Synthesis,characterization, conductivity,band gap,and kinetic of thermal degradation of poly‐4‐[(2‐mercaptophenyl) imino methyl] phenol

The oxidative polycondensation reaction conditions of 4‐[(2‐mercaptophenyl) imino methyl] phenol (2‐MPIMP) were studied in an aqueous acidic medium between 40 and 90°C by using oxidants such as air, H₂O₂, and NaOCl. The structures of the synthesized monomer and polymer were confirmed by FTIR, ¹H NMR, ¹³C NMR, and elemental analysis. The characterization was made by TGA‐DTA, size exclusion chromatography (SEC) and solubility tests. At the optimum reaction conditions, the yield of poly‐4‐[(2‐mercaptophenyl) imino methyl]phenol (P‐2‐MPIMP) was found to be 92% for NaOCl oxidant, 84% for H₂O₂ oxidant 54% for air oxidant. According to the SEC analysis, the number‐average molecular weight (M_n), weight‐average molecular weight (M_w), and polydispersity index values of P‐2‐MPIMP were found to be 1700 g mol^?1, 1900 g mol^?1, and 1.118, using H₂O₂; 3100 g mol^?1, 3400 g mol^?1, and 1.097, using air; and 6750 g mol^?1, 6900 g mol^?1, and 1.022, using NaOCl, respectively. According to TG analysis, the weight losses of 2‐MPIMP and P‐2‐MPIMP were found to be 95.93% and 76.41% at 1000°C, respectively. P‐2‐MPIMP showed higher stability against thermal decomposition. Also, electrical conductivity of the P‐2‐MPIMP was measured, showing that the polymer is a typical semiconductor. The highest occupied molecular orbital, the lowest unoccupied molecular orbital, and the electrochemical energy gaps (E′_g) of 2‐MPIMP and P‐2‐MPIMP were found to be ?6.13, ?6.09; ?2.65, ?2.67; and 3.48, 3.42 eV, respectively. Kinetic and thermodynamic parameters of these compounds investigated by MacCallum‐Tanner and van Krevelen methods. The values of the apparent activation energies of thermal decomposition (E_a), the reaction order (n), pre‐exponential factor (A), the entropy change (ΔS*), enthalpy change (ΔH*), and free energy change (ΔG*) were calculated from the TGA curves of compounds. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Synthesis,characterization, thermal stability,conductivity, and band gap of a new aromatic polyether containing an azomethine as a side

In this study, the oxidative polycondensation reaction conditions of 4‐[(4‐methylphenyl)iminomethyl]phenol (4‐MPIMP) were studied by using oxidants such as air O₂, H₂O₂, and NaOCl in an aqueous alkaline medium between 50 and 90°C. The structures of the synthesized monomer and polymer were confirmed by FTIR, UV–vis, ¹H–¹³C‐NMR, and elemental analysis. The characterization was made by TGA‐DTA, size exclusion chromatography (SEC), and solubility tests. At the optimum reaction conditions, the yield of poly‐4‐[(4‐methylphenyl)iminomethyl]phenol (P‐4‐MPIMP) was found to be 28% for air O₂ oxidant, 42% for H₂O₂ oxidant, and 62% for NaOCl oxidant. According to the SEC analysis, the number–average molecular weight (M_n), weight–average molecular weight (M_w), and polydispersity index values of P‐4‐MPIMP were found to be 4400 g mol^?1, 5100 g mol^?1, and 1.159, using H₂O₂, and 4650 g mol^?1, 5200 g mol^?1, and 1.118, using air O₂, and 5100 g mol^?1, 5900 g mol^?1, and 1.157, using NaOCl, respectively. According to TG analysis, the weight losses of 4‐MPIMP and P‐4‐MPIMP were found to be 85.37% and 72.19% at 1000°C, respectively. P‐4‐MPIMP showed higher stability against thermal decomposition. Also, electrical conductivity of the P‐4‐MPIMP was measured, showing that the polymer is a typical semiconductor. The highest occupied molecular orbital and the lowest unoccupied molecular orbital energy levels and electrochemical energy gaps (E) of 4‐MPIMP and P‐4‐MPIMP were found to be ?5.76, ?5.19; ?3.00, ?3.24; 2.76 and 1.95 eV, respectively. According to UV–vis measurements, optical band gaps (E_g) of 4‐MPIMP and P‐4‐MPIMP were found to be 3.34 and 2.82 eV, respectively. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Synthesis,characterization, and antimicrobial properties of oligo‐4‐[(pyridine‐3‐yl‐methylene) amino] phenol

The oxidative polycondensation reaction conditions of 4‐[(pyridine‐3‐yl‐methylene) amino]phenol (4‐PMAP) were studied using H₂O₂, atmospheric O₂, and NaOCl oxidants in an aqueous alkaline medium between 30°C and 90°C. Synthesized oligo‐4‐[(pyridine‐3‐yl‐methylene) amino] phenol (O‐4‐PMAP) was characterized by ¹H‐, ¹³C NMR, FTIR, UV–vis, size exclusion chromatography (SEC), and elemental analysis techniques. The yield of O‐4‐PMAP was found to be 32% (for H₂O₂ oxidant), 68% (for atmospheric O₂ oxidant), and 82% (for NaOCl oxidant). According to the SEC analysis, the number–average molecular weight, weight–average molecular weight, and polydispersity index values of O‐4‐PMAP was found to be 5767, 6646 g mol^?1, and 1.152, respectively, using H₂O₂, and 4540, 5139 g mol^?1, and 1.132, respectively, using atmospheric O₂, and 9037, 9235 g mol^?1, and 1.022, using NaOCl, respectively. According to TG and DSC analyses, O‐4‐PMAP was more stable than 4‐PMAP against thermal decomposition. The weight loss of O‐4‐PMAP was found to be 94.80% at 1000°C. Also, antimicrobial activities of the oligomer were tested against B. cereus, L. monocytogenes, B. megaterium, B. subtilis, E. coli, Str. thermophilus, M. smegmatis, B. brevis, E. aeroginesa, P. vulgaris, M. luteus, S. aureus, and B. jeoreseens. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 3327–3333, 2006     

Synthesis, characterization and optimum reaction conditions of oligo-2-amino-3-hydroxypyridine and its Schiff base oligomer

The oxidative polycondensation reaction conditions of 2-amino-3-hydroxypyridine (AHP) and 2-[benzilydeneimino] pyridine-3-ol (BIP) were studied by oxidants such as with air O₂, NaOCl and H₂O₂. Oligo-2-amino-3-hydroxypyridine (OAHP) was synthesized from the oxidative polycondensation of AHP with air O₂, NaOCl and H₂O₂ in an aqueous acidic and alkaline medium at 30-90 °C. BIP was synthesized from condensation of 2-amino-3-hydroxypyridine with benzaldehyde. Oligo-2-[benzilydeneimino] pyridine-3-ol (OBIP) was synthesized from the oxidative polycondensation of BIP with air O₂, NaOCl and H₂O₂ in an aqueous alkaline medium at 40-90 °C. About 95% BIP was converted to OBIP. The number average molecular weight, (M_n) weight average molecular weight (M_w) and polydispersity index (PDI) values of OAHP and OBIP (for air O₂ oxidant) were found to be 1433, 1912 g mol⁻¹, 1.33 and 2637, 5106 g mol⁻¹ and 1.94, respectively. At the optimum reaction conditions, the yield of OAHP was found to be 86.0% (for air O₂ oxidant), 43.0% (for H₂O₂ oxidant) and 85.0% (for NaOCl oxidant). At the optimum reaction conditions, the yield of OBIP was found to be 91.0% (for air O₂ oxidant), 92.0% (for H₂O₂ oxidant) and 95.0% (for NaOCl oxidant). The OHAP and OBIP were characterized by FT-IR, UV-Vis, ¹H and ¹³C-NMR elemental analysis. TG and DTA analyses were shown to be unstable of OAHP and OBIP against thermo-oxidative decomposition. According to TG analyses, the weight loss of OAHP and OBIP was found to be 97.35 and 96.60% at 520 and 685 °C, respectively.     

Synthesis of oligo‐ortho‐azomethinephenol and its oligomer–metal complexes: Characterization and application as anti‐microbial agents

The oxidative polycondensation reaction conditions and optimum parameters of o‐phenylazomethinephenol (PAP) with oxygen (air) and NaOCl were determined in an aqueous alkaline solution at 60–98°C. The properties of oligo‐o‐phenylazomethinephenol (OPAP) were studied by chemical and spectra analyses. PAP was converted to dimers and trimers (25–60%) by oxidation in an aqueous alkaline medium. The number average molecular weight (M_n), mass average molecular weight (M_w), and polydispersity index (PDI) values were 1180 g mol^?1, 1930 g mol^?1, and 1.64, respectively. According to these values, 20–33% of PAP turned into OPAP. During the polycondensation reaction, a part of the azomethine (? CH?N? ) groups oxidized to carboxylic (? COOH) group. Thus, a water‐soluble fraction of OPAP was incorporated in the carboxylic (? COOH); (2–20%) group. Also, the structure and properties of oligomer–metal complexes of OPAP with Cu(II), Ni(II), Zn(II), and Co(II) were studied. Antimicrobial activites of the oligomer and its oligomer–metal complexes were tested against B. cereus, L. monocytogenes, B. megaterium, B. subtilis, E. coli, Str. thermophilus, M. smegmatis, B. brevis, E. aeroginesa, P. vulgaris, M. luteus, S. aureus, and B. jeoreseens. Also, according to differential thermal analysis and thermogravimetric analysis, OPAP and its oligomer–metal complexes were stable throughout to temperature and thermo‐oxidative decomposition. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 2004–2013, 2002     

Synthesis,characterization, and thermal stability of azomethine oligomer and its metal complexes

The oxidative polycondensation reaction conditions of N,N′‐bis[(2‐hydroxy‐1‐naphthyl)methylene]urea (2‐HNMU) has been accomplished using NaOCl, H₂O₂, and air O₂ oxidants in an aqueous alkaline medium. The structures of the obtained monomer and oligomer were confirmed by FTIR, UV–vis, ¹H NMR, ¹³C NMR, and elemental analysis. The characterization was made by TG‐DTA, size exclusion chromatography (SEC), and solubility tests. At the optimum reaction conditions, the yield of oligo‐N,N′‐bis[(2‐hydroxy‐1‐naphthyl)methylene]urea (O‐2‐HNMU) was found to be 95% (for air O₂ oxidant), 51% (for H₂O₂ oxidant), 96% (for NaOCl oxidant). According to the SEC analysis, the number‐average molecular weight (M_n), weight‐average molecular weight (M_w), and polydispersity index values of O‐2‐HNMU was found to be 1036, 1225 g/mol, and 1.182, respectively, using H₂O₂, and 765, 1080 g/mol, and 1.412, respectively, using air O₂, and 857, 1105 g/mol, and 1.289, respectively, using NaOCl. TG‐DTA analyses showed that O‐2‐HNMU was more stable than 2‐HNMU. According to TG analyses, the carbonaceous residue of 2‐HNMU and O‐2‐HNMU was found to be 0.49% and 2.11% at 1000°C, respectively. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007     

Synthesis,characterization, and thermal degradation of oligo‐2‐(morpholinoiminomethyl)phenol and its Pb(II) complex compound

The oxidative polycondensation reaction conditions of 2‐(morpholinoiminomethyl)phenol were studied with H₂O₂, air O₂, and sodium hypochloride (NaOCl) oxidants in an aqueous alkaline medium between 40 and 90°C. The structure of oligo‐2‐(morpholinoiminomethyl)phenol was characterized with ¹H‐ and ¹³C‐NMR, Fourier transform infrared, ultraviolet–visible, size exclusion chromatography, and elemental analysis techniques. Under the optimum reaction conditions, the yield of oligo‐2‐(morpholinoiminomethyl)phenol was 28% for the H₂O₂ oxidant, 12% for the air O₂ oxidant, and 58% for the NaOCl oxidant. According to the size exclusion chromatography analysis, the number‐average molecular weight, weight‐average molecular weight, and polydispersity index of oligo‐2‐(morpholinoiminomethyl)phenol were 2420 g/mol, 2740 g/mol, and 1.187 with H₂O₂, 1425 g/mol, 2060 g/mol, and 1.446 with air O₂, and 1309 g/mol, 1401 g/mol, and 1.070 with NaOCl, respectively. Thermogravimetry/dynamic thermal analysis showed that the oligo‐2‐(morpholinoiminomethyl)phenol–lead complex compound was more stable than 2‐(morpholinoiminomethyl)phenol and oligo‐2‐(morpholinoiminomethyl)phenol against thermal degradation. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102:3795–3804, 2006     

The Oxidative Polycondensation of Benzylidene-4′-hydroxyanilene using Air O<Subscript>2</Subscript>, NaOCl and H<Subscript>2</Subscript>O<Subscript>2</Subscript>: Synthesis and Characterization

In this work, the oxidative polycondensation reaction conditions of benzylidene-4′-hydroxyanilene (B-4′-HA) were studied using oxidants such as air O₂, H₂O₂ and NaOCl in an aqueous alkaline medium between 40 and 95 ^○C. Oligo-benzylidene-4′-hydroxyanilene was characterized by ¹H-NMR, FT-IR, UV-Vis, size exclusion chromatography (SEC) and elemental analysis techniques. The solubility of oligomer using organic solvents such as DMF, THF, DMSO, methanol, ethanol, CHCl₃, CCl₄, toluene, acetonitrile, ethyl acetate was investigated. According to air O₂ oxidant (flow rate 8.5 L/h), the conversion of B-4′-HA was 82.0% in optimum conditions such as [B-4′-HA]₀=[KOH]₀=0.1015 mol/L at 50 ^○C for 25 h. According to the SEC analysis, the number-average molecular weight (M_n), weight-average molecular weight (M_w) and polydispersity index (PDI) values of O-B-4′-HA were found to be 1852 g mol⁻¹, 3101 g mol⁻¹ and 1.675; 2123 g mol⁻¹, 4073 g mol⁻¹ and 1.919; 2155 g mol⁻¹, 4164 g mol⁻¹ and 1.932, using air oxygen, NaOCl and H₂O₂ oxidants, respectively. Also, Thermo gravimetric analysis (TGA) showed oligo-benzylidene-4′-hydroxyanilene to be unstable against thermo-oxidative decomposition. The weight loss of O-B-4′-HA was found to be 95.87% at 1000 ^○C.     

Solvent extraction and separation of rare earths from chloride media using α-aminophosphonic acid extractant HEHAMP

Solvent extraction and separation of rare earths (REs: La ~ Lu, plus Y and Sc) by a novel synthesized extractant, (2-ethylhexylamino)methyl phosphonic acid mono-2-ethylhexyl ester (HEHAMP, abbreviated as H₂A₂), were investigated in chloride medium. The favorable separation factors (SFs) between adjacent heavy REs suggested that HEHAMP has a better separation performance than P507. The extracted complex of trivalent REs was determined to be REClH₂A₄ by the slope analysis method. Thermodynamic parameters (ΔH, ΔG, and ΔS) of Lu were calculated as 7.47 kJ mol^?1, ?6.05 kJ mol^?1, and 45.4 J mol^?1 K^?1 at 298.15 K, respectively, which indicate that the extraction reaction of Lu is an endothermic process. The loading capacity of 30% (v/v) HEHAMP toward Lu(III), Yb(III), and Y(III) was about 15.17 g Lu₂O₃/L, 14.46 g Yb₂O₃/L, and 12.64 g Y₂O₃/L, respectively. HCl is the most efficient stripping acid, and 92% of the loaded Yb(III) can be stripped by one-stage stripping with 2 mol/L HCl.     

Synthesis,characterization, and kinetic of thermal degradation of oligo‐2‐[(4‐bromophenylimino)methyl]phenol and oligomer‐metal complexes

Oligo‐2‐[(4‐bromophenylimino)methyl]phenol (OBPIMP) was synthesized from the oxidative polycondensation reaction of 2‐[(4‐bromophenylimino)methyl]phenol (BPIMP) with air and NaOCl oxidants in an aqueous alkaline medium between 50 and 90°C. The yield of OBPIMP was found to be 67 and 88% for air and NaOCl oxidants, respectively. Their structures were confirmed by elemental and spectral such as IR, ultraviolet–visible spectrophotometer (UV–vis), ¹H‐NMR, and ¹³C‐NMR analyses. The characterization was made by TG‐DTA, size exclusion chromatography, and solubility tests. The resulting complexes were characterized by electronic and IR spectral measurements, elemental analysis, AAS, and thermal studies. According to TG analyses, the weight losses of OBPIMP, and oligomer‐metal complexes with Co⁺², Ni⁺², and Cu⁺² ions were found to be 93.04%, 59.80%, 74.23%, and 59.30%, respectively, at 1000°C. Kinetic and thermodynamic parameters of these compounds investigated by Coats‐Redfern, MacCallum‐Tanner, and van Krevelen methods. The values of the apparent activation energies of thermal decomposition (E_a), the reaction order (n), preexponential factor (A), the entropy change (ΔS*), enthalpy change (ΔH*), and free energy change (ΔG*) obtained by earlier‐mentioned methods were all good in agreement with each other. It was found that the thermal stabilities of the complexes follow the order Cu(II) > Co(II) > Ni(II). © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

The synthesis and characterization of oligo-N-4-aminopyridine, oligo-2-[(pyridine-4-yl-imino) methyl] phenol and its some oligomer-metal complexes

The product and the oxidative polycondensation reaction conditions of oligo-4-aminopyridine were studied by using NaOCl as oxidant. Oligo-4-aminopyridine (4-OAP) was synthesized from the oxidative polycondensation of 4-aminopyridine (4-AP) in an aqueous solution medium acidic and neutral between 25 and 60 °C by using NaOCl as oxidant. About 85% of 4-AP was converted to 4-OAP. The number average molecular weight, (M_n) mass average molecular weight (M_w) and polydispersity index (PDI) values of 4-OAP synthesized were found to be 270, 850 g mol⁻¹ and 3.15, respectively, using NaOCl. The respective values of the Schiff base were 1721, 2256 g mol⁻¹ and 1.31, respectively, using air oxygen and 2173, 2372 g mol⁻¹ and 1.09, respectively, using NaOCl and 2749, 6432 g mol⁻¹ and 2.33, respectively, using H₂O₂. At the optimum reaction conditions, the yield of oligo-2-[(pyridine-4-yl-imino) methyl] phenol (OPMP) were found to be 86% (H₂O₂) and 89% (NaOCl) and 95% (air oxygen). The 4-OAP and OPMP were characterized by ¹H NMR, FT-IR, UV-Vis and elemental analysis. TG analysis showed to be stable of 4-OAP against thermo-oxidative decomposition. The weight loss of 4-OAP and its Schiff base oligomer was found to be 50, 86.39 and 71.78% at 525, 625 and 1000 °C, respectively. Also, new oligomeric Schiff base was synthesized from condensation of 4-AP with salicylaldehyde and their structures and properties were determined. During polycondensation reaction, a part of the azomethine (-CHN-) groups oxidized to carboxylic (-COOH) group. Thus, soluble fraction in water of oligo-2-[(pyridine-4-yl-imino) methyl] phenol involved in carboxylic (-COOH) (11%) group. Besides, the structure and properties of oligomer-metal complexes of oligo-2-[(pyridine-4-yl-imino) methyl] phenol (OPMP) with Cu(II), Ni(II) and Co(II) were studied.     

Synthesis, Characterization and Anti-microbial Activity of Oligo-N-2-aminopyridinylsalicylaldimine and Some Oligomer-metal Complexes

The oxidative polycondensation and optimum reaction conditions of N-2-aminopyridinylsalicylaldimine using air oxygen, H₂O₂ and NaOCl were determined in an aqueous alkaline solution between 40–90°C. Oligo-N-2-aminopyridinylsalicylaldimine (OAPSA) was characterized by using ¹H-NMR, FT-IR, UV-vis and elemental analysis. N-2-aminopyridinylsalicylaldimine was converted to oligomer by oxidizing in an aqueous alkaline medium. The number average molecular weight (M _n), weight average molecular weight (M _w) and polydispersity index (PDI) values were found to be 7487 gmol^–1, 7901 gmol^–1 and 1.06, respectively. According to these values, 70% of N-2-aminopyridinylsalicylaldimine turned into oligo-N-2-aminopyridinylsalicylaldimine. During the polycondensation reaction, a part of the azomethine (–CH=N–) groups oxidized to carboxylic (–COOH) group. Besides, the structure and properties of oligomer-metal complexes of oligo-N-2-aminopyridinyl salicylaldimine (OAPSA) with Cu (II), Ni (II), and Co (II) were studied by FT-IR, UV-vis DTA, TG and elemental analysis. Anti-microbial activities of the oligomer and its oligomer-metal complexes have been tested against C. albicans, L. monocytogenes, B. megaterium, E. coli, M. smegmatis, E. aeroginesa, P. fluorescen and B. jeoreseens. Also, according to the TG and DTA analyses, oligo-N-2-aminopyridinylsalicylaldimine and its oligomer-metal complexes were found to be stable thermo-oxidative decomposition. The weight loss of OAPSA found to be 20%, 50% and 98% at 350°C, 535°C and 1000°C, respectively.     

Synthesis,properties and pyrolysis of siloxane‐ and imide‐modified epoxy resin cured with siloxane‐containing dianhydride

Hydrosilylation of nadic anhydride with tetramethyl disiloxane yielded 5,5′‐(1,1,3,3‐tetramethyl disiloxane‐1,3‐diyl)‐bis‐norborane‐2,3‐dicarboxylic anhydride (I), which further reacted with 4‐aminophenol to give N,N′‐bis(4‐hydroxyphenyl)‐5,5′‐bis‐(1,1,3,3‐tetramethyl disiloxane‐1,3‐diyl)‐bis‐norborane‐2,3‐dicarboximide (II). Epoxidation of II with excess epichlorohydrin formed a siloxane‐ and imide‐modified epoxy oligomer (ie diglycidyl ether of N,N′‐bis(4‐hydroxyphenyl)‐5,5′‐bis(1,1,3,3‐tetramethyl disiloxane‐1,3‐diyl)‐bis‐norborane‐2,3‐dicarboximide) (III). Equivalent ratios of III/I of 1/1 and 1/0.8 were prepared and cured to produce crosslinked materials. Thermal mechanical and dynamic mechanical properties were investigated by TMA and DMA, respectively. It was noted that each of these two materials showed a glass transition temperature (T_g) higher than 160 °C with moderate moduli. The thermal degradation kinetics was studied with dynamic thermogravimetric analysis (TGA) and the estimated apparent activation energies were 111.4 kJ mol^?1 (in N₂), 117.1 kJ mol^?1 (in air) for III/I = 1/0.8, and 149.2 kJ mol^?1 (in N₂), 147.6 kJ mol^?1 (in air) for III/I = 1/1. The white flaky residue of the TGA char was confirmed to be silicon dioxide, which formed a barrier at the surface of the polymer matrix and, in part, accounted for the unique heat resistance of this material. Copyright © 2005 Society of Chemical Industry     

Kinetic analysis of Li|Li+ interphase in an ionic liquid electrolyte

Kinetic analysis of the Li|Li⁺ interphase in an electrolyte based on N-metyl-N-propylpyrrolidinium bis(trifluoromethanesulfon)imide ionic liquid (MPPyrrTFSI) and lithium bis(trifluoromethanesulfon)imide salt (LiTFSI) was performed. Li|electrolyte|Li and LiC₆|electrolyte|Li cells were galvanostatically charged/discharged in order to form solid electrolyte interphase (SEI) protecting layer. SEM images showed that the surface of both Li and LiC₆ anodes was covered with small particles. The fitting procedure of electrochemical impedance data taken at different temperatures gave three resistances (R _el, R _SEI, R _ct) and hence, three lnR = f(T ^?1) straight lines of different slopes. Specific conductivity and activation energy of the conduction process of the liquid electrolyte, were ca. σ = 2.5 mS cm^?1 (at T = 25.0 °C) and $ E_{\text{el}}^{\# } $  = 15 kJ mol^?1. Activation energy for the conduction process in the SEI layer was ca. 56 kJ mol^?1 in the case of the metallic lithium and 62 kJ mol^?1 for the graphite anode. Activation energy of the charge transfer process, $ E_{\text{ct}}^{\# } $ , for Li and LiC₆ anodes was 71 and 65 kJ mol^?1, respectively. Analysis of literature data for different electrolytes suggests that the $ E_{\text{ct}}^{\# } $ value for Li⁺ reduction may be approximated by 57 ± 5 kJ mol^?1. Activation energy for the diffusion processes in the graphite electrode, detected from the Warburg coefficient, was ca 74 kJ mol^?1.     

Synthesis,Characterization and Conductivity Properties of Novel Oligomer Schiff Bases Derived from 4-Amino-3-hydrazino-5-mercapto-1, 2, 4-triazole and Their Reactions with VO(IV), Cu(II) Ions

A new Schiff base, 4-(4-hydroxysalicylidenamino)-3-hydrazino-5-mercapto-1,2,4-triazole (4HSAHMT), and novel Schiff base oligomers of 4-salicylidenamino-3-hydrazino-5-mercapto-1,2,4-triazole (SAHMT), 4-(2-hydroxynaphthylidenamino)-3-hydrazino-5-mercapto-1,2,4-triazole (2HNAHMT), 4-(4-hydroxysalicylidenamino)-3-hydrazino-5-mercapto-1,2,4-triazole (4HSAHMT) and 4-(5-bromosalicylidenamino)-3-hydrazino-5-mercapto-1,2,4-triazole (BrSAHMT) were synthesized via oxidative polymerization using NaOCl as the oxidant. The structures of the oligomers were supported by FT-IR, UV–Vis, ¹H-NMR, and ¹³C-NMR techniques. The compounds were further characterized by solubility tests, TG–DTA, and elemental analysis. The molecular weight distribution parameters of the compounds were determined by the size exclusion chromatography (SEC). According to SEC, the number average molecular weight (M _n ) values of O-SAHMT, O-BrSAHMT, O-4HSAHMT and O-2HNAHMT were 2,700, 2,100, 2,700 and 1,000 g mol^?1, respectively. The weight losses of O-SAHMT, O-BrSAHMT, O-4HSAHMT and O-2HNAHMT were 73, 76, 80 and 54 %, respectively, at 1,000 °C. TG analyses showed that the synthesized oligomers were stable toward thermal decomposition. The synthesized oligomers were converted to metal complexes with salts of VO(IV) and Cu(II). The doped and undoped electrical properties of oligomers and oligomer–metal complexes were determined by the four-point probe technique at room temperature and atmospheric pressure.     

Synthesis,characterization, thermal stability and electrochemical properties of <Emphasis Type="Italic">ortho</Emphasis>-imine-functionalized oligophenol via enzymatic oxidative polycondensation

Ortho-imine functionalized oligophenol was synthesized via enzymatic polymerization of 2-((4-nitrophenylimino)methyl)phenol (NPIMP). Enzymatic polymerization was catalyzed by Horseradish peroxidase (HRP) enzyme and hydrogen peroxide (H₂O₂) oxidizer yielded oligophenol with imine functionality on the side-chain. Effects of various factors including reaction pH, temperature and solvent system on the polymerization were studied. Optimum polymerization with the highest yield (96 %) and number-average molecular weight (M _n = 7300 g/mol, degree of polymerization ≈ 30) was accomplished using equivolume mixture of acetone/pH 7.0 phosphate buffer medium at 35 °C in 24 h under air. Characterization of the resulting oligomer was accomplished by ultraviolet-visible spectroscopy (UV-Vis), fourier transform infrared spectroscopy (FT-IR), ¹H and ¹³C nuclear magnetic resonance (¹H and ¹³C NMR), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), cyclic voltammetry (CV) and gel permeation chromatography (GPC). The polymerization involved elimination of hydrogen from NPIMP, and the oligomer possessed phenolic –OH end groups. The oligomer backbone was composed of oxyphenylene and phenylene repeat units. The optical band gaps (Eg) of NPIMP and oligo(NPIMP) were measured as 3.21 and 3.39 Eg, respectively. Thermal stability of the oligo(NPIMP) was also found to be relatively high, and lost 5 % of its mass at 175 °C and lost 50 % of its mass at 600 °C.     

Synthesis, Characterization, Conductivity, Band Gap, and Thermal Analysis of Poly-[(2-mercaptophenyl)iminomethyl]-2-naphthol and Its Polymer–Metal Complexes

Oxidative polycondensation reaction conditions of [(2-mercaptophenyl)iminomethyl]-2-naphthol (2-MPIM-2N) were studied using oxidants such as air and NaOCl in an aqueous alkaline medium between 40 °C and 90 °C. The structure of poly-[(2-mercaptophenyl)iminomethyl]-2-naphthol (P-2-MPIM-2N) was characterized by ¹H- ¹³C NMR, FT-IR, and UV–Vis spectroscopy, size exclusion chromatography (SEC), and elemental analysis. At optimum reaction conditions, the yield of P-2-MPIM-2N was found to be 78 and 82% for air and NaOCl oxidants, respectively. From SEC measurements, the number-average molecular weight (M _n ), weight-average molecular weight (M _w ) and polydispersity index (PDI) of P-2-MPIM-2N are 2900, 3500 g mol⁻¹ and 1.207; 2200, 2500 g mol⁻¹ and 1.136, for air and NaOCl oxidants, respectively. Polymer–metal complexes were synthesized by the reaction of P-2-MPIM-2N with Co²⁺, Cu²⁺, Zn²⁺, Pb²⁺ and Cd²⁺ ions. The highest occupied molecular orbital (HOMO), the lowest unoccupied molecular orbital (LUMO), and electrochemical band gaps (E^￠_g E^{\prime}_{g} ) of 2-MPIM-2N and P-2-MPIM-2N were −5.97, −2.66 and 3.31 eV and −5.82, −2.68 and 3.14 eV, respectively. The conductivity of polymer and polymer–metal complexes were determined in the solid state. Conductivity measurements of doped and undoped Schiff base polymer and polymer–metal complexes were carried out at room temperature and atmospheric pressure by the four-point probe technique using an electrometer. The conductivities of the polymer and polymer–metal complexes increased when iodine was used as doping agent.     

Synthesis of Pure VSH-2 in Large Quantities and Its Characterization

A method to produce pure VSH-2 in large quantities (~20 g) was developed. The reagents were silica sol, V₂O₅, H₂SO₄, CsOH, and ethanol. Despite the fact that V₂O₅ was used as the vanadium source the oxidation states of most of the vanadium atoms in the produced VSH-2 were 4+, indicating that ethanol acts as a reducing agent. The crystals adopted individual octahedral shapes or aggregated states depending on the gel composition. The total surface area of the pristine VSH-2 with the general formula of Cs₂(VO)(Si₆O₁₄)·3H₂O was only 40 m²/g, indicating that the pores are blocked by the large Cs⁺ ions. The surface area increased to 149 m²/g upon exchanging Cs⁺ with Na⁺. Analyses of the diffuse reflectance UV–Vis spectra of Mⁿ⁺–VSH-2 (Mⁿ⁺ = Cs⁺, Na⁺, Ca²⁺, and Pb²⁺) revealed that the 215, 250, and 313 nm bands arise due to the V⁴⁺ to O^2? metal-to-ligand charge transfer (MLCT) and the 437, 590, and 914 nm bands arise due to the d–d transition of V⁴⁺. This reveals an unprecedented interesting situation that in dehydrated VSH-2 the framework oxide plays the role of both acceptor to V⁴⁺ and donor to Mⁿ⁺. The measured atomic magnetic moment (μ) was 1.64 BM, indicating that most of the V atoms exist in V⁴⁺. The ESR spectrum of VSH-2 showed a strong signal due to V⁴⁺ with the g value of 1.959 with ΔH_pp value of 168 G. The Raman spectra of Mⁿ⁺–VSH-2 revealed the existence of strong V=O stretching at 960 cm^?1, and other weak peaks. The V=O stretching band shifted to a higher energy region upon increasing the Sanderson’s electronegativity of Mⁿ⁺. The thermogravimetric (TGA) analysis showed that VSH-2 is thermally stable up to 550 °C and above which the oxidation of V⁴⁺ occurs.     

Study on Synthesis, Characterization, Thermal Stability and Conductivity Properties of a New Conjugated Oligoazomethine and some of its Metal Complexes

A novel azomethine oligomer of 2,3-bis[(2-hydroxyphenyl)methylene]diaminopyridine (HPMDAP) was first synthesized by oxidative polycondensation reaction using air and NaOCl as oxidative agents. Optimum reaction conditions for the oxidative polycondensation and the main parameters of the process were established. At optimum reaction conditions, the yield of the product was found to be 69%. Oligomeric complexes of 2,3-bis[(2-hydroxyphenyl)methylene]diaminopyridine with Cd(II), Co(II), Cu(II), Ni(II), Fe(II), Pb(II), Cr(III) and Zn(II) were successfully prepared. Structures of monomer, oligomer and some oligomer metal complexes obtained were confirmed by FT-IR, UV–vis, ¹H- and ¹³C-NMR and elemental analysis. Characterization was carried out by TG-DTA, size exclusion chromatography (SEC), magnetic moment and solubility tests. The ¹H- and ¹³C-NMR data showed that polymerization proceed by C–C coupling of ortho and para positions according to –OH group of HPMDAP. Elemental analysis of chelates suggests that the metal ligand ratio is about 1:2. Molecular weight distribution values of the products were determined by size exclusion chromatography (SEC). According to TG analyses, the carbonaceous residues of HPMDAP and OHPMDAP were found to be 34.94 and 29.36% at 1000 °C, respectively. Thermal analyses of Cd, Co, Cu, Ni, Fe, Pb, Cr and Zn oligomer–metal complexes were also investigated under N₂ atmosphere between 15 and 1000 °C. Electrical conductivities of OHPMDAP and its metal complexes were also measured with four probe technique.     

Homogeneous Liquid–Liquid Extraction and Determination of Cobalt,Copper, and Nickel in Water Samples by Flame Atomic Absorption Spectrometry

Abstract

A simple and effective homogeneous liquid–liquid extraction method has been used for the simultaneous extraction and preconcentration of cobalt, copper, and nickel after the formation of complex with 4‐benzylpiperidinedithiocarbamate potassium salt (K‐4‐BPDC), and later they were determined by flame atomic absorption spectrometry (FAAS) using (water/tetrabutylammonium ion (TBA⁺)/chloroform) as a ternary component system. The phase separation phenomenon occurred by an ion‐pair formation of TBA⁺ and perchlorate ion. After the optimization of complexation and extraction conditions ([K‐4‐BPDC]=2.0×10^?4 mol l^?1, [TBA⁺]=2.0×10^?2 mol l^?1, [CHCl₃]=60.0 µl, [ClO₄ ^?]=2.0 ×10^?2 mol l ^?1 and pH=6.0), a preconcentration factor of 200 was obtained for only 10 ml of the sample.

The analytical curves were linear in the range of 20–1500, 15–2000, 35–1600 µg l^?1 and the limits of detection were 10, 5, and 15 µg l^?1 for Co²⁺, Cu²⁺, and Ni²⁺, respectively. The proposed method was applied for the extraction and determination of Co²⁺, Cu²⁺, and Ni²⁺ in natural water samples with satisfactory results.