节点可以获得完整的路由信息,从而产生有效的前向和反向路径.同时,一个公开的单向Hash函数可以利用隐藏的路由信息构建单向Hash链用于路由信息的认证,从而不需要预先的共享密钥.在一次路由计算中,只有源节点和目的节点需要进行一次非对称密码运算.     

移动自组网模糊逻辑QoS动态源路由算法

该文提出了一种新的移动Ad hoc网络QoS路由算法:模糊逻辑QoS动态源路由算法。算法从模糊理论的思想出发,将业务的多个QoS参数进行综合评判产生一类以语言变量描述的请求,在修改动态源路由协议为多径路由算法的基础之上,对比各条路径综合模糊路由状态,选择出最适合业务请求的路径。仿真显示算法在支持QoS的同时对移动Ad hoc网络因拓扑动态变化而引起的信息不精确性有很好的适应度。     

移动Ad Hoc网络中的QoS路由研究

移动自组网是一种无基础设施的无线多跳新型网络。如何在移动自组网中提供不同的QoS保证是其面临的一个重要问题，而QoS路由则是其中的核心技术和热点问题。目前研究人员已经提出了几种QoS路由协议．但都是通过在具体的路由协议中增加QoS参数约束路由来保证QoS，仍存在一些问题，需要进一步研究和改进。     

TDMA自组网的QoS设计

QoS设计是一个复杂的问题,IETF针对有线网络提出实现QoS的2种标准模型;然而在无线自组网中,由于隐终端、显终端问题的存在和带宽限制问题,有线网络使用的QoS模型略显繁琐并使实现无线QoS较为困难。通过对TDMA方式自组网的分析,使用跨层合并方法设计一个QoS路由协议,并得到集成服务模型在无线自组网络的一个实现。通过仿真,验证此路由协议设计的正确性,同时分析此协议性能,结果表明该路由协议高效可行。     

一种改进的基于能量优化的AODV路由协议

针对节点能量有限、消耗过快易导致网络分隔的问题,提出一种改进的基于能量优化的AODV路由协议(IEO-AODV)。以AODV路由协议为基础,通过综合考虑节点剩余能量和路由跳数进行路径选择,在路由过程中,中间节点在转发路由请求时进行一个与自身剩余能量有关延迟,在目的节点进行一个延迟记录,最后根据评估函数选取最优路由。仿真结果表明,与经典AODV相比,所改进的方案能均衡网络的能量消耗,在分组投递率、延长网络的生存时间等方面有较大的优势。     

AODV能量优化策略

针对传统的AODV路由协议采用扩展环路由搜索算法导致的路由开销较大,没有考虑节点能量的问题,提出一种新的算法。此算法在路由请求过程中能够根据以前搜索中得到的信息,让多余的节点处于静默状态,不参与下一次的路由发现。并且综合考虑节点能量,尽可能地让低能量节点处于静默状态,从而达到均衡节点能量使用的目的。仿真结果表明改进算法有效延长了网络生存时间,提高了包投递率。     

基于缓存队列的减少拥塞的Ad hoc路由算法

AODV路由协议为了快速地建立路由,允许拥有积极路由的中间节点响应路由请求,而不考虑该节点当时的负荷,容易造成节点拥塞丢包。针对这一问题,文章在AODV的基础上,提出了根据缓存队列长度选择路径的AODV_Q路由协议,优先选择负荷较轻的中间节点,使数据流不在某些节点上过于集中。另外,AODV_Q还引入路由回复应答机制,提高路由回复包的送达率。仿真结果表明AODV_Q明显优于AODV,能在吞吐量、延时、丢包率等方面综合提高网络性能。     

基于能量和负载均衡的AODV路由协议改进

在Ad Hoc网络中AODV路由协议是一个比较成熟且广泛接收的路由协议,具有较低的内存和处理开销,实现简单,但是AODV协议在能量和负载方面却存在着很大问题;针对这个问题提出无线Ad Hoc网络中基于AODV路由协议的能量和负载均衡的B-AODV协议。B-AODV协议考虑了节点的剩余能量和节点的已使用缓冲区大小两个度量,使之支持能量均衡和负载均衡,仿真结果表明B-AODV协议有效地均衡了AODV路由协议的能量消耗和节点的负载,延长了网络的生存时间,提高了包的传输率,充分利用了网络资源。     

Resolution Enhancement Technology:Integrated Process Solutions using OPC

DUV lithography, using the 248 nm wavelength, is a viable manufacturing option for devices with features at 130 nm and less. Given the low kl value of the lithography, integrated process development is a necessary method for achieving acceptable process latitude. The application of assist features for rule based OPC requires the simultaneous optimization of the mask, illumination optics and the resist.Described in this paper are the details involved in optimizing each of these aspects for line and space imaging.A reference pitch is first chosen to determine how the optics will be set. The ideal sigma setting is determined by a simple geometrically derived expression. The inner and outer machine settings are determined, in turn,with the simulation of a figure of merit. The maximum value of the response surface of this FOM occurs at the optimal sigma settings. Experimental confirmation of this is shown in the paper.Assist features are used to modify the aerial image of the more isolated images on the mask. The effect that the diffraction of the scattering bars (SBs) has on the image intensity distribution is explained. Rules for determining the size and placement of SBs are also given.Resist is optimized for use with off-axis illumination and assist features. A general explanation of the material' s effect is discussed along with the affect on the through-pitch bias. The paper culminates with the showing of the lithographic results from the fully optimized system.     

Cost-effective test solutions for smart card and other integrated flash applications

From its emergence in the late 1980s as a lower cost alternative to early EEPROM technologies, flash memory has evolved to higher densities and speedsand rapidly growing acceptance in mobile applications.In the process, flash memory devices have placed increased test requirements on manufacturers. Today, as flash device test grows in importance in China, manufacturers face growing pressure for reduced cost-oftest, increased throughput and greater return on investment for test equipment. At the same time, the move to integrated flash packages for contactless smart card applications adds a significant further challenge to manufacturers seeking rapid, low-cost test.     

Theoretical analysis of the relationship between the Brillouin gain coefficient and the strain in the optical-fiber sensors

The relation between the power of the Brillouin signal and the strain is one of the bases of the distributed fiber sensors of temperature and strain. The coefficient of the Bfillouin gain can be changed by the temperature and the strain that will affect the power of the Brillouin scattering. The relation between the change of the Brillouin gain coefficient and the strain is thought to be linear by many researchers. However, it is not always linear based on the theoretical analysis and numerical simulation. Therefore, errors will be caused if the relation between the change of the Brillouin gain coefficient and the strain is regarded as to be linear approximately for measuring the temperature and the strain. For this reason, the influence of the parameters on the Brillouin gain coefficient is proposed through theoretical analysis and numerical simulation.     

An improved parallel thinning algorithm with two subiterations

The parallel thinning algorithm with two subiterations is improved in this paper. By analyzing the notions of connected components and passes, a conclusion is drawn that the number of passes and the number of eight-connected components are equal. Then the expression of the number of eight-connected components is obtained which replaces the old one in the algorithm. And a reserving condition is proposed by experiments, which alleviates the excess deletion where a diagonal line and a beeline intersect. The experimental results demonstrate that the thinned curve is almost located in the middle of the original curve connectivelv with single pixel width and the processing speed is high.     

Novel fiber-optical interferometer with miniaturized probe for in-hole measurements

Today, micro-system technology and the development of new MEMS （Micro-Electro-Mechanical Systems） are emerging rapidly. In order for this development to become a success in the long run, measurement systems have to ensure product quality. Most often, MEMS have to be tested by means of functionality or destructive tests. One reason for this is that there are no suitable systems or sensing probes available which can be used for the measurement of quasi inaccessible features like small holes or cavities. We present a measurement system that could be used for these kinds of measurements. The system combines a fiber optical, miniaturized sensing probe with low-coherence interferometry, so that absolute distance measurements with nanometer accuracy are possible.     

Development of the readout system for waveguide multilayer optical card

Waveguide multilayer optical card （WMOC） is a novel storage device of three-dimensional optical information. An advanced readout system fitting for the WMOC is introduced in this paper. The hardware mainly consists of the light source for reading, WMOC, motorized stages addressing unit, microscope imaging unit, CCD detecting unit and PC controlling ＆ processing unit. The movement of the precision motorized stage is controlled by the computer through Visual Basic （VB） language in software. A control panel is also designed to get the layer address and the page address through which the position of the motorized stages can be changed. The WMOC readout system is easy to manage and the readout result is directly displayed on computer monitor.     

Study of waveguide coupling efficiency in hybrid silicon lasers

This paper presents a new method to increase the waveguide coupling efficiency in hybrid silicon lasers. We find that the propagation constant of the InGaAsP emitting layer can be equal to that of the Si resonant layer through improving the design size of the InP waveguide. The coupling power achieves 42% of the total power in the hybrid lasers when the thickness of the bonding layer is 100 nm. Our result is very close to 50% of the total power reported by Intel when the thickness of the thin bonding layer is less than 5 nm. Therefore, our invariable coupling power technique is simpler than Intel＇s.     

Collinear phase-matching study of terahertz-wave generation via difference frequency mixed in GaAs and Inp

The collinearly phase-matching condition of terahertz-wave generation via difference frequency mixed in GaAs and InP is theoretically studied. In collinear phase-matching, the optimum phase-matching wave hands of these two crystals are calculated. The optimum phase-matching wave bands in GaAs and lnP are 0.95-1.38μm and 0.7-0.96μm respectively. The influence of the wavelength choice of the pump wave on the coherent length in THz-wave tuning is also discussed. The influence of the temperature alteration on the phase-matching and the temperature tuning properties in GaAs crystal are calculated and analyzed. It can serve for the following experiments as a theoretical evidence and a reference as well.     

Effects of the alloy compositions on the phonon-polaritons in ternary mixed crystals

Composition dependence of bulk and surface phonon-polaritons in ternary mixed crystals are studied in the framework of the modified random-element-isodisplacement model and the Bom-Huang approximation. The numerical results for Several Ⅱ - Ⅵ and Ⅲ- Ⅴ compound systems are performed, and the polariton frequencies as functions of the compositions for ternary mixed crystals AlxGa1-xAs, GaPxAS1-x, ZnSxSe1-x, GaAsxSb1-x, GaxIn1-xP, and ZnxCd1-xS as examples are given and discussed. The results show that the dependence of the energies of two branches of bulk phonon-polaritons which have phonon-like characteristics, and surface phonon-polaritons on the compositions of ternary mixed crystals are nonlinear and different from those of the corresponding binary systems.     

New insert layer structure OLEDs

An insert layer structure organic electroluminescent device（OLED） based on a new luminescent material （Zn（salen）） is fabricated. The configuration of the device is ITO/CuPc/NPD/Zn（salen）/Liq/LiF/A1/CuPc/NPD/Zn（salen）/Liq/LiF/A1. Effective insert electrode layers comprising LiF（1nm）/Al（5 nm） are used as a single semitransparent mirror, and bilayer cathode LiF（1 nm）/A1（100 nm） is used as a reflecting mirror. The two mirrors form a Fabry-Perot microcavity and two emissive units. The maximum brightness and luminous efficiency reach 674 cd/m^2 and 2.652 cd/A, respectively, which are 2.1 and 3.7 times higher than the conventional device, respectively. The superior brightness and luminous efficiency over conventional single-unit devices are attributed to microcavity effect.