共查询到19条相似文献,搜索用时 890 毫秒
12.
《机电工程技术》2009,38(7):179-184
09-07-13 Research Progress of Polishing Hard Brittle Material by Laser
GUO Xiao-yan, LIU Xiao-fei(Zhongshan Torch Polytechnic, Zhongshan528436, China)
Abstract: The research background of polishing hard brittle material by laser and basic theoretical model are introduced in this paper. Then its mechanism is discussed and the influence factors on the polishing effect are summed up. Finally some predictions of its future development are presented. 相似文献
GUO Xiao-yan, LIU Xiao-fei(Zhongshan Torch Polytechnic, Zhongshan528436, China)
Abstract: The research background of polishing hard brittle material by laser and basic theoretical model are introduced in this paper. Then its mechanism is discussed and the influence factors on the polishing effect are summed up. Finally some predictions of its future development are presented. 相似文献
14.
《机电工程技术》2009,38(6):161-166
09-06-13 Requirements Analysis of CNC Machine Tool IETM System Based on UML JIANG Wei-wei, MA Shao-li, XU Ding-hai, GUO Hong- fen(1.Navy Academe of Armament, Beijing 100161, China; 2. Technical Support Engineering Department of Armored Force Engineering Academy, Beijing 100072, China) 相似文献
15.
16.
《机电工程技术》2009,38(8):207-212
09-08-13 Design of Injection Mould for DVD Door Panel Based on CAE Technology HUANG Gui-jian~, HONG Jian-ming, LIANG Xiong, WU Xiao-yu, LI Ji-bin (1. College of Mechatronics and Control Engineering, Shenzhen University, Shenzhen 518060, China; 2. School of Mechanical and Electrical Engineering, Shenzhen Polytechnic, Shenzhen518055, China; 3. Shenzhen Key Laboratory of Advanced Mould Manutacturing Technology, Shenzhen University, Shenzhen 5 t 8060, China)
Abstract: The structural feature and forming technology of the DVD door panel were analyzed. By using Moldflow/MPI software, the feed system of the mould was ascertained. The angle pin core-pulling mechanism was adopted and the mechanism set inside the core-pulling slide preventing the plastic parts from adhering to the side core of the mould was designed, so the smooth demoulding of the plastic parts was realized. The structure of the injection mould and working process were discussed. The mould was already in mass production and the plastic parts could meet the customers' technical requirements.
Key words: CAE; injection mould; feed system; core-pulling; slide; demoulding 相似文献
Abstract: The structural feature and forming technology of the DVD door panel were analyzed. By using Moldflow/MPI software, the feed system of the mould was ascertained. The angle pin core-pulling mechanism was adopted and the mechanism set inside the core-pulling slide preventing the plastic parts from adhering to the side core of the mould was designed, so the smooth demoulding of the plastic parts was realized. The structure of the injection mould and working process were discussed. The mould was already in mass production and the plastic parts could meet the customers' technical requirements.
Key words: CAE; injection mould; feed system; core-pulling; slide; demoulding 相似文献
18.
《机电工程技术》2009,38(5):123-126
09-05-13 Design of Injection Mould for Computer Button
XU Yong-jun, JIAN Jian-xiong(Dett.of Mechanical Engineering, Guangdong Vocational College of Industry and Commerce, Guangzhou510510, China)
Abstract: The technological characteristic of computer button, the design and condition of injection forming were analyzed. The key points in design and working process were stated in detail for realizing lateral core-pulling and assuring presentation quality.
Key words: computer button; injection mould; mould design 相似文献
XU Yong-jun, JIAN Jian-xiong(Dett.of Mechanical Engineering, Guangdong Vocational College of Industry and Commerce, Guangzhou510510, China)
Abstract: The technological characteristic of computer button, the design and condition of injection forming were analyzed. The key points in design and working process were stated in detail for realizing lateral core-pulling and assuring presentation quality.
Key words: computer button; injection mould; mould design 相似文献
19.
《机电工程技术》2009,38(9):159-164
A Survey on Job Shop Dynamic Scheduling;General Introduction of Penning Ion Source;Development of Communication Technology of Digital Substation; Research and Development on Nesting System of Metal Components Based on the Remaining Material; The Key Technologies Research on High- Speed Fan Impeller Mold of Remote Network-Based Distributed Collaborative Design' 相似文献