Flower pollination algorithm: A novel approach for multiobjective optimization

Multiobjective design optimization problems require multiobjective optimization techniques to solve, and it is often very challenging to obtain high-quality Pareto fronts accurately. In this article, the recently developed flower pollination algorithm (FPA) is extended to solve multiobjective optimization problems. The proposed method is used to solve a set of multiobjective test functions and two bi-objective design benchmarks, and a comparison of the proposed algorithm with other algorithms has been made, which shows that the FPA is efficient with a good convergence rate. Finally, the importance for further parametric studies and theoretical analysis is highlighted and discussed.     

Metamodel Assisted Evolutionary Algorithm for Multi-objective Optimization of Non-steady Metal Forming Problems

Multiobjective optimization problems are considered in the field of nonsteady metal forming processes, such as forging or wire drawing. The Pareto optimal front of the problem solution set is calculated by a Genetic Algorithm. In order to reduce the inherent computational cost of such algorithms, a surrogate model is developed and replaces the exact the function simulations. It is based on the Meshless Finite Difference Method and is coupled to the NSGAII Evolutionary Multiobjective Optimization Algorithm, in a way that uses the merit function. This function offers the best way to select new evaluation points: it combines the exploitation of obtained results with the exploration of parameter space. The algorithm is evaluated on a wide range of analytical multiobjective optimization problems, showing the importance to update the metamodel along with the algorithm convergence. The application to metal forming multiobjective optimization problems show both the efficiency of the metamodel based algorithms and the type of practical information that can be derived from a multiobjective approach.     

Level Diagrams analysis of Pareto Front for multiobjective system redundancy allocation

Reliability-based and risk-informed design, operation, maintenance and regulation lead to multiobjective (multicriteria) optimization problems. In this context, the Pareto Front and Set found in a multiobjective optimality search provide a family of solutions among which the decision maker has to look for the best choice according to his or her preferences. Efficient visualization techniques for Pareto Front and Set analyses are needed for helping decision makers in the selection task.In this paper, we consider the multiobjective optimization of system redundancy allocation and use the recently introduced Level Diagrams technique for graphically representing the resulting Pareto Front and Set. Each objective and decision variable is represented on separate diagrams where the points of the Pareto Front and Set are positioned according to their proximity to ideally optimal points, as measured by a metric of normalized objective values. All diagrams are synchronized across all objectives and decision variables. On the basis of the analysis of the Level Diagrams, we introduce a procedure for reducing the number of solutions in the Pareto Front; from the reduced set of solutions, the decision maker can more easily identify his or her preferred solution.     

MONSS: A multi-objective nonlinear simplex search approach

This article presents a novel methodology for dealing with continuous box-constrained multi-objective optimization problems (MOPs). The proposed algorithm adopts a nonlinear simplex search scheme in order to obtain multiple elements of the Pareto optimal set. The search is directed by a well-distributed set of weight vectors, each of which defines a scalarization problem that is solved by deforming a simplex according to the movements described by Nelder and Mead's method. Considering an MOP with n decision variables, the simplex is constructed using n+1 solutions which minimize different scalarization problems defined by n+1 neighbor weight vectors. All solutions found in the search are used to update a set of solutions considered to be the minima for each separate problem. In this way, the proposed algorithm collectively obtains multiple trade-offs among the different conflicting objectives, while maintaining a proper representation of the Pareto optimal front. In this article, it is shown that a well-designed strategy using just mathematical programming techniques can be competitive with respect to the state-of-the-art multi-objective evolutionary algorithms against which it was compared.     

A surrogate-based multiobjective metaheuristic and network degradation simulation model for robust toll pricing

Robust transportation network design problems generally rely on systems engineering methods that share common research gaps. First, problem sizes are constrained due to the use of multi-objective solution algorithms that are notoriously inefficient due to computationally expensive function evaluations. Second, link disruptions at a network level are difficult to model realistically. In this paper, a stochastic search metaheuristic based on radial basis functions is proposed for constrained multiobjective problems. It is proven to converge, and compared with conventional metaheuristics for four representative test problems. A scenario simulation method based on multivariate Bernoulli random variables that accounts for correlations between link failures is proposed to sample scenarios for a mean-variance toll pricing problem. Four tests are conducted on the classical Sioux Falls network to gain some insights into the algorithm, the simulation model, and to the robust toll pricing problem. The first test empirically measures the efficiency of the simulation algorithm and approximate Pareto set by obtaining a standard error in the ε-indicator measure for a given number of scenarios and iterations. The second test compares the dominance of the proposed heuristic’s solutions with a conventional multiobjective genetic algorithm by comparing the average ε-indicator. The third test quantifies the gap due to falsely assuming that link failures are independent of each other when they are not. The last test quantifies the value of having the flexibility to adapt a Pareto set of toll pricing solutions to changing probability regimes such as peak and off-peak hurricane or snow seasons.     

Microgenetic multiobjective reconfiguration algorithm considering power losses and reliability indices for medium voltage distribution network

This study proposes and applies an evolutionary-based approach for multiobjective reconfiguration in electrical power distribution networks. In this model, two types of indicators of power quality are minimised: (i) power system's losses and (ii) reliability indices. Four types of reliability indices are considered. A microgenetic algorithm ('GA) is used to handle the reconfiguration problem as a multiobjective optimisation problem with competing and non-commensurable objectives. In this context, experiments have been conducted on two standard test systems and a real network. Such problems characterise typical distribution systems taking into consideration several factors associated with the practical operation of medium voltage electrical power networks. The results show the ability of the proposed approach to generate well-distributed Pareto optimal solutions to the multiobjective reconfiguration problem. In the systems adopted for assessment purposes, our proposed approach was able to find the entire Pareto front. Furthermore, better performance indexes were found in comparison to the Pareto envelope-based selection algorithm 2 (PESA 2) technique, which is another well-known multiobjective evolutionary algorithm available in the specialised literature. From a practical point of view, the results established, in general, that a compact trade-off region exists between the power losses and the reliability indices. This means that the proposed approach can recommend to the decision maker a small set of possible solutions in order to select from them the most suitable radial topology.     

Trade-off analysis approach for interactive nonlinear multiobjective optimization

When solving multiobjective optimization problems, there is typically a decision maker (DM) who is responsible for determining the most preferred Pareto optimal solution based on his preferences. To gain confidence that the decisions to be made are the right ones for the DM, it is important to understand the trade-offs related to different Pareto optimal solutions. We first propose a trade-off analysis approach that can be connected to various multiobjective optimization methods utilizing a certain type of scalarization to produce Pareto optimal solutions. With this approach, the DM can conveniently learn about local trade-offs between the conflicting objectives and judge whether they are acceptable. The approach is based on an idea where the DM is able to make small changes in the components of a selected Pareto optimal objective vector. The resulting vector is treated as a reference point which is then projected to the tangent hyperplane of the Pareto optimal set located at the Pareto optimal solution selected. The obtained approximate Pareto optimal solutions can be used to study trade-off information. The approach is especially useful when trade-off analysis must be carried out without increasing computation workload. We demonstrate the usage of the approach through an academic example problem.     

Optimal feeding profile in fed-batch bioreactors using a genetic algorithm

An optimal feeding profile for a fed-batch process was designed based on an evolutionary algorithm. Usually the presence of multiple objectives in a problem leads to a set of optimal solutions, commonly known as Pareto-optimal solutions. Evolutionary algorithms are well suited for deriving multi-objective optimisation since they evolve a set of non-dominated solutions distributed along the Pareto front. Several evolutionary multi-objective optimisation algorithms have been developed, among which the Non-dominated Sorting Genetic Algorithm NSGA-II is recognised to be very effective in overcoming a variety of problems. To demonstrate the applicability of this technique, an optimal control problem from the literature was solved using several methods considering the single-objective dynamic optimisation problem.     

An extension of the directed search domain algorithm to bilevel optimization

A method is developed for generating a well-distributed Pareto set for the upper level in bilevel multiobjective optimization. The approach is based on the Directed Search Domain (DSD) algorithm, which is a classical approach for generation of a quasi-evenly distributed Pareto set in multiobjective optimization. The approach contains a double-layer optimizer designed in a specific way under the framework of the DSD method. The double-layer optimizer is based on bilevel single-objective optimization and aims to find a unique optimal Pareto solution rather than generate the whole Pareto frontier on the lower level in order to improve the optimization efficiency. The proposed bilevel DSD approach is verified on several test cases, and a relevant comparison against another classical approach is made. It is shown that the approach can generate a quasi-evenly distributed Pareto set for the upper level with relatively low time consumption.     

A Swarm Metaphor for Multiobjective Design Optimization

This paper presents a new optimization algorithm to solve multiobjective design optimization problems based on behavioral concepts similar to that of a real swarm. The individuals of a swarm update their flying direction through communication with their neighboring leaders with an aim to collectively attain a common goal. The success of the swarm is attributed to three fundamental processes: identification of a set of leaders, selection of a leader for information acquisition, and finally a meaningful information transfer scheme. The proposed algorithm mimics the above behavioral processes of a real swarm. The algorithm employs a multilevel sieve to generate a set of leaders, a probabilistic crowding radius-based strategy for leader selection and a simple generational operator for information transfer. Two test problems, one with a discontinuous Pareto front and the other with a multi-modal Pareto front is solved to illustrate the capabilities of the algorithm in handling mathematically complex problems. Three well-studied engineering design optimization problems (unconstrained and constrained problems with continuous and discrete variables) are solved to illustrate the efficiency and applicability of the algorithm for multiobjective design optimization. The results clearly indicate that the swarm algorithm is capable of generating an extended Pareto front, consisting of well spread Pareto points with significantly fewer function evaluations when compared to the nondominated sorting genetic algorithm (NSGA).     

Pareto navigator for interactive nonlinear multiobjective optimization

We describe a new interactive learning-oriented method called Pareto navigator for nonlinear multiobjective optimization. In the method, first a polyhedral approximation of the Pareto optimal set is formed in the objective function space using a relatively small set of Pareto optimal solutions representing the Pareto optimal set. Then the decision maker can navigate around the polyhedral approximation and direct the search for promising regions where the most preferred solution could be located. In this way, the decision maker can learn about the interdependencies between the conflicting objectives and possibly adjust one’s preferences. Once an interesting region has been identified, the polyhedral approximation can be made more accurate in that region or the decision maker can ask for the closest counterpart in the actual Pareto optimal set. If desired, (s)he can continue with another interactive method from the solution obtained. Pareto navigator can be seen as a nonlinear extension of the linear Pareto race method. After the representative set of Pareto optimal solutions has been generated, Pareto navigator is computationally efficient because the computations are performed in the polyhedral approximation and for that reason function evaluations of the actual objective functions are not needed. Thus, the method is well suited especially for problems with computationally costly functions. Furthermore, thanks to the visualization technique used, the method is applicable also for problems with three or more objective functions, and in fact it is best suited for such problems. After introducing the method in more detail, we illustrate it and the underlying ideas with an example.     

Handling constraints using multiobjective optimization concepts

In this paper, we propose a new constraint‐handling technique for evolutionary algorithms which we call inverted‐shrinkable PAES (IS‐PAES). This approach combines the use of multiobjective optimization concepts with a mechanism that focuses the search effort onto specific areas of the feasible region by shrinking the constrained search space. IS‐PAES also uses an adaptive grid to store the solutions found, but has a more efficient memory‐management scheme than its ancestor (the Pareto archived evolution strategy for multiobjective optimization). The proposed approach is validated using several examples taken from the standard evolutionary and engineering optimization literature. Comparisons are provided with respect to the stochastic ranking method (one of the most competitive constraint‐handling approaches used with evolutionary algorithms currently available) and with respect to other four multiobjective‐based constraint‐handling techniques. Copyright© 2004 John Wiley & Sons, Ltd.     

Bi-objective reentrant hybrid flowshop scheduling: an iterated Pareto greedy algorithm

The multi-objective reentrant hybrid flowshop scheduling problem (RHFSP) exhibits significance in many industrial applications, but appears under-studied in the literature. In this study, an iterated Pareto greedy (IPG) algorithm is proposed to solve a RHFSP with the bi-objective of minimising makespan and total tardiness. The performance of the proposed IPG algorithm is evaluated by comparing its solutions to existing meta-heuristic algorithms on the same benchmark problem set. Experimental results show that the proposed IPG algorithm significantly outperforms the best available algorithms in terms of the convergence to optimal solutions, the diversity of solutions and the dominance of solutions. The statistical analysis manifestly shows that the proposed IPG algorithm can serve as a new benchmark approach for future research on this extremely challenging scheduling problem.     

遗传算法在轮胎结构多目标优化设计中的应用

在轮胎结构设计中应用一种基于共享小生境技术的遗传算法(简称Pareto GA),用来求解多目标优化问题的Pareto最优解集合。在综合考虑轮胎带束层的耐久性和轮胎重量的基础上,通过三维有限元分析和室内耐久性试验建立了优化轮胎带束层的数学模型,采用Pareto遗传算法对该数学模型进行求解,获得了分散性很好的Pareto最优解集合。为了检验优化的效果,应用三维有限元分析技术,对优化胎与原胎进行了分析与对比。结果表明,该优化过程达到了预期的目的。     

Ant algorithm for single and multiobjective reliability optimization problems

The paper illustrates the application of the ant colony optimization algorithm to solve both continuous function and combinatorial optimization problems in reliability engineering. The ant algorithm is combined with the strength Pareto fitness assignment procedure to handle multiobjective problems. Further, a clustering procedure has been applied to prune the Pareto set and to maintain diversity. Benchmark case examples show the superiority of the ant algorithm to such problems. Copyright © 2002 John Wiley & Sons, Ltd.     

Simulation and Optimization of Wiped-Film Poly-Ethylene Terephthalate (PET) Reactor Using Multiobjective Differential Evolution (MODE)

The multiobjective differential evolution (MODE), which is an extension of the Differential Evolution (DE), is applied to solve the multiobjective optimization problem (MOOP) of wet film Poly-Ethylene Terephthalate (PET) reactor considering minimization of acid end group and vinyl end group as the main objectives. The objective function is modified to solve five different possible cases. The results show that a Pareto set (a set of equally good solutions) is obtained for the cases when two of the parameters (residence time of the polymeric reaction mass, θ, and the speed of the wiped-film agitator, N) are considered as decision variables, unlike a unique solution obtained using Nondominated Sorting Genetic Algorithm (NSGA). The Pareto optimal front provides wide-ranging optimal sets of operating conditions. And an appropriate set of operating conditions can be selected based on the requirements of the user.     

A method for simulation based optimization using radial basis functions

We propose an algorithm for the global optimization of expensive and noisy black box functions using a surrogate model based on radial basis functions (RBFs). A method for RBF-based approximation is introduced in order to handle noise. New points are selected to minimize the total model uncertainty weighted against the surrogate function value. The algorithm is extended to multiple objective functions by instead weighting against the distance to the surrogate Pareto front; it therefore constitutes the first algorithm for expensive, noisy and multiobjective problems in the literature. Numerical results on analytical test functions show promise in comparison to other (commercial) algorithms, as well as results from a simulation based optimization problem.     

Modelling and optimisation of energy-efficient U-shaped robotic assembly line balancing problems

Within U-shaped assembly lines, the increase of labour costs and subsequent utilisation of robots has led to growing energy consumption, which is the current main expense of auto and electronics industries. However, there are limited researches concerning both energy consumption reduction and productivity improvement on U-shaped robotic assembly lines. This paper first develops a nonlinear multi-objective mixed-integer programming model, reformulates it into a linear form by linearising the multiplication of two binary variables, and then refines the weight of multiple objectives so as to achieve a better approximation of true Pareto frontiers. In addition, Pareto artificial bee colony algorithm (PABC) is extended to tackle this new complex problem. This algorithm stores all the non-dominated solutions into a permanent archive set to keep all the good genes, and selects one solution from this set to overcome the strong local minima. Comparative experiments based on a set of newly generated benchmarks verify the superiority of the proposed PABC over four multi-objective algorithms in terms of generation distance, maximum spread, hypervolume ratio and the ratio of non-dominated solution.     

Multiobjective optimization with an adaptive weight determination scheme using the concept of hyperplane

Finding an optimum design that satisfies all performances in a design problem is very challenging. To overcome this problem, multiobjective optimization methods have been researched to obtain Pareto optimum solutions. Among the different methods, the weighted sum method is widely used for its convenience. However, since the different weights do not always guarantee evenly distributed solutions on the Pareto front, the weights need to be determined systematically. Therefore, this paper presents a multiobjective optimization using a new adaptive weight determination scheme. Solutions on the Pareto front are gradually found with different weights, and the values of these weights are adaptively determined by using information from the previously obtained solutions' positions. For an n-objective problem, a hyperplane is constructed in n -dimensional space, and new weights are calculated to find the next solutions. To confirm the effectiveness of the proposed method, benchmarking problems that have different types of Pareto front are tested, and a topology optimization problem is performed as an engineering problem. A hypervolume indicator is used to quantitatively evaluate the proposed method, and it is confirmed that optimized solutions that are evenly distributed on the Pareto front can be obtained by using the proposed method.