Electrical Properties of Sr0.7Ba0.3TiO3 Ceramics Doped with Nb2O5, 3Li2O · 2SiO2, and Bi2O3

The electrical properties of Sr_0.5Ba_0.3TiO₃ in the presence of Nb₂O₅ as a donor, 3Li₂O · 2SiO₂ as a sintering agent, and Bi₂O₃ as a dopant have been studied. When the compositions of the ceramics were 1 mol Sr_0.7Ba_0.3TiO₃+ 0.5 mol% Nb₂O₅+ 2 mol% 3Li₂O · 2SiO₂+ 0.2 mol% Bi₂O₃, the ceramics were sintered at 1100°C and exhibited the following characteristics: apparent dielectric constant ɛ, 25000; loss factor tan δ, 2%; insulating resistivity ρ_j, 10¹⁰Ω· cm; variation of dielectric constant with temperature Δɛ/ɛ (−25° to +85°C), +10%, −14%. ɛ and tan δ show only small changes with frequency. The study shows this ceramic can be used in multilayer technology.     

Fabrication and Electrical Properties of Textured Sr0.53Ba0.47Nb2O6 Ceramics by Templated Grain Growth

Textured Sr_0.53Ba_0.47Nb₂O₆ ceramics with a relative density of >95% were fabricated using templated grain growth (TGG). Acicular KSr₂Nb₅O₁₅ template particles synthesized via a molten salt process were aligned by tape casting in a mixture of solid-state-synthesized SrNb₂O₆ and BaNb₂O₆ powders. The resulting ceramics possessed strong fiber texture along the polar axis ([001]) of the strontium barium niobate. Samples with 15.4 wt% templates attained a textured fraction of 0.82 after sintering at a temperature of 1450°C for 4 h. These materials showed peak dielectric constants of 7550 at 1 kHz, remanent polarizations of 13.2 μC/cm², saturation polarizations of 21 μC/cm² (60%–85% of the single-crystal value), piezoelectric strain coefficients of 78 pC/N (70%–85% of the single-crystal value), and room-temperature pyroelectric coefficients of 2.9 × 10⁻²μC·(cm²·°C)⁻¹ (52% of the single-crystal value). These results show that TGG is a viable option for accessing single-crystal properties in polycrystalline ceramics.     

Crystallization Kinetics and Phase Development of PbO–BaO–SrO–Nb2O5–B2O3–SiO2-Based Glass–Ceramics

The nucleation and crystallization kinetics of PbO–BaO–SrO–Nb₂O₅–B₂O₃–SiO₂-based glass–ceramics have been investigated. Strontium barium niobate (Sr_0.33Ba_0.67Nb₂O₆) with a tetragonal tungsten–bronze structure formed as the major crystalline phase, which nucleates and grows on the surface region of samples. The results of the present study showed an apparent activation energy of 193 kJ/mol for nucleation, which was controlled by the viscous flow of the glass. Quantitative X-ray analysis and differential thermal analysis showed that the rate-limiting mechanism of crystallization appeared to be a three-dimensional interfacial growth, which has an apparent activation energy of 386–430 kJ/mol, a value that is close to the dissociation of Si–O bonds in the glass system.     

Synthesis of Strontium Barium Niobate Thin Films through Metal Alkoxide

Highly oriented Sr_0.5Ba_0.5Nb₂O₆ (SBN50) thin films have been prepared using a sol-gel method. A homogeneous and stable strontium barium niobate (Sr_1-xBa_xNb₂O₆, SBN) precursor solution could be prepared via the reaction control of metal alkoxides. The SBN precursor was stabilized by the coordination of the 2-ethoxyethoxy group to metals. SBN thin films on MgO(100) crystallized to a mixture of orthorhombic and tetragonal phase at 700°C and then transformed completely to the tetragonal phase of tungsten bronze at 1000°C. Two crystal lattice planes of SBN were intergrown at an orientation of 18.5° on MgO(100). SBN50 thin films on Pt(100)/MgO(100) substrates exhibited the P-E hysteresis.     

Molten Salt Synthesis of Anisotropic Sr2Nb2O7 Particles

Growth of Sr₂Nb₂O₇ particle size in KCl melts occurs by reaction on insoluble Nb₂O₅ particles in the melt. Thus, Sr₂Nb₂O₇ size is controlled by the initial size of the reactants. By altering the reactant composition to include larger Nb-rich reactants such as SrNb₂O₆, 5-30 µm, anisotropic Sr₂Nb₂O₇ particles are formed.     

Crystallization and Dielectric Properties of SrO–BaO–Nb2O5–SiO2 Tungsten-Bronze Glass-Ceramics

The crystallization and dielectric properties of SrO–BaO–Nb₂O₅–SiO₂ glass-ceramics have been investigated. Glass-ceramics that contain strontium barium niobate (SBN) as a primary crystalline phase, which has a tungsten bronze structure, are produced. The formation of crystalline secondary phases also has been studied. The SBN phase shows evidence of both surface nucleation and bulk nucleation, and the crystals have an average composition of Sr_0.47Ba_0.53Nb₂O₆. The dendritic morphology of the SBN crystals has been examined. The SBN content and composite dielectric constant each has been studied as a function of heating temperature/time. The highest SBN content and dielectric constant obtained in the present study are 42 vol% and 180, respectively. The dielectric constant of the glass-ceramics is determined primarily by the SBN content and the residual glass phase. The dielectric constant of the randomly oriented SBN crystal in the glass-ceramics is calculated, using dielectric mixture rules, to be ∼400.     

Fabrication of Grain-Oriented PbBi2Nb2O9

This paper describes a process for the fabrication of grain-oriented PbBi₂Nb₂O₉ ceramics. A molten salt technique was used to synthesize crystallites of PbBi₂Nb₂O₉ with a high degree of shape anisotropy. Tape casting and subsequent uniaxial hot-pressing resulted in ceramics with grain orientation of >90% with densities >96% theoretical.     

Effect of Seeding Sr2KNb5O15 on the Phase Formation and Microstructural Development in Reactive Sintering of Sr2NaNb5O15 Ceramics

The phase formation, densification behavior, and microstructure development of Sr₂NaNb₅O₁₅ (SNN) ceramics in both 10 wt% acicular Sr₂KNb₅O₁₅ (SKN) seed-containing and unseeded systems were investigated in this work. SNN ceramics were reactively sintered from SrNb₂O₆ and NaNbO₃ powders. The results show that the acicular SKN seeds not only accelerate SNN phase formation but also promote the densification at lower temperature. In reactive sintering, the acicular SKN seeds prepared by the molten salt synthesis method can give rise to the formation of a liquid phase and provide the structural framework for the grain growth of ceramics, leading to the formation of large anisotropic grains (>80 μm) in ceramics sintered at 1340°C. However, there are no such large anisotropic grains obtained in the SKN-free system. Observation of the large anisotropic grain growth is explained by the liquid-phase-assisted growth mechanism. For comparison, the microstructure evolution in the system with 10 wt% SKN seed, which was prepared by the conventional mixed-oxide method and without acicular morphology, was also investigated to further support the new growth mechanism.     

Nonisothermal Reaction Kinetics of SrNb2O6 and BaNb2O6 for the Formation of SrxBa1−xNb2O6

The solid-state reaction of SrNb₂O₆ and BaNb₂O₆ to form Sr _x Ba_{1− x} Nb₂O₆(SBN) at different temperatures and heating rates was investigated. The reaction kinetics were analyzed by X-ray diffractometry for quenched samples, and the internal-standard method was applied to quantify the extent of the reaction. A nonisothermal kinetic empirical model was proposed to evaluate the activation energy and rate constant of SBN with different Sr:Ba ratios. It was found that the kinetic form would change above and below a transition at a reaction fraction of ∼60%, which might be due to the change of the frequency factor. It was also verified that the model that was presented was more favorable to describe the nonisothermal reaction kinetics of SBN.     

Grain Growth of Microtubes During Sintering in Semiconducting Ba3Ce3−xBixTi5Nb5O30 (x=0.5, 1.0, 2.0, and 3.0) Ceramics

Well grown microtubes of Ba₃Ce_{3− x} Bi _x Ti₅Nb₅O₃₀ ( x =0.5, 1.0, 2.0, and 3.0) have been observed in the sintered ceramics. The microtubes have octagonal shapes at the cylindrical ends, hollow cores with diameters of 2–3 μm, lengths over a few tens of micrometers and wall thickness of 0.5–1.0 μm. In morphology, the tubes are very straight and are apparently welded to each other on the sides. The tubular growth as well as increase of wall thickness is observed to be more with greater Bi content, but when Ce is fully substituted by Bi, the tubes have grown into solid rods without hollowness. The growth spirals at the ends of tubes as seen by scanning electron microscope indicate that growth takes place in the longitudinal direction of the tubes. Observation of growth spirals on grains of a sintered ceramic is unusual. In fact, such features are usually seen in liquid phase growth and, therefore, we propose here grain growth in partially fluid conditions. The phase identification by X-ray diffraction shows that the compound has a tetragonal tungsten bronze type structure. The resistivity measurements above room temperature indicate that these compounds are semiconductors and both resistivity and activation energy increase with Bi content.     

Grain-Oriented Bi4Ti3O12 Ferroelectric Ceramics Prepared by Magnetic Alignment

Grain-oriented ferroelectric ceramics are desirable for many applications, but developing a mass-production method for such kinds of ceramics remains a significant challenge. In the current study, we report a convenient approach combining magnetic alignment and gelcasting to prepare grain-oriented ceramics without applied pressure and templates. This method was found to be effective to prepare highly a–b plane-oriented Bi₄Ti₃O₁₂ ferroelectric ceramics and subsequently enhance the dielectric properties. We used the conventional ceramic process, i.e., solid-state synthesis, gelcasting forming technique, and pressureless sintering except for the application of a 10 T magnetic field. Indeed, such an approach should facilitate the mass production of large and dense grain-oriented ceramic materials.     

Morphology-Controlled Synthesis and Characterization of Sr2Nb2O7 Nanocrystalline Powders by a Hydrothermal Process

Nanostructured Sr₂Nb₂O₇ powders with different morphologies were synthesized via a hydrothermal reaction at 200°C for 24 h in a Sr²⁺–Nb₂O₅· n H₂O–KOH system. X-ray powder diffraction characterization indicated that 0.3–5 M KOH solutions favored the formation of a Sr₂Nb₂O₇ pure phase. On increasing the concentration of KOH from 0.3 to 5 M , the morphology of Sr₂Nb₂O₇ samples changed from nanoneedles to nanorods, nanosheets, and finally nano-sized flakes, and their aspect ratios gradually reduced. Ultraviolet–Visible diffuse reflectance spectra analyses showed that the nanostructured Sr₂Nb₂O₇ powders had good light absorption properties in the ultraviolet light region.     

Ferroelectric and Piezoelectric Properties of Na1−xBaxNb1−xTixO3 Ceramics

Piezoelectric ceramics Na_{1− x} Ba _x Nb_{1− x} Ti _x O₃ with low BaTiO₃ concentrations x have been prepared by the solid-state reaction method, and their ferroelectric and piezoelectric properties have been studied. The ceramics are classic ferroelectrics when x ≤0.10, and the ferroelectric–paraelectric phase transition becomes diffusive when x ≥0.15. A low doping level of BaTiO₃ changes the NaNbO₃ ceramics from antiferroelectric to ferroelectric. With the increase in BaTiO₃ doping level, the Curie temperature of ceramics decreases linearly and the remnant polarization and coercive field also decrease, while their dielectric constant increases. Na_0.9Ba_0.1Nb_0.9Ti_0.1O₃ ceramics show the largest piezoelectric constant d ₃₃ (147 pC/N) and good sinterability, suggesting that it is a good candidate for lead-free piezoelectric ceramics.     

Chemical Processing of Potassium-Substituted Strontium Barium Niobate Thin Films through Metallo-organics

Transparent and highly oriented K _x (Sr_0.5Ba_0.5)_{1− x /2}Nb₂O₆ ( x = 0.2, 0.4) (KSBN) thin films have been synthesized by a chemical solution deposition method. A homogeneous and stable KSBN precursor solution was prepared by controlling the reaction of metallo-organics. K_0.4Sr_0.4Ba_0.4Nb₂O₆ ( x = 0.4, K_0.4SBN50) and K_0.2Sr_0.45Ba_0.45Nb₂O₆ ( x = 0.2, K_0.2SBN50) powders and thin films directly crystallized to the tetragonal tungsten bronze phase above 600°C. The thin films were crystallized on MgO(100) and Pt(100)/MgO(100) with c -axis preferred orientation. Two crystal lattice planes of K_0.4SBN50 and K_0.2SBN50 were intergrown at an orientation of 18.5° on MgO(100) and Pt(100)/MgO(100). K_0.4SBN50 thin film on Pt(100)/MgO(100) showed the typical hysteresis loop ( P _r= 22 µC/cm², E _c= 99 kV/cm at −190°C). The change in remnant polarization with temperature is strongly related to the diffuse phase transition of the epsilon- T curves.     

Tailoring the Microwave Dielectric Properties of MgNb2O6 and Mg4Nb2O9 Ceramics

The columbites MgNb₂O₆, MgTa₂O₆, and corundum-type Mg₄Nb₂O₉ ceramics were prepared by the conventional solid-state ceramic route. The structure and microstructure of the sintered samples were investigated by X-ray diffraction and scanning electron microscopic techniques. The microwave dielectric properties of the samples were measured by the resonance method in the frequency range 4–6 GHz. The dielectric properties have been tailored by forming a solid solution between MgNb₂O₆ and MgTa₂O₆ and by the substitution of TiO₂ for Nb₂O₅ in both MgNb₂O₆ and Mg₄Nb₂O₉ ceramics. The Mg(Nb_0.7Ta_1.3)O₆ has ɛ_r=29, Q _u× f =67 800 GHz, and τ_f=0.8 ppm/°C and the MgO–(0.4)Nb₂O₅–(1.5)TiO₂ composition has ɛ_r=34.5, Q _u× f =81 300 GHz, and τ_f=−2 ppm/°C.     

Effect of Sintering Aids on Microstructures and PTCR Characteristics of (Sr0.2Ba0.8)TiO3 Ceramics

The effects of liquid-phase sintering aids on the microstructures and PTCR characteristics of (Sr_0.2Ba_0.8)TiO₃ materials have been studied. The grain size of sintered materials monotonically decreases with increasing content of Al₂O₃–SiO₂–TiO₂ (AST). The ultimate PTCR properties with ρ_ht/ρ_rt as great as 10^5.61 are obtained for fine-grain (10-μm) samples, which contain 12.5 mol% AST and were sintered at 1350°C for 1.5 h. The quantity of liquid phase formed due to eutectic reaction between AST and (Sr,Ba)TiO₃ is presumably the prime factor in determining the grain size of samples. The grains grow rapidly at the sintering temperature in the first stage until the liquid phase residing at the grain boundaries reaches certain critical thickness such that the liquid–solid interfacial energy dominates the mechanism of grain growth.     

Near-Net Shape β-Si4Al2O2N6 Parts by Hydrolysis Induced Aqueous Gelcasting Process

In this paper, a new net-shaping process, an hydrolysis-induced aqueous gelcasting (GC) (GCHAS) has been reported for consolidation of β-Si₄Al₂O₂N₆ ceramics from aqueous slurries containing 48–50 vol%α-Si₃N₄, α-Al₂O₃, AlN, and Y₂O₃ powders mixture. Dense ceramics of same composition were also consolidated by aqueous GC and hydrolysis assisted solidification routes. Among three techniques used, the GCHAS process was found to be superior for fabricating defect-free thin wall β-Si₄Al₂O₂N₆ crucibles and tubes. Before use, the as purchased AlN powder was passivated against hydrolysis. The sintered β-Si₄Al₂O₂N₆ ceramics exhibited comparable properties with those reported for similar materials in the literature.     

Microstructure and Piezoelectric Properties of (1−x)(Na0.5K0.5)NbO3–xLiNbO3 Ceramics

(1− x )(Na_0.5K_0.5)NbO₃– x LiNbO₃ [(1− x )NKN– x LN] ceramics were produced by the conventional solid-state sintering method, and their microstructure and piezoelectric properties were investigated. The formation of the liquid phase and K₆Li₄Nb₁₀O₃₀ second phase that were observed in the (1− x )NKN– x LN ceramics was explained by the evaporation of Na₂O during the sintering. A morphotropic phase boundary (MPB) was observed in the specimens with 0.05< x <0.08. Promising piezoelectric properties were obtained for the specimens with x =0.07. Therefore, the piezoelectric properties of this 0.93NKN–0.07LN ceramic were further investigated and were found to be influenced by their relative density and grain size. In particular, grain size considerably affected the d ₃₃ value. Two-step sintering was conducted at different temperatures to increase the grain size. Piezoelectric properties of d ₃₃=240 (pC/N) and k _p=0.35 were obtained for the 0.93NKN–0.07LN ceramics sintered at 1030°C and subsequently annealed at 1050°C.     

Microstructure Development in Reactive-Templated Grain Growth of Bi1/2Na1/2TiO3-Based Ceramics: Template and Formulation Effects

"Reactive-templated grain growth" (RTGG) processing of Bi_1/2Na_1/2TiO₃ (BNT)-based ceramics is reported. Molten salt synthesis was used to prepare platelike (∼0.2 μm × 5 μm × 5 μm) Ruddlesden–Popper (Sr₃Ti₂O₇ (ST)) and Aurivillius (BaBi₂Nb₂O₉ (BBN)) phases which were used as "templates" in studies of RTGG with BNT-based matrixes. A "citrate-gel" route was designed to produce intimately mixed, fine-grain matrixes for these studies. The analytical techniques used were powder X-ray diffraction and microstructural examination of dry-pressed and fired compacts. For mixtures templated with BBN, single-phase perovskite readily formed, and an initially heterogeneous microstructure evolved toward a dense assemblage of anisometric, micrometer-scale grains. Perovskite formation was more sluggish in the mixtures templated with ST, and the final sintered microstructure featured larger, porous grains in an equiaxed, micrometer-scale matrix. A qualitative model, which examined the excess constituents in the matrix after formation of stoichiometric ABO₃ perovskite, is proposed to explain the observations. The model predicted an excess of Na₂O and TiO₂ in the matrix in the case of BBN templates and only excess TiO₂ in the case of ST templates. The results indicate that careful examination of matrix and template chemistry could be important in the selection of systems for RTGG processing.     

Atmospheric Dependence on Dielectric Loss of 1/6Ba5Nb4O15· 5/6BaNb2O6 Ceramics

Samples of 1/6Ba₅Nb₄O₁₅·5/6BaNb₂O₆ along with the pure end members, Ba₅Nb₄O₁₅ and BaNb₂O₆, were sintered under low oxygen partial pressure. The degradation mechanisms of dielectric loss in this reducing atmosphere have been studied. We found that the degradation occurred primarily due to the formation of oxygen vacancies caused by the reduction of Nb⁵⁺. This was determined by measuring the electrical conductivity, and through X-ray photoelectron spectroscopy. More importantly, the dielectric loss of 1/6Ba₅Nb₄O₁₅·5/6BaNb₂O₆ samples with higher temperature stability was further decreased on sintering in a reducing atmosphere. This observation has been explained by considering the increased porosity and formation of a reduced second phase, Ba_0.65NbO₃.