Measurement and source identification of polycyclic aromatic hydrocarbons (PAHs) in the aerosol in Xi'an, China, by using automated column chromatography and applying positive matrix factorization (PMF)

In this study, we measured polycyclic aromatic hydrocarbons (PAHs) in aerosols in Xi'an, China from 2005 to 2007, by using a modified Soxhlet extraction followed by a clean-up procedure using automated column chromatography followed by HPLC/fluorescence detection. The sources of PAHs were apportioned by using the positive matrix factorization (PMF) method. The PM₁₀ concentration in winter (161.1 ± 66.4 μg m^− 3, n = 242) was 1.5 times higher than that in summer (110.9 ± 34.7 μg m^− 3, n = 248). ΣPAH concentrations, which are the sum of the concentrations of all detected PAHs, in winter (344.2 ± 149.7 ng m^− 3, n = 45) was 2.5 times higher than that in summer (136.7 ± 56.7 ng m^− 3, n = 24) in this study. These strong seasonal variations in atmospheric PAH concentration are possibly due to coal combustion for residential heating. According to the source apportionment with PMF method in this study, the major sources of PAHs in Xi'an are categorized as (1) mobile sources such as vehicle exhaust that constantly contribute to PAH pollution, and (2) stationary sources such as coal combustion that have a large contribution to PAH pollution in winter.     

Temporal variation of nitro-polycyclic aromatic hydrocarbons in PM10 and PM2.5 collected in Northern Mexico City

With the aim to determine the presence of individual nitro-PAH contained in particles in the atmosphere of Mexico City, a monitoring campaign for particulate matter (PM₁₀ and PM_2.5) was carried out in Northern Mexico City, from April 2006 to February 2007. The PM₁₀ annual median concentration was 65.2 μg m^− 3 associated to 7.6 μg m^− 3 of solvent-extractable organic matter (SEOM) corresponding to 11.4% of the PM₁₀ concentration and 38.6 μg m^− 3 with 5.9 μg m^− 3 SEOM corresponding to 15.2% for PM_2.5. PM concentration and SEOM varied with the season and the particle size. The quantification of nitro-polycyclic aromatic hydrocarbons (nitro-PAH) was developed through the standards addition method under two schemes: reference standard with and without matrix, the former giving the best results. The recovery percentages varied with the extraction method within the 52 to 97% range depending on each nitro-PAH. The determination of the latter was effected with and without sample purification, also termed fractioning, giving similar results. 8 nitro-PAH were quantified, and their sum ranged from 111 to 819 pg m^− 3 for PM₁₀ and from 58 to 383 pg m^− 3 for PM_2.5, depending on the season. The greatest concentration was for 9-Nitroanthracene in PM₁₀ and PM_2.5, detected during the cold-dry season, with a median (10th-90th percentiles) concentration in 235 pg m^− 3 (66-449 pg m^− 3) for PM₁₀ and 73 pg m^− 3 (18-117 pg m^− 3) for PM_2.5. The correlation among mass concentrations of the nitro-PAH and criteria pollutants was statistically significant for some nitro-PAH with PM₁₀, SEOM in PM₁₀, SEOM in PM_2.5, NO_X, NO₂ and CO, suggesting either sources, primary or secondary origin. The measured concentrations of nitro-PAH were higher than those reported in other countries, but lower than those from Chinese cities. Knowledge of nitro-PAH atmospheric concentrations can aid during the surveillance of diseases (cardiovascular and cancer risk) associated with these exposures.     

A comprehensive assessment of PM emissions from paved roads: Real-world Emission Factors and intense street cleaning trials

Compliance with air quality standards requires control of source emissions: fine exhaust particles are already subject to regulation but vehicle fleets increase whilst the non-exhaust emissions are totally uncontrolled. Emission inventories are scarce despite their suitability for researchers and regulating agencies for managing air quality and PM reduction measures. Only few countries in Europe proposed street cleaning as a possible control measure, but its effectiveness is still far to be determined.This study offers first estimates of Real-world Emission Factors for PM₁₀ and brake-wear elements and the effect on PM₁₀ concentrations induced by intense street cleaning trials.A straightforward campaign was carried out in the city of Barcelona with hourly elemental composition of fine and coarse PM to detect any short-term effect of street cleaning on specific tracers of non-exhaust emissions. Samples were analyzed by Particle Induced X-Ray Emission.Real-world Emission Factor for PM₁₀ averaged for the local fleet resulted to be 97 mg veh^− 1 km^− 1. When compared to other European studies, our EF resulted higher than what found in UK, Germany, Switzerland and Austria but lower than Scandinavian countries. For brake-related elements, total EFs were estimated, accounting for the sum of direct and resuspension emissions, in 7400, 486, 106 and 86 μg veh^− 1 km^− 1, respectively for Fe, Cu, Sn and Sb. In PM_2.5Fe and Cu emission factors were respectively 4884 and 306 μg veh^− 1 km^− 1.Intense street cleaning trials evidenced a PM₁₀ reduction at kerbside of 3 μg m^− 3 (mean daily levels of 54 μg m^− 3), with respect to reference stations. It is important to remark that such benefit could only be detected in small time-integration periods (12:00-18:00) since in daily values this benefit was not noticed. Hourly PM elemental monitoring allowed the identification of mineral and brake-related metallic particles as those responsible of the PM₁₀ reduction.     

Exposure of children to airborne particulate matter of different size fractions during indoor physical education at school

Although moderate regular aerobic exercise is recommended for good health, adverse health consequences may be incurred by people who exercise in areas with high ambient pollution, such as in the centres of large cities with dense traffic. The exposure of children during exercise is of special concern because of their higher sensitivity to air pollutants. The size-segregated mass concentration of particulate matter was measured in a naturally ventilated elementary school gym during eight campaigns, seven to ten days long, from November 2005 through August 2006 in a central part of Prague (Czech Republic). The air was sampled using a five-stage cascade impactor. The indoor concentrations of PM_2.5 recorded in the gym exceeded the WHO recommended 24-hour limit of 25 μg m⁻³ in 50% of the days measured. The average 24-h concentrations of PM_2.5 (24.03 μg m⁻³) in the studied school room did not differ much from those obtained from the nearest fixed site monitor (25.47 μg m⁻³) and the indoor and ambient concentrations were closely correlated (correlation coefficient 0.91), suggesting a high outdoor-to-indoor penetration rate. The coarse indoor fraction concentration (PM_2.5–10) was associated with the number of exercising pupils (correlation coefficient 0.77), indicating that human activity is its main source. Considering the high pulmonary ventilation rate of exercising children and high outdoor particulate matter concentrations, the levels of both coarse and fine aerosols may represent a potential health risk for sensitive individuals during their physical education performed in naturally ventilated gyms in urban areas with high traffic intensity.     

The influence of long-range transport on atmospheric mercury on Jeju Island, Korea

The concentrations of total gaseous mercury (TGM) and relevant environmental parameters were measured at a remote area on Jeju Island, Korea from May 2006 to May 2007. The hourly mean concentration of Hg for the entire study period was 3.85 ± 1.68 ng m^− 3 (range of 0.10-17.9: n = 7450). The temporal patterns of Hg at the island site were characterized by the relative dominance in spring/fall over summer/winter and in daytime over nighttime. The possible impact of Asian dust (AD) on Hg distribution was examined by assessing its relationship with PM₁₀ data. Because of a strong inverse log-log correlation between Hg and PM₁₀ levels (above 200 µg m^− 3), a direct relationship between the two parameters is difficult to account for. However, the analysis of air mass movement patterns confirmed that the Hg levels on Jeju Island were affected most by the combined effects of major source processes in the surrounding areas: industrial and AD (China), industrial (Korea), and volcanic activity (Japan).     

Indoor/outdoor relationship of fine particles less than 2.5 μm (PM2.5) in residential homes locations in central Indian region

The high levels in developing countries and the apparent scale of its impact on the global burden of disease underline the importance of particulate as an environmental health risk and the consequence need for monitoring them particularly in indoor microenvironment. PM2.5 μm, 1.0 μm, 0.5 μm and 0.25 μm were measured inside and outside 14 residential homes located in different microenvironment during a six-month period (October 2007–March 2008) in Agra located in the central region of India. Particulate mass concentrations were measured using Grimm aerosol spectrometer for 24 h inside and outside the homes located in roadside, rural and urban area, along with the field survey study done in the same region. The indoor average concentrations recorded for PM_2.5, PM_1.0, PM_0.5 and PM_0.25 were maximum for the rural homes (173.03 μgm⁻³, 133.26 μgm⁻³, 96.02 μgm⁻³, 8.56 μgm⁻³) followed by roadside homes (137.93 μgm⁻³, 117.09 μgm⁻³, 68.17 μgm⁻³, 8.55 μgm⁻³) and then by urban homes (135.55 μgm⁻³, 102.92 μgm⁻³, 38.38 μgm⁻³, 6.35 μgm⁻³). The average I/O ratios for PM_2.5, PM_1.0, PM_0.5 and PM_0.25 in roadside and rural areas were close to or above 1.00 and less than 1.00 for urban areas. The I/O ratios obtained were linked to the indoor activities using occupant's diary entries. The positive values of correlation coefficient (r) also indicated the indoor concentrations of particulate matter were correlated with the corresponding outdoor concentrations.     

Exposure to fine particulate matter in ten night clubs in Athens Greece: Studying the effect of ventilation, cigarette smoking and resuspension

The aim of the present work is to study the occupants' exposure to fine particulate concentrations in ten nightclubs (NCs) in Athens, Greece. Measurements of PM₁ and PM_2.5 were made in the outdoor and indoor environment of each NC. The average indoor PM₁ and PM_2.5 concentrations were found to be 181.77 μg m^− 3 and 454.08 μg m^− 3 respectively, while the corresponding outdoor values were 11.04 μg m^− 3 and 32.19 μg m^− 3. Ventilation and resuspension rates were estimated through consecutive numerical experiments with an indoor air quality model and were found to be remarkably lower than the minimum values recommended by national standards. The relative effects of the ventilation and smoking on the occupants' exposures were examined using multiple regression techniques. It was found that given the low ventilation rates, the effect of smoking as well as the occupancy is of the highest importance. Numerical evaluations showed that if the ventilation rates were at the minimum values set by national standards, then the indoor exposures would be reduced at the 70% of the present exposure values.     

The tropical African mercury anomaly: lower than expected mercury concentrations in fish and human hair

Mercury is a neurotoxin and global pollutant, and wetlands and newly flooded areas are known to be sites of enhanced production of monomethylmercury, the form of mercury that is readily biomagnified in aquatic food chains to potentially toxic levels. The Okavango Delta in Botswana, Southern Africa, is the largest inland delta in the world and a wetland ecosystem that experiences dramatic annual flooding of large tracts of seasonal floodplains. The Delta was, therefore, expected to be home to high mercury levels in fish and to be an area where local subsistence fishing communities would be at substantial risk of mercury toxicity from fish consumption. Total mercury concentrations measured in 27 species of fish from the Okavango Delta averaged (mean ± s.d., wet weight) 19 ± 19 ng g⁻¹ in non-piscivorous fish, and 59 ± 53 ng g⁻¹ in piscivorous fish. These mercury concentrations are similar to those reported for fish from lakes in other areas of tropical Africa, demonstrating that not all wetlands are sites of elevated mercury concentrations in biota. Even more intriguing is that concentrations of mercury in fish from across tropical Africa are systematically and substantially lower than those typically reported for fish from freshwater ecosystems elsewhere globally. The reasons for this apparent “African mercury anomaly” are unclear, but this finding poses a unique opportunity to improve our understanding of mercury's biogeochemical cycling in the environment. Mercury concentrations measured in human hair collected in subsistence fishing communities in the Okavango Delta were similarly low (0.21 ± 0.22 μg g⁻¹ dry weight) despite high levels of fish consumption, and reflect the low mercury concentrations in the fish here.     

Toxic metals in the atmosphere in Lahore, Pakistan

Aerosol mass (PM₁₀ and PM_2.5) and detailed elemental composition were measured in monthly composites during the calendar year of 2007 at a site in Lahore, Pakistan. Elemental analysis revealed extremely high concentrations of Pb (4.4 μg m^− 3), Zn (12 μg m^− 3), Cd (0.077 μg m^− 3), and several other toxic metals. A significant fraction of the concentration of Pb (84%), Zn (98%), and Cd (90%) was contained in the fine particulate fraction (PM_2.5 and smaller); in addition, Zn and Cd were largely (≥ 60%) water soluble. The 2007 annual average PM₁₀ mass concentration was 340 μg m^− 3, which is well above the WHO guideline of 20 μg m^− 3. Dust sources were found to contribute on average (maximum) 41% (70%) of PM₁₀ mass and 14% (29%) of PM_2.5 mass on a monthly basis. Seasonally, concentrations were found to be lowest during the monsoon season (July-September). Principle component analysis identified seven factors, which combined explained 91% of the variance of the measured components of PM₁₀. These factors included three industrial sources, re-suspended soil, mobile sources, and two regional secondary aerosol sources likely from coal and/or biomass burning. The majority of the Pb was found to be associated with one industrial source, along with a number of other toxic metals including As and Cr. Cadmium, another toxic metal, was found at concentrations 16 times higher than the maximum exposure level recommended by the World Health Organization, and was concentrated in one industrial source that was also associated with Zn. These results highlight the importance of focusing control strategies not only on reducing PM mass concentration, but also on the reduction of toxic components of the PM as well, to most effectively protect human health and the environment.     

Multiple site study of recent atmospheric metal (Pb, Zn and Cu) deposition in the NW Iberian Peninsula using peat cores

In order to estimate atmospheric metal deposition in Southern Europe since the beginning of the Industrial Period (~ 1850 AD), concentration profiles of Pb, Zn and Cu were determined in four ²¹⁰Pb-dated peat cores from ombrotrophic bogs in Serra do Xistral (Galicia, NW Iberian Peninsula). Maximum metal concentrations varied by a factor of 1.8 for Pb and Zn (70 to 128 μg g⁻¹ and 128 to 231 μg g⁻¹, respectively) and 3.5 for Cu (11 to 37 μg g⁻¹). The cumulative metal inventories of each core varied by a factor of 3 for all analysed metals (132 to 329 μg cm⁻² for Pb, 198 to 625 μg cm⁻² for Zn and 22 to 69 μg cm⁻² for Cu), suggesting differences in net accumulation rates among peatlands. Although results suggest that mean deposition rates vary within the studied area, the enhanced ²¹⁰Pb accumulation and the interpretation of the inventory ratios (²¹⁰Pb/Pb, Zn/Pb and Cu/Pb) in two bogs indicated that either a record perturbation or post-depositional redistribution effects must be considered. After correction, Pb, Zn and Cu profiles showed increasing concentrations and atmospheric fluxes since the mid-XX^th century to maximum values in the second half of the XX^th century. For Pb, maximum fluxes were observed in 1955-1962 and ranged from 16 to 22 mg m⁻² yr⁻¹ (mean of 18 ± 1 mg m⁻² yr⁻¹), two orders of magnitude higher than in the pre-industrial period. Peaks in Pb fluxes in Serra do Xistral before the period of maximum consumption of leaded petrol in Europe (1970s-1980s) suggest the dominance of local pollutant sources in the area (i.e. coal mining and burning). More recent peaks were observed for Zn and Cu, with fluxes ranging from 32 to 52 mg m⁻² yr⁻¹ in 1989-1996, and from 4 to 9 mg m⁻² yr⁻¹ in 1994-2001, respectively. Our results underline the importance of multi-core studies to assess both the integrity and reliability of peat records, and the degree of homogeneity in bog accumulation. We show the usefulness of using the excess ²¹⁰Pb inventory to distinguish between differential metal deposition, accumulation or anomalous peat records.     

Biomonitoring of Cd, Cr, Hg and Pb in the Baluarte River basin associated to a mining area (NW Mexico)

With the purpose of knowing seasonal variations of Cd, Cr, Hg and Pb in a river basin with past and present mining activities, elemental concentrations were measured in six fish species and four crustacean species in Baluarte River, from some of the mining sites to the mouth of the river in the Pacific Ocean between May 2005 and March 2006. In fish, highest levels of Cd (0.06 μg g^− 1 dry weight) and Cr (0.01 μg g^− 1) were detected during the dry season in Gobiesox fluviatilis and Agonostomus monticola, respectively; the highest levels of Hg (0.56 μg g^− 1) were detected during the dry season in Guavina guavina and Mugil curema. In relation to Pb, the highest level (1.65 μg g^− 1) was detected in A. monticola during the dry season. In crustaceans, highest levels of Cd (0.05 μg g^− 1) occurred in Macrobrachium occidentale during both seasons; highest concentration of Cr (0.09 μg g^− 1) was also detected in M. occidentale during the dry season. With respect to Hg, highest level (0.20 μg g^− 1) was detected during the rainy season in Macrobrachium americanum; for Pb, the highest concentration (2.4 μg g^− 1) corresponded to Macrobrachium digueti collected in the dry season. Considering average concentrations of trace metals in surficial sediments from all sites, Cd (p < 0.025), Cr (p < 0.10) and Hg (p < 0.15) were significantly higher during the rainy season. Biota sediment accumulation factors above unity were detected mostly in the case of Hg in fish during both seasons. On the basis of the metal levels in fish and crustacean and the provisional tolerable weekly intake of studied elements, people can eat up to 13.99, 0.79 and 2.34 kg of fish in relation to Cd, Hg and Pb, respectively; regarding crustaceans, maximum amounts were 11.33, 2.49 and 2.68 kg of prawns relative to levels of Cd, Hg and Pb, respectively.     

Air pollution and meteorological processes in the growing dryland city of Urumqi (Xinjiang, China)

Seven years (2000-2006) of monthly PM₁₀ (particulate matter, d ≤ 10 μm), SO₂, and NO₂ concentrations are reported for Urumqi, the capital of Xinjiang in NW China. Considerably high mean annual concentrations have been observed, which ranged between 150 and 240 μg m^− 3 (PM₁₀), 31 and 50 μg m^− 3 (NO₂), and 49 and 160 μg m^− 3 (SO₂). The shapes of seasonal variation of all pollutants were remarkably similar; however, winter/summer ratios of concentrations were quite different for PM₁₀ (2-3) and NO₂ (≈ 4) compared to SO₂ (up to 30). Very high consumption rates of fossil fuels for energy generation and domestic heating are mainly responsible for high annual pollution levels, as well as the (very) high winter/summer ratios. Detailed analysis of the 2000-2006 records of Urumqi's meteorological data resulted in inter-annual and seasonal frequency distributions of (a) (surface) inversion events, (b) heights of surface inversions, (c) stability classes of Urumqi's boundary layer, and (d) the “Air Stagnation Index (ASI)”. Urumqi's boundary layer is shown to be characterized by high mean annual and seasonal frequencies of (surface) inversions and by the dominance of stable dispersion classes. A further outcome of the meteorological analysis is the proof of Urumqi's strong diurnal wind system, which might have particularly contributed to the stabilization of the nocturnal boundary layer. Annual and seasonal variations of pollutant's concentrations are discussed in the context of occurrences of inversions, boundary layer, stability classes, and ASI. The trend of Urumqi's air pollution indicates a strong increase of mean annual concentrations 2000-2003, followed by a slight increase during 2003-2006. These are in strong contrast to (a) the growth of Urumqi's fleet of motor vehicles and (b) to the growing number of stable regimes of Urumqi's boundary layer climate during same period. It is concluded that the (regional and) local administrative technical countermeasures have efficiently lowered Urumqi's air pollution levels.     

Chemical characterization of PM₁₀ and PM₂.₅ mass concentrations emitted by heterogeneous traffic

In this paper, the chemical characterization of PM₁₀ and PM_2.5 mass concentrations emitted by heterogeneous traffic in Chennai city during monsoon, winter and summer seasons were analysed. The 24-h averages of PM₁₀ and PM_2.5 mass concentrations, showed higher concentrations during the winter season (PM₁₀ = 98 μg/m³; PM_2.5 = 74 μg/m³) followed by the monsoon (PM₁₀ = 87 μg/m³; PM_2.5 = 56 μg/m³) and summer (PM₁₀ = 77 μg/m³; PM_2.5 = 67 μg/m³) seasons. The assessment of 24-h average PM₁₀ and PM_2.5 concentrations was indicated as violation of the world health organization (WHO standard for PM₁₀ = 50 μg/m³ and PM_2.5 = 25 μg/m³) and Indian national ambient air quality standards (NAAQS for PM₁₀ = 100 μg/m³ and PM_2.5 = 60 μg/m³).The chemicals characterization of PM₁₀ and PM_2.5 samples (22 samples) for each season were made for water soluble ions using Ion Chromatography (IC) and trace metals by Inductively Coupled Plasma Optical Emission Spectroscopy (ICP-OES) instrument. Results showed the dominance of crustal elements (Ca, Mg, Al, Fe and K), followed by marine aerosols (Na and K) and trace elements (Zn, Ba, Be, Ca, Cd, Co, Cr, Cu, Mn, Ni, Pb, Se, Sr and Te) emitted from road traffic in both PM₁₀ and PM_2.5 mass. The ionic species concentration in PM₁₀ and PM_2.5 mass consists of 47-65% of anions and 35-53% of cations with dominance of SO₄²⁻ ions. Comparison of the metallic and ionic species in PM₁₀ and PM_2.5 mass indicated the contributions from sea and crustal soil emissions to the coarse particles and traffic emissions to fine particles.     

Polar organic and inorganic markers in PM10 aerosols from an inland city of China — Seasonal trends and sources

Polar organic compounds and elements were quantified in PM₁₀ aerosols collected in urban and rural areas of Baoji, an inland city of China, during winter and spring 2008. Concentrations of biomass burning markers and high molecular weight n-alkanoic acids (HMW, > C_22:0) were heavily increased in winter. In contrast, sugars presented in higher levels in the spring, among which sucrose was the most abundant with an average of 219 ng m⁻³ in winter and 473 ng m⁻³ in spring respectively. This suggests enhanced biotic activity in the warm season, whereas no obvious trend was observed for sugar alcohols, concentrations of the three sugar alcohols in spring were only 0.94-2.3 times as those in winter, indicating a second pathway of their formation other than fungal spores in cold season. Major crustal elements (i.e., Fe, K, Mn and Ti) in PM₁₀ aerosols were also observed in larger concentrations in spring samples than those in winter due to an enhancement of coarse particles from soil minerals. By using principal component analysis (PCA) and positive matrix factorization (PMF), sources and their contributions to the PM components were also investigated in this study. Four factors were extracted with both models, and the sources represented by different factors were based on the highest loaded marker species as follows: factor 1, soil and road dust (Fe, Sr and Ti); factor 2, biomass burning (levoglucosan, galactosan and syringic acid); factor 3, microbial emissions (fructose and sucrose); and factor 4, fossil fuel combustion and fungal spores influence (Pb, Zn, arabitol and mannitol). The high correlation between PM₁₀ and factor 1 suggested that PM₁₀ pollution in Baoji was dominated by soil and dust re-suspension.     

Occurrence of arsenic in core sediments and groundwater in the Chapai-Nawabganj District, northwestern Bangladesh

Groundwater and core sediments of two boreholes (to a depth of 50 m) from the Chapai-Nawabganj area in northwestern Bangladesh were collected for arsenic concentration and geochemical analysis. Groundwater arsenic concentrations in the uppermost aquifer (10-40 m of depth) range from 2.8 μg L⁻¹ to 462.3 μg L⁻¹. Groundwater geochemical conditions change from oxidized to successively more reduced, higher As concentration with depth. Higher sediment arsenic levels (55 mg kg⁻¹) were found within the upper 40 m of the drilled core samples. X-ray absorption near-edge structure spectroscopy was employed to elucidate the arsenic speciation of sediments collected from two boreholes. Environmental scanning electron microscopy and transmission X-ray microscopy were used to investigate the characteristics of FeOOH in sediments which adsorb arsenic. In addition, a pH-Eh diagram was drawn using the Geochemist's Workbench (GWB) software to elucidate the arsenic speciation in groundwater. The dominant groundwater type is Ca-HCO₃ with high concentrations of As, Fe and Mn but low levels of NO₃⁻ and SO₄²⁻. Sequential extraction analysis reveals that Mn and Fe hydroxides and organic matter are the major leachable solids carrying As. High levels of arsenic concentration in aquifers are associated with fine-grained sediments. Fluorescent intensities of humic substances indicate that both groundwater and sediments in this arsenic hotspot area contain less organic matter compared to other parts of Bengal basin. Statistical analysis clearly shows that As is closely associated with Fe and Mn in sediments while As is better correlated with Mn in groundwater. These correlations along with results of sequential leaching experiments suggest that reductive dissolution of MnOOH and FeOOH mediated by anaerobic bacteria represents an important mechanism for releasing arsenic into the groundwater.     

Impact of land use on urban mobility patterns, emissions and air quality in a Portuguese medium-sized city

The main objective of this work was to evaluate the impact of urban development trends in mobility patterns of a medium sized Portuguese city and air quality consequences, using a sequential modeling process, comprising i) land use and transportation, TRANUS model; ii) road traffic air pollutants emissions, TREM model and; iii) air quality, TAPM model. This integrated methodology was applied to a medium sized Portuguese city. In order to evaluate the implementation of the methodology, a preliminary study was performed, which consisted on the comparison of modeled mobility patterns and CO and PM₁₀ concentrations with measured data used in the definition of the current scenario. The comparison between modeled and monitored mobility patterns at the morning peak hour for a weekday showed an RMSE of 31%. Regarding CO concentrations, an underestimation of the modeled results was observed. Nevertheless, the modeled PM₁₀ concentrations were consistent with the monitored data. Overall, the results showed a reasonable consistency of the modeled data, which allowed the use of the integrated modeling system for the study scenarios.The future scenarios consisted on the definition of different mobility patterns and vehicle technology characteristics, according to two main developing trends: (1) “car pooling” scenario, which imposes a mean occupancy rate of 3 passengers by vehicle and (2) the “Euro 6” scenario, which establishes that all vehicles accomplish at least the Euro 6 standard technology. Reductions of 54% and 83% for CO, 44% and 95% for PM₁₀, 44% and 87% for VOC and 44% and 79% for NO_x emissions were observed in scenarios 1 and 2, respectively. Concerning air quality, a reduction of about 100 μg m⁻³ of CO annual average concentration was observed in both scenarios. The results of PM₁₀ annual concentrations showed a reduction of 1.35 μg m⁻³ and 2.7 μg m⁻³ for scenarios 1 and 2 respectively.     

Chemically-speciated on-road PM2.5 motor vehicle emission factors in Hong Kong

PM_2.5 (particle with an aerodynamic diameter less than 2.5 µm) was measured in different microenvironments of Hong Kong (including one urban tunnel, one Hong Kong/Mainland boundary roadside site, two urban roadside sites, and one urban ambient site) in 2003. The concentrations of organic carbon (OC), elemental carbon (EC), water-soluble ions, and up to 40 elements (Na to U) were determined. The average PM_2.5 mass concentrations were 229 ± 90, 129 ± 95, 69 ± 12, 49 ± 18 µg m^− 3 in the urban tunnel, cross boundary roadside, urban roadside, and urban ambient environments, respectively. Carbonaceous particles (sum of organic material [OM] and EC) were the dominant constituents, on average, accounting for ∼ 82% of PM_2.5 emissions in the tunnel, ∼ 70% at the three roadside sites, and ∼ 48% at the ambient site, respectively. The OC/EC ratios were 0.6 ± 0.2 and 0.8 ± 0.1 at the tunnel and roadside sites, respectively, suggesting carbonaceous aerosols were mainly from vehicle exhausts. Higher OC/EC ratio (1.9 ± 0.7) occurred at the ambient site, indicating contributions from secondary organic aerosols. The PM_2.5 emission factor for on-road diesel-fueled vehicles in the urban area of Hong Kong was 257 ± 31 mg veh^− 1 km^− 1, with a composition of ∼ 51% EC, ∼ 26% OC, and ∼ 9% SO₄⁼. The other inorganic ions and elements made up ∼ 11% of the total PM_2.5 emissions. OC composed the largest fraction (∼ 51%) in gasoline and liquid petroleum gas (LPG) emissions, followed by EC (∼ 19%). Diesel engines showed higher emission rates than did gasoline and LPG engines for most pollutants, except for V, Br, Sb, and Ba.     

Trace metal concentrations in the North-western Mediterranean atmospheric aerosol between 1986 and 2008: Seasonal patterns and decadal trends

Climatic and anthropogenic changes are able to engender modifications in the aerosol composition at different geographical and temporal scales. The present study addresses this question for the trace metal concentrations (TM = Al, Fe, Mn, Co, Ni, Cu, Pb, Cd and Zn) of aerosol from the North-western Mediterranean coast of France (Cap Ferrat, nearby Nice) between 1986 and 2008. From seasonal variations (2006-08) and decadal trends (1986-2008) of TM concentrations, three groups of elements can be distinguished. They consist of different aerosol sources: crustal-derived elements (Al, Fe, Mn and Co), trace metals of anthropogenic origin (Pb, Cd and Zn) and a third, intermediate, group of trace metals that presented both anthropogenic and natural/crustal influences (Ni and Cu). Reproducible seasonal patterns were observed for crustal and intermediate elements with highest concentrations between May and November, while anthropogenic trace metals did not show a pronounced seasonal cycle. Nevertheless, highest concentrations of anthropogenic trace metals occurred mostly in autumn/winter. Aerosol concentrations of anthropogenic TMs decreased remarkably over the last two decades, while crustal trace metals did not show any evolution. Nickel and copper aerosol concentrations remained constant, as well. Lead concentrations decreased from 1986 (29.34 ng m^− 3) to 2008 (3.33 ng m^− 3), overall by 90%. Cadmium and zinc aerosol concentrations decreased by 66 and 54%, respectively, between 1998 and 2006-08, from 0.27 to 0.09 ng m^− 3 and from 23.9 to 10.9 ng m^− 3, respectively. These findings demonstrate the response of the atmospheric environment to the implementation of antipollution policies. Possible changes of trace metal emissions sources and local influences are discussed.     

The distribution of depleted uranium contamination in Colonie, NY, USA

Uranium oxide particles were dispersed into the environment from a factory in Colonie (NY, USA) by prevailing winds during the 1960s and '70s. Uranium concentrations and isotope ratios from bulk soil samples have been accurately measured using inductively coupled plasma quadrupole mass spectrometry (ICP-QMS) without the need for analyte separation chemistry. The natural range of uranium concentrations in the Colonie soils has been estimated as 0.7-2.1 μg g^− 1, with a weighted geometric mean of 1.05 μg g^− 1; the contaminated soil samples comprise uranium up to 500 ± 40 μg g^− 1. A plot of ²³⁶U/²³⁸U against ²³⁵U/²³⁸U isotope ratios describes a mixing line between natural uranium and depleted uranium (DU) in bulk soil samples; scatter from this line can be accounted for by heterogeneity in the DU particulate. The end-member of DU compositions aggregated in these bulk samples comprises (2.05 ± 0.06) × 10^− 3235U/²³⁸U, (3.2 ± 0.1) × 10^− 5236U/²³⁸U, and (7.1 ± 0.3) × 10^− 6234U/²³⁸U. The analytical method is sensitive to as little as 50 ng g^− 1 DU mixed with the natural uranium occurring in these soils. The contamination footprint has been mapped northward from site, and at least one third of the uranium in a soil sample from the surface 5 cm, collected 5.1 km NNW of the site, is DU. The distribution of contamination within the surface soil horizon follows a trend of exponential decrease with depth, which can be approximated by a simple diffusion model. Bioturbation by earthworms can account for dispersal of contaminant from the soil surface, in the form of primary uranium oxide particulates, and uranyl species that are adsorbed to organic matter. Considering this distribution, the total mass of uranium contamination emitted from the factory is estimated to be c. 4.8 tonnes.     

Environmental occurrence and degradation of the herbicide n-chloridazon

A sampling campaign was carried out for n-chloridazon (n-CLZ) and its degradation product desphenyl-chloridazon (DPC) in the Hesse region (Germany) during the year 2007: a total of 548 environmental samples including groundwater, surface water and wastewater treatment plant (WWTP) effluent were analysed. Furthermore, aerobic degradation of n-CLZ has been studied utilising a fixed bed bioreactor (FBBR).In surface water, n-CLZ was detected at low concentrations (average 0.01 ± 0.06 μg L⁻¹; maximum 0.89 μg L⁻¹) with a seasonal peak, whereas DPC was present throughout the year at much higher concentrations (average 0.72 ± 0.81 μg L⁻¹; maximum 7.4 μg L⁻¹). Higher n-CLZ concentrations were observed in the North compared with South Hesse, which is ascribed to a higher density of agricultural areas. Furthermore, methylated DPC (Me-DPC), another degradation product, was detected in surface water.In the degradation test, n-CLZ was completely converted to DPC at all concentrations tested (Me-DPC was not formed under the test conditions). DPC was resistant to further degradation during the whole experimental period of 98 days. The results obtained suggest persistence and high dispersion of DPC in the aquatic environment.